Military Engineer Services-MES has published Tender For Provision Of Toilet For 40 Tps At Dtf Of Rvc Centre And College And Improvement Of Existing Electric Infrastructure By Converting Overhead Electric Lines To Underground From Mes Sub Station To Bunglow No 199 At Ebs Babugarh And Provn Of Ligh. Submission Date for this Tender is 16-05-2024. Toilet Bathroom Tenders in meerut Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 07-May-2024 | Revised BOQ | BOQ | 16-05-2024 |
| 2 | 08-May-2024 | Date corrigendum | Date | 20-05-2024 |
| Sl. No. | Item Description |
| 1 | M&L for earthing with copper plate of size 60cm x 60cm x 3.15mm thick electrode and 20 x 3 mm copper strip as earthing lead, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level.connected to copper earth strip by means of bolts, nuts, check nuts and washers all as shown in electrical plate No 5 connected to earthing test points all as described in MES schedule Part I including excavation, earth work concrete pit with 50mm thick RCC cover in RCC 1:2:4 type B-1 duly reinforced with MS bars 6mm dia @ 150C/G both ways and pit chamber in PCC 1:2:4 TYPE B-1 with 2 No"s suitable lifting handles of 12mm MS bar and GI protection pipe of 20mm dia and watering pipe 20 mm dia with washer funnel with wire mesh, test point and extra length up to 7.5 mtr (beyond 7.5 mtr will be measured seperately) connected to main switch board all as specified. Note : On testing after completion if desired earth resistance not 1.5 Ohms is not obtained the earthing will be redone at no extra cost. |
| 2 | M&Lfor earth continuity of main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required of size 20 x 3mm copper strip with fixed saddles complete all as specified and as directed. |
| 3 | M&L forearth continuity of main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required of size 25 x 3mm aluminium strip with fixed saddles complete all as specified and as directed. |
| 4 | M&L for test point terminal block made of gun metal or phosphoras of size 75 x 75 x 25mm drilled and screwed including 3 No"s 08 mm dia, 25mm long hex heat screws including sheet metal box of suitable size complete all as specified and directed. |
| 5 | M&L for fixing the Air termination, single pointed aluminium rod 12mm dia and 300mm long including PCC foundation for mounting air terminal and GI pipe of suitable size 1.5 mtr complete all as specified and directed. |
| 6 | Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for laying of Cable or Pipe etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/ losse soil and leveling of bottom surface to required level complete all as specified and as directed. |
| 7 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. in soft/ losse soil complete all as specified and as directed. |
| 8 | Supply and spreading clean fine dry river sand in trenches for cushioning of under ground cable/ cable duct complete all as specified and as directed.Note: Only punned thickness shall be measured for payment purpose. |
| 9 | M & L for fly ash brick protection length of brick shall be laid across the length of the cable complete all as specified and directed. |
| 10 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting pointin soft/ losse soil complete all as specified and as directed. |
| 11 | Supplying, laying,testing and commissioning of following sizes XLPE insulated and overall PVC sheathed armoured (Heavy duty) Aluminium conductor cable, suitable for working voltage upto and including 1100 Volts , laidand tied on overhead cable trays; or laid and tiedover MS supports in masonry trenches including providing MS supports and clamps for fixing to supports ; or buried in ground as per specifications.including termination with single compression brass glands complete all as specified and as directed: (a) 240 sqmm 3.5 core Al |
| 12 | (b) 50 sqmm 3.5 core Al |
| 13 | (c) 25 sqmm 3.5 core Al |
| 14 | (d) 16 sqmm 4 core Al |
| 15 | (d) 16 sqmm 2 core Al |
| 16 | Supply, installing, design, fabricate, testing and commissioning, factory made and tested, CPRI approved, LT Panel board with all accessories.LT Panel board, OUT DOOR type, platform mounted, suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system, having bus bar chamber with insulated Aluminum busbars 2 installed on porcelain / SMC insulators and all interconnection between main busbars as well as outgoing feeders shall be carried out with TPN Aluminum busbar of rating not less then 1.5 times rated capacity of individual out going feeders. The panel shall be dust and vermin proof, IP 56 class protection and made of 3.15 mm CRCA MS sheet and 50x50x6mm thick angle iron frame work, bottom channel of size: 70x40x5 mmpowder coated finish over one coat of red oxide primer outside and two coats of red oxide primer on inside,front / back opening type, andfixing 2 Nos.danger notice plate with letter, figures and conventional skull bones in signal red colour and fixed front & back door to LT panel etc with voltage and danger indiated in Hindi and English, with double door shutter and locking arrangement with stranded lock with 2 keys,internal wiring with PVC insulated,stranded copper conductor, FRLSH cables, IS-694marked of adequate size but not less than 1.5 Sqmm. The platform shall be such that it is of a height 30cm above the nearest groundlevel. complete all as specified and directed including connections of all out going/in coming existing cables of size 25 to 400sqmm by drawing /digging out cable from loops in trenches/ ductsout side the Bldg inclusive of necessary excavation and earth work as required and relaying the cables with retrieved bricks and providing new sand cushioning and crimping suitable size Alluminium lugs for terminal connections of cables, necessary PCC foundation with plastering to the Panel board,All out going feeders shall be connected by cable through suitable size gland plate / glands.& The various feeders shall be indicated by 50 mm size letters in synthetic enamel white paint. complete all as specified and as directed by Engr-in-Charge. |
| 17 | (I) Incoming :- (i) Aluminum busbar, 4 Pole, 400 Amps (ii) MCCB 4P, 250A, 36 KA, with thermal magnetic: O/L & S/Cprotection , ICS= 100% ICU= 01 Nos. (iii)Ammeter Digital type, CT operated 0-630A range, MAKE: SECURE / L&T (with selector switch and CT) - 01 Set (iv)Volt Meter Digital type 0-500 V range, Make:SECURE / L&T(With selector switch) - 01 No.(iv ) Indicating Lamp LED type 240 V 50 HZ AC supply (Make BCH/SIEMENS/L&T) set of three colour (RYB)-01 set. (II) Outgoing :- (i) MCCB 4P, 160A, 25 KA, with thermal magnetic: O/L & S/Cprotection , ICS= 100% ICU= 01 Nos. (ii) MCCB 4P, 100A, 25 KA, with thermal magnetic: O/L & S/Cprotection , ICS= 100% ICU= 02 Nos.(iii) MCCB 4P, 63A, 16 KA, with thermal magnetic: O/L & S/Cprotection , ICS= 100% ICU= 01 Nos. |
| 18 | Dismantling old existing U/S steel pole 9 mtr long of any type all as specified |
| 19 | Dismantling the existing LT over head line (ACSR conductor) carefully any size from LT pole including disconnecting electric connection) complete all as specified & directed. |
| 20 | Dismantling/taking down carefully insulator any size and any type from existing LT lines complete all as specified and directed. |
| 21 | Dismantling of cross arms of MS channel or angle iron section with clamps etc. complete all as specified and directed. |
| 22 | Dismantling the existing stay assembly complete all as specified and directed. |
| 23 | Supplying, installing, design, fabricate,commissioing and testing of LT switchgear panel board ( Kiosk),IP-55 (outdoor type) , 415 Volts, 50 Hz, AC supply, three phase and neutral ( 4 wire) ,200 Amps coloured horizontal tinned Aluminium bus bars , factory made out of 3.15mm thick MS sheetstructure mounted onrigid mild steel angle iron frame of 50mmx50mmx5mm with 400mm long extended legs grouting in PCC 1:2:4 type B1 of size 150mmx150mmx250mm , duly epoxy powder coated internally and externally with approved shade, rubber gasketted, hinged front double doorand back openable doors with proper locking arrangements for dust and vermin proof ,complete including adjustable thermal and fixed magnetic release MCCB 4 pole, 100 Amps, 415V,36 KA,50 hz-01 No (incoming),suitable size cable allay,lugs , glands and making connections/ wiring with suitable size SC PVC insulated copper conductor cableall as specified. |
| 24 | M&L earthing complete with galvanised steel earth plate electrode, 600 x600 x 6mm thick burried directly in the ground (earth pit not less than 3.25 mtr deep below ground level) withtop edge of the plate not less than 1.5mtr below ground level connected to galvanised strip 25x4 mm size as earthing lead by means of bolts, nuts, check nuts and washers of GI up to test point, GI tubing 15 mm bore medium grade protection pipe, GI watering pipe 20mm bore light grade with funnel and wire mesh, charcoal, salt complete all as per SSR with PCC chamber, 50mm thick RCC cover in 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8mm dia TMT bar @ 80mm c/c both way including earth workin any type of soil , removal of surplus soil to a distancen.exc 50m and connecting , testing on completion all as shown on electricplate No 03 of SSR -2009 Part I complete all as specified and directed.(Note: Excavation and earth work is deemed to be included in the rates quoted). |
| 25 | Material and labour for GI tubing light grade 100 mm bore for passing through cables, laid in treanches, under the floor, along the wall or along the pole with necessary clamps, nuts, bolts and washers etc. and making good disturbed surface of wall, floor etc complete all as specified and directed . |
| 26 | Material and labour for GI tubing light grade 50 mm bore for passing through cables, laid in treanches, under the floor, along the wall or along the pole with necessary clamps, nuts, bolts and washers etc. and making good disturbed surface of wall, floor etc complete all as specified and directed . |
| 27 | Material and labour for GI tubing light grade 40 mm bore for passing through cables, laid in treanches, under the floor, along the wall or along the pole with necessary clamps, nuts, bolts and washers etc. and making good disturbed surface of wall, floor etc complete all as specified and directed . |
| 28 | M & L for drilling suitable dia horizontal bore holes for insertion / laying of 50/100mm bore GI tubing of any description below/under road surface/floorsetc with using mechanical or manual devices as required at site including making good disturbed surface to match with the existing streta after laying pipes complete all as specified and directed |
| 29 | S&F thermoplastic polystyrene /polycarbonate enclosurebus bar chamber , shock proof , vermin proof and dust proof complete with04 Nos aluminium strip of capacity 100 amps including non metalic clapms and GI nut bolts and washers of suitable size and fixed on pole / wall complete all as specified and directed. |
| 30 | S&F 3 core , strandedcopper conductor cable 1.5 sqmm, PVC insulated and PVC sheathed , 1100 Volts grade for making connections from junction box tostreet light fittings including PVC conduit of size 20mm dia including necessary clampscomplete all as specified and directed. |
| 31 | M&L for point wiring with 1.5 Sqmm (nominal cross section area) single core, multi stranded PVCinsulated, unsheathed copper conductor, FRLS cable in and including in rigid pvc conduit 20 mm dia or higher medium grade ISI marked complete with all steel conduit accessories / fittings and sunk pressed (1.2 mm thick) steel terminal switch boxes with 3 mm thick plastic laminated hard glossy surface sheet top cover, including earth wire continuous of PVC insulated, unsheathed 1.5 Sqmm copper conductor, PVC insulated connected to all fittings, sunken boxes and common earth, earth dolly. Plastic sheet screwed with brass screws, cup washers complete all as specified and directed for the following:- (a) One light/exhaust/ fan point controlled by one, one way switches 5/6 Amps. |
| 32 | (b) One 3 pin 5/6 Amps socket outet point on independent board, controlled by one, one way 5/6 Amps switch. |
| 33 | (C) One 3 pin 5/6 Amps socket outet point on same board, controlled by one, one way 5/6 Amps switch. |
| 34 | M&L for point wiring with 2.5 Sqmm (nominal cross section area) single core, multi stranded PVC insulated, unsheathed copper conductor,FR, cable in and inrigid pvc conduit 20 mm dia or higher medium grade ISI marked complete with all steel conduit accessories / fittings and sunk pressed (1.2 mm thick) steel terminal switch boxes with 3 mm thick plastic laminated hard glossy surface sheet top cover, including earth wire continuous of PVCinsulated, unsheathed 2.5 Sqmm copper conductor, PVC insulated connected to all fittings, sunken boxes and common earth, earth dolly. Plastic laminated sheet screwed with brass screws, cup washers complete all as specified and directed for the following :- (a)One 3 pin socket outlet, 15 amps, with cables 2.5 sqmm size on independent board, controlled by one, one way 15 amp switch. |
| 35 | S & F Switch piano flush button single pole one way 5 amp complete all as specified and directed. |
| 36 | S & F Socket outlet 3 pin, 5 Amps, flush type complete all as specified and directed. |
| 37 | S & F Switch piano flush button single pole one way 15 amp complete all as specified and directed. |
| 38 | S & F Socket outlet 3 pin, 15 Amp, flush type complete all as specified and directed. |
| 39 | S & F ceiling rose, surface type, bakelite, 65 x 50 mm, three terminal complete all as specified and directed. |
| 40 | Supply & fix LED lamp 9 W 6500k,240V complete all as specified anddirected. |
| 41 | S & F lamp holder insulated body with back plate fix done anodised 100 x 100 mm pressed steel box flush to the wall with 3 mm thick backlite cover complete all as specified and directed. |
| 42 | S&FLED tube light fitting T/5 surface mounting poly carbonate 240 volts 20 watts, 6500K complete all as specified & directed. |
