Military Engineer Services-MES has published Tender For Repair / Maintenance Of Submersible Pump Set, Mono Block Pump Set, Horizontal Submersible Pump Set, Water Fountain, Dol / Star-Delta Starter And Other Machineries Of Water Supply System With Certain Connected Works At Nehru Rd, Mgsf, Aps. Submission Date for this Tender is 27-05-2024. Submersible Pump Tenders in lucknow Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 20-May-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 27-05-2024 |
| FileName | File Description | File Size |
| 241b8504-42bb-4c46-821b-b78eb2029a58.html | Tender Notice | 0 KB |
| BOQ_729673.xls | Tender Document | 0 KB |
| Tender37.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Dismantling of Oil immersed starter (electrically & mechanically) of capacity 7.5 HP to 30 HP of any make / size and transportingfrom Pump House to Contractor"s work shop for carryout necessary repairand overhauling, including re-assembling complete all as specified and directed. Note:- (i) New spares / parts will be measured & paid separately for unserviceble parts under appropriate items listed here-in-after. (ii) Quoted rate shall be deemed included of transporting, repair, overhauling and replacement of spares complete. |
| 2 | Supply only set of fixed and moving Contact suitable for Oil immersed starter complete all as specified and directed |
| 3 | Supply only of base Plate assembly suitable for Oil immersed starter complete all as specified and directed |
| 4 | Supply only set of auxiliaryswitch 1 NO (Normal open contact) + 1 NC (Normal closed contact) suitable for Oil immersed starter complete all as specified and directed |
| 5 | Supply only magnet coil with auxiliarywinding rated 415V, AC, 50 Hz suitable for Oil immersed starter complete all as specified and directed |
| 6 | Supply only thermal overload relay type RB-1 63 range 25 to 40 Amp or 36 to 60 Amp v complete all as specified and directed |
| 7 | Supply only start & Stop Switch suitable for Oil immersed starter complete all as specified and directed |
| 8 | Supply only thermal time delay, relaywithout transformer type RZ-12 having actuating time range 3 to 12 second suitable for Oil immersed starter complete all as specified and directed |
| 9 | Supply only terminal linksRYB & Delta suitable for Oil immersed starter complete all as specified and directed |
| 10 | M&L for Rewinding of unserviceable / burnt auto transformer of Oil immersed starter with existing size of copper winding wire complete all as specified and directed. |
| 11 | Supply only reset push button assembly suitable for Oil immersed starter complete all as specified and directed |
| 12 | Deployment of manpower for attending the complaint such as decarbonisation of terminals, rectification of phase reverseal, adjustment of relay, etc of Oil immersed star delta starter with auto transformer upto 50 HP capacity, round the clock including Sunday & Holiday at any location in Lucknow Cantt area with in specified time not more than four hours complete all as specified and directed. Note :- (i) Daily maintenance register shall be maintained for each starter and shall be signed by representative of contractor and the Engineer in-Charge after doing necessary maintenance. |
| 13 | Deployment of manpower / tools / machinery etc for disconnection of water supply & electric connection of submersible pump set of any size from existing system, taking out / Uplifting the submersible pump set from deep borewell, disconnected fromlowering pipe line of any size with manual or suitable electric driven chain pully upto 240 feet depth, dismentling of all flange joint of coloumn pipe, reassembling after neccesary repair, flange joiting of coloumn pipe, re-lowering the pump set in same borewell re-connection of complete all as specified and directed. Note:- (i) Repairing / replacement of spare part of pump set / pipe will be paid separately. (ii) All type of T/P required to complete the job will be arranged by contractor. (iii) Items required for motor connection such as PVC insulation tape, tie rod, valcanised rubber / puncture tube etc will be provided by the contarctor to complete the work and rate as deemed to be quoted in unit rate no extra payment will be made to the contractor. (iv) Not / bolt / rubber gasket if found unservicable will be measured & paid seperatly. |
| 14 | Supply only mild screw nut, bolts with washer 12 mm dia and 100 mm long (Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut complete all as specified and directed. |
| 15 | Supply only 3 mm thick rubber gasket (packing ring) suitable for 100 bore flange pipe complete all as specified and directed. |
| 16 | Supply only 3 mm thick rubber gasket (packing ring) suitable for 150 bore flange pipe complete all as specified and directed. |
