}

Tender For Comprehensive Repair And Maintenance To Drain, Fencing, Gate And Paved Area In Army Area Mount Abu Under Age (I) Udaipur, Sirohi-Rajasthan

Military Engineer Services-MES has published Tender For Comprehensive Repair And Maintenance To Drain, Fencing, Gate And Paved Area In Army Area Mount Abu Under Age (I) Udaipur. Submission Date for this Tender is 21-05-2024. Paver Blocking Tenders in Sirohi Rajasthan. Bidders can get complete Tender details and download the document.




Tender Notice

43273859
Tender For Comprehensive Repair And Maintenance To Drain, Fencing, Gate And Paved Area In Army Area Mount Abu Under Age (I) Udaipur
Open Tender
Indian
Rajasthan
Sirohi
21-05-2024

Tender Documents

Additional Details Available on Click
✓ Tendering Authority
✓ Publication Document
(Tender Document / Tender Notice )

Tender Details

Comprehensive Repair And Maintenance To Drain, Fencing, Gate And Paved Area In Army Area Mount Abu Under Age ( I ) Udaipur

Key Value

Document Fees
INR 500 /-
EMD
INR 25200.0 /-
Tender Value
INR 12.60 Lakhs /-

Attachment

FileName File Description File Size
872b2dee-beca-4201-9861-5d54da73f0a7.html Tender Notice 0 KB
001MountAbuByeLaws.pdf Tender Document 0 KB
002MountAbuByeLaws.pdf Tender Document 0 KB
8881SC.pdf Tender Document 0 KB
8881TENDER.pdf Tender Document 0 KB
BOQ_729538.xls Tender Document 0 KB
Tendernotice_1.pdf Tender Document 0 KB

BOQ Items

Name of Work: COMPREHENSIVE REPAIR AND MAINTENANCE TO DRAIN, FENCING, GATE AND PAVED AREA IN ARMY AREA MOUNT ABU UNDER AGE (I) UDAIPUR
Sl. No. Item Description
1Demolition of cement concrete (unreinforced) in ground floor and pavings not exceeding 15cm thickness below or above ground level andremovingmaterial from site ofm workas directed by the Engr-in-Charge.
2Dismantling posts or struts embedded in any surfaces (natural, concrete, masonary etc.) and of any description, any section, taking out embedded portion and making good to disturbed ground surface , complete all as specified & directed by Engineer-in-Charge.
3Dismantling of chain link fencing of any description complete all as specified.
4Excavating in post holes (or similar holes) each n.exc0.5cum, getting out in soft/loose soil, returning filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25cm thick and removing surplus soil to a distance n.exc.50m and making good surface, complete all as specified.
5Material & labour for PCC 1:3:6 type C-2 (using 40 mm graded mechanically crushed stone aggregate), as in foundation filling and mass concrete of post holes, complete all as specified.
6Supply & fixing Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; Framing over fencing post with welded to each post, framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work complete all as specified and directed.
7Supply & fixed mild steel, rolled sections(channel, angle or tee sections) fixed independently cut to ordinary length as in fencing post or struts in fencing etc. including cutting tops to shape as required , drilling holes, notching for wire etc. including flat iron fillets with nuts & bolts for securing chain link fencing including all necessary drilling, bolting or riveting etc complete all as specified and directed.
8Supply & fixing G.I. chain link fencingof dia of wire 3.15 mm thick, G.I. coating , size of mesh 75mmx75mm to 100mmx100mm complete all as specified & directed.
9Supply and fixed forgalvanized2 strand, steel barbed wire, 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, includingsecuring or tying at crossing with & provision of galvanized mild steel wire, staples or steel pins etc (each line of wire to be measured), complete allas specified.
10Material and Labour for steel screw bolts, machine made, dia of neck 11 to 15mm with hexagonal or square head one end and screwed the other or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut exceeding 5 cm and not exceeding 10cm long, complete all as specified and directed.
11Material and Labour for mild steel round bars 6mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping columns, hooking ends and binding with mild steel(annealed) wire not less than 0.9mm dia,complete all as specified.
12Material and Labour for two coats of synthetic enamel paint on steel surfaces over one coat of red oxide primer including preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth, complete all as specified.
13Demolition of brick work or stone masonary, precast cement concrete walling built in cement mortar includingall quoins, arches, pillars etc., complete all as specified.
14Material and labour for brick work with sub class ‘B’ bricks, straight or curved on plain exceeding 6 metre mean radius built in cement mortar (1:6), complete all as specified.
15Material and labour for Brick work with sub class ‘B’ bricks (Except Bricks), straight or curved on plain exceeding 6 metre mean radius, built in cement mortar (1:6) , complete all as specified.
16Material and labour for Brick work with sub class ‘B’ bricks,straight or curved on plain exceeding 6 metre mean radius in cement mortar (1:4), for half brick thick wall complete all as specified.
17Demolition of stone masonry, built in cement mortar as in drain, manhole, septic tank and soak well complete all as specified and directed.
18Material & Labour for walling of random rubble uncoursed well bonded bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed.
19Material & Labour for walling of random rubble uncoursed well bonded bedded and solidly hearted, built in cement mortar 1:6 but except stone.
20M & L for Keyed pointing to random or polygonal rubble, uncoursed or brought upto course in CM 1:3 complete all as specified and directed.
21Material andLabour for 15mm thick rendering on fair faces of brick work, concrete surfaces or stone walls in cement mortar 1:4 mixed with liquid water proofing compound using as per manufacturer’s instructions,finished even and fair, complete all as specified. Note : WPC shall be measured and paid separately.
22Supply only liquid water proofing compound, ISI marked complete all as specified and directed.
23Material & labour for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base/mass concrete and finished the top surface even and fair complete all as specified.
24M & L for PCC 1:2:4 type-B2 (40 mm graded stone aggregate), 75 mm thick, as in flooring, pavings, hardstanding etc finished even and smooth without using extra cement complete all as specified and directed.
25Material & labour for PCC 1:2:4 type B-1 ( using 20mm graded mechanically crushed stone aggregate) as in bed blocks, copings, apex stones,side of interlocking tiles etc complete all as specified and directed.
26M&L for Vitrified out door tiles 40 cm x 40 cm x 10-12 mm thick digital design set, jointed and pointed in neat cement slurry as in floors with grey cement over & including over screed bed or bedding layer of mortar 20 mm thick Cement Mortar 1:6 . (Make-H & R Johnson, Brand-Endura digital designer series or equivalent)
27Material and labourfor 300x300x20-25mm thick chequered cement concrete tiles rubberised moulded with grey cement and pigment set, jointed and pointed in neat cement slurry includinglaidover a screed bed of 20 mm thick in CM 1:6 complete all as specified and directed.
28S&F Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.
29Preparation of old paver block/ chequered tiles foors any pattern by broomingdown or steel wire brushing for removing caked mud, trading oil and greasy spots, cleaning with water etc. and applying two coats glossy Indigo floor coat emulsion paint premium series complete all as specified and directed.
30M&L for machine Pressed precast concrete coloured or plain interlocking paver block rubberised moulded any shape & size conforming to IS- 15658 - 2006 of 80 mm thickness M-40 Grade with grey cement & pigment over and including average 40 mm thick sand cushioning complete all as specified.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail