Military Engineer Services-MES has published Tender For Repair/Replacement Of Di/Gi/Ms Pipes Of Various Sizes Cleaning Of Semi Ug Sump, Rcc Over Head Tanks Of Various Capacity At Jaighat, Chinta, Chnchora, Ghati More, New Klp And Old Campus At Bhalra Mil Stn Under Age (I) Bhalra. Submission Date for this Tender is 29-05-2024. MS Pipe Tenders in Doda Jammu And Kashmir. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 22-May-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 29-05-2024 |
Sl. No. | Item Description |
1 | Excavating in trenches in any type of soil, not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out, complete all as specified and as directed. |
2 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed. |
3 | Removing excavated soilsnot exceeding 50 metres and depositing where directed at a level not exceeding 1.5metre above the starting point, complete all as specified and directed. |
4 | Demolition of cement concrete (unreinforced) any description and any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-Charge |
5 | Material and labour for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling, basement and mass concrete for Bend, Support Pipe any description and any position all as specified directed. |
6 | Supply and fixing by renewal of GI tubing, medium grade, ISI marked complete with all fittings, laid in trenches or laid under floors, fixed on wall with and providing clamps etc complete all as specified & directed, for the following size:- |
7 | 150mm bore |
8 | 100mm bore |
9 | 80mm bore |
10 | 50mm bore |
11 | 40mm bore |
12 | 25mm bore |
13 | 20mm bore |
14 | 15mm bore |
15 | Disconnecting and taking up old existing GI pipe and connection of any description / grade and in any position of trenches / under floors/ on walls etc including connectedfitting/ accessories and fixtures such as bend, Union, elbow socket etc. all as directed and specified for the following sizes :- |
16 | 150mm bore |
17 | 100mm bore |
18 | 80mm bore |
19 | 50mm bore |
20 | 40mm bore |
21 | 25mm bore |
22 | 20mm bore |
23 | 15mm bore |
24 | Taking out old unsv cast iron joint /tee of any type, supply and lay cast iron Spigot and socket/pipes Bend (any temerarious and angle) taper any type branches cross all sockets and spigot collar caps and plug for upto 150mm bore pipe complete all as specified and directed. |
25 | All as per Item No. 08 but for 200 to 300 mm bore pipe. |
26 | Material and labour for run lead joint for cast iron spigot and socket end CI pipe class and CI special fitting to complete of thefollowing sizes all as specified and directed :- |
27 | 250mm bore |
28 | 200mm bore |
29 | 150mm bore |
30 | 100mm bore |
31 | 80mm bore |
32 | Taking down old existing sluice valve and supply and fixing new sluice valve PN-1.6with stainless steelspindle conforming to IS-14846-2000 doubles flange and including new flanged rubber joints complete suitable forfollowing sizes including necessary nuts bolts with washer and rubber gasket to pipe of following size :- |
33 | 200 mm bore |
34 | 150 mm bore |
35 | 100 mm bore |
36 | 80 mm bore |
37 | Taking down old existing gate valve and supply and fixing new gun metal gate valves with iron wheel head screwed both ends for iron pipe, incl pessure rating upto 25kg/cm2 of following size :- |
38 | 50 mm bore |
39 | 40 mm bore |
40 | 25 mm bore |
41 | 20 mm bore |
42 | Taking down old existing butterflyvalve and supply and fixing new stainless steelbutterfly valves both ends flanged sutable for existing fittings,incl pessure rating upto 25kg/cm2 ofsize 100mm bore completeall as specified and directed. |
43 | All as per Srl Item No.13 here-in-before but 80mm bore |
44 | Making bore holes by drilling and tapping cast iron water mains (in position) for branch connections of the in GI pipe incl cutting of pipe where reqd for making any branch connection, repairing branch connection pipe including providing and fixing of suitable clamps of required size etc. complete for following sizes :- |
45 | 20mm bore |
46 | 15 mm bore |
47 | Dismantling and opening carefully old non-functional sluice valve of any description and in any position for servicing, over-hauling/greasing etc, and replacement of old unserviceable / worn out parts and reassembling the sluice valve and testing complete all as specified anddirected by the Engineer-in-Charge for following bores :- |
48 | 250 mm bore |
49 | 200 mm bore |
50 | 150mm bore |
51 | 100 mm bore |
52 | 80 mm bore |
53 | Supply and fixing in replacement of 200 mm bore, ISI make, of approved quality, cast iron non return valve, both ends flanged jointed and tested complete all as specified and directed. |
54 | Supply an fixing in replacement of 150 mm bore, ISI make, of approved quality, cast iron non return valve, both ends flanged jointed and tested complete all as specified and directed. |
55 | All as per Srl Item No.18 above but the size of non return valve of 100mm bore |
56 | Supply & fix short length Cast Iron detachable joint complete with nuts, bolts, washers and Superier quality of rubber ring set suitable for following sizes :- |
57 | 200mm bore |
58 | 150mm bore |
59 | 100mm bore |
60 | 80mm bore |
61 | Supply and fixing long length Cast Iron detachable joint complete with nuts, bolts, washers and superier quality of rubber ring set suitable for following sizes :- |
62 | 200mm bore |
63 | 150mm bore |
64 | 100mm bore |
65 | 80mm bore |
66 | Welding joints for CI / DI / MS pipes including jointing material such as welding rods etc. complete for pipe of following sizes all as specified and directed :- Note : The contractor shall make his own arrangement for Welding Machine and DG set required for welding work and nothing extra from the department shall be admisible on this account. |
67 | 400 mm bore |
68 | 300 mm bore |
69 | 200 mm bore |
70 | 150 mm bore |
71 | 100 mm bore |
72 | 80 mm bore |
73 | Stainless Steel (SS) Non Return Valve without by-pass arrangement, swing type, confirming to IS:5312, flanged ends, all nuts, bolts, washers, gaskets etc. of following sizes, including dismantling of old unserviceable NRV, complete all as specified and directed :- |
74 | 300 mm bore |
75 | 200 mm bore |
76 | 150 mm bore |
77 | 100 mm bore |
78 | 80mm bore |
79 | Supply and fixing in replacement air release valve with double chamber of bore confirming to IS 14845 including taking out unserviceable air release valve complete all as specified and directed by Engineer-in-Charge of the following sizes :- |
80 | 50 mm bore |
81 | 80 mm bore |
82 | 100 mm bore |
83 | Supply and fixing Stop valves of cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete of the following description including taking out the old unserviceable stop valve complete all as specified and directed :- |
84 | 50 mm bore |
85 | 40 mm bore |
86 | 25 mm bore |
87 | 20 mm bore |
88 | 15 mm bore |
89 | Supply and fixing GI Socekt of Havey grade with and including jointing meterial and taking out old unserviceable socket complete all as specified and directed of following sizes :- |
90 | 50 mm bore |
91 | 40 mm bore |
92 | 25 mm bore |
93 | 20 mm bore |
94 | 15 mm bore |
95 | Supply and fixing GI Union ofHavey grade with and including jointing meterial and taking out old unserviceable Union complete all as specified and directed of following sizes :- |
96 | 50 mm bore |
97 | 40 mm bore |
98 | 25 mm bore |
99 | 20 mm bore |
100 | 15 mm bore |
101 | Supply and fixing GI Elbow ofHavey grade with and including jointing meterial and taking out old unserviceable Elbow complete all as specified and directed of following sizes :- |
102 | 50 mm bore |
103 | 40 mm bore |
104 | 25 mm bore |
105 | 20 mm bore |
106 | 15 mm bore |
107 | Supply and fixing6 "Nipple ofHavey grade with and including jointing meterial and taking out old unserviceable Nipple complete all as specified and directed of following sizes :- |
108 | 50 mm bore |
109 | 40 mm bore |
110 | 25 mm bore |
111 | 20 mm bore |
112 | 15 mm bore |
113 | Supply and fixing 12 "Nipple ofHavey grade with and including jointing meterial and taking out old unserviceable Nipple complete all as specified and directed of following sizes :- |
114 | 50 mm bore |
115 | 40 mm bore |
116 | 25 mm bore |
117 | 20 mm bore |
118 | 15 mm bore |
119 | Draining out water from RCC Semi Underground Sump of under mentioned capacity, taking out sludge and depositing the same outside the Cantt area at a place meant for the purpose, removing all scale, dirt, algae, vegetation if any and flushing after cleaning with water and bleaching powder, cleaning walls and floors by scratching with wire brushes and writing the "Date of Cleaning" outside all as specified and directed :- |
120 | 2,00,000 Gallons |
121 | 1,50,000 Gallons |
122 | 1,00,000 Gallons |
123 | 50,000 Gallons |
124 | Cleaning of RCC Open Sump of capacity 0.50 Lakh Gallons by draining out of water, taking out the sludge deposited, cleaning of Wire Mesh Nets / walls and floor by scratching with wire brushes at Jaighati complete all as specified and as directed. Notes : 1.The Contractor has to make arrangements for closing / diverting flowing water of Jai Nullah using mechanical means viz. JCB etc. before the cleaning commences and making good the disturbed surface after the cleaning process ends all as directed. 2. The area upto 15 metres from the outer walls of the Sump shall be cleaned by removing the silt / sand / pebbles / stones etc. deposited / accumulated using mechanical means viz. JCB etc. and the excavated material shall be removed to a distance not exceeding 100 metres all as directed. 3. The Quoted Rates shall be deemed to be inclusive of the above mentioned aspects and nothing extra from the department shall be admissible on this account. |
125 | Masonry Valve Pit with PCC 1:4:8 type D-2 as in foundation, Brick Work 23cm thick in CM 1:4, 15mm thick plaster in CM 1:4 internally and flush pointing in same mortar as the work proceeds externally, 40mm thick flooring in PCC 1:2:4 type B-1 laid over 75mm thick hard core, top cover shall be made out of MS sheet 10 SWG thickness fixed in angle iron frame made out of angle size 40 x 40 x 6mm with 12mm dia handle and two number hinges on one side and locking arrangement at other side complete including painting with two coats of sythetic enamel paint over a coat of red oxide primer, complete including earth work, excavation, disposal of surplus spoil not exceeding 50m all as specified and directed of the following sizes :- |
126 | 950mm x 950m x 950mm (internal dimension of chamber) |
127 | 600mm x 600m x 950mm (internal dimension of chamber) |
128 | 450mm x 450m x 700mm (internal dimension of chamber) |
129 | Supply only High Strength Calcium based granular disinfectant for water treatment, more stable than chlorine gas, and stronger than Bleaching Powder and Sodium Hypochlorite of following specifications :- (a) Chemical analysis & physical observations : Description : Whitish granules of granular size (Mesh passing through – 100 BSS) : 1.1 (± 0.1) % , Water / moisture : 5.00 (± 0.2) % Other insoluble Calcium salts: 1.1 (± 0.1) % Mercury and other Heavy Metal contaminants : BDL (The chlorination chemical must contain appropriate quantities of dispersants / corrosion inhibitors to prevent encrustation / scaling in distribution systems) (b) Strength in terms of quantity of chlorination chemical required to obtain free chlorine of 1 ppm per lakh litres of water : Requirement must be 100 gm. per one lakh litre of water to achieve 05-1.0 ppm Av. Cl. at injection point (Site and raw water quality variations may apply additionally). (c) Stability : Projected shelf life of chlorination chemical must be one year with minimal loss of chlorine. |
130 | Supply only Hypochlorous Acid (HOCL) for chlorination of drinking water disinfection solution having high residual effect, clear colour less and potent germicide non-corrosive and non-foaming, stable upto100° C for drinking water as and when required in HDPE Jerrycans of 35 litres capacity having the following features :- (a) Potent germicide (b) Slim control (c) High residual effect to avoid contamination (d) Less hazardous (e) Work at low dosage in post disinfection (f) No after taste (g) Most reliable in operation (h) Eco friendly and biodegradable |
131 | Supply only Poly Aluminium Chloride Powder AC / 1005 suitable for treatment of raw water, complete all as specified & directed. |
132 | Supply only Calcium Hypochlorite (Bleaching Powder) Each bag 25 Kg pkt for water treatment all as specified anddirected by Engineer-in-Charge. |
133 | Supply only Solid crystel Alum (Aluminium sulhate) suitable for treatment of Raw water all as specified and directed by Engineer-in-Charge |
134 | Draining out water from RCC Semi Underground Sump of under mentioned capacity, taking out sludge and depositing the same outside the Cantt area at a place meant for the purpose, removing all scale, dirt, algae, vegetation if any and flushing after cleaning with water and bleaching powder, cleaning walls and floors by scratching with wire brushes and writing the "Date of Cleaning" outside all as specified and directed :- |
135 | 40,000 Litres |
136 | 30,000 Litres |
137 | 20,000 Litres |
138 | 10,000 Litres |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail