Tender For Steel Sheet (Five Sizes), kapurthala-Punjab

Supply Of Steel Sheet Of Size 15X2500x6400mm., As Per Drawing: Din En 10025-5 S355 J2w+N. Sp Ecification For Ultrasonic Testing Of Steel Plates Shall Be Astm-A-578 ( Reapproved 20 01 ) . The Acceptance Standard Shall Be Level B ( Para 8 Of Astm-A-578 ) With Frequency 100% ( All The Plates Shall Be Ut Testing ) , Scanning Shall Be Continuous Over 100% Of P Late Surface., Packing Instruction: Mild / Corten / En Steel Coils, Sheets And Plates:- ( A ) Mil D, En And Corten Steel Sheets In Coil Form. The Coil Shall Be Protected In Reasonabl Y Good Condition To Withstand Normal Handling Hazard During Transit With The Fol Lowing Provision As The Barest Minimum: I ) The Whole Coil Should Be Wrapped With Do Uble Layer Of Water Proof Paper And A Biodegradeable Plastic Sheet Of Suitable Thi Ckness. Ii ) The Inner Edge Of The Coil Should Be Protected By Gi Ring Followed By An Other Iron Ring. Iii ) Outer Edge Of The Coil Should Be Wrapped With Gi Ring. Iv ) Coil Sh Ould Be Securely Strapped With Minium 5 Steel Bands Through The Eyes Of The Coil A Nd Minium 3 Steel Bands On The Circumference Of The Eye. V ) Hot Rolled Coils Shall B E Supplied With Rust Preventive Oil Coating On The Outer Layer, Inner Layer And On T He Both Edges. Vi ) Coils Processed Through Pickling And Or Skin Passing Or Cold Ro Lling Of Thickness Upto 2Mm Shall Be Protected Against Corrosion And Rust By Coat Ing Corrosion Preventive Fluid, Soft Film, Solvent Deposited, Waterdisplacing To Is: 1154 . Vii ) Whole Coil Should Be Mounted On Wooden Blocks For Easy Lifting / Stacking. Viii ) The Sheets In Coil Form For Thickness 2Mm And Above Shall Have: Inner Dia Of Coil 450-800Mm Outer Dia Of Coil 1000-1300Mm Weight Of Coil 2.4 - 10 Tonnes Ix ) The Sheets In C Oil Form For Thickness Below 2Mm Shall Have: Inner Dia Of Coil 450-650Mm Outer Dia Of Coil 1000-1300Mm Weight Of Coil 5.0 - 10 Tonnes. ( B ) Mild, En And Corten Steel Plates / She Ets. I ) Plates Above 5Mm Shall Be Supplied With Reasonable Packing With Metal Strapi Ng For Handling During Transit And Storage. Ii ) The Sheets / Plates Shall Be Supplied I N Bundles With Double Layer Of Water Proof Paper & A Biodegradeable Plastic Shee T Of Suitable Thickness And Metal Protection In Edges.All The Sheets Upto 2Mm Thck Ness Shall Be Protected Against Corrosion And Rust By Coating Corrosion Prevent Ive Fluid, Soft Film, Solvent Deposited, Waterdisplacing To Is: 1154 And All The Sheets / Plates Above 2Mm Shall Be Protected Against Corosion & Rust With Suitable Mineral Oil Or Other Temporary Rust Preventive Coating. Iii ) All Bundles Shall Have A Minimu M Of 2 Hoops Upto 1.2 Meter In Length And One Extra Hoop For Every Additional Mete R. The Bundles Shall Also Be Provided With Skid ( Wooden Packing Under Neath ) To Fa Cilitate Handling. Iv ) Optimum Weight Of The Bundle Should Be 2Mt+-10%. Mechanical D Amange & Corrosion During Transit If Any Shall Be At The Cost Of Supplier. [ Warranty Period: 30 Months After The Date Of Delivery ] , Steel Sheet Of Size 8X2500x4500mm., As Per Drawing: Din En 10025-5 S355j2w+N.Spe Cification For Ultrasonic Testing Of Steel Plates Shall Be Astm-A-578 ( Reapproved 200 1 ) . The Acceptance Standard Shall Be Level B ( Para 8 Of Astm-A-578 ) With Frequency 1 00% ( All The Plates Shall Be Ut Testing ) , Scnanning Shall Be Continuous Over 100% Of Plate Surface., Packing Instruction: Mild / Corten / En Steel Coils, Sheets And Plates:- ( A ) Mi Ld, En And Corten Steel Sheets In Coil Form. The Coil Shall Be Protected In Reasonab Ly Good Condition To Withstand Normal Handling Hazard During Transit With The Fo Llowing Provision As The Barest Minimum: I ) The Whole Coil Should Be Wrapped With D Ouble Layer Of Water Proof Paper And A Biodegradeable Plastic Sheet Of Suitable T Hickness. Ii ) The Inner Edge Of The Coil Should Be Protected By Gi Ring Followed By A Nother Iron Ring. Iii ) Outer Edge Of The Coil Should Be Wrapped With Gi Ring. Iv ) Coil S Hould Be Securely Strapped With Minium 5 Steel Bands Through The Eyes Of The Coil And Minium 3 Steel Bands On The Circumference Of The Eye. V ) Hot Rolled Coils Shall Be Supplied With Rust Preventive Oil Coating On The Outer Layer, Inner Layer And On The Both Edges. Vi ) Coils Processed Through Pickling And Or Skin Passing Or Cold R Olling Of Thickness Upto 2Mm Shall Be Protected Against Corrosion And Rust By Co Ating Corrosion Preventive Fluid, Soft Film, Solvent Deposited, Waterdisplacing To I S: 1154 . Vii ) Whole Coil Should Be Mounted On Wooden Blocks For Easy Lifting / Stacki Ng. Viii ) The Sheets In Coil Form For Thickness 2Mm And Above Shall Have: Inner Dia Of Coil 450-800Mm Outer Dia Of Coil 1000-1300Mm Weight Of Coil 2.4 - 10 Tonnes Ix ) The Sheet S In Coil Form For Thickness Below 2Mm Shall Have: Inner Dia Of Coil 450-650Mm Outer Dia Of Coil 1000-1300Mm Weight Of Coil 5.0 - 10 Tonnes. ( B ) Mild, En And Corten Steel Plat Es / Sheets. I ) Plates Above 5Mm Shall Be Supplied With Reasonable Packing With Metal Straping For Handling During Transit And Storage. Ii ) The Sheets / Plates Shall Be Sup Plied In Bundles With Double Layer Of Water Proof Paper & A Biodegradeable Plastic Sheet Of Suitable Thickness And Metal Protection In Edges.All The Sheets Upto 2Mm Thckness Shall Be Protected Against Corrosion And Rust By Coating Corrosion Pre Ventive Fluid, Soft Film, Solvent Deposited, Waterdisplacing To Is: 1154 And All The Sh Eets / Plates Above 2Mm Shall Be Protected Against Corosion & Rust With Suitable Min Eral Oil Or Other Temporary Rust Preventive Coating. Iii ) All Bundles Shall Have A Mi Nimum Of 2 Hoops Upto 1.2 Meter In Length And One Extra Hoop For Every Additional Meter. The Bundles Shall Also Be Provided With Skid ( Wooden Packing Under Neath ) T O Facilitate Handling. Iv ) Optimum Weight Of The Bundle Should Be 2Mt+-10%. Mechanic Al Damange & Corrosion During Transit If Any Shall Be At The Cost Of Supplier. [ Warr Anty Period: 30 Months After The Date Of Delivery ] , Steel Sheet Of Size 10X2500x6800mm., As Per Drawing: Din En 10025-5 S355 J2w+N. Sp Ecification For Ultrasonic Testing Of Steel Plates Shall Be Astm-A-578 ( Reapproved 20 01 ) . The Acceptance Standard Shall Be Level B ( Para 8 Of Astm-A-578 ) With Frequency 100% ( All The Plates Shall Be Ut Testing ) , Scanning Shall Be Continuous Over 100% Of P Alte Surface., Packing Instruction: Mild / Corten / En Steel Coils, Sheets And Plates:- ( A ) Mil D, En And Corten Steel Sheets In Coil Form. The Coil Shall Be Protected In Reasonabl Y Good Condition To Withstand Normal Handling Hazard During Transit With The Fol Lowing Provision As The Barest Minimum: I ) The Whole Coil Should Be Wrapped With Do Uble Layer Of Water Proof Paper And A Biodegradeable Plastic Sheet Of Suitable Thi Ckness. Ii ) The Inner Edge Of The Coil Should Be Protected By Gi Ring Followed By An Other Iron Ring. Iii ) Outer Edge Of The Coil Should Be Wrapped With Gi Ring. Iv ) Coil Sh Ould Be Securely Strapped With Minium 5 Steel Bands Through The Eyes Of The Coil A Nd Minium 3 Steel Bands On The Circumference Of The Eye. V ) Hot Rolled Coils Shall B E Supplied With Rust Preventive Oil Coating On The Outer Layer, Inner Layer And On T He Both Edges. Vi ) Coils Processed Through Pickling And Or Skin Passing Or Cold Ro Lling Of Thickness Upto 2Mm Shall Be Protected Against Corrosion And Rust By Coat Ing Corrosion Preventive Fluid, Soft