| 17 | Transportation of submersible pump and motor set of capacity 20 HP to 30 HP, 3 phase, frompump house to contractor"s work shop,dismantling for carrying out necessary repairs / renewal of parts of motors or pump and reassembling complete motors / pump sets & depositing the same after necessary repair to site complete all as directed. Note:- (i) New spares / parts will be measured & paid separately under appropriate items listed here-in-after. (ii) Quoted rate shall be deemed included of transporting, repair, and replacement of spares complete. |
| 18 | M&L for rewinding of motor of submercible pump set of 20 to 30 HP capacity, by removing the burnt winding, cleaning slot, replacement of defective nut bolts washer etc and rewinding with using appropriate size of super enamelled copper winding wire thermal class-E, including varnishing and reassembling and testing complete all as directed by the Engineer-in-Charge |
| 19 | Straightening only of the slots of stator of submersible pump motor of 20 to 30 HP capacity complete all as specified and directed. |
| 20 | Supply only thrust bearing with block suitable for submersible pump set of 20 to 30 HP capacity complete assembly for submersible motor |
| 21 | Supply only worn out gun metal bushes suitable for submersible pump motor of 20 to 30 HP capacity as per manufacturer"s design complete all as specified and directed |
| 22 | Supply only sand guardsuitable for submersible pump motor of 20 to 30 HP capacity complete all as specified and directed |
| 23 | Supply only cable grommet (guard)suitable for submersible pump motor of 20 to 30 HP capacity complete all as specified and directed |
| 24 | Supply only water sealsuitable for submersible pump set of 20 to 30 HP capacity complete all as specified and directed |
| 25 | Supply only of Wedges of slots complete set suitable for submersible pump motor of 20 to 30 HP capacity all as specified and directed |
| 26 | Complete overhauling of submersible pump set of 20 to 30 HP capacity by carrying out, balancing of pump shaft, cutting of key slots, repairs tobowl assembly, rethreading of wornout studs holes and provding over size studs with nuts complete all as specified and directed. |
| 27 | M&L for Re-metaling of submercible pump motor shaft, of 20 to 30 HP capacity,turning to bring it to original size and shape and polishing of shaft complete all as directed |
| 28 | S&F in repair submercible pump shaft of 20 to 30 HP capacity submirceable pump, making key slot, grinding to make coupling size, and balancing the rotor complete all as specified and directed. |
| 29 | S&F in repair submercible pump motor shaft of 20 to 30 HP capacity submirceable pump, making key slot, grinding to make coupling size, and balancing the rotor complete all as specified and directed. |
| 30 | Supply & fixing in repair inlet body of motor of submersible pump set of capacity 20 to 30 HP complete all as specified and directed. |
| 31 | Supply & fixing in repair coupling of submersible motor and pump with key of 20 to 30 HP capacity complete all as specified and directed. |
| 32 | Supply only bowl bushes suitable for submersible pump set of 20 to 30 HP capacity complete all as specified and directed |
| 33 | Supply only neck ring suitable for submersible pump set of 20 to 30 HP capacity complete all as specified and directed |
| 34 | Supply only steel distance pieces & key suitable for submersible pump set of 20 to 30 HP capacity complete all as specified and directed |
| 35 | Supply only impellar of gun metal suitable for submersible pump set of 20 to 30 HP capacity as per existing complete all as specified and directed |
| 36 | Supply only cast iron, bowl suitable for submersible pump set of 20 to 30 HP capacity complete all as specified and directed |
| 37 | Supply only cast iron non return valve suitable for submersible pump set of 20 to 30 HP capacity complete all as specified and directed |
| 38 | M&L for complete removal of old painted from surfaces of submercible motor and pump set of 20 to 30 HP capacity and applying two coat of synthetic enamel paint (1st quality) over one coat of metal primer (hammer tone finish), painting shall be done with spray machine complete all as specified. |
| 39 | Transportation of submersible pump and motor set of capacity 7.5 HP to 15 HP, 3 phase, frompump house to contractor"s work shop,dismantling for carrying out necessary repairs / renewal of parts of motors or pump and reassembling complete motors / pump sets & depositing the same after necessary repair to site complete all as directed. Note:- (i) New spares / parts will be measured & paid separately under appropriate items listed here-in-after. (ii) Quoted rate shall be deemed included of transporting, repair, and replacement of spares complete. |
| 40 | M&L for rewinding of motor of submercible pump set of 7.5 to 15 HP capacity, by removing the burnt winding, cleaning slot, replacement of defective nut bolts washer etc and rewinding with using appropriate size of super enamelled copper winding wire thermal class-E, including varnishing and reassembling and testing complete all as directed by the Engineer-in-Charge |
| 41 | Straightening only of the slots of stator of submersible pump motor of 7.5 to 15 HP capacity complete all as specified and directed. |
| 42 | Supply only thrust bearing with block suitable for submersible pump set of 7.5 to 15 HP capacity complete assembly for submersible motor |
| 43 | Supply only worn out gun metal bushes suitable for submersible pump motor of 7.5 to 15 HP capacity as per manufacturer"s design complete all as specified and directed |
| 44 | Supply only sand guardsuitable for submersible pump motor of 7.5 to 15 HP capacity complete all as specified and directed |
| 45 | Supply only cable grommet (guard)suitable for submersible pump motor of 7.5 to 15 HP capacity complete all as specified and directed |
| 46 | Supply only water sealsuitable for submersible pump set of 7.5 to 15 HP capacity complete all as specified and directed |
| 47 | Supply & fix in repair inlet body of motor of submersible pump set of capacity 7.5 to 15 HP complete all as specified and directed. |
| 48 | Material & labour for balancing of pump shaft of submersible pump set of 7.5 to 15 HP capacity including cutting of key slots, repairs tobowl assembly, rethreading of wornout studs holes and provding over size studs with nuts complete all as specified and directed. |
| 49 | M&L for Re-metaling of submercible pump motor shaft, of 7.5 to 15 HP capacity,turning to bring it to original size and shape and polishing of shaft complete all as directed |
| 50 | S&F in repair submercible pump motor shaft of 7.5 to 15 HP capacity, making key slot, grinding to make coupling size, and balancing the rotor complete all as specified and directed. |
| 51 | Supply & fixing in repair coupling of submersible motor and pump with key of 7.5 to 15 HP capacity complete all as specified and directed. |
| 52 | Supply only bowl bushes suitable for submersible pump set of 7.5 to 15 HP capacity complete all as specified and directed |
| 53 | Supply only neck ring suitable for submersible pump set of 7.5 to 15 HP capacity complete all as specified and directed |
| 54 | Supply only steel distance pieces & key suitable for submersible pump set of 7.5 to 15 HP capacity complete all as specified and directed |
| 55 | Supply only impellar of gun metal suitable for submersible pump set of 7.5 to 15 HP capacity as per existing complete all as specified and directed |
| 56 | Supply only cast iron, bowl suitable for submersible pump set of 7.5 to 15 HP capacity complete all as specified and directed |
| 57 | Supply only cast iron non return valve suitable for submersible pump set of 7.5 to 15 HP capacity complete all as specified and directed |
| 58 | M&L for complete removal of old painted from surfaces of submercible motor and pump set of 7.5 to 15 HP capacity and applying two coat of synthetic enamel paint (1st quality) over one coat of metal primer (hammer tone finish), painting shall be done with spray machine complete all as specified. |
| 59 | S&F in replacement, assembly to spare parts of Submersible pump of capacity 15 HP 12 stages, incluiding bearing, bush, shaft, bowels, thrust bearing, bronze impellers of pump etc comprising / suitable fordirectly coupled with motor cast iron body for 250 mm dia borewell multi-stages, discharge of 600-800 LPM at 91 Metre head and complete with suitable end connecting tail piece, NRV complete all as specified and directed. |
| 60 | S&F in replacement, assembly tospare parts of Submersible motor of capacity 15 HP with Stator incluiding insulated copper winding, rotor, ball bearing, bush, terminal plate and casing of motor comprising with arrangement of directly coupled with pump cast iron body electric driven 415V, TP along withconnecting tail piece, NRV and submersible cable minimum 7.5 RM complete all as specified and directed. |
| 61 | S&F in replacement, assembly to spare parts of Submersible pump of capacity 25 HP 12 stages, incluiding bearing, bush, shaft, bowels, thrust bearing, bronze impellers of pump etc comprising / suitable fordirectly coupled with motor cast iron body for 250 mm dia borewell multi-stages, discharge of 600-800 LPM at 91 Metre head and complete with suitable end connecting tail piece, NRV complete all as specified and directed. |
| 62 | S&F in replacement, assembly tospare parts of Submersible motor of capacity 25 HP with Stator incluiding insulated copper winding, rotor, ball bearing, bush, terminal plate and casing of motor comprising with arrangement of directly coupled with pump cast iron body electric driven 415V, TP along withconnecting tail piece, NRV and submersible cable minimum 7.5 RM complete all as specified and directed. |
| 63 | Deployment of manpower / tools / machinery etc for disconnection of water supply & electric connectionof centrifugal pump set / monoblock pumpset of capacity 10 HP to 20 HP and removing from its existing position (for repairing etc) and re-fixing of repaired pump set including renewal ofworn out nuts & bolts and electric connection complete all as specified and directed. Note:- (i) Repairing / replacement of spare part of pump set will be paid separately. (ii) All type of T/P required to complete the job will be arranged by contractor. |
| 64 | Transportation of Centrifugal pump set / monoblock pump set of capacity 10 HP to 20 HP, AC,3 phase, 415/420 V from pump house / yard at any location, transporting to contractor"s work shop, dismantling for carrying out necessary repais / renewal of parts of pump and depositing the same after repair, reassembling complete to site all as directed. Note:- (i) New spares parts shall be measured & paid separately under appropriate items listed here-in-after. (ii) Quoted rate shall be deemed included of transporting, repair, and replacement of spares complete. |
| 65 | M&L for rewinding of motor of pump set of 10 to 20 HP capacity, by removing the burnt winding, cleaning slot, replacement of defective nut bolts washer etc and rewinding with using appropriate size of super enamelled copper winding wire thermal class-E, including varnishing and reassembling and testing complete all as directed by the Engineer-in-Charge |
| 66 | M&L for repairing of pump set of 10 to 20 HP capacity by rethreading of worn out studs holes and S&F over size studs with nut, bolt and washer complete all as specified and directed. |
| 67 | Supply only driven end bearing of motor shaft of pump set of 10 to 20 HP capacity complete all as specified and directed. |
| 68 | Supply only non driven end bearing of motor shaft of pump set of 10 to 20 HP capacity complete all as specified and directed. |
| 69 | Supply only gun metal / stainless steelbush of pump shaft of pump set of 10 to 20 HP capacity complete all as specified and directed. |
| 70 | Supply only of gland and packing of pump set of 10 to 20 HP capacity complete all as specified and directed. |
| 71 | Supply only cast iron impeller of pump set of 10 to 20 HP capacity complete |
| 72 | Supply only connection plate of pump set of 10 to 20 HP capacity complete all as specified and directed. |
| 73 | Supply only coupling with studs between motor & pump of pump set of 10 to 20 HP capacity complete all as specified and directed. |
| 74 | Supply only cover sleeve of motors as per existing size of pump set of 10 to 20 HP capacity complete all as directed |
| 75 | Re-metaling of pump shaft, turning for bring it to Internal dia size of bearing in rear end cover of pump set of 10 to 20 HP capacity complete all as directed |
| 76 | Re-metaling of motor shaft, turning for bring it to Internal dia size of bearing in rear end cover of pump set of 10 to 20 HP capacity complete all as directed |
| 77 | Supply only neck ring of pump set of 10 to 20 HP capacity complete all as specified and directed |
| 78 | M&L for complete removal of old painted from surfaces of motor and pump set of 10 to 20 HP capacity and applying two coat of synthetic enamel paint (1st quality) over one coat of metal primer (hammer tone finish), painting shall be done with spray machine complete all as specified. |
| 79 | Deployment of manpower / tools / machinery etc for disconnection of water supply & electric connectionof centrifugal pump set / monoblock pumpset /mono sub (openwell) pump set of capacity 1 HP to 3 HP and removing from its existing position (for repairing etc) and re-fixing of repaired pump set including renewal ofworn out nuts & bolts and electric connection complete all as specified and directed. Note:- (i) Repairing / replacement of spare part of pump set will be paid separately. (ii) All type of T/P required to complete the job will be arranged by contractor. |
| 80 | Transportation of Centrifugal pump set / monoblock pumpset of capacity 1 HP to 3 HP, AC,3 phase, 415/420 V from pump house / yard at any location, transporting to contractor"s work shop, dismantling for carrying out necessary repais / renewal of parts of pump and depositing the same after repair, reassembling complete to site all as directed. Note:- (i) New spares parts shall be measured & paid separately under appropriate items listed here-in-after. (ii) Quoted rate shall be deemed included of transporting, repair, and replacement of spares complete. |
| 81 | M&L for rewinding of motor of pump set of 1 to 3 HP capacity, by removing the burnt winding, cleaning slot, replacement of defective nut bolts washer etc and rewinding with using appropriate size of super enamelled copper winding wire thermal class-E, including varnishing and reassembling and testing complete all as directed by the Engineer-in-Charge |
| 82 | Supply only water seal and packing sutaible for pump set of capacity 1 to 3 HP complete. |
| 83 | Supply only gun metal bushesh for pump set of capacity 1 to 3 HP complete all as specified and directed. |
| 84 | Supply only slots of stator of motor of pump set of capacity 1 to 3 HP complete all as specified and directed. |
| 85 | Supply only neck ring sutaible for pump set of capacity 1 to 3 HP complete all as specified and directed. |
| 86 | Supply only thrust bearing sutaible for pump set of capacity 1 to 3 HP complete all as specified and directed. |
| 87 | Supply only cable grommet (guard) sutaible for pump set of capacity 1 to 3 HP complete all as specified and directed. |
| 88 | Supply only of Wedges of slots sutaible for pump set of capacity 1 to 3 HP complete all as specified and directed. |
| 89 | M&L for complete removal of old painted from surfaces of motor and pump set of 1 to 3 HP capacity and applying two coat of synthetic enamel paint (1st quality) over one coat of metal primer (hammer tone finish), painting shall be done with spray machine complete all as specified. |
| 90 | Deployment of manpower / tools / machinery etc for disconnection of water supply & electric connectionof mono sub pump set of capacity 3 HP to 10 HP and removing from its existing position (for repairing etc) and re-fixing of repaired pump set including renewal ofworn out nuts & bolts and electric connection complete all as specified and directed. Note:- (i) Repairing / replacement of spare part of pump set will be paid separately. (ii) All type of T/P required to complete the job will be arranged by contractor. |
| 91 | Transportation of mono sub (openwell) pump set of capacity 3 HP to 10 HP, AC,3 phase, 415 / 420 V from pump house / yard at any location, transporting to contractor"s work shop, dismantling for carrying out necessary repais / renewal of parts of pump and depositing the same after repair, reassembling complete to site all as directed. Note:- (i) New spares parts shall be measured & paid separately under appropriate items listed here-in-after. (ii) Quoted rate shall be deemed included of transporting, repair, and replacement of spares complete. |
| 92 | M&L for rewinding of motor of mono sub pump set of 3 to 10 HP capacity, by removing the burnt winding, cleaning slot, replacement of defective nut bolts washer etc and rewinding with using appropriate size of super enamelled copper winding wire thermal class-E, including varnishing and reassembling and testing complete all as directed by the Engineer-in-Charge |
| 93 | M&L for repairing of mono sub pump set of 3 to 10 HP capacity by rethreading of worn out studs holes and S&F over size studs with nut, bolt and washer complete all as specified and directed. |
| 94 | Supply only water seal and packing sutaible for mono sub pump set of 3 to 10 HP capacity complete. |
| 95 | Supply only gun metal bushesh for mono sub pump set of 3 to 10 HP capacity complete all as specified and directed. |
| 96 | Supply only neck ring sutaible for mono sub pump set of 3 to 10 HP capacity complete all as specified and directed. |
| 97 | Supply only thrust bearing with block complete assembly sutaible for mono sub pump set of 3 to 10 HP capacity complete all as specified and directed. |
| 98 | Supply only cable grommet (guard) sutaible for mono sub pump set of 3 to 10 HP capacity complete all as specified and directed. |
| 99 | Straightening only of the slots of stator of mono sub pump set of 3 to 10 HP capacity complete all as specified and directed. |
| 100 | Supply only of Wedges of slots sutaible for mono sub pump set of 3 to 10 HP capacity complete all as specified and directed. |
| 101 | M&L for complete removal of old painted from surfaces of motor and pump set of 3 to 10 HP capacity and applying two coat of synthetic enamel paint (1st quality) over one coat of metal primer (hammer tone finish), painting shall be done with spray machine complete all as specified. |
| 102 | Supply only stud with nut of size 8 mm x 35 mm for pumping set of any descreption complete. |
| 103 | Material & Labour for Jointing of copper conductor, 3 core submercible flat cable of any size by using puncture / rubber compound roll & tape / Sealing compound and making joint waterproof complete all as specified & directed. |
| 104 | S&F in repair 8 metre long submercible pump flat cable PVC insulated and PVC sheathed, with bare bunched multistranded copper conductor of size 6 Sqmm, 3 core,1100 volts grade conforming to IS- 694:1990 including connection with submersible pumpset complete all as specified & directed. |
| 105 | Supply and fix in repairs single phase preventor complete all as specified and directed. |
| 106 | Supply and fix in repairs star delta starter fully automatic oil cooled with auto transformer and first filling of transformer oil complete with suitable size cable for connection between starter to auto transformer suitable for 20 to 25 HP, 3 Phase, 415 V electric motar including necessary connection and fixed on stand made out of angle iron 40 x 40 x 4 mm size complete all as specified and directed. |
