|
| 1 | Narmada water storage and supply arrangement for Quarter No.C-2 & C-3 , Narmada Sadan Campus, Scheme No. 74 - C, Vijay Nagar, Indore |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. All kinds of soil |
| 3 | Supplying and stacking at site :Moorum |
| 4 | Providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - All work up to plinthlevel :1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal sizederived from natural sources) |
| 5 | Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) : with FPS (non modular ) bricks |
| 6 | Plastering 12 mm cement plaster of mix 1:4 (1 Cement :4 Sand) |
| 7 | Finishing walls with water proofing cement paint of required shade ,New work ( Twoor more coats applied @ 3.84 lit/10 sqm) |
| 8 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. cum |
| 9 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge: 20 mm nominal dia Pipes |
| 10 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :20 mm nominal bore |
| 11 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 12 | Providing & Fixing of Iron cover of size 2.10 x 2.10 m andmade of 1 mm thick M.S. sheet, iron angle of section 35 x35 x5 mmwithall fitting & fixtures etc complete and as directed by Engineer in charge. |
| 13 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using primmer as per manufecture specifications :- Painting steel work with Deluxe multi surface paint to give an even shade. Two or more coat of primer applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture. |
| 14 | Providing & fixing open well pump 1HP for lifting of water from ground to terrace including all electrical fitting & fixtures complete as per direction ofEngineer in Charge. |
