Military Engineer Services-MES has published Tender For Repairs To Drain, Footpath, Hardstanding, Compound Wall, Fencing, Gates And Retaining Wall Etc Under Age Br I Of Ge Brichgunj, Port Blair. Submission Date for this Tender is 20-05-2024. Footpath Work Tenders in South Andamans Andaman And Nicobar Islands. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| b7155342-a162-4857-9126-25f3acc4078b.html | Tender Notice | 0 KB |
| 8477ATender.pdf | Tender Document | 0 KB |
| BOQ_729601.xls | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Dismantling of fencing wire mesh any size and description complete all as specified and directed. |
| 2 | Dismantling wrought iron or mild steel of any description not otherwise provided for complete all as specified and directed. |
| 3 | Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed. |
| 4 | Dismantling of posts or struts (wood, steel or RCC) of any section along with old, unserviceable barbed wire, if any, including taking out embedded portion from ground and making good disturbed ground complete all as specified and as directed. |
| 5 | Excavation in post holes (or similar holes) each not exceeding 0.5 cum getting out in Hard/dense soil returning filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25cm watering and removing surplus soil to a distance not exceeding 50m and making good surfaces complete all as specified and as directed. |
| 6 | M&L for PCC 1:3:6 type C2(using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed. |
| 7 | Providing reinforced cement concrete type B-1, 1:2:4 (20mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc for fencing, average sectional area exc 100 Sq cm, but not exc 250 Sq cm with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed complete all as specified and directed. |
| 8 | Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in hard dense soil complete all as specified and directed. |
| 9 | Excavation over areas, not exceeding 1.5m deep and getting out in hard dense soil complete all as specified and directed. |
| 10 | M&L cement concrete in surface channels and drains type C2 1:3:6 (40 mm graded aggregate) complete all as specified and directed. |
| 11 | M & L for RCC M-30 design mix concrete (using 20 mm graded stone aggretate) as in foundations incl rafts, footings and mass concrete complete all as specified and directed |
| 12 | M & L for RCC M-30 design mix concrete (using 20 mm graded stone aggretate) as in retaining walls and the like any thickness above top of footing including attached pillasters and butteresses complete all as specified and directed. |
| 13 | M & L for RCC- M -30 Design Mix as in columns, pillars, piers,posts and struts complete all as specified and directed. |
| 14 | Use & waste of Form work to sides of concrete foundations, footings, bases of columns, sides & soffits of foundation and plinth beams and similar work for fair finished flat surfaces of concrete complete all as specified and directed. |
| 15 | Use & waste of Form work to faces of walls, retaining walls, abutments, parapets and staircase railings and similar works including attached pilasters, buttresses, etcfor rough finished flat surfaces of concrete complete all as specified and directed. |
| 16 | Use & waste of Form work to faces of walls, retaining walls, abutments, parapets and staircase railings and similar works including attached pilasters, buttresses, etcfor fair finished flat surfaces of concrete complete all as specified and directed. |
| 17 | Use & waste of Form work to sides of square or rectangular columns, pillars, posts and struts for fair finished surfaces of concrete complete all as specified and directed. |
| 18 | S&F Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 19 | S&F Mild steel TMT bars 5 to 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 20 | Supply only PVC coated (1mm thick) chain link fencing exc 2.00 but n.exc 3.50 kg per sqm with size of mesh 50 x 50 mm and thickness of wire n.exc 2.83 mm complete all as specified and directed. |
| 21 | Fixing only PVC coated chain link fencing including fixing of line wires any mesh, size and any type of standards, rails, straining bolts etc including provision of binding wires (Supply of MS line wire and flat iron bolt & nuts measured and paid seperately) complete all as specified and directed. |
| 22 | Supply only 6mm dia wire PVC coated for support/line wire to chain link fencing complete all as specified and as directed. |
| 23 | Supply only bars, flats etc as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 24 | Supply and fixing of mild steel angles, bars, flats etc as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 25 | Supply and fixing of mild steel bolts with hexagonal or square head one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut exc 5 cm longn.exc 10 cm long dia metre of neck exceeding 11 to 15 mm complete all as specified and as directed. |
| 26 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 27 | S&F Framed work of rolled mild steel conforming to Fe 410-W (Gde E-250) quality -A as in doors or gates of angle or other section with gusset plates, rails, braces, etc, drilled for fixing of steel sheeting or other covering; doors etc to be prepared for hanging or sliding with and including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting, running rails & guides) and hanging, fastening & fixing complete all as specified and directed. |
| 28 | S & F MS Steel work in tubular trusses and tubular posts/ purlins including special shaped washers etc., complete using ERW or inductionbutt welded tubes conforming to IS :1161-1979 grade st-240 including notching, drilling, fitting, riveting and/or welding or connecting with bed plate, bolt and nuts complete all as specified and as directed |
