Military Engineer Services-MES has published Tender For Additional/Alternator And Up Gradation Of Offers Jcos Or Md Accommodation And Connected Wks At Ratnuchak Under Ge Kaluchak. Submission Date for this Tender is 29-05-2024. Mobile Generator Tenders in kaluchak Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| b46e3181-7e19-427f-8af3-e32b4a8bf22d.html | Tender Notice | 0 KB |
| BOQ_729573.xls | Tender Document | 0 KB |
| Tender.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames ( without taking down shutters from the frame) not exceeding 1.5 Square Meter each and removing from site complete all as specified.( The distrubed surface during taking down shall be made good by the contractor without any extra cost for fixing new one of any description. No extra cost is permissble for the material and labour for making good the disturbed surface) |
| 2 | Taking down chowkhats or frames (without taking off shutters from the frame) exceeding 1.5 Square Meter but not exceeding 4 Square Meter each and removing from sitecomplete all as specified.( The distrubed surface during taking down shall be made good by the contractor without any extra cost for fixing new one of any description. No extra cost is permissible for the material and labour for making good the disturbed surface) |
| 3 | Taking down door shuttersand refixing in same opening after carryiong out alteration of any description area exc 1.00 Sqm and not exc 2.00 Sqm each complete all as specified. |
| 4 | Taking down door shutters of any description area exc 1.00 sqm and not exc 2.00 sqm. |
| 5 | Taking down door shutters of any description areanot exc 1.00 sqm |
| 6 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. |
| 7 | Brushing neat cement slurry with 3.0kg of cement per sq. metre |
| 8 | Demolition of cement concrete of any description at any floor not other wise described |
| 9 | Demolition of cement concretein ground floors and pavings n exc 15 cm thickness(below or above ground level) |
| 10 | Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed. |
| 11 | Taking up or down 15 mm bore steel tubing and connections including cleaning, threadingfor refixing or removal to store, all as directed. |
| 12 | Taking up or down 20 mm bore steel tubing and connections including cleaning, threadingfor refixing or removal to store, all as directed. |
| 13 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tile to store and rubbish off the premises. |
| 14 | PCC 1:2:4, nominal mix, type B-0, using 12.5mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, coping, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified. |
| 15 | Brick work using sub class B bricks in half brick thick walls straight or curved on plan to any radius built in CM 1 : 4. |
| 16 | M&L Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grain printed PVC sheet reinforced with MS square tube with edges painted to match wood grain sheet, supplying and fixing in opening as per specification & drawing |
| 17 | Factory made solidPVCMoulded door shutter 28 to 30mm thick (style)with particle board core & with 2,4 or 6 raised panel design with 2mm thick Moulded PVCSheet on the front face & 2mm plain Colour PVC sheet on back face , supplying&fixing in the frame at site as per specification in SSR Part-I. |
| 18 | S&F Stainless Steel barrel tower bolt of extruded section and fixed complete of Size 200 mm long complete all as specified. |
| 19 | S&F Stainless Steelhandles fabricated type, anodised150 mm long |
| 20 | S&F Stainless Steel Butt hinges, medium weight,100mm long, complete all as specified & directed. |
| 21 | S & F Glass corner self, fancy type, 250x250 and 5.5mm thick fixed with brass bracket and screwed complete all as specified and directed. |
| 22 | S&F 20 x 3mm flat iron for holdfasts. |
| 23 | M & L for cement concrete type B1, 1:2:4(20mm graded aggregate) as in bed block for securing hold fasts etc. |
| 24 | S&F pressed steel frame of size 125 x 60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate, etc complete, as specified |
| 25 | S&F pressed steel frame of size 105 x 60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate, etc complete, as specified |
| 26 | M&L PCC 1:3:6 (using 12.5 mm graded aggregate as mass concrete filling in hollow portion of the door frames |
| 27 | S&F 30mm thick, flush shutters, soild core construction, with block board core and plywood face panels commerical type both faces is covered with decorative face veneer with lipping/frame to match and complete all as specified & directed. |
| 28 | S&F 2nd class hard wood 35mm thick glazed skelton shutters, open rebated and prepared to receive glass, gauze dividedin to squares with plain, chamfered mitred and rebated sash bars, any number etc (without sash bar) complete all as specified in SSR Part I, section 8, clause 8.24(a). |
| 29 | S&F Stainless Steel door factory made box type hollow section 0.8 mm thick size for vertical and top rail 100mmx35mm, size of middle rail 150mmx35mm and bottom rail of size 200mmx35mm single rebated comprises wire gauged skeleton shutter including Stainless steel sliding door bolt(01No), SS tower bolt (02No)and SS handle (02No)complete all as specifiedand directed by Engr in Charge. Note : (a) Wire Gauge will be measured and paid separately. |
| 30 | S&F Stainless Steel works of flat iron, square bar, round barsetc as in framed work such as grill, guard bars, gratings etc incl bending, cutting and welding as necessary all as specified. |
| 31 | S&F Stainless Steel wire cloth 0.36 mm nominal dia of wire cloth and average width of aperture 1.40 mm & fixed with stainless steel wire staples, complete all as specified & directed. |
| 32 | S&FStainless Steelsliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified. |
| 33 | S & F 300mm long mild steel ordinary rat tail rod pattern springs, including roller and roller plate. |
| 34 | S&F for 150mm long floor door stopper of Stainless Steel body and tongue, with hard drawn steel spring. |
| 35 | S& F in repair Mild steel chromium plated curtain rod 19 mm dia with fixing brackets ,stops ,rollers etc, of standard thickness and of any length as directed. |
| 36 | S&F in repair kitchen cabinet & CBs shutter with frame and shelves made of solid uPVC foam profile with homogenous fine cellular structure having smooth outlet integal skin having 45mm width and 18mm thickness as vertical & horizontal stiles, joints are made and shall be fixed to walls using required size sheet metal acrew and solvent adhesive vertical and horizontal profile made of UPVC profile frame of size 35mmx17mm. The panel shall be filled with accucell polank profile of size250mm width and 6mm thick complete all as specified by manufacturer instruction and as directed. |
| 37 | Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps 30mm, complete all as specified & directed. |
| 38 | S&F 40mm dia, cupboard knobs fixed with nut,screw and washer of mild steel, bright finished |
| 39 | S&F 100 mm Hasp and staple,Stainless Steel, including bolt to hinge plate and fixed with screws |
| 40 | Mild steel magnetic catches of size 50 mm, complete all as specified and directed. |
| 41 | S & F cast brass Screw eye 10 to 12 mm internal dia and fixed |
| 42 | M&L Non skid coloured glazed ceramic tiles of any shade and any pattern of sixe (Pattern consists combination of two or more tiles )300 mm x 300 mm x 7 to 8 mm thick, as in floors etc over and including 15mm thick screed bed in CM 1:4 as in floors etc. jointed in neat cement slurry and pointed in colored cement to match coloured tiles..(The Colour,shade and pattern shall be approved by the GE during execution work). (No extra cost is allowed for Removing and re-fixing and necessary cutting of door etc if anyduring execution of work) |
| 43 | M&L for Colored glazed ceramic tiles in vertical surfaces 450 mm x 300 mm x 7 mm thickset over 10mm thick backing coat in CM 1:4 and jointed in neat cement slurry and pointed inwhite or colored cement to match . |
| 44 | M&L Non Skid digital pattern Joint less coloured tiles 7 to 8mm thick (square/ rectangular) polished, area of each tilesexceeding 0.16 sqm and n.exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed in CM 1:4 complete all as specified & directed. |
| 45 | All as per srl item 44 above, but on vertical surfaces over 10mm thick backing coat in CM 1:4 and jointed in neat cement slurry and pointed inwhite or colored cement to match . |
| 46 | S & F Machine cutkota stone slab flooring 20-25mm thick over cement screedbase 15 MM thick in CM 1: 6laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete Note : Single piece kota stone to be used for steps |
| 47 | S & FKota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid overbacking coat of CM 1:3 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, moulding and polishing complete Note : Single piece kota stone to be used for steps |
| 48 | Cutting chases, pinning through brick wallin. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth. |
| 49 | Supplying & laying CPVC pipes SDR 11 & plain CPVC SDR 11 fittings of 16 mm outer diawith all fittingslike socket, union, elbow, bend, tees etc and fixed complete to wall and ceiling or laid in floors complete all as specified and directed. |
| 50 | Supplying & laying CPVC pipes SDR 11 & plain CPVC SDR 11 fittings of20 mm outer diawith all fittingslike socket, union, elbow, bend, tees etc and fixed complete to wall and ceiling or laid in floors complete all as specified and directed. |
| 51 | S&F in repairs Angle cock fancy type chromium plated withcapstan head, screwed down, high pressure screwed both ends for 15 mm bore iron pipe or for unions and fixed complete, all as specified and directed. |
| 52 | S&F fancy type Brass CP Wall mixer with L bend for mixing hot & cold water, screwed down high pressure, screwed both ends for 15mm bore for iron pipe or for unions & fixed complete all as specified & directed. |
| 53 | S&F Brass Chromium plated hot & cold water wall mixer 2 in1 system wall unit with over head shower arrangement with hot and cold valves cast copper alloy heavy duty screwed down for iron pipe and fixed complete all as specified . |
| 54 | S&F in repairsbibtap 15mm chromium plated fancy type cast cooper alloy with crutch or butter fly handle, screwed down for iron pipe and fixed complete |
| 55 | S&F in repairs Vitreous china Orissapan of pattern, long pan size 580mmx440mm , with ‘P’ or ‘S’trap, front or back inlet and integral foot rest complete includinglime concretebedding and connection to drain or outgoing pipe and to flushing pipe, and anti siphonpipe. |
| 56 | S & F in repair vitreous china Water closet pedestal pattern with sheet cover white and flushing pipe 32mm dia for low level flushing cistern (excluding fixing bolts and flushing cistern) including Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe etc complete all as specified and directed. |
| 57 | S&F in repairs Vitreous chinawash hand basin corner type, white , flat back, size 450mmX300 mm with brackets, including cutting for and pinning in ends of brackets or erecting stand ,32 mm waste coupling and waste pipe of 75 mm longcomplete all as specified and directed. |
| 58 | M&L for High density polyethylenepipes (HDPE) 40 mm dia for working pressure rating 6 Kg/Sqcm including necessasary fittings complete fixed in repairs |
| 59 | S&F in repairs PVC flushing cistern low level 10 ltr capacity with inlet ball valve, float valve and handle including brackets and pipe connecting to WC etc including all fittings and all as specified, including dismantling old flushing cistern any type. |
| 60 | S&F PVC connection 45 cm long fitted withPTMT nut andwasher on both ends, fixed to 15 mm bore iron pipes. |
| 61 | S&F 15 mm bore brassCP basin mixer for mixing hot and cold water screwed down for iron pipes and fixed in repairs complete all as specified & directed. |
| 62 | S&F in repairs Brass chromium plated shower rose, fancy type,125mm with swivel joints including fixing topipe or union fixed, complete all as specified and directed. |
| 63 | S&F fancy type Brass CP kitchen Sink Wall mixerfor mixing hot & cold water, screwed down high pressure, screwed both ends for 15mm bore for iron pipe or for unions & fixed complete all as specified & directed. |
| 64 | S&F Chromium plated grating 100mm dia. |
| 65 | S&F PVC (SWR) floor trap , plainincluding jointing with solvent cement 75mm bore fixed in repairs. |
| 66 | S&F PVC (SWR) multi floor trapincluding jointing with solvent cement 75mm bore.fixed in repairs. |
| 67 | S&F PVC (SWR) pipes 110mmsingle socketed , in any length with rubber ringjoints ,fixed to walls /floor complete including dismantling existing pipes of any description all as specified anddirected. |
| 68 | S&F PVC (SWR) pipes 75mmsingle socketed, in any length with rubber ringjoints fixed to walls /floor complete including dismantling existing pipes all as specified anddirected. |
| 69 | S&F PVC (SWR) bends with oval access door 110mm fixed in repairs complete all as specified anddirected. |
| 70 | S&F PVC (SWR) bends with oval access door 75mm fixed in repairs complete all as specified anddirected. |
| 71 | S&F PVC (SWR) vent cowl 110mm fixed in repairs complete all as specified anddirected. |
| 72 | S&F PVC (SWR) juncton single (single T ) equal or un equal withaccess door 75 mm fixed in repairs complete all as specified anddirected. |
| 73 | S&F PVC (SWR) juncton single (single T ) equal or un equal withaccess door 110mm fixed in repairs complete all as specified anddirected. |
| 74 | S&F in repairs 600mm X 450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board of commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 75 | Providing & fixing of windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick "D" quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and backcoated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and and section for shutter should be of 48x25 mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The section are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2 Nos of heavy duty stainless steel pivot hinges shall be provided per shutter. The window should be panelled with 4mm thick plain float glass and SS mesh for fly mesh shutter (304 grade). Rubber gaskets are provided all around the glass. The above frame should be fixed to the concrete/ masonary wall by means of self expanding screws including 10mm square guard bars with 152.4mm pitch, complete for finished item of work. |
| 76 | Providing & fixing of windows for desert coolers made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick "D" quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and backcoated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and and section for shutter should be of 48x25 mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The section are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2 Nos of heavy duty stainless steel pivot hinges shall be provided per shutter. The window should be panelled with 4mm thick plain float glass and SS mesh for fly mesh shutter (304 grade). Rubber gaskets are provided all around the glass. The above frame should be fixed to the concrete/ masonary wall by means of self expanding screws including 10mm square guard bars with 152.4mm pitch, complete for finished item of work. |
| 77 | M&L 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in 15 mm thick backing coat cement mortar (1 : 4) including pointing ,mouldging the edges in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite |
| 78 | Water proofing of Sunken Slabs in following steps:- (i) The substrate to be rendered sound, free from debris by removing all weak layers and cleaned thoroughly with water. Pipe penetration through the RCC slab must be sealed using Berger HS RepairO or equivalent, around the perimeter of the pipe. (ii) Intersection of base slab with wall must be provided with a 50 mm fillet using Berger HS Latex plus or equivalent modified mortar with a bonding coat of Berger HS Latex plus or equivalent modified cement slurry. (iii) Any surface defects, such cracks, surface honeycombing depressions, etc., to be repaired as under :- (a) Any surface cracks shall be chased open into a ‘V’ groove, and filled with Berger HS Crackfill or equivalent paste – a ready to use flexible paste. (b) All depressions, unevenness, surface honeycombing to be repaired using Berger HS Latex plus or equivalent modified polymer mortar with a bonding coat of Berger HS latex plus or equivalent modified cement slurry. (iv) On the prepared concrete substrate, apply a primer coat of Berger HS Latex plus or equivalent modified cement slurry with Berger Latex plus (or equivalent) : Water at a ratio of 1:4 and required quantity of cement, after pre-wetting the substrate.(v) Dampen all surfaces immediately ahead of Berger Latex shield 2Kor equivalent application. Whilst the surface is still damp from saturation (S.S.D), apply two coats of Berger Latex shield 2K or equivalent modified waterproofing coating on the entire area over the cement sand screed. Second coat shall be applied after 6-8 hrs of application of previous coat and in the direction right angle to the previous coat. The waterproofing coating should be taken to a height of minimum 600 mm above the finished floor level on the vertical surface. (vi) Apply Glass fiber whilst the first coat is wet and then apply second coat. Note : It is essential to cure Beger HS Latex Sheild 2K or equivalent immediately after application (minimum 6-8 hrs drying ) for a minimum of 3 to 5 days to ensure full cement hydration and to minimise cracking |
| 79 | M&L for PCC (1:5:10) type F2 using 40 mm graded stone aggregate as in filling and mass concrete complete all as directed and is specified |
