Tender For Construction Of Auction Hall And Cold Storage-Construction Of Auction Hall-General Civil Work, puthiyappa-Kerala

Tender For Construction Of Auction Hall And Cold Storage-Construction Of Auction Hall-General Civil Work; 1 Construction Of Auction Hall And Cold Storage 2 Od8101 / 2023-2024:Providing, Driving And Installing Driven Cast-In-Situ Reinforced Cement Concrete Piles Of Grade M-30 Of Specified Diameter And Length Below The Pile Cap, To Carry Safe Working Load Not Less Than Specified, Excluding The Cost Of Steel Reinforcement But Including The Cost Of Shoe And The Length Of Pile To Be Embedded In The Pile Cap Etc.All Complete. ( Length Of Pile For Payment Shall Be Measured From Top Of Shoe To The Bottom Of Pile Cap ) :500 Mm Dia Piles 3 10.22:Welding By Gas Or Electric Plant Including Transportation Of Plant At Site Etc. Complete. 4 20.6.1.1:Vertical Load Testing Of Piles In Accordance With Is 2911 ( Part Iv ) Including Installation Of Loading Platform And Preparation Of Pile Head Or Construction Of Test Cap And Dismantling Of Test Cap After Test Etc. Complete As Per Specification & The Direction Of Engineer -In-Charge.Single Pile Upto 50 Tonne Capacityinitial Test 5 4.1.8:Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level:1:4:8 ( 1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Nominal Size ) 6 Od8102 / 2023-2024:Providing And Laying In Position Machine Batched And Machine Mixed Design Mix M-30 Grade Cement Concrete For Reinforced Cement Concrete Work, Using Cement Content As Per Approved Design Mix, Including Pumping Of Concrete To Siteof Laying But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement, Including Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate, Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability As Per Direction Of Engineer - In-Charge. Note:- Cement Content Considered In This Item Is @ 330 Kg / Cum. Excess Or Less Cement Used As Per Design Mix Is Payable Or Recoverable Separately.All Work Upto Plinth Level 7 Od8103 / 2023-2024:Providing And Laying In Position Machine Batched And Machine Mixed Design Mix M-30 Grade Cement Concrete For Reinforced Cement Concrete Work, Using Cement Content As Per Approved Design Mix, Including Pumping Of Concrete To Siteof Laying But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement, Including Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate, Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability As Per Direction Of Engineer - In-Charge. Note:- Cement Content Considered In This Item Is @ 330 Kg / Cum. Excess Or Less Cement Used As Per Design Mix Is Payable Or Recoverable Separately.All Work Above Plinth Level Upto Floor V Level 8 5.9.5:Centering And Shuttering Including Strutting, Etc. And Removal Of Form For:Lintels, Beams, Plinth Beams, Girders Bressumers And Cantilevers 9 5.9.6:Centering And Shuttering Including Strutting, Etc. And Removal Of Form For:Columns, Pillars, Piers, Abutments, Posts And Struts 10 5.9.3:Centering And Shuttering Including Strutting, Etc. And Removal Of Form For:Suspended Floors, Roofs, Landings, Balconies And Access Platform 11 5.11.1:Extra Additional Height In Centering, Shuttering Where Ever Required With Adequate Bracing, Propping Etc. Including Cost Of De-Shuttering And Decentering At All Levels, Over A Height Of 3.5M, For Every Additional Height Of 1 Metre Or Part Thereof ( Plan Area To Be Measured ) .Suspended Floors, Roofs, Landing, Beams And Balconies ( Plan Area To Be Measured ) 12 5.22.6:Steel Reinforcement For R.C.C Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Levelthermo - Mechanically Treated Bars Of Grade Fe-500D Or More 13 2.25:Filling Available Excavated Earth ( Excluding Rock ) In Trenches, Plinth, Sides Of Foundation Etc. In Layers Not Exceeding 20 Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50 M And Lift Up To 1.5 M. 14 50.13.1:9 Mm Cement Plastering Of Mix : 1:3 ( 1 Cement : 3 Fine Sand ) Including All Cost Of Materials, Labour Charges Etc Complete 15 13.1.1:12 Mm Cement Plaster Of Mix:1:4 ( 1 Cement : 4 Fine Sand ) 16 13.46.1:Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade:New Work ( Two Or More Coat Applied @ 1.67 Ltr / 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg / 10 Sqm ) 17 16.90:Providing And Laying Tactile Tile ( For Vision Impaired Persons As Per Standards ) Of Size 300X300x9.8Mm Having With Water Absorption Less Than 0.5% And Conforming To Is: 15622 Of Approved Make In All Colours And Shades In For Outdoor Floors Such As Footpath, Court Yard, Multi Modals Location Etc., Laid On 20Mm Thick Base Of Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) In All Shapes & Patterns Including Grouting The Joints With White Cement Mixed With Matching Pigments Etc. Complete As Per Direction Of Engineer-In-Charge. 18 56.1.A:Mobilization Including Transportation Of All Necessary Plant And EquipmentS And Materials Of Boring, Field Testing And Sampling And Demobilization After Completing The Work - For Machine Boring 19 56.2.A:Setting Up Boring At Each Bore Hole Locations Including Carrying All Necessary Plant, Equipment And Materials Of Boring And Field Tests And Collection Of Samples At Each Bore Hole Location - For Machine Boring. 20 56.3.A.1:Boring With Rotary Power Drilling EquipmentS In - All Types Of Soil Having N Value Less Than 50 Excluding Hard Rock, Soft Rock Or Medium Rock For Strata Upto 10M Including Conducting Necessary S.P.T And Recovery Of Undisturbed Soil Samples At 5M Intervals - For Ordinary Soil. 21 56.3.B.1:Boring With Rotary Power Drilling EquipmentS In - All Types Of Soil Having N Value Less Than 50 Excluding Hard Rock, Soft Rock Or Medium Rock For Strata Next 10M And Upto A Depth Of 20M Including Conducting Necessary S.P.T And Recovery Of Undisturbed Soil Samples At 5M Intervals - For Ordinary Soil. 22 56.3.C.1:Boring With Rotary Power Drilling EquipmentS In - All Types Of Soil Having N Value Less Than 50 Excluding Hard Rock, Soft Rock Or Medium Rock For Strata Next 10M And Upto A Depth Of 30M Including Conducting Necessary S.P.T And Recovery Of Undisturbed Soil Samples At 5M Intervals - For Ordinary Soil. 23 56.7:Conducting Standard Penetration Test In Bore Hole At Any Depth. 24 15.2.1:Demolishing Cement Concrete Manually / By Mechanical Means Including Disposal Of Material Within 50 Metres Lead As Per Direction Of Engineer - In-Charge.Nominal Concrete 1:3:6 Or Richer Mix ( I / C Equivalent Design Mix ) 25 5.26:Providing And Filling In Position, Blow Bitumen In Expansion Joints. 26 Od5864 / 2023-2024:Based On 5.43.2 Providing And Fixing In Position Stainless Steel Grade 304 Plate 1.0 Mm Thick As Per Design

INR 8270 /-

INR 100000.0 /-

INR 2.50 Crore /-

Work Name:GENERAL-PMMSY-2022-23-Puthiyappa FH-Construction of Auction Hall and cold storage-Construction of auction hall-General Civil Work

Sl. No.	Item Description
1	Construction of auction hall and cold storage
2	OD8101/2023-2024:Providing, driving and installing driven cast-in-situ reinforced cement concrete piles of grade M-30 of specified diameter and length below the pile cap, to carry safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of shoe and the length of pile to be embedded in the pile cap etc.all complete. (Length of pile for payment shall be measured from top of shoe to the bottom of pile cap):500 mm dia piles
3	10.22:Welding by gas or electric plant including transportation of plant at site etc. complete.
4	20.6.1.1:Vertical load testing of piles in accordance with IS 2911( Part IV) including installation of loading platform and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of engineer -in-Charge. Single pile upto 50 tonne capacityInitial test
5	4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
6	OD8102/2023-2024:Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to siteof laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work upto plinth level
7	OD8103/2023-2024:Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to siteof laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work above plinth level upto floor V level
8	5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
9	5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts
10	5.9.3:Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
11	5.11.1:Extra additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.5m, for every additional height of 1 metre or part thereof (Plan area to be measured).Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)
12	5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
13	2.25:Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
14	50.13.1:9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete
15	13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
16	13.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
17	16.90:Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.
18	56.1.a:Mobilization including transportation of all necessary plant and equipment"s and materials of boring, field testing and sampling and demobilization after completing the work - For machine boring
19	56.2.a:Setting up boring at each bore hole locations including carrying all necessary plant, equipment and materials of boring and field tests and collection of samples at each bore hole location - For machine boring.
20	56.3.a.1:Boring with rotary power drilling equipment"s in - all types of soil having N value less than 50 excluding hard rock, soft rock or medium rock for strata upto 10m including conducting necessary S.P.T and recovery of undisturbed soil samples at 5m intervals - For ordinary soil.
21	56.3.b.1:Boring with rotary power drilling equipment"s in - all types of soil having N value less than 50 excluding hard rock, soft rock or medium rock for strata next 10m and upto a depth of 20m including conducting necessary S.P.T and recovery of undisturbed soil samples at 5m intervals - For ordinary soil.
22	56.3.c.1:Boring with rotary power drilling equipment"s in - all types of soil having N value less than 50 excluding hard rock, soft rock or medium rock for strata next 10m and upto a depth of 30m including conducting necessary S.P.T and recovery of undisturbed soil samples at 5m intervals - For ordinary soil.
23	56.7:Conducting standard penetration test in bore hole at any depth.
24	15.2.1:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
25	5.26:Providing and filling in position, blow bitumen in expansion joints.
26	OD5864/2023-2024:based on 5.43.2 Providing and fixing in position Stainless steel Grade 304 Plate 1.0 mm thick as per design