|
| 1 | List of item(s) / work(s) as per tender documents |
| 2 | SHAFT; EN8 ; 6/5 SK |
| 3 | PUMP CASING,P/N:2,6 / 5 SK,MATHER+PLATT |
| 4 | BACK PLATE,P/N:4,6 / 5 SK,MATHER+PLATT |
| 5 | LOGGING RING,P/N:7,6 / 5 SK,MATHER+PLATT |
| 6 | SLEEVE ; SS410 ; 6/5 SK |
| 7 | GLAND,P/N:9,6 / 5 SK,MATHER+PLATT |
| 8 | WATER THROWER (RUBBER),P/N:11,6 / 5 SK |
| 9 | V-SEAL,V55,RUBBER,M&P |
| 10 | V-SEAL,V70,RUBBER,6/5 SK,M&P |
| 11 | BEARING PEDESTAL(HOUSING),P/N:17 |
| 12 | THRUST BRG COVER,P/N:22,6/5 SK |
| 13 | THRUST SLEEVE (GREASE),P/N:21,6/5 SK |
| 14 | BRG. DISTANCE SLEEVE.(INNER),P/N:20 |
| 15 | IMPELLAR NOSE CAP,P/N:27,6/5 SK |
| 16 | IMPELLER SECURING SCREW,P/N:28 |
| 17 | SHAFT,SS 410,P/N:1800 |
| 18 | SHAFT SS410 |
| 19 | TOP & BOTTOM CASING P/N: 1001 & 1002 |
| 20 | INTERSATGE RING018A |
| 21 | GLAND (SPLIT) C.I.,P/N:026,150/200 GST |
| 22 | TOP&BOTTOM CASING P/N: 29&30 150/200GST |
| 23 | SLEEVE ( NON-DRIVING END )065 |
| 24 | SLEEVE (DRIVING END)063 |
| 25 | SLEEVE NUT, L.H.066A |
| 26 | SLEEVE NUT, R.H066 |
| 27 | THRUST COLLER,P/N:248,150/200 GST |
| 28 | BEARING DISTANCE SLEEVE,P/N:667,150/200 |
| 29 | BEARING HOUSING,P/N:008,PNISO-16,MATHER |
| 30 | BACK COVER,P/N:11,PNISO-16,MATHER & PLAT |
| 31 | GLAND,P/N:26,PNISO-16,MATHER & PLATT |
| 32 | CASING P/N 29, PNISO-16, MATHER & PLATT |
| 33 | Shaft with Key;MOC- SS 316 |
| 34 | BEARING END COVER,P/N:363,PNISO-16,MATHE |
| 35 | OIL THROWER,P/N:477,PNISO-16,MATHER & |
| 36 | BEARING HOUSING,P/N:008,ET ISO 7,MATHER |
| 37 | BACK COVER,P/N:11,ET ISO 7,MATHER & PL |
| 38 | GLAND,P/N:26,ET ISO 7,MATHER & PLATT |
| 39 | CASING,P/N:29,ET ISO 7,MATHER & PLATT |
| 40 | BEARING END COVER,P/N:363,ET ISO 7,MATHE |
| 41 | DEFLECTOR,P/N:729,ET ISO 7,MATHER & PLAT |
| 42 | IMPELLER, P/N 031, CF8M |
| 43 | CASING, P/N029, CF8M |
| 44 | WATER DEFLECTOR, P/N 729, EN8 |
| 45 | Impeller(Dia.210mm) MOC CS-WCB |
| 46 | Shft with key; MOC EN8 |
| 47 | Shaft Sleeve(Hard) MOC SS-410 |
| 48 | GLAND,8/10 DME,M&P |
| 49 | BEARING END COVER,P/N 2754 |
| 50 | BEARING END CVR,P/N 2751 |
| 51 | BEARING HOUSING,C.I,P/N 2761 |
| 52 | COWL NUT (L.H) SS410,P/N 3001 |
| 53 | COWL NUT (R.H),P/N 3002 |
| 54 | SLEEVE NUT (L.H),P/N 3031 |
| 55 | SLEEVE NUT (R.H),P/N 3032 |
| 56 | BEARING BUSH P/N:2700 3/4 HS PLURO |
| 57 | CASE WEAR RINGS P/N 1181 |
| 58 | INTERSTAGE BUSHES P/N 1102 |
| 59 | WATER DEFLECTOR,P/N:2070,12 X 14 CME |
| 60 | BRG END COVER (NDE),P/N 2754,12X14CME |
| 61 | BRG END COVER (DE),P/N:2751,12X14CME |
| 62 | BEARING HOUSING NDE,P/N 2764,12X14 CME |
| 63 | BEARING HOUSING,P/N:8,PN ISO 7,MATHER |
| 64 | BACK COVER,P/N:11,PN ISO 7,MATHER & PLAT |
| 65 | GLAND,P/N:26,PN ISO 7,MATHER & PLATT |
| 66 | CASING,P/N:29,PN ISO 7,MATHER & PLATT |
| 67 | LOGGING RING,P/N:44,PNISO 7,MATHER |
| 68 | SHFT W/KEYS,P/N-049,SS316,PN ISO 7,M&P |
| 69 | BEARING END COVER, P/N 363, PN ISO 7 |
| 70 | IMPELLER NUT,P/N:442,PN ISO 7,MATHER |
| 71 | OIL THROWER,P/N:477,PN ISO 7,MATHER |
| 72 | WATER DEFLECTOR,P/N:729,PN ISO 7 |
| 73 | O-RING, P/N 775, PN ISO7, MATHER & PLATT |
| 74 | O-RING,P/N:775-1,PN ISO 7,MATHER & PLATT |
| 75 | BEARING HOUSING,P/N:8,ET ISO-16,MATHER |
| 76 | BACK COVER,P/N:11,ET ISO-16,MATHER & PL |
| 77 | GLAND,P/N:26,ET ISO-16,MATHAR & PLATT |
| 78 | CASING,P/N:29,ET ISO-16,MATHAR & PLAT |
| 79 | BEARING END COVER,P/N:363,ET ISO-16 |
| 80 | IMPELLER NUT,P/N:442,ET ISO-16,MATHER |
| 81 | WATER DEFLECTOR, P/N 729, ET ISO-16 |
| 82 | IMPELLER NUT,P/N:442,PNISO-19,MATHER&PLA |
| 83 | BRG HOUSING,P/N:008,PNISO-19,MATHER&PLAT |
| 84 | BRNG END CVR,P/N:363,PNISO-19,MATHER&PLA |
| 85 | BACK COVER,P/N:11,PNISO-19,MATHER&PLATT |
| 86 | CASING,P/N:29,PNISO-19,MATHER&PLATT |
| 87 | CASING,P/N:29,ET ISO NO 15,MATHER&PLATT |
| 88 | BACK COVER,P/N:11,ET ISO NO 15,MATHER |
| 89 | GLAND,P/N:26,ET ISO NO 15,MATHER & PLATT |
| 90 | WEAR PLATE,P/N:32,ET ISO NO 15,MATHER |
| 91 | Shaft with Key; MOC- EN8 |
| 92 | BACK PULLOUT ASMBLY ET ISO NO 15,P/N-A |
| 93 | IMPELLER,P/N:31, ET ISO NO 15, MATHER |
