Madhyanchal Vidut Vitran Nigam Limited has published Tender For Installation Of Distribution Transformers, Earthing, Plinth, Fencing, Line And Various Other Works Under The Business Plan 2024-25 Under Electricity Distribution Division-Iv (Mankapur), Gonda Area.. Submission Date for this Tender is 16-05-2024. Electrification Work Tenders in gonda Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 09-May-2024 | date extension | Date | 13-05-2024 |
| 2 | 14-May-2024 | ddd ext | Date | 16-05-2024 |
| Sl. No. | Item Description |
| 1 | All these below items/materials from S.N. 1.01 to 1.24 will be given and errected by the contractor on his own cost as per estimate/Resspo Norms. |
| 2 | F BRACKET |
| 3 | V typeX-ARM HOLDING CLAMP |
| 4 | GAURDING X ARM HOLDING CLAMP |
| 5 | T OFF DROPPER HOLDING CLAMP |
| 6 | LT CLAMP for I HOOK |
| 7 | TELLESSUNIT 500 Amp. With DB and Gate (4 CKT) |
| 8 | L-PIECE COPPER |
| 9 | I hook |
| 10 | SUSPENSION CLAMP |
| 11 | DEAD END CLAMP |
| 12 | DB BOX 3 PHASE |
| 13 | DB BOX CLAMP |
| 14 | STAY CLAMP |
| 15 | NUT and BOLT off size |
| 16 | PEARSING CONNECTOR |
| 17 | TRANSFORMER MOBLIE TROLLYWITH ALL FITTING as per estimate/resspo norms |
| 18 | VACCUM INTRUPTER FOR STEL MEC |
| 19 | CHARGING GEAR |
| 20 | TRIPPING COIL |
| 21 | CLOSING COIL |
| 22 | AL LUGS (1X400 SQMM) |
| 23 | JAW |
| 24 | PG CLAMP |
| 25 | Stone Pad |
| 26 | Loading, Unloading and safe cartage of the following materials (S.N. 2.01 to 2.47) from Electricity Store Centre, Gonda to the work site/dump site (Distance up to 70 km) |
| 27 | PCC POLE 8.5 MTR |
| 28 | PCC POLE 9 MTR |
| 29 | STP POLE 11 MTR |
| 30 | 25 KVA T/F |
| 31 | 63 KVA T/F |
| 32 | 100 KVA T/F |
| 33 | 250/400 KVA T/F |
| 34 | 11 KV V Type X-ARM |
| 35 | MCCB |
| 36 | RUBBUR MAT |
| 37 | CJ KIT 3X70 O/D |
| 38 | CJ KIT 3X185 O/D |
| 39 | CJ KIT 3X185 I/D |
| 40 | CJ KIT 3X300 I/D |
| 41 | CJ KIT 3X300 O/D |
| 42 | CONTROL CABLE 4X2.55 SQMM (IN MTR) |
| 43 | CONTROL CABLE 2X2.5 SQMM (IN MTR) |
| 44 | 33 KV CONTROL PANAL |
| 45 | BATTARY SET 24V |
| 46 | BATTARY CHARGER 24V |
| 47 | LIGHTING ARRESTOR |
| 48 | 33 KV CT |
| 49 | 33 KV VCB |
| 50 | GARUDING X-ARM |
| 51 | T OFF CHANNEL |
| 52 | DROPPER ANGLE |
| 53 | TOP CHANNEL |
| 54 | SS BASS |
| 55 | 11 PIN INSULATOR |
| 56 | 11 DISK INSULATOR |
| 57 | ACSR WEASEL CONDUCTOR |
| 58 | LT XLPE Cable Al. 1X240 sq.mm |
| 59 | LT XLPE Cable Al. 1X400 sq.mm |
| 60 | LT XLPE Cable1X630 sq.mm |
| 61 | XLPE Cable Al. 3X70 sq.mm |
| 62 | XLPE 3X185 |
| 63 | XLPE 3X300 |
| 64 | ABC 1X25+1X16 |
| 65 | ABC 3X50 |
| 66 | ABC 3X95 |
| 67 | STAY SET |
| 68 | GI WIRE 6 SWG |
| 69 | STAY WIRE 7/10 SWG |
| 70 | STAY INSULATOR |
| 71 | EARTHING COMPLETE |
| 72 | EARTHING ROAD |
| 73 | Other Material |
| 74 | Erection of single PCC/ST Poles (8.5/9/11 Mtr Long) for 11 KV/L.T. line alongwith fitting of all accessories on pole including dragging of pole from Dump Site to pit site (All decentralize material shall be given by the contractor on his own cost.) |
| 75 | Erection of sectional double pole sectional PCC/STP pole (8.5/9/11 mtr long) alongwith fitting of all accessories on pole including dragging of pole from Dump Site to pit site. (All decentralize material shall be given by the contractor on his own cost.) |
| 76 | Earthing with complete fitting |
| 77 | Erection and Grouting of stay sets alongwith complete fittings. Cement, Sand & Brick ballast provided by the contractor at his own cost. |
