Public Health Engineering Department-PHED has published Tender For Annual Framework/Rate Contract Of Mechanical Works At All Stations Of City Left Sub-Division Jal Shakti (Phe) Mechanical Division Srinagar. Submission Date for this Tender is 21-05-2024. Mechanical engineering Service Tenders in Srinagar Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| 2a7f4ffb-62b0-44a7-8536-373439d6933c.html | Tender Notice | 0 KB |
| BOQ_724205.xls | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Carriage:Mechanical transportation, loading, unloading and handling of various items such as pump parts, motors, starters, voltage stabilizers, coil assemblies, welding tools & plant, etc. using appropriate means of transport as under: |
| 2 | Private car, auto-rickshaw or similar with 1.0 km lead |
| 3 | Extra per kilometer for lead >1.0 kms upto 5.0 kms |
| 4 | Extra per kilometer for lead >5.0 kms upto 10.0 kms |
| 5 | Extra per kilometer for lead >10.0 kms upto 20.0 kms |
| 6 | Extra per kilometer for lead >20.0 kms upto 30.0 kms |
| 7 | Load carrier auto, mini van or similar with 1.0 km lead |
| 8 | Extra per kilometer for lead >1.0 kms upto 5.0 kms |
| 9 | Extra per kilometer for lead >5.0 kms upto 10.0 kms |
| 10 | Extra per kilometer for lead >10.0 kms upto 20.0 kms |
| 11 | Extra per kilometer for lead >20.0 kms upto 30.0 kms |
| 12 | Mini truck like Tata mobile, Bolero Camper or similar with 1.0 km lead |
| 13 | Extra per kilometer for lead >1.0 kms upto 5.0 kms |
| 14 | Extra per kilometer for lead >5.0 kms upto 10.0 kms |
| 15 | Extra per kilometer for lead >10.0 kms upto 20.0 kms |
| 16 | Extra per kilometer for lead >20.0 kms upto 30.0 kms |
| 17 | Truck, tipper or similar with 1.0 km lead |
| 18 | Extra per kilometer for lead >1.0 kms upto 5.0 kms |
| 19 | Extra per kilometer for lead >5.0 kms upto 10.0 kms |
| 20 | Extra per kilometer for lead >10.0 kms upto 20.0 kms |
| 21 | Extra per kilometer for lead >20.0 kms upto 30.0 kms |
| 22 | Head load carriage of machinery/ equipment at locations inaccessible by vehicles on plain/ rough terrain |
| 23 | Upto 50 kgs load |
| 24 | Extra for every additional 50kgs load (Note: Fraction >=25kgs shall be taken as equivalent to next load of 50kgs) |
| 25 | Extra for uphill terrain (Ground Slope >= 07 deg) |
| 26 | Dismantling and Assembling |
| 27 | PUMPS |
| 28 | Complete dismantling of VT pump by way of: Disconnecting all leads from the motor and marking the terminals, uncoupling of motor from the pump, dismounting of motor with stool. Disassembling, dismantling and segregation of various pump parts such as discharge and column pipes, shafts and couplings, bowl, suction bell, impeller, stuffing box, fasteners, etc. |
| 29 | Single stage pumps with single column pipe upto 300mm ND |
| 30 | Single stage pumps with single column pipe > 300mm upto 600mm ND |
| 31 | Single stage pumps with single column pipe > 600mm ND |
| 32 | Extra per additional stage over corresponding column pipe size rates above |
| 33 | Extra per additional column pipe over corresponding column pipe size rates above |
| 34 | Complete assembling of all VT pump parts after cleaning, coupling and alignment with motor, connecting of motor leads and testing on full load. |
| 35 | Single stage pumps with single column pipe upto 300mm ND |
| 36 | Single stage pumps with single column pipe > 300mm upto 600mm ND |
| 37 | Single stage pumps with single column pipe > 600mm ND |
| 38 | Extra per additional stage over corresponding column pipe size rates above |
| 39 | Extra per additional column pipe over corresponding column pipe size rates above |
| 40 | Complete dismantling of single stage horizontal pump (all types) by way of: Disconnecting all leads from the motor and marking the terminals, uncoupling of motor from the pump. Disassembling, dismantling and segregation of various pump parts such as shaft and sleeves, impeller, gland, fasteners, etc. |
| 41 | Suction size upto 200mm |
| 42 | Suction size > 200mm upto 400mm |
| 43 | Suction size > 400mm |
| 44 | Extra per additional stage over corresponding suction sizes above |
| 45 | Complete assembling of single stage horizontal pump (all types) after cleaning of all parts throughly with petrol, coupling and alignment with motor, connecting of motor leads and testing on full load. |
| 46 | Suction size upto 200mm |
| 47 | Suction size > 200mm upto 400mm |
| 48 | Suction size > 400mm |
| 49 | Extra per additional stage over corresponding suction sizes above |
| 50 | Partial dismantling of VT pump by way of: Disconnecting all leads from the motor and marking the terminals, uncoupling of motor from the pump, dismounting of motor with stool. Disassembling, dismantling and segregation of various pump parts including discharge and column pipe, head and line shafts and couplings but excluding bowl assembly. |
| 51 | Pumps with single column pipe upto 300mm ND |
| 52 | Pumps with single column pipe > 300mm upto 600mm ND |
| 53 | Pumps with single column pipe > 600mm ND |
| 54 | Extra per additional column pipe over corresponding column pipe size rates above |
| 55 | Assembling of dismantled VT pump parts (excluding bowl assembly) after cleaning, coupling and alignment with motor, connecting of motor leads and testing on full load. |
| 56 | Pumps with single column pipe upto 300mm ND |
| 57 | Pumps with single column pipe > 300mm upto 600mm ND |
| 58 | Pumps with single column pipe > 600mm ND |
| 59 | Extra per additional column pipe over corresponding column pipe size rates above |
| 60 | Removal of only stuffing box from the pump. |
| 61 | Fitting of only stuffing box to the pump. |
| 62 | Replacement of Driving End (DE) bearing of horizontal/ vertical pump by way of: Uncoupling of motor from the pump, isolating of DE bearing. Carefully extracting the old damaged bearing from the housing with the help of bearing puller, etc and fitting of new bearing in its place. Refitting back of pump parts, coupling and alignment with the pump. The job includes load testing of pump. |
| 63 | Suction size upto 200mm |
| 64 | Suction size > 200mm upto 400mm |
| 65 | Suction size > 400mm |
| 66 | Replacement of Non-Driving End (NDE) bearing of horizontal pump by way of: Opening the end cover of NDE bearing housing. Carefully extracting the old damaged bearing from the housing with the help of bearing puller, etc and fitting of new bearing in its place. Refitting back of pump parts, coupling and alignment with the pump. The job includes load testing of pump. |
| 67 | Suction size upto 200mm |
| 68 | Suction size > 200mm upto 400mm |
| 69 | Suction size > 400mm |
| 70 | Extraction of submersible pump/motor set along with column pipes from the well by hoisting with tripod and chain pulley block and by using tools and tackles required for extraction of pump set and uncoupling the pump and motor |
| 71 | Column pipes upto 100mm NB and 50mtr depth |
| 72 | For depths exceeding 50m |
| 73 | Extra over corresponding depth level for pipes >100mm NB |
| 74 | Assembling of submersible pump/ motor set and lowering along with column pipes in the well by chain pulley block, tripod, tools and tackles and testing on full load at site. |
| 75 | Column pipes upto 100mm NB and 50mtr depth |
| 76 | For depths exceeding 50m |
| 77 | Extra over corresponding depth level for pipes >100mm ND |
| 78 | MOTORS |
| 79 | Disconnecting of all motor leads, dismantling of motor, draining off the m.oil (if applicable) and collection in suitable pan, taking out the rotor from the stator, and complete disassembly as per requirement of job: |
| 80 | upto 10 HP |
| 81 | >10HP upto 60 HP |
| 82 | >60 upto 200 HP |
| 83 | >200 HP upto 350 HP |
| 84 | Assembling of all motor parts, refilling of drained out m.oil (if applicable), coupling and alignment with pump, reconnecting of leads and testing on full load. |
| 85 | upto 10 HP |
| 86 | >10HP upto 60 HP |
| 87 | >60 upto 200 HP |
| 88 | >200 HP upto 350 HP |
| 89 | Replacement of Non Reverse Ratchet on Driving End (DE) of Vertical electric motor by way of: Disconnecting all leads from motor and marking the terminals, uncoupling and dismounting of motor from the motor stool. Removal of non reverse ratchet plate/ seal plate/ ratchet pins, etc as per requirement and refitting after necessary repairs/ replacements. Refitting of motor, coupling and alignment with the pump. The job includes testing of motor on load. |
| 90 | Replacement of Non Reverse Ratchet on Non Driving End (NDE) of Vertical electric motor by way of: Isolating the motor, dismantling of top end cover of the motor, removing of non reverse ratchet plate/ seal plate/ ratchet pins, etc as per requirement and refitting back of parts after necessary repairs/ replacements and testing of motor on load. |
| 91 | Replacement of Driving End (DE) bearing of Vertical electric motor by way of: Disconnecting all leads from motor and marking the terminals, uncoupling of motor from the pump, dismounting of motor from the motor stool. Opening the bottom end cover of DE bearing housing. Carefully extracting the old damaged bearing from the housing with the help of bearing puller, etc and fitting of new bearing in its place. Refitting back of motor parts, coupling and alignment with the pump. The job includes testing of motor on load. |
| 92 | upto 60 HP rating |
| 93 | >60 upto 200 HP |
| 94 | >200 HP upto 350 HP |
| 95 | Replacement of Non Driving End (NDE) bearing of Vertical electric motor by way of: Disconnecting all leads from motor and marking of terminals, dismantling of top end cover of the motor & removal of non-reverse ratchet assembly. Draining off the m.oil and collection in a suitable pan (if applicable), extraction of old damaged bearing from the motor, fitting of new NDE bearing and refilling of old m.oil. The job includes load testing of motor. |
| 96 | upto 60 HP rating |
| 97 | >60 upto 200 HP |
| 98 | >200 HP upto 350 HP |
| 99 | Replacement of Driving End (DE) bearing of horizontal electric motor by way of: Disconnecting all leads from motor and marking the terminals, uncoupling of motor from the pump. Opening the end cover of DE bearing housing. Carefully extracting the old damaged bearing from the housing with the help of bearing puller, etc and fitting of new bearing in its place. Refitting back of motor parts, coupling and alignment with the pump. The job includes testing of motor on load. |
| 100 | upto 60 HP rating |
| 101 | >60 upto 200 HP |
| 102 | >200 HP upto 350 HP |
| 103 | Replacement of Non-Driving End (NDE) bearing of horizontal electric motor by way of: Disconnecting all leads from motor and marking the terminals, uncoupling of motor from the pump. Opening the end cover of NDE bearing housing. Carefully extracting the old damaged bearing from the housing with the help of bearing puller, etc and fitting of new bearing in its place. Refitting back of motor parts, coupling and alignment with the pump. The job includes testing of motor on load. |
| 104 | upto 60 HP rating |
| 105 | >60 upto 200 HP |
| 106 | >200 HP upto 350 HP |
| 107 | Rectification of Leakage |
| 108 | Carriage charges on account of transportation of all the equipment to the working site, required for carrying out the weldingjob and shifting back the same. |
| 109 | Hiring of diesel/kerosene/petrol runningDG Setfor one day for running the welding machine(08 Hours of shift). |
| 110 | Operation charges of DG SET for welding machine for first one hour. The job includes hiring of labour for operating the DG set, the labour should be well versed for operating the DG set. |
| 111 | Operation charges of DG Set from 2nd hour for each passing hour upto seven hours including labour. |
| 112 | Hiring of diesel/kerosene/petrol running dewatering pumpSetfor one day (08 Hours of shift) |
| 113 | Operation chargesDewatering pump for first one hour including labour. The job includes hiring of labour for operating the Dewatering pump, the labour should be well versed for operating the Dewatering pump. |
| 114 | Operation charges from 2nd hour for each passing hour upto seven hours including labour. |
| 115 | Hiring of welding set, portable angle grinder/ Oxy acetyline gas cutterfor one day (08 Hours of shift) including welder, helper and consumables like electrodes, cutting blades for rectification of leckageofupto 600 mmDia MS Rising main by way ofusing an availableelectric arc welding machineto achieve a leak proof welding joint etc. The job includes fitting of 8 mm thick MS plate (exclding cost of MS Plate) by way of welding |
| 116 | Providing of 8 mm thickMSplate to be used for carrying out the welding job where ever required |
| 117 | Hiring of excavaor fo 2 hr for excavation including fuel chargs |
| 118 | Hiring and operational charges of excavatorperHours (including fuel charges) for excavationand back filling. |
| 119 | Supplying, stacking and filling (manual filling) Stone dust (Including royalty) by mechanical transport upto a lead of 15 km |
| 120 | Bearings |
| 121 | Providing and fitting of new bearing as under:(skf/fag/equivalent) |
| 122 | 6321 (Brg) |
| 123 | 29330 (Brg) |
| 124 | 29416 (Brg) |
| 125 | 16026 (Brg) |
| 126 | 6020 (Brg) |
| 127 | 16026 (Brg) |
| 128 | 7319 BEP |
| 129 | 6319 (Brg) |
| 130 | NU 319ECP |
| 131 | 6303/C3 |
| 132 | 6304/C3 |
| 133 | 6305/C3 |
| 134 | 6206/c3 |
| 135 | 6306/C3 |
| 136 | 6307/C3 |
| 137 | 6208z |
| 138 | 6308z |
| 139 | CONSUMABLES |
| 140 | Providing andGreasing of AP3 Grease (all purpose type) (Preferred makes: HPCL/ Indian oil/ BPCL/ Castrol/ Caltex) |
| 141 | Providing and filling of mineral oil for bearing lubrication (Preferred make: Indian Oil Servo/ HPCL/ BPCL Mak/ Shell Mobil) |
| 142 | Providing and fitting of graphited natural fibre packing for pumps, etc. (Preferred make: Champion Style-3116 or equivalent) |
| 143 | Providing and fitting ofMS nuts, bolts and washers of assorted sizes |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