| 80 | M&L for cutting/drilling hole in Brick wall/RCC beam by mechanical mean exc 300mm deep in slabof WC/ Bathincluding fixing 40mm dia 450mm long GI Spoutspipeall as directed by Engr in Charge |
| 81 | Steel ventilator with top hung shutter including hinges, steel peg stay, lugs as in hold fast with locking arrangements, complete all as specified and directed. |
| 82 | M&L for PCC 1:2:4 type B0 12.5 mm stone aggregate of avg 25 mm thick make to slope in sunken floorsall as directed |
| 83 | S&F Soap dish fixed with and including chromium plated brass screws and wooden / plastic cleats complete all as specified and directed. |
| 84 | S&F in repairs Tubular towel rail, 20mm dia D type 60cm long between flanges of brass chromium plated, complete all as specified and directed. |
| 85 | Complete removal of existing roof treatment of any description viz. tar felt or membrane surface or roof tiles etc. including grubbing up of tree roots and removing all the debris to a distance n.exc 100m and preparation of concrete surfaces by scrubbing down with steel brushes and cleaning with water to remove all loose dirt / dust etc and applying the following roof treatment complete all as directed:- (a) Applying Ist course of 15 mm thick cement screed in CM 1:4 over concrete surface. (b)Applying 2nd course of bituminious primer confirming to IS-3384 @ 0.4 lit/sqm over the screed bed. (c)Applying 3rd course of a coat of binding material with blown type bitumen of grade 85/25 heating to working temperature of 180 0 C and applied @ 1.2 kg/sqm. (d) Applying 4th course of APP (Atactic polypropylene) based polymeric membrane minimum weighing 3.6 kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/sqm) laid with 75 mm side overlapand 100 mm overlap by forced / torch application as per manufactures instructions. (e) Applying 5th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to working temperature of 180 degree C and applied @ 1.2 kg/sqm over APP membrane, complete all as specified and directed. |
| 86 | PCC 1:2:4 type B-0 using (12.5 mm graded crushed stone aggregates ) in any thickness as in padding on roof slab for levelling the surface of roof slab finished fair and even, complete all as specified and directed. |
| 87 | S&F in repairs Rotational moulded polyethylene water tank (cylindrical vertical closed top) hoisted and fixed in position capacity of tank 500 ltrs and S&F 20 mm bore PTMT Ball valve high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe including dismantling of existing water tank of any description . |
| 88 | S&F Gun-metal globe or gate valves with iron handle quarter turn type, screwed both ends for iron pipe or for unions of 20mm dia bore and fixedin repairs, complete all as specified. |
| 89 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m meanradius built in CM 1:6 |
| 90 | Material & Labour for RCC chajja/fascia/parapet repair by using following steps :- (a) Removal of existing concrete along with loose damaged and cracked concrete/cover concrete from chajjas etc, exposing corroded steel reinforcements upto a depth of 10mm minimum behind the reinforcement by chipping/hacking with chisel and hammer or by mechanical means like chisel hammer, pneumatic chippers including high pressure water jetting to chipped concrete and reinforcement all as directed by Engineer-in-charge. Hard concrete shall not be removed. However if the rebar is corroded, concrete around it shall be removed. (b)Cleaning the surface of reinforcement bars from dust by using wire brushes and dry cloth and applying FOSROC Rebakleens RR- Rust Remover or equivalentusing small brush and allow to react it for 16-24 hrs. (c) Providing and applying two coats of Fosroc Nitozinc Primer - two component, zinc rich epoxy, anti-corrosive protective coating or equivalentby brushes to the exposed and cleaned rebars with an interval of 45minutes to 1 hour @ 40microns DFT / coat and allowed to completely dry for 24 hours all as directed by Engr-in-Charge.(d) Cleaning the concrete surface thoroughly once again using wire brush and applyingone liberal coat of Fosroc Nitobond EP- two component Epoxy bonding agent or equivalent to the parent concrete with brush. (e) Providing and applying 50 mm thick Renderoc SP 40 - or equivalent Polymer modified single component, alkaline resistant fibre reinforced, thixotropic, cementitious patch repair mortar after mixing of Renderoc SP 40 or equivalent with recommended qty. of water using slow speed drill fitted with mixing paddle and then applying the same to prepared surface and finishing the same with trowel carefully compacting the same around the rebars and finishing to bring it in line with existing concrete surface all as directed by Engr-in-Charge. Note : Item rate is inclusive of all materials, labour, tools and plants, scaffolding and transportation etc. complete as per specifications and as directed by Engr-in-Charge |
| 91 | Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified and directed. |
| 92 | 15 mm thick rendering in CM 1:6 on other than fair faces of brick work & finished the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 93 | M&L for rendering 5 mm thick using CM (1:3) on ceiling surfaceseven and smooth without using extra cementall as specified and as directed. |
| 94 | 15 mm thick renderingon fair faces of brick work or concrete surfaces of wallsetc 10 mm thick im CM 1:6 and 5 mm thick inCM 1:4incl water proofing compound as per manufacturers instruction & finished the surfaces even and smooth without using extra cement, complete all as specified and directed. note : WPC WILL BE MEASURED AND PAID SEPERATELY |
| 95 | Supply only WPC |
| 96 | 75 mm thick,plain cement concrete1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection etc, finishingsurface even and smooth without using extra cement including making joints with bitumastic filling in proportion of bitumen and sand 1:3 by weight complete as specified and directed. (Note : The concrete shall be laid at a stretch n.exc 3.0 m in length and every turning/ corners.) |
| 97 | M&L for applying two coats of OBD using mechanical vaccume machine including preparation of newly plastered ceiling surfaces including one coat of alkali resistant primer. |
| 98 | Complete removal of the existing treatment of any description, washing rubbing down and stopping of distempered and painted surfaces of ceiling and applying 3 mm thick wall care putty, primed with alkali resistant priming paint and two coats of oil bound distemper using mechanical vaccume machine all as specified and as directed. |
| 99 | M & L Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified & directed. |
| 100 | S&F Aluminium (Die cast) body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed |
| 101 | Complete removal of the existing treatment of any description, washing rubbing down and stopping of distempered and painted surfaces of walls and applying 3 mm thick wall care putty, primed with alkali resistant priming paint and two coats of oil bound distemper using mechanical vaccume machine all as specified and as directed. |
| 102 | M&L for applying two coats of OBD using mechanical vaccume machine including preparation of newly plastered wall surfaces including one coat of alkali resistant primer. |
| 103 | Applying two coats of synthetic enamelled paint over a coat of pink primer on wood & wood based materials of any description , not other wise described over 10 cm width or girth including preparation of new surfaces. |
| 104 | Applying two coats of synthetic enamelled paint over a coat of red oxide on steel or iron surfacebased materials of any description , not other wise described over 10 cm width or girth including preparation of new surfaces. |
| 105 | Preparation new plastered surfaces and applying two coat of external weather proof paint over one coat of primer using mechanical vaccume machine. Note : Preparation of surfaces andexternal weather proof paint to be carried out mechanically. |
| 106 | Preparation of old surfaces of wallsand applying two coats of weather proof paint using mechanical vaccume machine. Note : Preparation of surfaces and external weather proofpaint to be carried out mechanically. |
| 107 | S&F 3mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane. |
| 108 | S&F sinks made of stainless steel 1mmthickkitchenorlaboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, bowl size 410mm x 330mm x 160mm including waste coupling and waste pipe |
| 109 | Labour for drilling holes with drill machine with electric driven for gas pipe etc not exc 25 mm dia Upto 10cm depth in marble stone etc |
| 110 | Kitchen plate rack of stainless steel of size "30x31x10" inches complete all as specified and directed. Make:-Prayag cat part No-P-346 or Equivalent cat part of make as specified in Appx "F" here in after. |
| 111 | S&FGalvanised mild steel wire cloth 0.56 mm nominal dia of wire cloth and average width of aperture 1.18 mm & fixed wit tinned tank or galvanized wire staples, complete all as specified & directed. |
| 112 | M&L Precast RCC Type B1 1 : 2 : 4 (20 MM Gradedaggregate ) as inin landings, cover slabs (for man holes etc.)chullah hoods,chajjas, water troughs, mangers, shelves and similar articles with plain faces |
| 113 | Demolition of reinforced cement concrete of any description and in any positon |
| 114 | Mild steel TMT bars 6 to 8 mm diaas in reinforcement for concrete, cut to length, bent to shape required including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. |
| 115 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; |
| 116 | M & L for PCC 1:4:8 type D2 ( 40 mm graded aggregate )as in sub base to flooring 75 mm thick |
| 117 | Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m depth, for foundation etc or for shafts, manholes, etc not exc 10.00sqm on plan and not exc 1.5m depth and getting out in any type of soilcomplete all as specified and directed |
| 118 | Returning filling in, including spreading, levelling watering and well ramming in layer not exc 25 cm thickcomplete all as specified and directed. |
| 119 | Removing excavated material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5 metre above the starting point, complete all as specified and as directed. |
| 120 | Demolition and breaking up drain pipes150mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar, complete all as specified and as directed. |
| 121 | Concrete bed to drain pipes including packing under, and haunching againstthe sides of pipes after they are laid and tested; in cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate for 150mm dia bore pipes allas per SSR Part-I specifications, complete all as specified and directed. |
| 122 | Cutting into existing manholes for connecting new drains (internal dia of pipe 200mm), making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required |
| 123 | Cutting holes into or through brick walls (Superficial area Exc 150 sq. cmbut n exc 400 sq cm) built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required |
| 124 | S&F 150mm dia DWCPE(SN8) HDPE pipes laid intrencheson PCC bed incl jointing as per manufacturers instructions and as directed (Bedding/ Haunching and earthwork paidseparately under respective items of Schedule) |
| 125 | M&L for applying one coat of synthetic enamelled paint on wood & wood based materials of any description , not other wise described over 10 cm width or girth including preparation of old surfaces. |
| 126 | M&L for applying one coats of synthetic enamelled paint on steel or iron surfacebased materials of any description , not other wise described over 10 cm width or girth including preparation of old surfaces. |
| 127 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 128 | Formingholes exc. 50 cu cm but n exc 100 cu cm for balusters, newels, rag-bolts, etc. and grouting with cement mortar 1:2 after balusters, etc. are fixed, complete all as specified & directed. |
| 129 | S&F Gun-metal globe or gate valves with iron handle quarter turn type, screwed both ends for iron pipe or for unions of 15mm dia bore and fixed for washing machine, complete all as specified. |
| 130 | S&F PVC (SWR) pipes 75mmsingle socketed, in any length with rubber ringjoints fixed to walls /floor complete for disposal of waste water from washing machine all as specified anddirected. |
| 131 | S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed. |
| 132 | S&F 75mm PVC (SWR) junction double, (double T) equal or unequal with access door complete all as specified and directed. |
| 133 | S&F PVC (SWR) bends with oval access door 75mm fixedcomplete all as specified anddirected. |
| 134 | M&L for Vitrified tiles, light shade 600 x 600 x 9 to 10 mm thick, polished in floors laid over and including 15 mm thick screed bed or bedding layer of cement mortar 1:4, set and jointed in neat cement slurry and pointed inwhite cement to match the colour of tiles, all as specified. |
| 135 | M&L Vitrified tiles, light shade 600 x 600 x 9 to 10 mm thick, polished on vertical surfaces of walls including 10mm thick backing coat of cement mortar 1:4 as in dado, skirting, riser of steps etc.,set and jointed in neat cement slurry and pointed in white cement to match the colour of tiles, all as specified. |
| 136 | S&F for vitreous china wash hand basin fixed in repairs , white, flat back size 550x 400 mm fixed in repairs including HDPE waste pipe, (hole of bore 32mm) including waste coupling, brackets, etc. Make Hindware or equivalent |
| 137 | S&F Rotational moulded polyethylene water tank (cylindrical vertical closed top) hoisted and fixed in position capacity of tank 1000 ltrs and S&F 20 mm bore PTMT Ball valve high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe.including dismantling of existing water tank of any description . |
| 138 | S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed in, repair complete all as specified and directed. |
| 139 | S&F CP health faucetincluding 1-1.5m CP flexible pipe (as per requirement) for EWC fixed all as specified and completed. |
| 140 | PVC bathroom cabinet made out of ABS material of size 45cm x 60cm complete all as specified sand as directed. |
| 141 | Supply, Repair and Fixing of Single 110 mm PVC / SWRdown take pipe fixing done with Pipe Supporting Clamping System consists of Profile Bracket + Continuous Slotted C Channel + U Bolt Rubber Mounted System - 110 mm (4") Dia PVC / SWR pipe running vertically with wall distance 75 mm (3") :Pipe Support Clamping made of :1. Profile Bracket having Wall Distance 75 mm (3") made of Low Carbon Hot Roll Gauge Corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079); material size 32 mm width x 3 mm thickness with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923.2. Continuous Slotted "C" Channel with ribs to be used of size 250 mm (10") made of Low Carbon Hot Roll Gauge Corrected Oil Pickeled & Drawn (HROP D) steel (IS 1079) are Hot Dip Galvanzied+ Zn Al Flake coated with material thickness of 3mm.3. U bolt Rubber Mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 1000 hrs with noise absorbing transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns).Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit : 1. Profile Bracket Wall distance 75 mm (3") - 2 Nos. 2. Continuous Slotted C Channel of Size 250 mm (10") - 1 No.; 3. U Bolt R/M for 110 mm (4") PVC / SWR Pipe Dia. - 1 No.; and 4. Fixing Nail of thickness 6.5 mm and length 63 mm (2 1/2");Zn coated - 4 nos.Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance. Make: Shaivi or equivalent as approved by GE. |
| 142 | Supply, Repair and Fixing of Single 75 mm PVC / SWRdown take pipe fixing done with Pipe Supporting Clamping System consists of Profile Bracket + Continuous Slotted C Channel + U Bolt Rubber Mounted System - 75 mm (3") PVC /SWR pipe running vertically with wall distance 75 mm (3"):Pipe Support Clamping made of :1. Profile Bracket having Wall Distance 75 mm (3") made of Low Carbon Hot Roll Gauge Corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079); material size 32 mm width x 3 mm thickness with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923.2. Continuous Slotted "C" Channel with ribs to be used of size 250 mm (10") made of Low Carbon Hot Roll Gauge Corrected Oil Pickeled & Drawn(HROP D) steel (IS 1079) are Hot Dip Galvanzied+ Zn Al Flake coated with material thickness of 3mm.3. U bolt Rubber Mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 1000 hrs with noise absorbing transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns).Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit : 1. Profile Bracket Wall distance 75 mm (3") - 2 Nos. 2. Continuous Slotted C Channel of Size 250 mm (10") - 1 No.; 3. U Bolt R/M for 75 mm (3") PVC / SWR Pipe Dia. - 1 No.; and 4. Fixing Nail of thickness 6.5 mm and length 63 mm (2 1/2");Zn coated - 4 nos.Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance as specified. Make: Shaivi or equivalent as approved by GE. |
| 143 | Supply, Repair & Fixing of Single 110 mm Rain Water Drainage down take pipe fixing done with Pipe Support Clamping System consists of Rain Water Bracket Set with Pipe Support Channel + U Bolt R/M System for 110 mm PVC / SWR Pipe running vertically with wall distance 75 mm (3"): Pipe Support Clamping made of :1. Rain Water Bracket Set with Pipe support channel for 110 mm PVC / SWR Dia. pipe having Wall Distance 75 mm (3") made of Low Carbon Hot Roll Gauge Corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079); material size 32 mm width x 3 mm thickness with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result2000 hours. 2. U bolt Rubber Mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 1000 hrs with noise absorbing transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns).Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1.Material Qty. for one unit : 1. Rain Water Bracket Set with pipe support channel for 110 mm PVC / SWR Pipe; Wall distance 75 mm(3") - 1 Nos. ; 2. U Bolt R/M for 110 mm (4") PVC Pipe Dia. - 1 No.; and 3.Fixing Nail of thickness 6.5 mm and length 63 mm (2 1/2");Zn coated - 2 nos.Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance as specified. Make: Shaivi or equivalent as approved by GE. |
| 144 | Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner. |
| 145 | Takingout carefully copper/aluminium point wiring,Light,fan,socket or powercomplete with all fitting, fixtures such as switch socket out let, ceiling rose ,holder ,regulator,DBs etc including making good the disturbed surface of wall/floors complete |
| 146 | Taking down distribution boards/wooden board ,switch fuse units,steel enclosures for MCB of any type and removing from site all as specified and as directed by the Engineer in charge. |
| 147 | Taking down existing unserviceable submain wiring any size and making good the disturbed surface all as specified and as directed. |
| 148 | Material and labour for point wiring for one light controlled by one way switch with 1.5 Sqmm PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable 1100 Volts grade drawn through and includingrigid non metallic PVC concealed conduit (medium grade) of suitable dia along with 1.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire, connected to earth dolly and to be terminated in and includingpressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type for mounting of modular switches, sockets, fan regulators alongwith modular plate etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good disturbed surface all as specified and as directed. |
| 149 | All as per item No 149 above but for one fan point controlled by one piano switch all as specified and as directed. |
| 150 | All as per item No 149 above but One light point controlled by two way switch |
| 151 | All as per item no-149 above but for one bell point controled by one bell push all as specified and as directed. |
| 152 | All as per ser item No 149 hereinbefore but for one 3 pin socket outlet 5 Amp Same board. |
| 153 | All as per ser item No 149 hereinbefore but for one 3 pin socket outlet 5 Amp independent. |
| 154 | All as per Item no 149 here-in-before but for one15 Amp 3pin switch socket outlet, independent with 2.5 Sqmm single core multi-stranded copper conductor cable (FRLS) along with 2.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire all as specified and as directed. |
| 155 | Supply and fix modular type switch, one way 6 Amps , 1 module complete all as specified and directed. |
| 156 | Supply and fix modular type switch, Two way 6 Amps , 1 module complete all as specified and directed. |
| 157 | Supply and fix modular type switch, one way 16 Amps, 1 module complete all as specified and directed. |
| 158 | Supply and fixmodular type socket 5 pin, 6 Amps 2 module complete all as specified and directed. |
| 159 | Supply and fixmodular type socket 5 pin, 6 A/16 Amps2 module complete all as specified and directed. |
| 160 | Supply and fix in repairs of Ceiling rose surface bakelite three terminals 240 volts complete, all as specified. |
| 161 | Supply and fix in repairs Lamp holder PVC case body of Bakelite with back plate suitable for batten fittings , all as specified. |
| 162 | S&F LED Bulb cool white 10 Watt Elegant design direct fit for easy installation all as specified and directed. |
| 163 | Supply and fix in replacement of Bell push flush type piano 5 Amp complete, all as specified. |
| 164 | Supply and fix in replacement Bell multi music 230 volt ,AC single pole complete all as specified. |
| 165 | Supply and fix in replacement of Tube light fitting integrated type suitable for LED 20W indoor decorative aluminium extrudedLED batten complete with hosing with all accessories pre wired and making connection with threecore copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting complete all as specified and directed. |
| 166 | Supply and fix in replacement of Tube light fitting integrated type suitable for LED 10W indoor decorative aluminium extruded T5 LED batten complete with hosing with all accessories pre wired and making connection with threecore copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting complete all as specified and directed. |
| 167 | Supply and fix in repairs factory made epoxy powder coated Distribution board VTPN 4 ways ,415 Volts with metal door (IP-54 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 100 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cale management, top and bottom removable gland plates with Knockouts and suitable for one MCCB as incommer and SP MCBs outgoing complete all as specified and confirming to IS : 8623. |
| 168 | Supply and fix in repairs factory made epoxy powder coated Distribution board SPN 12 ways (SPN MCB DB) with metal door (IP-54 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 100 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cale management, top and bottom removable gland plates with Knockouts and suitable for one SPN/DP-MCB as incomer and SP MCBs outgoing complete all as specified and confirming to IS : 8623. |
| 169 | All as per Item No- 168 Above but 8 ways |
| 170 | All as per Item No- 168 Above but 4 ways |
| 171 | All as per Item No- 168 Above but 2 ways Single door. |
| 172 | Supply and fix in replacementMCB SP-06 to 32 Amp,10KA, 240 volts complete all as specified. |
| 173 | Supply and fix in replacement of MCB SPN 32 Amp, 240 volts 50Hz AC supply, complete all specified. |
| 174 | S&F in repair MCCB 415 Volt 25 KA 4 Pole 125 Amps all as specified and directed. |
| 175 | S&F single core PVC insulated unsheathed multistanded copper conductor cable 1 Sqmm , 1100 Volts ISI marked drawn through existing point wiring. |