| 107 | Supply and fix in repairs star delta starter fully automatic oil cooled with auto transformer and first filling of transformer oil complete with suitable size cable for connection between starter to auto transformer suitable for 30 to 35 HP, 3 Phase, 415 V electric motar including necessary connection and fixed on stand made out of angle iron 40 x 40 x 4 mm size complete all specified and directed. |
| 108 | Supply & fix in repair electronic control timer type ET-100complete all as specified and directed. |
| 109 | S&F in repair submercible pump flat cable, PVC insulated and PVC sheathed, with bare bunched multistranded copper conductor of size 10 Sqmm 3 core, 1100 volts grade conforming to IS- 694:1990including connection to pump and starter complete all as specified & directed. |
| 110 | S&F in repair submercible pump flat cable, PVC insulated and PVC sheathed, with bare bunched multistranded copper conductor of size 16 Sqmm 3 core, 1100 volts grade conforming to IS- 694:1990including connection to pump and starter complete all as specified & directed. |
| 111 | Supply, fixing, jointing and testing in replacement sluice valve of size 150 mm "ISI marked" both ends flanged and drilled cast iron body class PN-1.6 conforming to IS-14846 / 2000 complete with Stainless steel spindle including necessary nut bolts rubber packing etc with all fittings, complete all as specified anddirected. For those sluice valves which are fixed with pillar of over head tank work involve such as breaking of PCC & providing new PCC will be deemed to be included in the quoted rates, contractor will also repair the demaged floor etc. to match with existing. |
| 112 | S&F in repair cast iron Non Return valve (NRV) both end flanged 150 mm dia ISI marked without bypass arrangement including jointing material such as nut, bolts and washer, packing including commissioning and testing complete all as specified and directed |
| 113 | Surface dressing & Cleaning away all grass vegetation, sapling ,shrubs, brush wood , udergrowth, roots and trees not exceeding 30 cm girt ( measured one meter above ground level) and removing rubbish upto a distance of 50 mtr outsidem theriphery of the area under clearnece except in the case of surface dressing which incldues for all the foregoing except clearing away of trees complete all as specified and directed. |
| 114 | S&F in repair tailpiece made out of 100 mm bore mild steel ERW pipe, heavy grade 1500 mm long, suitable for submersible pump upto 30 HP including making arrangements for fixing of tie rod, cutting thread & welding flange complete all as specified and directed. |
| 115 | Supply, Installation, Testing and commissioning of motor actuated butterfly valve in replacement withthe following specifications including allaccessories mentioned as under (a) Valve size 150 mm dia (b) Designed line pressure 4 kg/Sqcm (c) Operating Angle : 90 degrees (d) Disc material CI with nylon coating (e) Limit switches : 02 Nos for open and close (f) Mounting : Splash proof-Direct on valve (g) Input Supply : 230V, AC, 50 HZ (h) In built wireless modem compatibility for remote communication (j) Valve position indication with an output of 4-20m A (k) The actuator should be capable of accepting 4-20m A of input of regulating purposes (l) Mannual Operation : Hand Wheel Make : RITETROK / EMTORK / HASSEL |
| 116 | S&F in repair 50 mm dia double wall corrugated (DWC) HDPE Pipe, laid in trenches or fixed on wall complete all as specified and directed. |
| 117 | Note for all items of this BOQ: - (i) Contractors special attention is invited that due to being water supply related work, work will be executed round the clock including Sunday / holiday. (ii) Contractor is required to deploy there repairing team / tools etc as and when directed by Engineer-in-Charge through verbal / telephone / WhatsApp’s etc. (iii) Contractor is required to provide mobile No of himself / there supperviser, to Engineer-in-Charge. |
| 118 | Note for all items of this BOQ: - (iv) Contractor is required to repair the pump (any type) / starter etc within 48 hours from time of receipt of complain failing which a penalty of Rs 200.00 (two hundred) per hours subjected to maximum of Rs 5000.00 (five thousand) per complain will recover from RAR / Final bill. Engineer-in-Charge is required to maintained documentary evidence of receipt of complain by the contractor.In case any dispute between the contractor & Engineer-in-Charge decision of Accepting Officer will be final & binding. (v) Contractor will deploy proper skilled man power for execution of work having ITI with 2 years’ experience or 5 years’ experience for execution of similar type work. Contractor will submit documentary evidence for qualification / experience of the manpower to Engineer-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
