Military Engineer Services-MES has published Tender For Special Repair And Additional/Alternator To Sewage Treatment Plant/Drain Pipe Of Transit Camp And Provn Of Door (Pvc) For Newly Constructed Bathroom Near Transit Shed Of Mc/Mf Det Under Ge Guwahati. Submission Date for this Tender is 20-05-2024. Mobile Generator Tenders in guwahati Assam. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| fcc07f6b-07df-4c7b-a1cc-e0da2a0daf23.html | Tender Notice | 0 KB |
| BOQ_729478.xls | Tender Document | 0 KB |
| Tenderdoc_8383.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Material and Labour for surface cleaning of all the below mentioned items and scrapping the old paint from the surface and painting the one coat of primer after cleaning including preparation of old steel surface and painting with one coat of synthetic enamel paint on machineries/equipments/filters/motors /pumps/compressors/ ladders/ walkovers/ pipelines/ cable trays/switch boards, panels and any other parts connected to STP/ SLPH with paint of approved colour using spray gun complete all as specified and directed. |
| 2 | Material and Labour for emptying the tanks of the STP and scrapping the deposited sludge on the side surface of the tanks and cleaning including preparation of tanks/separaters and any other parts connected to STP applying one coat of bituminous black paint all as specified and directed. Note :- The rate quoted is deemed to include for emptying and preparation the surface of tanks and other parts of painting. |
| 3 | Material and Labour for cleaning of primary settling /collection tankatTransit Camp by pumping out raw sewage with the aid of suitable non clog submersible/surface mounted pumps, removing the sludge settled at the bottom, cleaning the bottom and side surface of the tanks by scrapping with steel scrappers and wire brush, finally cleaning with dilute chemical solution of sodium hypochlorite & then with fresh water including writing letters on the outer surface of the tank with synthetic enamel paint as "TANK CLEANED ON ----(DATE) AND DUE ON - --DATE with 10cm high stencil cut English letter all as specified and directed. Note:-(a) The chemical used for the cleaning of the tank is included in the above quoted rate (b) The contractor is responsible for the transportation, labor and depostion of the removed sludge outside the cantonment area as per prescribed guidelines isuued by Central or Assam Pollution control board (whichever supercedes) all as specified and directed and the above quoted rate includes the same. |
| 4 | All as per item No 1.02 herein before, but for Aeration tank located at Transit camp. |
| 5 | All as per item No 1.02 herein before, but for equilisation tanklocated at Transit camp. |
| 6 | All as per item No 1.02 herein before, but for secondary clarifier tank located at Transit camp. |
| 7 | All as per item No 1.02 herein before, but for chlorine contact tank tank located at Transitcamp. |
| 8 | Material and Labourfor fabrication work for sewage treatment plant by Supply & Fixing of MS sheets of 4 mm thickness and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint, complete all as specified and as directed. |
| 9 | Taking down old unserviceable F R Psolution preparations cum settling tank and Supply and Fixing,F R Psolution preparations cum settling tank, capacity 100 ltrs with level gauge, lid, inlet / outlet connection, drain connection and fitted with speed reducer, motor and SS agitator complete all as specified and directed. |
| 10 | Taking down old unserviceable chemical dozing pump and Supply and Fixing chemical dosing (metering) pump, 6 ltrs / hr @ 10 kg back pressure, electromagnetic type with suction & discharge tubing, spring loaded anti siphon valve, foot valve etc complete all as specified and directed. |
| 11 | Supply and fixing in repair 100 mm bore cast iron flanged & drilled both ends sluice valve, (ISI marked) long body type, conforming to IS 14846-2000; Class PN-1.6 with iron wheel head & brass spindle including all jointing materials and mild steel nuts, bolts, washers, rubber / fibre board gaskets etcand testingcomplete all as specified and directed. |
| 12 | Taking down old unserviceable CI butterfly valve of any make and size and supply and fixing of new CI Butterly valve slim seal design with nitrile rubber lined seat with clutch lever (p10) of size 100 mm conforming to IS 13095 complete all as specified and as directed. |
| 13 | Supply and Fixing in repair including taking out existing pipe of any typefor 3- layer PP-R (Polypropylene random copolymer) pipes 32mm outer dia ,SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including fittings PP-R plain & brass threaded type polypropylene randomsockets and bends as required at site laid in trenches/floor at places where directedcompleteall as specified and directed. |
| 14 | Supply and Fixing in repair including taking out existing pipe of any type for 3- layer PP-R (Polypropylene random copolymer) pipes 110 mm outer dia ,SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all fittings PP-R plain & brass threaded type polypropylene random sockets and bends as required at site laid in trenches/floor at places where directedcompleteall as specified and directed. |
| 15 | Supply and Fixing in repair PP-R Ball valves , high pressure, with polythene float and flynut complete, screwed for iron /PPR pipe (32mm dia) or brass ferrule and fixed all complete all as specified and directed. |
| 16 | Taking out centrifugal pump of 10 HP capacity from its foundation duly disconnect suction and delivery lines, transport to authorized civil workshop and back to site after repairs, dismantling, opening and sort out defective spares/parts and cleaning, servicing including greasing, servicing of spares after replacement of defective spares including painting of pump with two coats of synthetic enameled paint as per existing colour after and including preparation of old painted surface of pump set and re-fixing, mounting the base to its original foundation, testing and commissioning complete as required and all as specified and directed.. Note:- New spare as required shall be measured and paid separately as "supply only" under following items:- |
| 17 | Supply only motor bearingDE complete all as required and as directed. |
| 18 | Supply only pump bearing NDE complete all as required and as directed. |
| 19 | Supply only PVC cooling fan suitable for pump set 10 HP mortor complete all as required and as directed. |
| 20 | Supply only casing wear ring complete all as required and as directed. |
| 21 | Supply only Bearing Cover complete all as required and as directed. |
| 22 | Supply only set of key complete all as required and as directed. |
| 23 | Taking out defective burnt out electric driven centrifugalmotor of capacity 10 HP working on 3 phase, 440 volts 50Hz duly disconnecting electric and mechanical connection from pump and transport to civil workshop, dismantling and opening the motor into parts and taking out burnt out starter winding, cleaning, servicing slots etc. drying all parts and sort out defective spares, rewinding the starter winding with suitable size of super enameled copper wire as per existing gauge including replacement of insulating materials, varnishing, heating up starter winding in heating chamber to achieve insulationresistance at least 6 Ohms and reassembling after replacement of defective parts/spares including testing at workshop, transporting to site and reinstalled, mounting to its original position including coupling with respective pump and reconnect all disconnected connections, disconnected cable connections and mechanical support etc. including painting to motor with one coat of synthetic enamel paint as per existing colour, writing SM/MES No.(size of letters as ordered) after preparation of old painted surfaces including testing and commissioning complete all as required and as directed. |
| 24 | Taking out defective burnt out electric driven centrifugalmotor of capacity 2 HP working on single phase, 230 volts 50Hz duly disconnecting electric and mechanical connection from pump and transport to civil workshop, dismantling and opening the motor into parts and taking out burnt out starter winding, cleaning, servicing slots etc. drying all parts and sort out defective spares, rewinding the starter winding with suitable size of super enameled copper wire as per existing gauge including replacement of insulating materials, varnishing, heating up starter winding in heating chamber to achieve insulationresistance at least 6 Ohms and reassembling after replacement of defective parts/spares including testing at workshop, transporting to site and reinstalled, mounting to its original position including coupling with respective pump and reconnect all disconnected connections, disconnected cable connections and mechanical support etc. including painting to motor with one coat of synthetic enamel paint as per existing colour, writing SM/MES No.(size of letters as ordered) after preparation of old painted surfaces including testing and commissioning complete all as required and as directed. |