| 176 | Material and labour for sub main wiring with two single core PVC insulated (unsheathed) multi strand copper conductor FRLS cable of size 4 sqmm and one single core PVC insulated (unsheathed) solid copper conductor FRLS cable of size 4 sqmm as in continuous earth wire drawn into and including concealed PVC conduit medium grade 25mm dia ISI marked complete with fittings and fixings accessories complete and including cutting chases pinning in making good to facing and pointing in using cement moter 1:3 and making good disturbed surface complete all as specified and as directed. |
| 177 | Material and labour for sub main wiring with two single core PVC insulated (unsheathed) multi strand copper conductor FRLS cable of size 6 sqmm and one single core PVC insulated (unsheathed) solid copper conductor FRLS cable of size 6 sqmm as in continuous earth wire drawn into and including concealed PVC conduit medium grade 25mm dia ISI marked complete with fittings and fixings accessories complete and including cutting chases pinning in making good to facing and pointing in using cement moter 1:3 and making good disturbed surface complete all as specified and as directed. |
| 178 | M & L in repair for earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to GI earth lead wire4 mm dia by means of bolts, nuts,check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade 15mm bore for earthing lead, wire mess, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1(using 20mm dia stone aggregate) reinforced with 6mm dia round bar @ 75mm cement concrete both always with MS handle 12mm dia and frame all as shown in electric plate No 3 in page 497 of SSR Part I (2009) and pouring extra Clay Soil of qty not less than one cubic meter into the earth pit and alsoremoval of excavated soil not less than 50 mtr from the earthing place all as specified and directed and tested on completion. including testingall as specified and directed by E-in-Charge. |
| 179 | Supply and fixing LED Bldg security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with suitable size and length of 1.5 sqmm copper conductor with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. |
| 180 | S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. |
| 181 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm, connecting electrically using 3 core 0.75 Sq mm PVC insulated flexible copper conductor cable over all sheathed all as required at site and as directed.complete all as specified and directed. |
| 182 | M&L for cutting of suitable size of holes for 300 mm exhaust fan in wall and grouting of nuts and bolts in wall and making good to match with existing wallsand Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers connecting electrically using 3 core 0.75 Sq mm PVC insulated flexible copper conductor cable over all sheathed all as required at site and as directed.complete all as specified and directed. |
| 183 | Taking down electric enerty meter single phase any size or type form the existing site and refixing the same at same place after carrying out necessary repair work in building and making the surface good to match with existing surface all as specified and directed by Engr-in-Charge. |
| 184 | Supply and fixing ceiling fans complete with blades, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) includingSupply and fix Anti Suicide Fan Rod of suitable size and length with the provn, If the load on fans exceeded 22 kgs, than the smart rod/pipe opens from its centre and spring in the pipe expands, The fan Rod should be tested at Govt of India"s MSME Labs for its functionility and the test report from Labs should be submitted to the Engr In Charge installation all as specified and directed by Engr-in-Charge. |
| 185 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, PVC connection pipes two Nos etc all as specified and directed by Engr-in-Charge . |
| 186 | Supply and fix sheet metal enclosure with single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole mcb |
| 187 | Supply and fixing 3 pin 15/16 Amp plug top suitable for 240V 50Hz AC supply.all as specified and directed. |
| 188 | Supplying and laying of CPVC pipes of dia 50 mm bore SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete fittings like socket, union, bend, elbow, tees etc all as specified. And directed. |
| 189 | Supplying and laying of CPVC pipes of dia 25 mm bore SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete fittings like socket, union, bend, elbow, tees etc all as specified. And directed. |
| 190 | Supplying and laying of CPVC pipes of dia 20 mm bore SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete fittings like socket, union, bend, elbow, tees etc all as specified. And directed. |
| 191 | S&F 50 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for CPVC pipe and fixed |
| 192 | S&F 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for CPVC pipe and fixed |
| 193 | Cutting existing 80/100/150 mm GI pipe and inserting GI Tee of size 100x100x50 mm for tapping including necessary earth work and making flange for connection of new 50 mm of GI pipe including all as specified and directed by Engr-in-Charge. |
| 194 | Excavation in trenches, n. exc1.5 m wide and n. exc 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc. 10 sq m on plan and n. exc1.5 m in depth and getting out in soft / loose soil complete all as specified and as directed. Note : All excavation for taking out and re-laying of cables shall be carried out mannualy and paid under this relevent item. |
| 195 | Removing Excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5m above from the starting point complete all as specified and as directed. (For Taking dwon Panel) |
| 196 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick with soils complete all as specified and as directed. |
| 197 | Note: The schedule of credit has been attached in tender in Pdf format and amount of credit schedule i.e. Rs 5,01,136.50shall be deducted from the total amount of BOQ to arrive at the contract sum. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
