Public Health Engineering Department-PHED has published Tender For Annual Maintenance Framework Contract Of Electrical Works At Various Lift Stations Of Phe Mechanical City Right Sub-Division. Submission Date for this Tender is 21-05-2024. Electrical Maintenance Tenders in Srinagar Jammu And Kashmir. Bidders can get complete Tender details and download the document.
FileName | File Description | File Size |
66f7ed4a-bd8d-4561-9322-dc0b84c761bc.html | Tender Notice | 0 KB |
BOQ_724211.xls | Tender Document | 0 KB |
Scrap-Schedule.pdf | Tender Document | 0 KB |
Tendernotice_1.pdf | Tender Document | 0 KB |
Sl. No. | Item Description |
1 | Carriage |
2 | Mechanical transportation, loading, unloading and handling of various items such as pump parts, motors, starters, voltage stabilizers, coil assemblies, welding tools & plant, etc. using appropriate means of transport as under: |
3 | Private car, auto-rickshaw or similar with 1.0 km lead |
4 | Extra per kilometer for lead >1.0 kms upto 5.0 kms |
5 | Extra per kilometer for lead >5.0 kms upto 10.0 kms |
6 | Extra per kilometer for lead >10.0 kms upto 20.0 kms |
7 | Extra per kilometer for lead >20.0 kms upto 30.0 kms |
8 | Load carrier auto, minivan or similar with 1.0 km lead |
9 | Extra per kilometer for lead >1.0 kms upto 5.0 kms |
10 | Extra per kilometer for lead >5.0 kms upto 10.0 kms |
11 | Extra per kilometer for lead >10.0 kms upto 20.0 kms |
12 | Extra per kilometer for lead >20.0 kms upto 30.0 kms |
13 | Mini truck like Tata mobile, Bolero Camper or similar with 1.0 km lead |
14 | Extra per kilometer for lead >1.0 kms upto 5.0 kms |
15 | Extra per kilometer for lead >5.0 kms upto 10.0 kms |
16 | Extra per kilometer for lead >10.0 kms upto 20.0 kms |
17 | Extra per kilometer for lead >20.0 kms upto 30.0 kms |
18 | Truck, tipper or similar with 1.0 km lead |
19 | Extra per kilometer for lead >1.0 kms upto 5.0 kms |
20 | Extra per kilometer for lead >5.0 kms upto 10.0 kms |
21 | Extra per kilometer for lead >10.0 kms upto 20.0 kms |
22 | Extra per kilometer for lead >20.0 kms upto 30.0 kms |
23 | Head load carriage of machinery/ equipment at locations inaccessible by vehicles on plain/ rough terrain |
24 | Upto 50 kgs load |
25 | Extra for every additional 50kgs load (Note: Fraction >=25kgs shall be taken as equivalent to next load of 50kgs) |
26 | Extra for uphill terrain (Ground Slope >= 07 deg) |
27 | Dismantling and Assembling |
28 | VOLTAGE STABILIZERS |
29 | Dismantling of 415V 3-ph Voltage Stabilizer by way of opening of top lid, disassembling of voltage regulator, removing of all incoming and outgoing connections, taking out of damaged copper legs after removal of core, etc. The job includes draining out of T. Oil and its safe placement for further refilling. |
30 | upto 50 kVA |
31 | >50 upto 100kVA |
32 | >100kVA upto 250 kVA |
33 | greater than 250 kVA |
34 | Assembling of all parts of 3-ph Voltage Stabilizer, connecting of leads of all incoming and outgoing connections and refilling of old drained out of T. Oil |
35 | upto 50 kVA |
36 | >50 upto 100kVA |
37 | >100kVA upto 250 kVA |
38 | greater than 250 kVA |
39 | TRANSFORMER |
40 | Dismantling of 33/0.4 kv or 11/0.4kV /33/11Kv transformer by way of disconnecting of all HT and LT connections, opening of top lid, draining out of T. Oil and its safe placement for further refilling, taking out of coils after removal of core assembly, etc. Job also includes detaching of core HV/LV coils. |