| 43 | S&F LED tube light fitting T/5 surface mounting poly carbonate batten 240 volts 10 watts, 6500K complete all as specified & directed. |
| 44 | M&L for Building security light fitting 1 x 35 LED type, drawn through and including GI bracket of size 25 mm dia bore light grade 1.4 mtr long, bend to shape including MS clamps made out of flat iron of size 32 x 4 mm - 02 Nos and necessary nuts, bolts, washer as required complete all as specified and directed. |
| 45 | M&L for GI light grade tubing 40mm dia laid in trenches, road crossing , pasing through pipe or laid in wall/polecomplete all as specified and directed. |
| 46 | S&F Exhaust fan steel bodyAC single phase 230/240V size 300 mm sweep with blades, and louvers. complete all as specified and directed. |
| 47 | S&F sheet metal enclosure single pole & neutral for 240 volts 4 way with 200 Amp rated bus bar flush /surface mounting double doorcomplete all as specified and directed. |
| 48 | S&F MCB single pole 240 volt 6 to 32 amps 10 KAcomplete all as specified and directed. |
| 49 | S&F Water heater storage type steel body with SS/Glass lined inner tank and heating element upto 2KW capacity 25 ltr, BEE 5 stared complete with a rating including providing of hold fast in wall and PVC connection 45 cm long with 15 mm dia brass union at both end heavy duty complete all as specified and derected by Engr-in-charge. |
| 50 | S&F MCB SPN 32 Amps, 240 volts, 50 Hz suitable for fixing in MCB DB "C" series complete all as specified and as directed. |
| 51 | M&L for Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 Mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised earth lead wite 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specifiied or indicated including testing on completioncomplete all as specified and as directed. |
| 52 | Supply only PVC connections 15 mm size with PTMT nuts of length 450 mm suitable for hot & cold water connection complete all as directed. |
| 53 | M&L for cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete and sub base of floor complete all as specified and directed. |
| 54 | M & L brick work with sub classfly ash bricks straight or curved on plan exc 6 m mean radis built in CM 1:6 complete all as specified & directed |
| 55 | M & L for brick work with sub classfly ash bricks straight or curved on plan exc 6 m mean radis built in CM 1:4 complete all as specified & directed |
| 56 | M&L for 75mm thick PCC 1:3:6 type C-2 ( 40 mm graded aggrgate) as in plinth protection, path, sub base etc finished the surface even & fair complete all as specified & directed |
| 57 | M & L for Halfbrick work with sub classfly ash bricks straight or curved on plan exc 6 m mean radias built in CM 1:4 complete all as specified & directed |
| 58 | M&L forReinforced cement concrete design mix M-25 (using 20 mm graded crushed stone aggregate) foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 59 | M&L forReinforced cement concrete design mix M-25 (using 20 mm graded crushed stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed. |
| 60 | M&L forReinforced cement concrete design mix M-25 (using 20 mm graded crushed stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 61 | M&L forReinforced cement concrete design mix M-25 (using 20 mm graded crushed stoneaggregate) as in slabs complete all as specified and directed. |
| 62 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work;rough finishedflatsurfaces of concrete complete all as specified and directed. |
| 63 | Formwork to sides ofsquare, rectangular or polygonal pillars, posts, struts, piers, columns and stanchions rough finished flatsurfaces of concretecomplete all as specified and directed. |
| 64 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finished flatsurfaces of concretecomplete all as specified and directed. |
| 65 | Use & waste of form work for rough finishedflatsurface to soffit of suspended slabs such as roof slabs,floor slabs, landing and similar work n.exc 200mm thick (horizontal or sloping) complete all as specified and directed. |
| 66 | Use & waste of form work for rough finishedflat surface to edges of concrete flat, break in floor.cills,railings etc.& similar works, exc 10 but n exc 20cm wide complete all as specified and directed. |
| 67 | Preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of cement base primer on plastered surface of wall and priming surface with priming paint complete all as specified and directed. |
| 68 | M&L for prepration of new plastered surfaces of wall and applying three coats of white wash complete all as specifed and directed. |
| 69 | M&L three coats of white wash on newly plastered surfaceor unplastered surfaces of celling including preparation surface complete all as spd and directed. |
| 70 | M&L colours, Non-skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, in floors etc.set and jointed in neat cement slurry pointed in or coloured cement to match, including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 71 | S & F Glazed ceramic colured tiles in vertical surface 300x 450 x 7mmthick set and jointed in neat cement slurrypointed in white or coloured cement to match, laid over and including 10mm thick bedding layers in cement mortar 1:4 and, complete all as specified and directed |
| 72 | S&F GI water tubing medium grade galvanised with all fitting complete etc fixed to walls, floors and ceiling 15 mm bore complete all as specified and directed |
| 73 | Ditto all as per item, No 71.00 abovebut 20 mm dia complete all as specified and directed |
| 74 | S&F 20 mm dia stop valve cast copper alloy screwed down, high pressure with crutch or butterfly handle screwed down both ends for iron pipe or for brassferrule fixed in repair all as specified. |
| 75 | S&F 15mm bore dia bib tap chromium plated, fancy type cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 76 | S&F Angle stop cock fancy type, brass chromium plated with CP cup 15 mm bore fixed in complete all as specified and directed |
| 77 | S&F for 15 mm CP brass pillar tap with capasten head screwed down high pressure with or without lettered "HOT" or "COLD" with long screwed for iron pipe complete all as specified and directed |
| 78 | S&FVitreous china wash hand basin, white flat, size 550 x400 mm incl brackets CP brass waste coupling and PVC waste pipe all as specified and directed. |
| 79 | S&F for looking mirror of size 600 mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup screws complete all as specified and directed. |
| 80 | S & F soap dish, vitreous china white size 160X160X90mm ,fixed to plugs withchromiumplated brass screws complete all as specified and directed |
| 81 | S & F PVC connection 15 mm size with PTMT nuts and45 cm long complete all as specified and directed |
| 82 | S & F PVC 10 ltrs capacity syphonic action, valve type flushing cistern low levelwhite with inlet ball valve float and handle including brackets complete all as specified and directed. |
| 83 | S & F vitreous china wash down water closet (Padestal type) white with "P" or "S" trap complete all as spcified and directed. |
| 84 | S&F 110 mm dia PVC (SWR) pipes any length and in floor complete all as specified and directed |
| 85 | S&F 75 mm dia PVC (SWR) pipes any length and in any position (with clamps in wall) complete all as specified and directed |
| 86 | S&F PVC (SWR) bends 110 mm dia complete all as specified and directed |
| 87 | S&F PVC (SRW) vent cowl for 75 mm dia PVC pipe complete all as specified and directed. |
| 88 | S&F rotational moulded water storage tank (cylinderical vertical with closed top ) hoisted and fixed in position capacity 500 ltrs with 20mm bore brass float valve complete all as specified and directed |
| 89 | S&F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cementcomplete all as specified and directed |
| 90 | S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners (rates inclusive in quoted rate). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madecomplete all as specified & directed. |
| 91 | S & F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 92 | S&F MS butt hinges of size 100mm ,medium weight cold rulled complete all as specified and directed |
| 93 | S&F aluminium anodised tower bolt ,anodised ,length of bolt 150 mm complete all as specified and directed |
| 94 | S&F Aluminium anodised Cast type handle of 150mm size complete all as specified and directed |
| 95 | S&F mild steel ventilator /windowwith top hung shutter incl, MS peg stay etc complete all as specified and directed |
| 96 | M&L for prepartion of undecorated steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying twocoats of synthetic enamel paint over a coat of red oxide complete all as specified and directed. |
| 97 | S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of apperture 1.18 mm fixed with tinned tack or galvanised wire stapples all as specified. |
| 98 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqmin each pan complete all as specified and directed. |
| 99 | S&F full stall pattern urinal pot, basin of vitreous china white including connection to flusing pipe and out going pipes including PVC waste pipe & CP coupling compete all as specified and directed. |
| 100 | S&F vitreous china squatting pan of pattern "long pan; size 580mm while with "P" &"S" trap or back inlet and foot rests any pattern compete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