| 78 | Grouting of Poles with 1:4:8CC ratio of cement, sand & brick ballast, backfilling of pits with mud completely.All required materials provided by the contractor at his own cost. |
| 79 | Laying, stringing, sagging & binding of conductors of 11 KV in 3 phase, 3 wire line with jumpering (where as required) |
| 80 | Construction of 11/0.4 KV S/S for following capacity of T/F with mounting and fitting of T/F on plinth/double pole with proper fitting of all acessories and connecting with all circuit including earthing of T/F fitting with all accessories. |
| 81 | 25 KVA T/F |
| 82 | 63 KVA T/F |
| 83 | 100 KVA T/F |
| 84 | 250/400 KVA T/F |
| 85 | Laying, Stringing & Sagging of ABC Cable up to proper sag for the following size cable as per estimate/resspo norms |
| 86 | ABC 1X25+1X16 |
| 87 | ABC 3X50 |
| 88 | ABC 3X95 |
| 89 | Laying Stringing sagging & Binding of All size XLPE cable wher is required as per estimate/Resspo norms. |
| 90 | LT XLPE Cable Al. 1X240 sq.mm |
| 91 | LT XLPE Cable Al. 1X400 sq.mm |
| 92 | LT XLPE Cable1X630 sq.mm |
| 93 | XLPE Cable Al. 3X70 sq.mm |
| 94 | XLPE 3X185 |
| 95 | XLPE 3X300 |
| 96 | Installtion/Errection/Laying/stringing of the following items as per estimate/resspo norms. |
| 97 | Diffent size Controll Cable |
| 98 | 33/11 KV different size Jointing kit |
| 99 | 33 KV CONTROL PANAL |
| 100 | BATTARY SET 24V |
| 101 | BATTARY CHARGER 24V |
| 102 | LIGHTING ARRESTOR |
| 103 | 33 KV CT |
| 104 | 33 KV VCB |
| 105 | 11 PIN INSULATOR |
| 106 | 11 DISK INSULATOR |
| 107 | TELLESSUNIT 500 Amp. With DB and Gate (4 CKT) |
| 108 | DB BOX 3 PHASE WITH COMPLETE FITTING |
| 109 | VACCUM INTRUPTER FOR STEL MEC |
| 110 | CHARGING GEAR |
| 111 | TRIPPING COIL |
| 112 | CLOSING COIL |
| 113 | AL LUGS (1X400 SQMM) |
| 114 | JAW |
| 115 | PG CLAMP |
| 116 | MCCB |
| 117 | RUBBUR MAT |
| 118 | Gaurding of H.T./L.T. line with complete fittings as per estimate/resspo norms (All the decentralize material shall be given by the contractor) |
| 119 | Boaring/Chemical type Pipe Earthing(with G.I. strip connection) as per Estimate/Resspo Norms. (All the required materialshall be given by contractor on his own cost.) |
| 120 | Repairing of Plinth including dismounting/disconnection of T/F from system as well as mounting/reconnection to the system after repairing as per Estimate/Resspo Norms .(All the required materialshall be given by contractor on his own cost.) |
| 121 | Wiremesh fencing with 1 door arrangement including grouting of footings and proper fxing as per Estimate/Resspo Norms. (All the required materialshall be given by contractor on his own cost.) |
| 122 | CONSTRUCTION OF PLINTH WITH FENCING with gate as per Estimate/Resspo Norms. (All the required materialshall be given by contractor on his own cost.) |
| 123 | Cutting of tree branches for cleaning route of 11 KV/LT line at the work site (25 mtr.= 1 Job) |
| 124 | Carrage of scrap/conductor from site to store |
| 125 | Dismentaling old material |
| 126 | Dismentaling old line |
| 127 | COSTRUCTION OF TRENCH OF SIZE 0.45X0.75 (IN MTR) |
| 128 | Constructio of Structure/Plinth for VCB as per estimate/Resspo Norms. (All the required materialshall be given by contractor on his own cost.) |
| 129 | Construction of CT STRUCTURE AND PLINTHas per estimate/Resspo Norms. (All the required materialshall be given by contractor on his own cost.) |
| 130 | Consstruction of LA STRUCTURE AND PLINTHas per estimate/Resspo Norms. (All the required materialshall be given by contractor on his own cost.) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