| 25 | Taking down old unserviceable LT Panel of any make and size and Supply , install, testing and commissioning of floor mounted LT INDOORPANEL box AC 415 V , 50 HZ 3 Phase 4 wire of suitable size for accomodating the following accessoriestotally enclosed self supporting structure / cubicle , fully compartmentalized type , suitable for indoor use , with bottom cable entry with suitable cable glands structure made out of 3.15 mm thick with CPRI Approved CRCA steel sheet of Size ( 0.9 x 0.9 x 0.6) m with angle iron frame work and legs of ISA 50X50X5 mm , with four legs grouted to PCC (1:2:4) type B1 , foundation block with suitable mounting arrangement for bus bars voltmeter, ammeter , changeover switch and MCCBs , hinged doors at front with suitable locking arrangement , Provision of louvers at sides , structure treated under 8 - tank metal treatment process and duly powder coated , completeall as specified and directed .(Panel for sewage pump house) INCOMER (a) Supply and fixing MCCB 4 pole 415 Volts with mocroprocessor controller of breaking capacity of 16 KA of 100 Amps with Fixed thermal and Fixed magnetic setting- 01 Nos BUSBAR :-(Outgoing) (i)Aluminium bus bar 160 Amps , supported on non hygroscopic fibres and brass screws for mounting -04 Nos INDICATING DEVICES (a) Supply and fixing LED Indicating lamps for Main Supplyindicating R, Y, B - 03 Nos (b )Supply and fixing Digital Ampere Meter of size 100mmX100mm for 0-300 A display , incl CT having CTR 200/5 - 01 Nos & Digital Voltmeter 0-500 Volts , SIF 96 - 01 Nos OUTGOING FEEDERS (a)Star Delta starter OF 12.5 HP - 05 Nos (b) DOL Starter of 02 HP -02 Nos |
| 26 | Material and Labour for earthing complete with galvanised steel earth plate 600mm x 600mm x6mm thick elecrode and 25mm x 4 mm galvanised iron strip as earthing lead burried directly in ground vertically (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level, the earth plate surrounded by adequate quantity of charcoal dust and common salt to a packed thickness of 15 cm on all sides connected to GI strip 25mm x 4mm as earth lead by means ofbolts, nuts, check nuts and washers (including welding) of galvanised iron or steel and connected to main switch board / panel/ test point at the other including necessary earth work in any type of soil, returning filling in and removal of surplus soil, concrete pit in PCC (1:3:6) type C1, pre cast RCC 1:2:4 type BI cover slab 54cm x 54cm x 5cm reinforce with 8mm dia bar TMT @150mm centre to centre both ways with one handle for lifting made out 8mm dia MS bar with wire mesh funnel, 20mm GI tubing medium grade for watering and 40mm GI tubing light grade for protection, test point, testing on completion all as shown in Electrical Plate No 3 of SSR Part-I complete all as specified and directed. |
| 27 | Designing supply,install,testing commissioning iron removal pressure feed type filtration plant 8000 LPHwith catalytic and filtration media (as required size and grade/mesh to obtain sewage water recommended parameters) including frontal pipe(duly welded) ,cocks, valvesoxidation chamber with media (MnO2) with all accessories suitable capacity with all fittings fixture, pressure gauge, RCC/PCC foundation as per OEM recommendation, drainage system and connected to rising and delievery system including painting and writing complete. The technical detail of oxidation chamber and multigrade filter are as given below- (i) Oxidation ChamberFeed Flow- 8 cum/hrvessel sie in mm- 24 X 72 mm Material of vessel- FRP Media Type- Maganese di oxide (ii) Multigrade filter Feed Flow- 8 cum/hr Filtering media detail- Media type- Mixed Sand Depth of sand- 720 Kg Material of vessel- FRP |
| 28 | Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep for taking out / laying of under ground cable, pole or stay and getting out in soft soil strata complete all as specified and directed. |
| 29 | Returning filling in including spreading leveling watering and well ramming in layers not exceeding 25cms spread any type of soil complete all as specified and directed. |
| 30 | Removing excavated materials not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point all as specified and directed. |
| 31 | Supply and layingdry river sand cushioning for cable protection with a layer of 8cm deep before laying and 15cm after layinggentlypunned down to 10 cm on top of the cable as per SSR Part-I complete all as specified and as directed. (Note : Punned thickness shall be measured). |
| 32 | Supply and laying in trenches bricks common burntclay, building brick, sub class B designation 75 old size bricks for cable protection,flat and width wise along the axis of trench all as specified and directed. |
| 33 | Material and Labour for supply and fixing / Laying , connect, test and commissioning of LT under ground cable of size 25 Sqmm 3.5 Core, XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured,electric cable (heavy duty) with multistranded aluminium conductor,1100 Volts grade in trenches/on wall/poles laid in ducts/inside protection pipe of including cable glands,lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct) all as specified and directed. |
| 34 | Testing of inlet andoutlet sewage samples as per Environmental Protection Act for effluent discharge into inlet surface water from Government institute/ labsand submit the test report for the following parameters complete all as specified and directed:- (i) pH valve (ii) TSS (iii) O&G (Oil & Grease) (iv) BOD (v) COD (vi) FC (vii) Nitrate (N) (viii) Residual Chlorine (Note : Testing of one sample each for inlet and outlet shall be considered as one job. Testing shall be carried out once in a month at regular interval) |
| 35 | Taking down carefully aluminium / copper point wiring (light, fan, socket, powerpoint) including batten, conduit and fittings such as switches, ceiling rose, sockets, brackets, switch board etc removing, making good distrubed surfaces of wall, floor, ceiling etc complete all as specified and directed. |
| 36 | Material and Labour for point wiring for Light/Fan/Bell point controlled by one, one way switch with 1.5 sqmm cable PVC unsheathed and insulated copper multistranded conductorFRLS type 1100 Volts grade cable ( red colour cable for Phase connection and black colour cable for neutral connection )including PVC concealed conduit with all accessories including 1.5 sqmm copper multistrand conductor FRLS tye 1100 Volts grade unsheathed PVC insulated ( green colour ) continuity earth wire connected to common earth dolly and sunk cast pressed steel terminal box made out of MS sheet 1.25 mm thick for mounting of fittings like switch , socket and fan regulator with 3 mm thick hylum laminated sheet cover incl cutting Chases pinning in, for concealed conduit wiring and making goods of disturbed surface complete all as specified and directed. ( Note : Cutting and chasing deemed to be included in quoted rate.) |
| 37 | Supply and Fixing ceiling rose, surface, Bakelite, 65x50 mm two to three terminals complete all as specified and directed. |
| 38 | Supply and fixing in replacement ofLED batten lights fitting 1x 18 W, 220V, ACwith driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 39 | Supply and Fixing in repair Factory made board distribution in sheet steel enclosure double door glazed with 200 Amps ratedbus bar,SPN, 4 ways, 240 Volts suitable for housing MCBs complete all as specified and as directed. |
| 40 | Supply and Fixing in repair MCB, DP, 240 volts, B Curve , 32 Amps 10 KA complete all as specified and as directed. |
| 41 | Supply and Fixing in repairMCB,SP,240 volts,5 to 32 Amps 10 KA.complete all as specified and as directed. |
| 42 | Supply and fixing PVC door frame of size 50x47made out of 5mm wood grain printed PVC sheet, reinforced with MS square tube all as specified and as directed. |
| 43 | Supply and Fixing of Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail, Paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joining together with solvent cement, supplying & fixing in the frame at site complete all as specified and directed. |
| 44 | Supply and fixing Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed |
| 45 | Supply and fixing Aluminium anodised cast type handle of 150mm size complete all as specified and directed |
| 46 | Supply and fixing aluminium anodised , barrel tower bolts of extruded section with length of bolt 150mm and fixed complete all as specified and as directed. |
| 47 | Material and Labour for hardcore (broken stone & boulders) of gauge n exc. 63mm, deposted, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface all as specified and as directed. |
| 48 | Material and Labour for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection finish even & smooth without using extra cement all as specified and as directed.. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