Film, Solvent Deposited, Waterdisplacing To Is: 1154 . Vii ) Whole Coil Should Be Mounted On Wooden Blocks For Easy Lifting / Stacking. Viii ) The Sheets In Coil Form For Thickness 2Mm And Above Shall Have: Inner Dia Of Coil 450-800Mm Outer Dia Of Coil 1000-1300Mm Weight Of Coil 2.4 - 10 Tonnes Ix ) The Sheets In C Oil Form For Thickness Below 2Mm Shall Have: Inner Dia Of Coil 450-650Mm Outer Dia Of Coil 1000-1300Mm Weight Of Coil 5.0 - 10 Tonnes. ( B ) Mild, En And Corten Steel Plates / She Ets. I ) Plates Above 5Mm Shall Be Supplied With Reasonable Packing With Metal Strapi Ng For Handling During Transit And Storage. Ii ) The Sheets / Plates Shall Be Supplied I N Bundles With Double Layer Of Water Proof Paper & A Biodegradeable Plastic Shee T Of Suitable Thickness And Metal Protection In Edges.All The Sheets Upto 2Mm Thck Ness Shall Be Protected Against Corrosion And Rust By Coating Corrosion Prevent Ive Fluid, Soft Film, Solvent Deposited, Waterdisplacing To Is: 1154 And All The Sheets / Plates Above 2Mm Shall Be Protected Against Corosion & Rust With Suitable Mineral Oil Or Other Temporary Rust Preventive Coating. Iii ) All Bundles Shall Have A Minimu M Of 2 Hoops Upto 1.2 Meter In Length And One Extra Hoop For Every Additional Mete R. The Bundles Shall Also Be Provided With Skid ( Wooden Packing Under Neath ) To Fa Cilitate Handling. Iv ) Optimum Weight Of The Bundle Should Be 2Mt+-10%. Mechanical D Amange & Corrosion During Transit If Any Shall Be At The Cost Of Supplier. [ Warranty Period: 30 Months After The Date Of Delivery ] , Steel Sheet Of Size 12X2500x6300mm., As Per Drawing: Din En 10025-5 S355 J2w+N. Sp Ecification For Ultrasonic Testing Of Steel Plates Shall Be Astm-A-578 ( Reapproved 20 01 ) . The Acceptance Standard Shall Be Level B ( Para 8 Of Astm-A-578 ) With Frequency 100% ( All The Plates Shall Be Ut Testing ) , Scanning Shall Be Continuous Over 100% Of P Late Surface., Packing Instruction: Mild / Corten / En Steel Coils, Sheets And Plates:- ( A ) Mil D, En And Corten Steel Sheets In Coil Form. The Coil Shall Be Protected In Reasonabl Y Good Condition To Withstand Normal Handling Hazard During Transit With The Fol Lowing Provision As The Barest Minimum: I ) The Whole Coil Should Be Wrapped With Do Uble Layer Of Water Proof Paper And A Biodegradeable Plastic Sheet Of Suitable Thi Ckness. Ii ) The Inner Edge Of The Coil Should Be Protected By Gi Ring Followed By An Other Iron Ring. Iii ) Outer Edge Of The Coil Should Be Wrapped With Gi Ring. Iv ) Coil Sh Ould Be Securely Strapped With Minium 5 Steel Bands Through The Eyes Of The Coil A Nd Minium 3 Steel Bands On The Circumference Of The Eye. V ) Hot Rolled Coils Shall B E Supplied With Rust Preventive Oil Coating On The Outer Layer, Inner Layer And On T He Both Edges. Vi ) Coils Processed Through Pickling And Or Skin Passing Or Cold Ro Lling Of Thickness Upto 2Mm Shall Be Protected Against Corrosion And Rust By Coat Ing Corrosion Preventive Fluid, Soft Film, Solvent Deposited, Waterdisplacing To Is: 1154 . Vii ) Whole Coil Should Be Mounted On Wooden Blocks For Easy Lifting / Stacking. Viii ) The Sheets In Coil Form For Thickness 2Mm And Above Shall Have: Inner Dia Of Coil 450-800Mm Outer Dia Of Coil 1000-1300Mm Weight Of Coil 2.4 - 10 Tonnes Ix ) The Sheets In C Oil Form For Thickness Below 2Mm Shall Have: Inner Dia Of Coil 450-650Mm Outer Dia Of Coil 1000-1300Mm Weight Of Coil 5.0 - 10 Tonnes. ( B ) Mild, En And Corten Steel Plates / She Ets. I ) Plates Above 5Mm Shall Be Supplied With Reasonable Packing With Metal Strapi Ng For Handling During Transit And Storage. Ii ) The Sheets / Plates Shall Be Supplied I N Bundles With Double Layer Of Water Proof Paper & A Biodegradeable Plastic Shee T Of Suitable Thickness And Metal Protection In Edges.All The Sheets Upto 2Mm Thck Ness Shall Be Protected Against Corrosion And Rust By Coating Corrosion Prevent Ive Fluid, Soft Film, Solvent Deposited, Waterdisplacing To Is: 1154 And All The Sheets / Plates Above 2Mm Shall Be Protected Against Corosion & Rust With Suitable Mineral Oil Or Other Temporary Rust Preventive Coating. Iii ) All Bundles Shall Have A Minimu M Of 2 Hoops Upto 1.2 Meter In Length And One Extra Hoop For Every Additional Mete R. The Bundles Shall Also Be Provided With Skid ( Wooden Packing Under Neath ) To Fa Cilitate Handling. Iv ) Optimum Weight Of The Bundle Should Be 2Mt+-10%. Mechanical D Amange & Corrosion During Transit If Any Shall Be At The Cost Of Supplier. [ Warranty Period: 30 Months After The Date Of Delivery ] , Steel Sheet Of Size 20X2500x6400mm., As Per Drawing: Din En 10025-5 S355 J2w+N. Sp Eciifcation For Ultrasonic Testing Of Steel Plates Shall Be Astm-A-578 ( Reapproved 20 01 ) With Frequency 100% ( All The Plates Shall Be Ut Testing ) , Scnanning Shall Be Conti Nuous Over 100% Of Plate Surface., Packing Instruction: Mild / Corten / En Steel Coils, Shee Ts And Plates:- ( A ) Mild, En And Corten Steel Sheets In Coil Form. The Coil Shall Be Pro Tected In Reasonably Good Condition To Withstand Normal Handling Hazard During Transit With The Following Provision As The Barest Minimum: I ) The Whole Coil Should Be Wrapped With Double Layer Of Water Proof Paper And A Biodegradeable Plastic S Heet Of Suitable Thickness. Ii ) The Inner Edge Of The Coil Should Be Protected By Gi Ri Ng Followed By Another Iron Ring. Iii ) Outer Edge Of The Coil Should Be Wrapped Wit H Gi Ring. Iv ) Coil Should Be Securely Strapped With Minium 5 Steel Bands Through Th E Eyes Of The Coil And Minium 3 Steel Bands On The Circumference Of The Eye. V ) Hot R Olled Coils Shall Be Supplied With Rust Preventive Oil Coating On The Outer Layer, In Ner Layer And On The Both Edges. Vi ) Coils Processed Through Pickling And Or Skin P Assing Or Cold Rolling Of Thickness Upto 2Mm Shall Be Protected Against Corrosio N And Rust By Coating Corrosion Preventive Fluid, Soft Film, Solvent Deposited, Wat Erdisplacing To Is: 1154 . Vii ) Whole Coil Should Be Mounted On Wooden Blocks For Ea Sy Lifting / Stacking. Viii ) The Sheets In Coil Form For Thickness 2Mm And Above Shall H Ave: Inner Dia Of Coil 450-800Mm Outer Dia Of Coil 1000-1300Mm Weight Of Coil 2.4 - 10 Ton Nes Ix ) The Sheets In Coil Form For Thickness Below 2Mm Shall Have: Inner Dia Of Coil 450-650Mm Outer Dia Of Coil 1000-1300Mm Weight Of Coil 5.0 - 10 Tonnes. ( B ) Mild, En And C Orten Steel Plates / Sheets. I ) Plates Above 5Mm Shall Be Supplied With Reasonable Pa Cking With Metal Straping For Handling During Transit And Storage. Ii ) The Sheets / Pl Ates Shall Be Supplied In Bundles With Double Layer Of Water Proof Paper & A Biode Gradeable Plastic Sheet Of Suitable Thickness And Metal Protection In Edges.All Th E Sheets Upto 2Mm Thckness Shall Be Protected Against Corrosion And Rust By Coa Ting Corrosion Preventive Fluid, Soft Film, Solvent Deposited, Waterdisplacing To Is : 1154 And All The Sheets / Plates Above 2Mm Shall Be Protected Against Corosion & Ru St With Suitable Mineral Oil Or Other Temporary Rust Preventive Coating. Iii ) All Bun Dles Shall Have A Minimum Of 2 Hoops Upto 1.2 Meter In Length And One Extra Hoop Fo R Every Additional Meter. The Bundles Shall Also Be Provided With Skid ( Wooden Pac King Under Neath ) To Facilitate Handling. Iv ) Optimum Weight Of The Bundle Should Be 2Mt+-10%. Mechanical Damange & Corrosion During Transit If Any Shall Be At The Cos T Of Supplier. [ Warranty Period: 30 Months After The Date Of Delivery ]

Refer document

INR 2000000.0 /-

Refer document

FileName	File Description	File Size
8194c2aa-a9ea-4a13-8870-08e3f4214fbe.pdf	Tender Notice	0 KB

Sl. No.	Item Description
1	Steel Sheet (Five Sizes)
2	STEEL SHEET OF SIZE 15X2500X6400MM., as per Drawing: DIN EN 10025-5 S355 J2W+N. SP ECIFICATION FOR ULTRASONIC TESTING OF STEEL PLATES SHALL BE ASTM-A-578(REAPPROVED 20 01). THE ACCEPTANCE STANDARD SHALL BE "LEVEL B" (PARA 8 OF ASTM-A-578) WITH FREQUENCY 100% (ALL THE PLATES SHALL BE UT TESTING),SCANNING SHALL BE CONTINUOUS OVER 100% OF P LATE SURFACE., Packing Instruction: MILD / CORTEN/ EN STEEL COILS, SHEETS AND PLATES:- (A) MIL D, EN AND CORTEN STEEL SHEETS IN COIL FORM. THE COIL SHALL BE PROTECTED IN REASONABL Y GOOD CONDITION TO WITHSTAND NORMAL HANDLING HAZARD DURING TRANSIT WITH THE FOL LOWING PROVISION AS THE BAREST MINIMUM: I) THE WHOLE COIL SHOULD BE WRAPPED WITH DO UBLE LAYER OF WATER PROOF PAPER AND A BIODEGRADEABLE PLASTIC SHEET OF SUITABLE THI CKNESS. II) THE INNER EDGE OF THE COIL SHOULD BE PROTECTED BY GI RING FOLLOWED BY AN OTHER IRON RING. III) OUTER EDGE OF THE COIL SHOULD BE WRAPPED WITH GI RING. IV) COIL SH OULD BE SECURELY STRAPPED WITH MINIUM 5 STEEL BANDS THROUGH THE EYES OF THE COIL A ND MINIUM 3 STEEL BANDS ON THE CIRCUMFERENCE OF THE EYE. V) HOT ROLLED COILS SHALL B E SUPPLIED WITH RUST PREVENTIVE OIL COATING ON THE OUTER LAYER, INNER LAYER AND ON T HE BOTH EDGES. VI) COILS PROCESSED THROUGH PICKLING AND OR SKIN PASSING OR COLD RO LLING OF THICKNESS UPTO 2MM SHALL BE PROTECTED AGAINST CORROSION AND RUST BY COAT ING CORROSION PREVENTIVE FLUID, SOFT FILM, SOLVENT DEPOSITED, WATERDISPLACING TO IS: 1154 . VII) WHOLE COIL SHOULD BE MOUNTED ON WOODEN BLOCKS FOR EASY LIFTING/ STACKING. VIII) THE SHEETS IN COIL FORM FOR THICKNESS 2MM AND ABOVE SHALL HAVE: INNER DIA OF COIL 450-800MM OUTER DIA OF COIL 1000-1300MM WEIGHT OF COIL 2.4 - 10 TONNES IX) THE SHEETS IN C OIL FORM FOR THICKNESS BELOW 2MM SHALL HAVE: INNER DIA OF COIL 450-650MM OUTER DIA OF COIL 1000-1300MM WEIGHT OF COIL 5.0 - 10 TONNES. (B) MILD, EN AND CORTEN STEEL PLATES/SHE ETS. I) PLATES ABOVE 5MM SHALL BE SUPPLIED WITH REASONABLE PACKING WITH METAL STRAPI NG FOR HANDLING DURING TRANSIT AND STORAGE. II) THE SHEETS/PLATES SHALL BE SUPPLIED I N BUNDLES WITH DOUBLE LAYER OF WATER PROOF PAPER & A BIODEGRADEABLE PLASTIC SHEE T OF SUITABLE THICKNESS AND METAL PROTECTION IN EDGES.ALL THE SHEETS UPTO 2MM THCK NESS SHALL BE PROTECTED AGAINST CORROSION AND RUST BY COATING CORROSION PREVENT IVE FLUID, SOFT FILM, SOLVENT DEPOSITED, WATERDISPLACING TO IS: 1154 AND ALL THE SHEETS/ PLATES ABOVE 2MM SHALL BE PROTECTED AGAINST COROSION & RUST WITH SUITABLE MINERAL OIL OR OTHER TEMPORARY RUST PREVENTIVE COATING. III) ALL BUNDLES SHALL HAVE A MINIMU M OF 2 HOOPS UPTO 1.2 METER IN LENGTH AND ONE EXTRA HOOP FOR EVERY ADDITIONAL METE R. THE BUNDLES SHALL ALSO BE PROVIDED WITH SKID (WOODEN PACKING UNDER NEATH) TO FA CILITATE HANDLING. IV) OPTIMUM WEIGHT OF THE BUNDLE SHOULD BE 2MT+-10%. MECHANICAL D AMANGE & CORROSION DURING TRANSIT IF ANY SHALL BE AT THE COST OF SUPPLIER. [ Warranty Period: 30 Months after the date of delivery ]
3	STEEL SHEET OF SIZE 8X2500X4500MM., as per Drawing: DIN EN 10025-5 S355J2W+N.SPE CIFICATION FOR ULTRASONIC TESTING OF STEEL PLATES SHALL BE ASTM-A-578(REAPPROVED 200 1). THE ACCEPTANCE STANDARD SHALL BE "LEVEL B" (PARA 8 OF ASTM-A-578) WITH FREQUENCY 1 00% (ALL THE PLATES SHALL BE UT TESTING),SCNANNING SHALL BE CONTINUOUS OVER 100% OF PLATE SURFACE., Packing Instruction: MILD / CORTEN/ EN STEEL COILS, SHEETS AND PLATES:- (A) MI LD, EN AND CORTEN STEEL SHEETS IN COIL FORM. THE COIL SHALL BE PROTECTED IN REASONAB LY GOOD CONDITION TO WITHSTAND NORMAL HANDLING HAZARD DURING TRANSIT WITH THE FO LLOWING PROVISION AS THE BAREST MINIMUM: I) THE WHOLE COIL SHOULD BE WRAPPED WITH D OUBLE LAYER OF WATER PROOF PAPER AND A BIODEGRADEABLE PLASTIC SHEET OF SUITABLE T HICKNESS. II) THE INNER EDGE OF THE COIL SHOULD BE PROTECTED BY GI RING FOLLOWED BY A NOTHER IRON RING. III) OUTER EDGE OF THE COIL SHOULD BE WRAPPED WITH GI RING. IV) COIL S HOULD BE SECURELY STRAPPED WITH MINIUM 5 STEEL BANDS THROUGH THE EYES OF THE COIL AND MINIUM 3 STEEL BANDS ON THE CIRCUMFERENCE OF THE EYE. V) HOT ROLLED COILS SHALL BE SUPPLIED WITH RUST PREVENTIVE OIL COATING ON THE OUTER LAYER, INNER LAYER AND ON THE BOTH EDGES. VI) COILS PROCESSED THROUGH PICKLING AND OR SKIN PASSING OR COLD R OLLING OF THICKNESS UPTO 2MM SHALL BE PROTECTED AGAINST CORROSION AND RUST BY CO ATING CORROSION PREVENTIVE FLUID, SOFT FILM, SOLVENT DEPOSITED, WATERDISPLACING TO I S: 1154 . VII) WHOLE COIL SHOULD BE MOUNTED ON WOODEN BLOCKS FOR EASY LIFTING/ STACKI NG. VIII) THE SHEETS IN COIL FORM FOR THICKNESS 2MM AND ABOVE SHALL HAVE: INNER DIA OF COIL 450-800MM OUTER DIA OF COIL 1000-1300MM WEIGHT OF COIL 2.4 - 10 TONNES IX) THE SHEET S IN COIL FORM FOR THICKNESS BELOW 2MM SHALL HAVE: INNER DIA OF COIL 450-650MM OUTER DIA OF COIL 1000-1300MM WEIGHT OF COIL 5.0 - 10 TONNES. (B) MILD, EN AND CORTEN STEEL PLAT ES/SHEETS. I) PLATES ABOVE 5MM SHALL BE SUPPLIED WITH REASONABLE PACKING WITH METAL STRAPING FOR HANDLING DURING TRANSIT AND STORAGE. II) THE SHEETS/PLATES SHALL BE SUP PLIED IN BUNDLES WITH DOUBLE LAYER OF WATER PROOF PAPER & A BIODEGRADEABLE PLASTIC SHEET OF SUITABLE THICKNESS AND METAL PROTECTION IN EDGES.ALL THE SHEETS UPTO 2MM THCKNESS SHALL BE PROTECTED AGAINST CORROSION AND RUST BY COATING CORROSION PRE VENTIVE FLUID, SOFT FILM, SOLVENT DEPOSITED, WATERDISPLACING TO IS: 1154 AND ALL THE SH EETS/PLATES ABOVE 2MM SHALL BE PROTECTED AGAINST COROSION & RUST WITH SUITABLE MIN ERAL OIL OR OTHER TEMPORARY RUST PREVENTIVE COATING. III) ALL BUNDLES SHALL HAVE A MI NIMUM OF 2 HOOPS UPTO 1.2 METER IN LENGTH AND ONE EXTRA HOOP FOR EVERY ADDITIONAL METER. THE BUNDLES SHALL ALSO BE PROVIDED WITH SKID (WOODEN PACKING UNDER NEATH) T O FACILITATE HANDLING. IV) OPTIMUM WEIGHT OF THE BUNDLE SHOULD BE 2MT+-10%. MECHANIC AL DAMANGE & CORROSION DURING TRANSIT IF ANY SHALL BE AT THE COST OF SUPPLIER. [ Warr anty Period: 30 Months after the date of delivery ]
4	STEEL SHEET OF SIZE 10X2500X6800MM., as per Drawing: DIN EN 10025-5 S355 J2W+N. SP ECIFICATION FOR ULTRASONIC TESTING OF STEEL PLATES SHALL BE ASTM-A-578(REAPPROVED 20 01). THE ACCEPTANCE STANDARD SHALL BE "LEVEL B" (PARA 8 OF ASTM-A-578) WITH FREQUENCY 100% (ALL THE PLATES SHALL BE UT TESTING),SCANNING SHALL BE CONTINUOUS OVER 100% OF P ALTE SURFACE., Packing Instruction: MILD / CORTEN/ EN STEEL COILS, SHEETS AND PLATES:- (A) MIL D, EN AND CORTEN STEEL SHEETS IN COIL FORM. THE COIL SHALL BE PROTECTED IN REASONABL Y GOOD CONDITION TO WITHSTAND NORMAL HANDLING HAZARD DURING TRANSIT WITH THE FOL LOWING PROVISION AS THE BAREST MINIMUM: I) THE WHOLE COIL SHOULD BE WRAPPED WITH DO UBLE LAYER OF WATER PROOF PAPER AND A BIODEGRADEABLE PLASTIC SHEET OF SUITABLE THI CKNESS. II) THE INNER EDGE OF THE COIL SHOULD BE PROTECTED BY GI RING FOLLOWED BY AN OTHER IRON RING. III) OUTER EDGE OF THE COIL SHOULD BE WRAPPED WITH GI RING. IV) COIL SH OULD BE SECURELY STRAPPED WITH MINIUM 5 STEEL BANDS THROUGH THE EYES OF THE COIL A ND MINIUM 3 STEEL BANDS ON THE CIRCUMFERENCE OF THE EYE. V) HOT ROLLED COILS SHALL B E SUPPLIED WITH RUST PREVENTIVE OIL COATING ON THE OUTER LAYER, INNER LAYER AND ON T HE BOTH EDGES. VI) COILS PROCESSED THROUGH PICKLING AND OR SKIN PASSING OR COLD RO LLING OF THICKNESS UPTO 2MM SHALL BE PROTECTED AGAINST CORROSION AND RUST BY COAT ING CORROSION PREVENTIVE FLUID, SOFT FILM, SOLVENT DEPOSITED, WATERDISPLACING TO IS: 1154 . VII) WHOLE COIL SHOULD BE MOUNTED ON WOODEN BLOCKS FOR EASY LIFTING/ STACKING. VIII) THE SHEETS IN COIL FORM FOR THICKNESS 2MM AND ABOVE SHALL HAVE: INNER DIA OF COIL 450-800MM OUTER DIA OF COIL 1000-1300MM WEIGHT OF COIL 2.4 - 10 TONNES IX) THE SHEETS IN C OIL FORM FOR THICKNESS BELOW 2MM SHALL HAVE: INNER DIA OF COIL 450-650MM OUTER DIA OF COIL 1000-1300MM WEIGHT OF COIL 5.0 - 10 TONNES. (B) MILD, EN AND CORTEN STEEL PLATES/SHE ETS. I) PLATES ABOVE 5MM SHALL BE SUPPLIED WITH REASONABLE PACKING WITH METAL STRAPI NG FOR HANDLING DURING TRANSIT AND STORAGE. II) THE SHEETS/PLATES SHALL BE SUPPLIED I N BUNDLES WITH DOUBLE LAYER OF WATER PROOF PAPER & A BIODEGRADEABLE PLASTIC SHEE T OF SUITABLE THICKNESS AND METAL PROTECTION IN EDGES.ALL THE SHEETS UPTO 2MM THCK NESS SHALL BE PROTECTED AGAINST CORROSION AND RUST BY COATING CORROSION PREVENT IVE FLUID, SOFT FILM, SOLVENT DEPOSITED, WATERDISPLACING TO IS: 1154 AND ALL THE SHEETS/ PLATES ABOVE 2MM SHALL BE PROTECTED AGAINST COROSION & RUST WITH SUITABLE MINERAL OIL OR OTHER TEMPORARY RUST PREVENTIVE COATING. III) ALL BUNDLES SHALL HAVE A MINIMU M OF 2 HOOPS UPTO 1.2 METER IN LENGTH AND ONE EXTRA HOOP FOR EVERY ADDITIONAL METE R. THE BUNDLES SHALL ALSO BE PROVIDED WITH SKID (WOODEN PACKING UNDER NEATH) TO FA CILITATE HANDLING. IV) OPTIMUM WEIGHT OF THE BUNDLE SHOULD BE 2MT+-10%. MECHANICAL D AMANGE & CORROSION DURING TRANSIT IF ANY SHALL BE AT THE COST OF SUPPLIER. [ Warranty Period: 30 Months after the date of delivery ]
5	STEEL SHEET OF SIZE 12X2500X6300MM., as per Drawing: DIN EN 10025-5 S355 J2W+N. SP ECIFICATION FOR ULTRASONIC TESTING OF STEEL PLATES SHALL BE ASTM-A-578(REAPPROVED 20 01). THE ACCEPTANCE STANDARD SHALL BE "LEVEL B" (PARA 8 OF ASTM-A-578) WITH FREQUENCY 100% (ALL THE PLATES SHALL BE UT TESTING),SCANNING SHALL BE CONTINUOUS OVER 100% OF P LATE SURFACE., Packing Instruction: MILD / CORTEN/ EN STEEL COILS, SHEETS AND PLATES:- (A) MIL D, EN AND CORTEN STEEL SHEETS IN COIL FORM. THE COIL SHALL BE PROTECTED IN REASONABL Y GOOD CONDITION TO WITHSTAND NORMAL HANDLING HAZARD DURING TRANSIT WITH THE FOL LOWING PROVISION AS THE BAREST MINIMUM: I) THE WHOLE COIL SHOULD BE WRAPPED WITH DO UBLE LAYER OF WATER PROOF PAPER AND A BIODEGRADEABLE PLASTIC SHEET OF SUITABLE THI CKNESS. II) THE INNER EDGE OF THE COIL SHOULD BE PROTECTED BY GI RING FOLLOWED BY AN OTHER IRON RING. III) OUTER EDGE OF THE COIL SHOULD BE WRAPPED WITH GI RING. IV) COIL SH OULD BE SECURELY STRAPPED WITH MINIUM 5 STEEL BANDS THROUGH THE EYES OF THE COIL A ND MINIUM 3 STEEL BANDS ON THE CIRCUMFERENCE OF THE EYE. V) HOT ROLLED COILS SHALL B E SUPPLIED WITH RUST PREVENTIVE OIL COATING ON THE OUTER LAYER, INNER LAYER AND ON T HE BOTH EDGES. VI) COILS PROCESSED THROUGH PICKLING AND OR SKIN PASSING OR COLD RO LLING OF THICKNESS UPTO 2MM SHALL BE PROTECTED AGAINST CORROSION AND RUST BY COAT ING CORROSION PREVENTIVE FLUID, SOFT FILM, SOLVENT DEPOSITED, WATERDISPLACING TO IS: 1154 . VII) WHOLE COIL SHOULD BE MOUNTED ON WOODEN BLOCKS FOR EASY LIFTING/ STACKING. VIII) THE SHEETS IN COIL FORM FOR THICKNESS 2MM AND ABOVE SHALL HAVE: INNER DIA OF COIL 450-800MM OUTER DIA OF COIL 1000-1300MM WEIGHT OF COIL 2.4 - 10 TONNES IX) THE SHEETS IN C OIL FORM FOR THICKNESS BELOW 2MM SHALL HAVE: INNER DIA OF COIL 450-650MM OUTER DIA OF COIL 1000-1300MM WEIGHT OF COIL 5.0 - 10 TONNES. (B) MILD, EN AND CORTEN STEEL PLATES/SHE ETS. I) PLATES ABOVE 5MM SHALL BE SUPPLIED WITH REASONABLE PACKING WITH METAL STRAPI NG FOR HANDLING DURING TRANSIT AND STORAGE. II) THE SHEETS/PLATES SHALL BE SUPPLIED I N BUNDLES WITH DOUBLE LAYER OF WATER PROOF PAPER & A BIODEGRADEABLE PLASTIC SHEE T OF SUITABLE THICKNESS AND METAL PROTECTION IN EDGES.ALL THE SHEETS UPTO 2MM THCK NESS SHALL BE PROTECTED AGAINST CORROSION AND RUST BY COATING CORROSION PREVENT IVE FLUID, SOFT FILM, SOLVENT DEPOSITED, WATERDISPLACING TO IS: 1154 AND ALL THE SHEETS/ PLATES ABOVE 2MM SHALL BE PROTECTED AGAINST COROSION & RUST WITH SUITABLE MINERAL OIL OR OTHER TEMPORARY RUST PREVENTIVE COATING. III) ALL BUNDLES SHALL HAVE A MINIMU M OF 2 HOOPS UPTO 1.2 METER IN LENGTH AND ONE EXTRA HOOP FOR EVERY ADDITIONAL METE R. THE BUNDLES SHALL ALSO BE PROVIDED WITH SKID (WOODEN PACKING UNDER NEATH) TO FA CILITATE HANDLING. IV) OPTIMUM WEIGHT OF THE BUNDLE SHOULD BE 2MT+-10%. MECHANICAL D AMANGE & CORROSION DURING TRANSIT IF ANY SHALL BE AT THE COST OF SUPPLIER. [ Warranty Period: 30 Months after the date of delivery ]
6	STEEL SHEET OF SIZE 20X2500X6400MM., as per Drawing: DIN EN 10025-5 S355 J2W+N. SP ECIIFCATION FOR ULTRASONIC TESTING OF STEEL PLATES SHALL BE ASTM-A-578(REAPPROVED 20 01) WITH FREQUENCY 100% (ALL THE PLATES SHALL BE UT TESTING),SCNANNING SHALL BE CONTI NUOUS OVER 100% OF PLATE SURFACE., Packing Instruction: MILD / CORTEN/ EN STEEL COILS, SHEE TS AND PLATES:- (A) MILD, EN AND CORTEN STEEL SHEETS IN COIL FORM. THE COIL SHALL BE PRO TECTED IN REASONABLY GOOD CONDITION TO WITHSTAND NORMAL HANDLING HAZARD DURING TRANSIT WITH THE FOLLOWING PROVISION AS THE BAREST MINIMUM: I) THE WHOLE COIL SHOULD BE WRAPPED WITH DOUBLE LAYER OF WATER PROOF PAPER AND A BIODEGRADEABLE PLASTIC S HEET OF SUITABLE THICKNESS. II) THE INNER EDGE OF THE COIL SHOULD BE PROTECTED BY GI RI NG FOLLOWED BY ANOTHER IRON RING. III) OUTER EDGE OF THE COIL SHOULD BE WRAPPED WIT H GI RING. IV) COIL SHOULD BE SECURELY STRAPPED WITH MINIUM 5 STEEL BANDS THROUGH TH E EYES OF THE COIL AND MINIUM 3 STEEL BANDS ON THE CIRCUMFERENCE OF THE EYE. V) HOT R OLLED COILS SHALL BE SUPPLIED WITH RUST PREVENTIVE OIL COATING ON THE OUTER LAYER, IN NER LAYER AND ON THE BOTH EDGES. VI) COILS PROCESSED THROUGH PICKLING AND OR SKIN P ASSING OR COLD ROLLING OF THICKNESS UPTO 2MM SHALL BE PROTECTED AGAINST CORROSIO N AND RUST BY COATING CORROSION PREVENTIVE FLUID, SOFT FILM, SOLVENT DEPOSITED, WAT ERDISPLACING TO IS: 1154 . VII) WHOLE COIL SHOULD BE MOUNTED ON WOODEN BLOCKS FOR EA SY LIFTING/ STACKING. VIII) THE SHEETS IN COIL FORM FOR THICKNESS 2MM AND ABOVE SHALL H AVE: INNER DIA OF COIL 450-800MM OUTER DIA OF COIL 1000-1300MM WEIGHT OF COIL 2.4 - 10 TON NES IX) THE SHEETS IN COIL FORM FOR THICKNESS BELOW 2MM SHALL HAVE: INNER DIA OF COIL 450-650MM OUTER DIA OF COIL 1000-1300MM WEIGHT OF COIL 5.0 - 10 TONNES. (B) MILD, EN AND C ORTEN STEEL PLATES/SHEETS. I) PLATES ABOVE 5MM SHALL BE SUPPLIED WITH REASONABLE PA CKING WITH METAL STRAPING FOR HANDLING DURING TRANSIT AND STORAGE. II) THE SHEETS/PL ATES SHALL BE SUPPLIED IN BUNDLES WITH DOUBLE LAYER OF WATER PROOF PAPER & A BIODE GRADEABLE PLASTIC SHEET OF SUITABLE THICKNESS AND METAL PROTECTION IN EDGES.ALL TH E SHEETS UPTO 2MM THCKNESS SHALL BE PROTECTED AGAINST CORROSION AND RUST BY COA TING CORROSION PREVENTIVE FLUID, SOFT FILM, SOLVENT DEPOSITED, WATERDISPLACING TO IS : 1154 AND ALL THE SHEETS/PLATES ABOVE 2MM SHALL BE PROTECTED AGAINST COROSION & RU ST WITH SUITABLE MINERAL OIL OR OTHER TEMPORARY RUST PREVENTIVE COATING. III) ALL BUN DLES SHALL HAVE A MINIMUM OF 2 HOOPS UPTO 1.2 METER IN LENGTH AND ONE EXTRA HOOP FO R EVERY ADDITIONAL METER. THE BUNDLES SHALL ALSO BE PROVIDED WITH SKID (WOODEN PAC KING UNDER NEATH) TO FACILITATE HANDLING. IV) OPTIMUM WEIGHT OF THE BUNDLE SHOULD BE 2MT+-10%. MECHANICAL DAMANGE & CORROSION DURING TRANSIT IF ANY SHALL BE AT THE COS T OF SUPPLIER. [ Warranty Period: 30 Months after the date of delivery ]