| 29 | S & F plates (Plain or chequered), channels, square cut or notched (ordinary and counter sunk) forming holes withattachment etc and fixed by riveting or welding or with nut and bolts (including nut and bolts) conforming to Fe- 410-W Grade E- 250, quality B, complete all as specified and as directed. |
| 30 | M&L for preparation new steel surfaces of any description exc 10cm width or girth when unconnected with other painting or when painted in a different tint, and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 31 | M&L for preparation new steel surfaces of any description n.exc 10cm width or girth when unconnected with other painting or when painted in a different tint, and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and as directed. |
| 32 | Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed. |
| 33 | Removing excavated soil to a distance not exceeding 50m and depositing where directed. at a level not exceeding 1.5m above the starting point complete all as specified and directed. |
| 34 | Dismantling Plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings in roof covering complete all as specified and as directed. |
| 35 | S&F 0.50 mm thick prepainted galvalume aluminium zinc coating GI based corrugated steel sheet of colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self taping screws complete all as specified and as directed. |
| 36 | S&F 0.50 mm thick prepainted galvalume aluminium zinc coating GI based plain steel sheet of colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self taping screws complete all as specified and as directed. |
| 37 | S&F Plain, Aluminium sheeting 0.56mm thick,Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and as directed. |
| 38 | S&F 6mm thick polycarbonate sheet fixed with aluminium strips and coach screw and washer in roof wall etc and filling gaps with silicon complete all as specified and directed. |
| 39 | S&F 2mm thk Fibre glass reinforced translucent sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and as directed. |
| 40 | Demolition of cement concrete in ground floors and pavings not exceeding 15 cmthickness (below or above ground level) complete all as specified and as directed. |
| 41 | M&L for 75mm thick cementconcrete type D2, 1:4:8 (using40mm gradedstone aggregate) in sub base of flooring/hard standing,Path way complete all as specified and as directed. |
| 42 | M&L for 50mm thick cementconcrete type B2,1:2:4 (using20mm gradedstone aggregate) finishing the surface even and fair complete all as specified and as directed. |
| 43 | Dismantling of floor, or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premishes complete all as specified and as directed. |
| 44 | M&L for Chequerred cement concrete tiles 300x300x25mm thicksize set, jointed and pointed inneat cement slurry incl 15mm thick in CM 1:6 bedding layer of mortar complete all as specified and as directed. |
| 45 | M&L for Heavy duty Vitrified tiles of size 300x300x8 to10mm thick or high dimension (except thickness) of any colour any design durastone weather proof impacr resistant abrasion resistant exterior tiles as in floors etc set and jointed in neat cement slurry over and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 46 | Supply and spread sand, 50mm thick as cushioning for paver blocks etc, all as specified at site complete all as specified and as directed. |
| 47 | S&F machine pressed precast concrete interlocking paver block any shape and size confirming to IS standards of 60mm thickness, M-35 grade, laid over with grey cement and pigments complete all as specified and as directed. |
| 48 | M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment complete all as specified and as directed. |
| 49 | M&L for providing cement concrete Type B1, 1:2:4 (using 20mm graded aggregate) as in kerb including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 50 | Demolition of reinforcement cementconcrete of any description including removal of all demolished material form site complete all as specified and as directed. |
| 51 | Pre-cast RCC slabs for covers over drains using Reinforced Cement concrete 1:2:4, type B1 (20 mm graded aggregate) set in cement mortar 1:4 complete all as specified and as directed. |
| 52 | Demolition of PCC Block walling built in CM 1:6 complete all as specified and as directed. |
| 53 | M&L for precast cement concrete solid block masonry with solid blocks using PCC 1:3:6, type C1 (using 20mm graded stone aggregate), exc. 10cm in width, set in CM 1:4 complete all as specified and as directed. |
| 54 | All as per item No. 53.00 above but except blocks complete all as specified and as directed. |
| 55 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete complete all as specified and as directed. |
| 56 | Taking down cement plaster of any desciption from wall (drain) including raking out joints hacking for key, scrubbing down with water etc, complete all as specified and directed |
| 57 | M&L for rendering 10mm thick in cement mortar 1:4 on fair faces of brick work/block masonry or concrete surfaces finished fair and even complete all as specified and as directed. |
| 58 | M&L 15mm thick cement plaster on fair faces of PCC block work or concrete surfaces in CM (1:4) and finished even and fair without using extra cement, complete all as specified and as directed. |
| 59 | Demolition of Concrete of any description and in any position not otherwise specifically provided complete all as specified and as directed. |
| 60 | M&L cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate in coping of wall complete all as specified and as directed. |
| 61 | S&F in repair galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm specing and straining and fixing to any type of standard rail straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and as directed. (Each line wire to be measured). |
| 62 | M&L Preparation of newly plastered surfaces of wall & applying Two or more coatsof 100% Premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