41 | upto 50 kVA |
42 | >50 upto 100kVA |
43 | >100kVA upto 250 kVA |
44 | greater than 250 kVA upto 630kVA |
45 | Greater than 630 kVA upto 1MVA |
46 | Greater than 1.0 MVA upto 2.0MVA |
47 | Greater than 2.0 MVA upto 4.0MVA |
48 | Complete assembling of 33/0.4 kv or 11/0.4kV/33/11Kv transformer after cleaning of tank, fitting of coil assembly in the tank. Job further includes closing of the transformer lid by way of fitting of existing nuts/bolts and gaskets, insulators, etc. Refilling of t.oil upto required level in tank. Reconnecting of HT/ LT connections and testing. |
49 | upto 50 kVA |
50 | >50 upto 100kVA |
51 | >100kVA upto 250 kVA |
52 | greater than 250 kVA upto 630kVA |
53 | Greater than 630 kVA upto 1MVA |
54 | Greater than 1.0 MVA upto 2.0MVA |
55 | Greater than 2.0 MVA upto 4.0MVA |
56 | STARTER |
57 | Isolating and disconnecting of all incoming and outgoing leads from Soft starter. Taking out the damaged soft starter components. |
58 | upto 60 HP rating |
59 | >60 upto 200 HP |
60 | >200 HP |
61 | HT PANELS |
62 | Disconnecting of all incoming and outgoing leads from HT panel, opening of all nuts, bolts and isolating the cubibal HT panel unit from the system. The job includes dismantling of various buses,relays, VCB,meters, CTs, Pts etc |
63 | 800Amp VCB |
64 | 1230Amp VCB |
65 | Assembling the above panel parts viz various buses,relays, VCB,meters, CTs, Pts etc, fitting back at its position, connecting of all incoming and outgoing leads from HT panel with the system following all SOP"s including testing all testing etc |
66 | 800Amp VCB |
67 | 1230Amp VCB |
68 | Electrical Works |
69 | MOTORS |
70 | Complete winding of stator coils of 3-phase LV horizontal/ submersible motor/ autotransformer/ voltage stabilizer/ etc. and the like with suitable copper wire (excluding carriage and dismantling/ reassembling charges). (Note: The unserviceable scrap copper generated is not taken into account for estimation of rates and shall be accounted separately). |
71 | Providing and fitting of finished new electrolytic grade copper wire windings with insulation in place of damaged windings including allied jobs such as varnishing (Becks or any other reputed make) drying, etc., (Both HV & LV) - per kg of winding. |
72 | Providing and fitting of finished new electrolytic grade copper strip windings with insulation in place of damaged windings including allied costs such as varnish (Becks or any other reputed make), drying, etc., (Both HV & LV) - per kg of winding. |
73 | Varnishing, impregnation and drying of stator windings of LT motors with standard quality varnish (Becks or any other reputed make) as specified below along with proper tapings, etc. as per requirement. (excluding dismantling/ refitting charges) of motors |
74 | upto 5HP |
75 | > 5 HP upto 20 HP |
76 | > 20 HP upto 50 HP |
77 | > 50 HP upto 100 HP |
78 | > 100 HP upto 200 HP |
79 | > 200 HP upto 350 HP |
80 | > 350 HP |
81 | Providing and replacement of copper contact points on Voltage stabilizer regulator plate |
82 | Providing and Fitting of LV copper terminal connectors with allied insulation _ (for finished weight of the connector) |
83 | Starters and Allied Components |
84 | CONTACTORS |
85 | Providing and fitting of 3-pole contactor with specified coil voltage: |
86 | L&T ML 1.5 |
87 | L&T ML 2 |
88 | L&T ML 3 |
89 | L&T ML 4 |
90 | L&T ML 6 |
91 | L&T ML 12 |
92 | HAVELLS CH2-225T |
93 | HAVELLS CH5-400T |
94 | HAVELLS CH7-630T |
95 | LC1 FDP 300A (SCHNEIDER-TC) |
96 | LC1 FDP 400A (SCHNEIDER-TC) |
97 | LC1 FDP 500A (SCHNEIDER-TC) |
98 | L&T MNX 225 |
99 | L&T MNX 250 |
100 | L&T MNX 300 |
101 | L&T MNX 400 |
102 | MK1 |
103 | MK2 |
104 | MU1 |
105 | MU1H |
106 | MU2 |
107 | MU3 |
108 | 32A AC-3 rating (Siemens 3TF/ L&T Type MO/ Schneider) |
109 | 45A AC-3 rating with 2NO + 2NC auxillary contacts (Siemens 3TF/ L&T Type MO/ Schneider) |
110 | Providing and fitting of new AC coil with specified coil voltage for contactors as under: |
111 | 9A to 40A AC-3 rating (Siemens 3TF) |
112 | L&T ML2/ ML2W/ ML3/ ML3W |
113 | L&T ML4/ ML4W/ ML6 |
114 | L&T ML 10/ 12 |
115 | L&T MNX 50/ 70/ 80 |
116 | L&T MNX 95/ 110/ 140 |
117 | L&T MNX 185/ 225/ 250 |
118 | L&T MNX 300/ 400 |
119 | Providing and fitting of new Contact kit set for contactors |
120 | 32A AC-3 rating (Siemens 3TF) |
121 | L&T ML 2 |
122 | L&T ML 3 |
123 | L&T ML 4 |
124 | L&T ML 6 |
125 | L&T ML 10 |
126 | L&T ML 12 |
127 | Providing and fitting of auxillary contactors/ control relay |
128 | L&T MX0 having 04 contacts (all combinations) for AC control |
129 | L&T MX0 having 04 contacts (all combinations) for DC control |
130 | L&T ML (1NO+1NC) side mounting auxillary contact block |
131 | L&T MNX/MCX front mounting type having 04 contacts (all combinations) |
132 | TIMING RELAYS |
133 | Providing, fitting and setting up of single range auto reset synchronous ON delay timer (L&T or equivalent make) |
134 | Providing, fitting and setting of electro pneumatic timing relay with timing range upto 60s; coil voltage 415V AC (BCH make or equivalent) . |
135 | (2NO + 2NC) double block; ON delay |
136 | (2NO + 2NC) double block; ON & OFF delay |
137 | Providing and fitting of spares for electro pneumatic timing relay (BCH make or equivalent) . |
138 | (2NO + 2NC) contact block |
139 | Magnetic coil 415V AC |
140 | Magnet frame assembly without coil |
141 | Providing, fitting and setting of DIN mounted electronic Timer (L&T GIC or equivalent make) |
142 | Star Delta (range from 3s - 120s)240V AC |
143 | Star Delta (range from 3s - 30s)240 - 415V AC |
144 | ON delay (0.3s - 30hrs) 240V AC |
145 | THERMAL OVERLOAD RELAY |
146 | Providing, fitting and setting of thermal overload relay of specified relay range(Make: L&T MN2) |
147 | Relay ranges in between 0.2A to 15A |
148 | 14-23A |
149 | 20-33A |
150 | 24-40A |
151 | Providing, fitting and setting of thermal overload relay of specified relay range(Make: L&T MN5) |
152 | 20-33A |
153 | 30-50A |
154 | 36-60A |
155 | 45-75A |
156 | 66-110A |
157 | L&T MU-G SUBMERSIBLE PUMP CONTROLLER SPARES |
158 | Volt-Ammeter 500V, |
159 | Electronic Star-Delta Timer 3-30s (L&T ST100) |
160 | Providing and fitting of Terminal Block |
161 | 60A - 3 way |
162 | 100A - 3 way |
163 | Single phase preventing relay Sz5 type |
164 | Single phase preventing relay SDz5 type |
165 | Providing, fitting and setting of thermal overload relay of specified relay range(Make: L&T MU) |
166 | MK1 (all ranges) |
167 | MU1 (all ranges) |
168 | MU2 relays of following ranges |
169 | 9 - 14A |
170 | 13 - 21A |
171 | 15 - 25A |
172 | 20 - 32A |
173 | 24 - 38A |
174 | 28 - 42A |
175 | Providing and fitting of standard operating coil for following contactors |
176 | Mk1/ Mk2 |
177 | MU1/ MU2/ MU3 |
178 | Providing and fitting of contact bridge without contact of following contactors |
179 | MU1/ MU2/ MU3 |
180 | Providing and fitting of single moving contact of following contactors |
181 | Mk1/Mk2 |
182 | MU1 |
183 | MU2 |
184 | MU3 |
185 | Switch Gear |
186 | MCCB |
187 | Providing and fitting of 3-pole 415V MCCB with thermal magnetic release having 36kA breaking capacity (Ics= 100% Icu) (Make: L&T d-sine or equivalent) having max. of thermal release range as under: |
188 | upto and including 100A (Ics= 50% Icu) |
189 | 125A |
190 | 160A |
191 | 200A |
192 | 250A |
193 | 400A |
194 | Providing and fitting of 3-pole 415V MCCB with thermal magnetic release having 50kA breaking capacity Ics = 100% Icu (Make: L&T d-sine or similar) Having max. of thermal release range as under: |
195 | 160A |
196 | 200A |
197 | 250A |
198 | 400A |
199 | 630A |
200 | Providing of set of spreader terminals for above 3-pole MCCBs |
201 | 100A |
202 | 125A |
203 | 250A |
204 | 400A |
205 | 630A |
206 | Providing and fitting of 4-pole 415V MCCB with thermal magnetic release having 50kA breaking capacity Ics = 100% Icu (Make: L&T d-sine or similar) Having max. of thermal release range as under: |
207 | 125A |
208 | 160A |
209 | 200A |
210 | 250A |
211 | 400A |
212 | 630A |
213 | SPARES FOR ACB (L&T C-POWER) |
214 | Providing and fitting of pole assembly for draw out type ACB (L&T C-power) |
215 | upto 1250A |
216 | 2000A |
217 | Providing and fitting of Arc Chute (440V) for ACB (L&T C-power) |
218 | upto 1250A |
219 | 1600 - 2000A |
220 | Providing and fitting of Jaw contact for ACB (L&T C-power) |
221 | 630-1000A |
222 | 1250/ |
223 | 1600A/ 2000A |
224 | Providing and fitting of Fixed arcing contact for ACB (L&T C-power) |
225 | 800- 1600A |
226 | 2000A |
227 | Providing and fitting of Moving arcing contact for ACB (L&T C-power) |
228 | 800- 2000A |
229 | Providing and fitting of Shunt release for ACB (L&T C-power) |
230 | Providing and fitting of Under Voltage Release for ACB (L&T C-power) |
231 | Providing and fitting of Earth Fault Release for ACB (L&T C-power) |
232 | Providing and fitting of Terminal Adaptor for Draw out L&T C-POWER ACB of ratings as under: |
233 | upto 800 - 1250A |
234 | 1600 - 2000A |
235 | Providing and fitting of thermal-Magnetic Release (type DN1) for L&T C-power ACB |
236 | Providing and fitting of CT for DN1 type L&T C-power ACB |
237 | 800/ 1000A |
238 | 1250/ 1600A |
239 | 2000A |
240 | Providing and fitting of main spring for 3-pole ACB (L&T C-power) |
241 | 800- 1600A |
242 | 2000A |
243 | Providing of racking handle for draw-out type ACBs (L&T C-power) rating upto 2000A |
244 | Providing and replacement of spring charging motor (AC/ DC) |
245 | Providing and replacement of motor limit switch |
246 | SPARES FOR VCB |
247 | Providing and replacement of following items |
248 | Vacuum Interrupter VAG-2 |
249 | Isolating Contact Assy. |
250 | Release Coil Assy with Plunger |
251 | Tripping Coil |
252 | Closing Coil |
253 | Ratchet Wheel |
254 | Mpring charging Motor 110V DC/ 230V AC |
255 | Motor Cut-off Limit Switch |
256 | Push-To Trip/ Close Knob Assy. |
257 | ON/OFF Indicator Assy. |
258 | Charge free Indicaator Assy. Operation Counter |
259 | Instrumentation and Panel Accessories |
260 | Providing and fitting of 96x96 flush mounting 3-phase LED ammeter/ voltmeter of Class 1 accuracy (Make: L&T/ Rishabh/ AE) |
261 | Providing and fitting of flush type analog moving iron AC meter as under: (Make: Rishabh/ AE/ C&S/ BCH/ L&T) |
262 | 48x48mm 500V voltmeter |
263 | 96x96mm 500V voltmeter |
264 | 144x144mm 500V voltmeter |
265 | 96x96mm ammeter (5A CT operated) |
266 | Providing and fitting of flush mounting 96x96mm 3-phase digitalmeter( VAF+PF)of Class 1 accuracy (Make: L&T/ Schneider/ Rishabh/ AE) |
267 | Providing and fitting of flush type frequency meter with range 45-55Hz: (Make: Rishabh/ AE/ C&S/ BCH) |
268 | Providing and fitting of 10A line current ammeter selector switch with OFF (Make: L&T/Rishabh/ AE/ Teknic) |
269 | Providing and fitting of 10A voltmeter selector switch with OFF (Make: L&T/ Rishabh/ AE/ Teknic) |
270 | Providing and fitting of tape insulated ring type metering current transformers (Rishabh/ AE/ Crompton/ Kilburn) as under: |
271 | 100/5A or 150/5A - Class 1 - Burden 5VA |
272 | 200/5A - Class 1 - Burden 10VA |
273 | 400/5A - Class 1 - Burden 15VA |
274 | 600/5A - Class 1 - Burden 15VA |
275 | 800/5A - Class 1 - Burden 15VA |
276 | 1000/5A - Class 1 - Burden 15VA |
277 | 2000/5A - Class 1 - Burden 15VA |
278 | Extra for 1A secondary upto 600/1A over corresponding rate |
279 | Providing and fitting of analog VAC hour meter (Make: L&T or equivalent make) |
280 | DIN mounting |
281 | Flush mounting |
282 | Providing and fitting of flush or projecting head push button actuator with contact block (L&T/ Teknic/ ABB/ BCH or any other reputed make) |
283 | Providing and fitting of LED phase indicator with surge protection (L&T/ Teknic/ ABB/ BCH or any other reputed make) |
284 | Providing and fitting 3 Phase, 3/4 Wire adjustable Under & Over Voltage monitoring relay (Minilec VCT D2 or equivalent) |
285 | Providing, fitting and setting of 415V auto reset single phase preventor (L&T/ Minilec/ BCH or equivalent make) |
286 | 50V or less unbalance & 1 C/ODIN mounted |
287 | 50V or less unbalance & 1 C/OPanel wall mounted |
288 | 70V or less unbalance & 2 C/ODIN mounted |
289 | Providing and fitting of 32A DP switch (Anchor/ SSK or any other reputed make) |
290 | Providing of HRC fuses (2A - 32A) ratings |
291 | Providing and fitting of Fuse holders for fuses upto 32A rating |
292 | Cables and Termination |
293 | TERMINALS/ LUGS |
294 | Providing and crimping of various aluminium tube lugs (Dowells/ Action/ or any other reputed make) with tapping, insulation as under: |
295 | 16 sq. mm |
296 | 25 sq. mm |
297 | 35 sq. mm |
298 | 50 sq. mm |
299 | 70 sq. mm |
300 | 95 sq. mm |
301 | 120 sq. mm |
302 | 150 sq. mm |
303 | 185 sq. mm |
304 | 225 sq. mm |
305 | 240 sq. mm |
306 | 300 sq. mm |
307 | 400 sq. mm |
308 | 500 sq. mm |
309 | 630 sq. mm |
310 | Providing and crimping of various copper lugs (Dowells/ Action/ or any other reputed make) with tapping, insulation as under: |
311 | 16 sq. mm |
312 | 25 sq. mm |
313 | 35 sq. mm |
314 | 50 sq. mm |
315 | 70 sq. mm |
316 | 95 sq. mm |
317 | 120 sq. mm |
318 | 150 sq. mm |
319 | 185 sq. mm |
320 | 225 sq. mm |
321 | 240 sq. mm |
322 | 300 sq. mm |
323 | 400 sq. mm |
324 | 500 sq. mm |
325 | 630 sq. mm |
326 | CABLES |
327 | Providing and fitting of XLPE insulated, 1100V 3.5-core industrial armoured aluminium cable as per IS 7098 (Preferred make: Finolex/ Gloster/ Havells/ KEI/ Polycab) |
328 | 25 sqmm |
329 | 35 sqmm |
330 | 50 sqmm |
331 | 70 sqmm |
332 | 95 sqmm |
333 | 120 sqmm |
334 | 150 sqmm |
335 | 185 sqmm |
336 | 240 sqmm |
337 | 300 sqmm |
338 | 400 sqmm |
339 | 500 sqmm |
340 | 630 sqmm |
341 | HT CABLES |
342 | Providing and fitting of XLPE insulated, 11/11KV 3-core armoured industrial AluminiumHT cable Conforming to IS 7098 (Part-2) 2011 with latest Amendments. (Preferred make: Finolex/ Gloster/ Havells/ L&T/ Polycab) |
343 | 95 sqmm |
344 | 120 sqmm |
345 | 150 sqmm |
346 | 185 sqmm |
347 | 240 sqmm |
348 | 300 sqmm |
349 | 400 sqmm |
350 | ILLUMINATION |
351 | LED Bulbs withE27 or B22 base and illumination 3000K/ 5700K/ 6500K (Preferred makes: Havells/ Philips/ Osram/ Eveready/ Crompton/ Syska/ Bajaj/ Andslite) |
352 | 5W |
353 | 9W |
354 | 15W |
355 | Providing, installation and testing of die-cast aluminium floodlight LED, colour temperature 5000 to 6500K, IP66 (Preferred makes: Havells/ Philips/ Osram Ledvance/ Crompton) |
356 | 30W |
357 | 50W |
358 | Street-lighting: Outdoor pressure die-cast aluminium IP66 roadway luminaire (streetlight) with high power LED as light source (Preferred makes: Havells/ Philips/ Osram Ledvance) |
359 | 30W |
360 | 70W |
361 | 90W |
362 | Pressure die-cast aluminium floodlight luminaire for linear tungsten halogen lamp (Havells/ Philips) |
363 | 500w |
364 | 1000w |
365 | Pressure die-cast aluminium integral floodlight luminaire parts for Havells Jeta 6 |
366 | Ballast |
367 | Housing |
368 | Providing and fitting of Open Construction (OC) Ballast for HID Lamps - 240V 50Hz |
369 | 1x70W SON/MH |
370 | 1x150W SON/MH |
371 | 1x250W SON/MH |
372 | Providing and fitting of Ignitor for HID lamps 70 - 400W |
373 | Providing, fixing and testing of various types of lamps as under: (Preferred makes: Havells/ Philips/ Osram Ledvance/ Bajaj) |
374 | Tungston linear halogen lamp |
375 | 500W |
376 | 1000W |
377 | Metal Halide Lamp |
378 | 70W/ 150W Single ended clear Tubular (MH SET) |
379 | 250W/ 400W Single ended clear Tubular(MH SET) |
380 | 70W/ 150W Double ended |
381 | High Pressure Sodium Vapour clear Tubular Lamp (SON-T) |
382 | 70W |
383 | 150W |
384 | 250W |
385 | 400W |
386 | High Pressure Sodium Vapour Elliptical Coated Lamp (SON-E) |
387 | 70W |
388 | PORTABLE LIGHTING |
389 | 3 W Rechargeable LED torch (Preferred make: Havells/ Eveready/ Andslite/ Philips/ Syska) |
390 | LED Lantern with Twin Charging mode –Charging Cable & Solar Panel (included) (Syska/ Havells/ Andslite/ Philips/ Bajaj) |
391 | Sub-Station Equipment and Overhead Line Accessories |
392 | INSULATORS |
393 | Supplying and erection of galvanised ‘D’ iron clamps complete with shackle insulator (75 mm X 90 mm), G.I bolts, nuts and washers, coach screws etc. as required (for LT lines). |
394 | Supplying and erection of 11 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required. |
395 | Supplying and erection of 33 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required. |
396 | Supplying and erection of 11 KV disc insulator with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required. |
397 | Supplying and erection of a set (of three) 11 KV disc insulator for 33 KV overhead lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required. |
398 | LIGHTNING ARRESTOR |
399 | Supplying and erection of three piece nonlinear resistor type lightning arrestor suitable for 3 wire, 11 KV overhead lines with rated voltage 9 KV (rms) with a nominal discharge current rating of 5 KA and complete with galvanised clamping arrangement, G.I. bolts, nuts, washers etc. as required. |
400 | Supplying and erection of single piece nonlinear resistor type lightning arrestor suitable for 3 wire, 33 KV overhead lines with rated voltage 30 KV (rms) with a nominal discharge current rating of 10 KA (station class) and complete with galvanised clamping arrangement, G.I. bolts, nuts, washers etc. as required. |
401 | Providing and fixing of lightning conductor finial, made of 25mm dia 300 mm long, G.I. tube, having single prong at top, with 85mm dia 6 mm thick G.I. base plate including holes etc.complete as required. |
402 | FUSES |
403 | Supply and erection of 200 horn gap fuse set suitable for 3 wire, 11 KV overhead lines. |
404 | Supply and erection of horn gap fuse set with post insulators suitable for 3 wire, 33 KV overhead lines. |
405 | Supply and erection of drop out fuse set suitable for 3 wire, 11 KV overhead lines. |
406 | Supply and erection of drop out fuse set suitable for 3 wire, 33 KV overhead lines. |
407 | Providing of 11Kv DO Operating Rod (FRP) with min. 18 ft length |
408 | Providing of 33Kv DO Operating Rod (FRP) with min. 18 ft length |
409 | Providing and fitting of fuse element of required current rating for DO Fuse. |
410 | Providing of requisite tinned copper fuse wire |
411 | SWITCHES |
412 | Providing and fitting of 11 KV 200A 3-ph Gang operated Air Break Switch |
413 | Providing and fitting of 33 KV 400A 3-ph Gang operated Air Break Switch |
414 | Providing and fitting of following Air Break switch accessories |
415 | Providing and fixing of Air Break Switch Handle |
416 | Providing and fixing of "DANGER" plate of standard size with clamps. |
417 | EARTHING |
418 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and 20mm GI (medium class) watering pipe 2.7 meter long, funnel etc. with charcoal/ coke and salt as required. |
419 | Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required. |
420 | Supplying and laying 25mm X 5mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. |
421 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. |
422 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess with GI saddles and allied fittings for connections etc. as required. |
423 | TRANSFORMER/ AUTOTRANSFORMER |
424 | Providing new CRGO lamination to the core in place of damaged core wherever necessary including cost of materials and labour |
425 | Providing and fitting of finished new electrolytic grade copper wire windings with insulation in place of damaged windings including allied such as varnish and labour, drying, etc., (Both HV & LV) - per kg of winding. |
426 | Providing and fitting of finished new electrolytic grade copper strip windings with insulation in place of damaged windings including allied costs such asvarnish and labour, drying, etc., (Both HV & LV) - per kg of winding. |
427 | Providing and fitting of finished new aluminium wire windings with insulation in place of damaged windings including labour costs, etc., (HV/ LV) - per kg of winding. |
