Supply Of Ferritic Steel Coils And Sheetferritic Steel Coils And Sheet, Ferritic Steel Sheet 5X1250 X 3000 Mm., As Per Drawing: Rdso Spec No.C-K201, Gra De X2crni12 ( 409M ) Table 1&2. Heat Treatment Condition 2D As Per Table-5., Packing Instructio N: Stainless Steel Sheets, Coils And Plates:- ( A ) Stainless Steel ( Austenitic & Ferritic S Teel ) Coils. The Coil Shall Be Protected In Reasonably Good Condition To Withstand Normal Handling Hazard During Transit With The Following Provision As The Barest Minimum: I ) Coil Should Be Wrapped With A Layer Of Water Proof Paper Through Out Whole Length. Ii ) Coil Should Be Wrapped With A Layer Of Biodegradeable Sheet. Iii ) O Uter & Inner Of Coil Should Be Wrapped With Gi Sheet. Iv ) Side Of The Coil Should Be C Overed With Card Board Sheet. V ) After This Whole Coil Should Be Wrapped With Biod Egradeable Plastic Sheet Of Suitable Thickness. Vi ) The Inner Edge Of The Coil Shoul D Be Protected By Gi Ring Followed By Another Iron Ring. Vii ) Outer Edge Of The Coil Should Be Wrapped With Gi Ring. Viii ) Coil Should Be Securely Strapped With Minium 5 Steel Bands Through The Eyes Of The Coil And Minium 3 Steel Bands On The Circumfer Ence Of The Eye. Ix ) Whole Coil Should Be Mounted On Wooden Blocks For Easy Liftin G / Stacking. X ) The Sheets In Coil Form For Thickness 2Mm And Above Shall Have: Inner Dia Of Coil 450-800Mm Outer Dia Of Coil 1000-1300Mm Weight Of Coil 2.4 - 10 Tonnes Xi ) The Sheets In Coil Form For Thickness Below 2Mm Shall Have: Inner Dia Of Coil 450-650Mm O Uter Dia Of Coil 1000-1300Mm Weight Of Coil 5.0 - 10 Tonnes. ( B ) Stainless Steel ( Austeniti C & Ferritic Steel Plates / Sheets ) I ) The Sheets / Plates Shall Be Supplied In Bundles Of Optimum Weight: 2Mt+ / -10% & Each Sheet / Plate Shall Be Seprated With A Layer Of Wate R Proof Paper, After This The Whole Bundle Should Be Wrapped With Double Layer O F Water Proof Paper And A Biodegradeable Plastic Sheet Of Suitable Thickness. A Me Tal Protection In Edges Should Also Be Provided. Ii ) All Bundles Shall Have A Minimum Of 2 Hoops Upto 1.2 Meter In Length And One Extra Hoop For Every Additional Meter. The Bundles Shall Also Be Provided With Skid ( Wooden Packing Under Neath ) To Facili Tate Handling. Mechanical Damange & Corrosion During Transit If Any Shall Be At Th E Cost Of Supplier. [ Warranty Period: 30 Months After The Date Of Delivery ] , Ferritic Steel Sheet 3X1250x3100 Mm., As Per Drawing: Rdso Spec. No. C-K201, Gra De X2crni12 ( 409M ) Table 1&2, Heat Treatment Condition 2B As Per Table-5., Packing Instructi On: Stainless Steel Sheets, Coils And Plates:- ( A ) Stainless Steel ( Austenitic & Ferritic Steel ) Coils. The Coil Shall Be Protected In Reasonably Good Condition To Withstand Normal Handling Hazard During Transit With The Following Provision As The Barest Minimum: I ) Coil Should Be Wrapped With A Layer Of Water Proof Paper Through Out Whole Length. Ii ) Coil Should Be Wrapped With A Layer Of Biodegradeable Sheet. Iii ) O Uter & Inner Of Coil Should Be Wrapped With Gi Sheet. Iv ) Side Of The Coil Should Be C Overed With Card Board Sheet. V ) After This Whole Coil Should Be Wrapped With Biod Egradeable Plastic Sheet Of Suitable Thickness. Vi ) The Inner Edge Of The Coil Shoul D Be Protected By Gi Ring Followed By Another Iron Ring. Vii ) Outer Edge Of The Coil Should Be Wrapped With Gi Ring. Viii ) Coil Should Be Securely Strapped With Minium 5 Steel Bands Through The Eyes Of The Coil And Minium 3 Steel Bands On The Circumfer Ence Of The Eye. Ix ) Whole Coil Should Be Mounted On Wooden Blocks For Easy Liftin G / Stacking. X ) The Sheets In Coil Form For Thickness 2Mm And Above Shall Have: Inner Dia Of Coil 450-800Mm Outer Dia Of Coil 1000-1300Mm Weight Of Coil 2.4 - 10 Tonnes Xi ) The Sheets In Coil Form For Thickness Below 2Mm Shall Have: Inner Dia Of Coil 450-650Mm O Uter Dia Of Coil 1000-1300Mm Weight Of Coil 5.0 - 10 Tonnes. ( B ) Stainless Steel ( Austeniti C & Ferritic Steel Plates / Sheets ) I ) The Sheets / Plates Shall Be Supplied In Bundles Of Optimum Weight: 2Mt+ / -10% & Each Sheet / Plate Shall Be Seprated With A Layer Of Wate R Proof Paper, After This The Whole Bundle Should Be Wrapped With Double Layer O F Water Proof Paper And A Biodegradeable Plastic Sheet Of Suitable Thickness. A Me Tal Protection In Edges Should Also Be Provided. Ii ) All Bundles Shall Have A Minimum Of 2 Hoops Upto 1.2 Meter In Length And One Extra Hoop For Every Additional Meter. The Bundles Shall Also Be Provided With Skid ( Wooden Packing Under Neath ) To Facili Tate Handling. Mechanical Damange & Corrosion During Transit If Any Shall Be At Th E Cost Of Supplier. [ Warranty Period: 30 Months After The Date Of Delivery ] , Ferritic Steel Sheet 4X1250x3100 Mm., As Per Drawing: Rdso Spec. No. C-K201, Gra De X2crni12 ( 409M ) Table 1&2, Heat Treatment Condition 2B As Per Table-5., Packing Instructi On: Stainless Steel Sheets, Coils And Plates:- ( A ) Stainless Steel ( Austenitic & Ferritic Steel ) Coils. The Coil Shall Be Protected In Reasonably Good Condition To Withstand Normal Handling Hazard During Transit With The Following Provision As The Barest Minimum: I ) Coil Should Be Wrapped With A Layer Of Water Proof Paper Through Out Whole Length. Ii ) Coil Should Be Wrapped With A Layer Of Biodegradeable Sheet. Iii ) O Uter & Inner Of Coil Should Be Wrapped With Gi Sheet. Iv ) Side Of The Coil Should Be C Overed With Card Board Sheet. V ) After This Whole Coil Should Be Wrapped With Biod Egradeable Plastic Sheet Of Suitable Thickness. Vi ) The Inner Edge Of The Coil Shoul D Be Protected By Gi Ring Followed By Another Iron Ring. Vii ) Outer Edge Of The Coil Should Be Wrapped With Gi Ring. Viii ) Coil Should Be Securely Strapped With Minium 5 Steel Bands Through The Eyes Of The Coil And Minium 3 Steel Bands On The Circumfer Ence Of The Eye. Ix ) Whole Coil Should Be Mounted On Wooden Blocks For Easy Liftin G / Stacking. X ) The Sheets In Coil Form For Thickness 2Mm And Above Shall Have: Inner Dia Of Coil 450-800Mm Outer Dia Of Coil 1000-1300Mm Weight Of Coil 2.4 - 10 Tonnes Xi ) The Sheets In Coil Form For Thickness Below 2Mm Shall Have: Inner Dia Of Coil 450-650Mm O Uter Dia Of Coil 1000-1300Mm Weight Of Coil 5.0 - 10 Tonnes. ( B ) Stainless Steel ( Austeniti C & Ferritic Steel Plates / Sheets ) I ) The Sheets / Plates Shall Be Supplied In Bundles Of Optimum Weight: 2Mt+ / -10% & Each Sheet / Plate Shall Be Seprated With A Layer Of Wate R Proof Paper, After This The Whole Bundle Should Be Wrapped With Double Layer O F Water Proof Paper And A Biodegradeable Plastic Sheet Of Suitable Thickness. A Me Tal Protection In Edges Should Also Be Provided. Ii ) All Bundles Shall Have A Minimum Of 2 Hoops Upto 1.2 Meter In Length And One Extra Hoop For Every Additional Meter. The Bundles Shall Also Be Provided With Skid ( Wooden Packing Under Neath ) To Facili Tate Handling. Mechanical Damange & Corrosion During Transit If Any Shall Be At Th E Cost Of Supplier. [ Warranty Period: 30 Months After The Date Of Delivery ] , Ferritic Steel Coil 2X1250mm., As Per Drawing: Rdso Spec. No. C-K201, Grade X2cr Ni12 ( 409M ) Table 1&2, Heat Treatment Condition 2B As Per Table-5., Packing Instruction: Stain Less Steel Sheets, Coils And Plates:- ( A ) Stainless Steel ( Austenitic & Ferritic Steel ) C Oils. The Coil Shall Be Protected In Reasonably Good Condition To Withstand Norma L Handling Hazard During Transit With The Following Provision As The Barest Minimu M: I ) Coil Should Be Wrapped With A Layer Of Water Proof Paper Through Out Whole L Ength. Ii ) Coil Should Be Wrapped With A Layer Of Biodegradeable Sheet. Iii ) Outer & In Ner Of Coil Should Be Wrapped With Gi Sheet. Iv ) Side Of The Coil Should Be Covered With Card Board Sheet. V ) After This Whole Coil Should Be Wrapped With Biodegrade Able Plastic Sheet Of Suitable Thickness. Vi ) The Inner Edge Of The Coil Should Be Pr Otected By Gi Ring Followed By Another Iron Ring. Vii ) Outer Edge Of The Coil Should Be Wrapped With Gi Ring. Viii ) Coil Should Be Securely Strapped With Minium 5 Steel Ba Nds Through The Eyes Of The Coil And Minium 3 Steel Bands On The Circumference Of The Eye. Ix ) Whole Coil Should Be Mounted On Wooden Blocks For Easy Lifting / Stacki Ng. X ) The Sheets In Coil Form For Thickness 2Mm And Above Shall Have: Inner Dia Of C Oil 450-800Mm Outer Dia Of Coil 1000-1300Mm Weight Of Coil 2.4 - 10 Tonnes Xi ) The Sheets I N Coil Form For Thickness Below 2Mm Shall Have: Inner Dia Of Coil 450-650Mm Outer Di A Of Coil 1000-1300Mm Weight Of Coil 5.0 - 10 Tonnes. ( B ) Stainless Steel ( Austenitic & Fer Ritic Steel Plates / Sheets ) I ) The Sheets / Plates Shall Be Supplied In Bundles Of Optimu M Weight: 2Mt+ / -10% & Each Sheet / Plate Shall Be Seprated With A Layer Of Water Proo F Paper, After This The Whole Bundle Should Be Wrapped With Double Layer Of Water Proof Paper And A Biodegradeable Plastic Sheet Of Suitable Thickness. A Metal Prot Ection In Edges Should Also Be Provided. Ii ) All Bundles Shall Have A Minimum Of 2 Ho Ops Upto 1.2 Meter In Length And One Extra Hoop For Every Additional Meter. The Bu Ndles Shall Also Be Provided With Skid ( Wooden Packing Under Neath ) To Facilitate H Andling. Mechanical Damange & Corrosion During Transit If Any Shall Be At The Cost Of Supplier. , Proction Procedure: Covered In Pi [ Warranty Period: 30 Months After The Date Of Delivery ] , Ferritic Steel Sheet 2X1250x2100mm., As Per Drawing: Rdso Spec. No. C-K201, Gra De X2crni12 ( 409M ) Table 1&2, Heat Treatment Condition 2B As Per Table-5., Packing Instructi On: Stainless Steel Sheets, Coils And Plates:- ( A ) Stainless Steel ( Austenitic & Ferritic Steel ) Coils. The Coil Shall Be Protected In Reasonably Good Condition To Withstand Normal Handling Hazard During Transit With The Following Provision As The Barest Minimum: I ) Coil Should Be Wrapped With A Layer Of Water Proof Paper Through Out Whole Length. Ii ) Coil Should Be Wrapped With A Layer Of Biodegradeable Sheet. Iii ) O Uter & Inner Of Coil Should Be Wrapped With Gi Sheet. Iv ) Side Of The Coil Should Be C Overed With Card Board Sheet. V ) After This Whole Coil Should Be Wrapped With Biod Egradeable Plastic Sheet Of Suitable Thickness. Vi ) The Inner Edge Of The Coil Shoul D Be Protected By Gi Ring Followed By Another Iron Ring. Vii ) Outer Edge Of The Coil Should Be Wrapped With Gi Ring. Viii ) Coil Should Be Securely Strapped With Minium 5 Steel Bands Through The Eyes Of The Coil And Minium 3 Steel Bands On The Circumfer Ence Of The Eye. Ix ) Whole Coil Should Be Mounted On Wooden Blocks For Easy Liftin G / Stacking. X ) The Sheets In Coil Form For Thickness 2Mm And Above Shall Have: Inner Dia Of Coil 450-800Mm Outer Dia Of Coil 1000-1300Mm Weight Of Coil 2.4 - 10 Tonnes Xi ) The Sheets In Coil Form For Thickness Below 2Mm Shall Have: Inner Dia Of Coil 450-650Mm O Uter Dia Of Coil 1000-1300Mm Weight Of Coil 5.0 - 10 Tonnes. ( B ) Stainless Steel ( Austeniti C & Ferritic Steel Plates / Sheets ) I ) The Sheets / Plates Shall Be Supplied In Bundles Of Optimum Weight: 2Mt+ / -10% & Each Sheet / Plate Shall Be Seprated With A Layer Of Wate R Proof Paper, After This The Whole Bundle Should Be Wrapped With Double Layer O F Water Proof Paper And A Biodegradeable Plastic Sheet Of Suitable Thickness. A Me Tal Protection In Edges Should Also Be Provided. Ii ) All Bundles Shall Have A Minimum Of 2 Hoops Upto 1.2 Meter In Length And One Extra Hoop For Every Additional Meter. The Bundles Shall Also Be Provided With Skid ( Wooden Packing Under Neath ) To Facili Tate Handling. Mechanical Damange & Corrosion During Transit If Any Shall Be At Th E Cost Of Supplier. , Proction Procedure: Covered In Pi [ Warranty Period: 30 Months After The Date Of Delivery ] Page 4 Of 9 Run Date / Time: 02 / 05 / 2024 16:53:26Stores / Tkj / Rcf Tender Document , Ferritic Steel Coil 2.5X1250mm., As Per Drawing: Rdso Spec. No. C-K201, Grade X2c Rni12 ( 409M ) Table 1&2, Heat Treatment Condition 2B As Per Table-5., Packing Instruction: Stai Nless Steel Sheets, Coils And Plates:- ( A ) Stainless Steel ( Austenitic & Ferritic Steel ) Coils. The Coil Shall Be Protected In Reasonably Good Condition To Withstand Norm Al Handling Hazard During Transit With The Following Provision As The Barest Minim Um: I ) Coil Should Be Wrapped With A Layer Of Water Proof Paper Through Out Whole Length. Ii ) Coil Should Be Wrapped With A Layer Of Biodegradeable Sheet. Iii ) Outer & I Nner Of Coil Should Be Wrapped With Gi Sheet. Iv ) Side Of The Coil Should Be Covered With Card Board Sheet. V ) After This Whole Coil Should Be Wrapped With Biodegrade Able Plastic Sheet Of Suitable Thickness. Vi ) The Inner Edge Of The Coil Should Be Pr Otected By Gi Ring Followed By Another Iron Ring. Vii ) Outer Edge Of The Coil Should Be Wrapped With Gi Ring. Viii ) Coil Should Be Securely Strapped With Minium 5 Steel Ba Nds Through The Eyes Of The Coil And Minium 3 Steel Bands On The Circumference Of The Eye. Ix ) Whole Coil Should Be Mounted On Wooden Blocks For Easy Lifting / Stacki Ng. X ) The Sheets In Coil Form For Thickness 2Mm And Above Shall Have: Inner Dia Of C Oil 450-800Mm Outer Dia Of Coil 1000-1300Mm Weight Of Coil 2.4 - 10 Tonnes Xi ) The Sheets I N Coil Form For Thickness Below 2Mm Shall Have: Inner Dia Of Coil 450-650Mm Outer Di A Of Coil 1000-1300Mm Weight Of Coil 5.0 - 10 Tonnes. ( B ) Stainless Steel ( Austenitic & Fer Ritic Steel Plates / Sheets ) I ) The Sheets / Plates Shall Be Supplied In Bundles Of Optimu M Weight: 2Mt+ / -10% & Each Sheet / Plate Shall Be Seprated With A Layer Of Water Proo F Paper, After This The Whole Bundle Should Be Wrapped With Double Layer Of Water Proof Paper And A Biodegradeable Plastic Sheet Of Suitable Thickness. A Metal Prot Ection In Edges Should Also Be Provided. Ii ) All Bundles Shall Have A Minimum Of 2 Ho Ops Upto 1.2 Meter In Length And One Extra Hoop For Every Additional Meter. The Bu Ndles Shall Also Be Provided With Skid ( Wooden Packing Under Neath ) To Facilitate H Andling. Mechanical Damange & Corrosion During Transit If Any Shall Be At The Cost Of Supplier. , Proction Procedure: Covered In Pi [ Warranty Period: 30 Months After The Date Of Delivery ]