428 | Providing and fitting of finished new aluminium strip windings with insulation in place of damaged windings including labour costs, etc., (HV / LV) - per kg of winding. |
429 | Rewinding with re-insulation of existing copper conductors (HV) by way of providing and replacement of inter-layer insulation - per kg of winding. |
430 | Rewinding with re-insulation, ducting of existing copper conductors (LV) by way of providing and replacement of inter-layer insulation - per kg of winding. |
431 | Rewinding with re-insulation of existing aluminium conductors (HV) by way of providing and replacement of inter-layer insulation - per kg of winding. |
432 | Rewinding with re-insulation of existing aluminium conductors (LV) by way of providing and replacement of inter-layer insulation - per kg of winding. |
433 | Providing and fitting of Hot dipped galvanised MS nuts, bolts and washers of assorted sizes |
434 | Supply of Neoprene Rubberized Gasket Sheet |
435 | 3mm thick |
436 | 5mm thick |
437 | 6mm thick |
438 | Credit value for scrap copper |
439 | Credit value for scrap aluminium |
440 | Providing and fitting of LV (1.1 KV) porcelain bushings of rating: |
441 | 250 A |
442 | 630 A |
443 | 1000 A |
444 | 2000 A |
445 | 3150 A |
446 | Providing and fitting of HV porcelain bushings of rating: |
447 | 250 A, 17.5KV |
448 | 630 A, 17.5KV |
449 | 1000 A, 17.5KV |
450 | 2000 A, 17.5KV |
451 | 250 A, 33KV |
452 | 630 A, 36KV |
453 | 1000 A, 36KV |
454 | 3150 A, 36KV |
455 | Providing and fitting of metal part stem with allied fittings of transformer bushings (HV/ LV) as under: |
456 | Brass |
457 | Aluminium |
458 | Copper (average) |
459 | CABLEKITS |
460 | Providing & fittingofHeat Shrinkable type Cable Terminations kit suitable for 3 core, 11 KV XLPE Grade Aluminium cable. (Indoor/Outdoor) as per latest IS and ofreputed make |
461 | 95- 185 sqmm |
462 | 240-400 sqmm |
463 | Providing and fixing of 33KV Post Insulators SC by way of replacement of damaged one confirming to IEC 61109/92-93 with latest amendments (porceline type) |
464 | Providing and fixing of 33KV Pin Insulatorswith Pin by way of replacement of damaged one confirming to IEC 61109/92-93 with latest amendments (porceline type) |
465 | Providing and fixing of 33KV Pin Insulatorswith Pin by way of replacement of damaged one confirming to IEC 61109/92-93 with latest amendments (Polymer type) |
466 | Repairing /Replacement of 11KV VCB"s |
467 | Tripping Mechanism |
468 | Modification of Mechanism |
469 | Re-setting links |
470 | Replacement of operating shaft |
471 | Shower contact |
472 | Isolating Sockets |
473 | Closing mechanism (replacement) |
474 | High Tension spring |
475 | Tripping shaft |
476 | Rollers |
477 | Latch assembly |
478 | Overhauling of 11KV VCB |
479 | Deco spray painitng |
480 | Installation,Testing and commissioning of Power Transformer with system of capcity (3.15 MVA/2.5MVA/.63 MVA/.25MVA) complete job including all neceesary testing at site |
481 | Dismanteling of Power Transformer from system of capcity (3.15 MVA/2.5MVA/.63 MVA/.25MVA) complete job |
482 | Supply,fitting,Laying of New ACSR Conductor in 33 Kv and 11 Kv installations.The Job includes extraction of damaged Conductor from HT Lines . |
483 | Conductor 0.1 |
484 | Conductor 0.03 |
485 | Conductor 0.05 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail