}

Tender For Repair To Sa Firing Range, Plinth Protection, Brick Work, Approach Path And Plastering At Af Stn Kumbhirgram, kumbhirgram-Assam

Military Engineer Services-MES has published Tender For Repair To Sa Firing Range, Plinth Protection, Brick Work, Approach Path And Plastering At Af Stn Kumbhirgram. Submission Date for this Tender is 13-05-2024. Road Work Tenders in kumbhirgram Assam. Bidders can get complete Tender details and download the document.




Tender Notice

43265348
Tender For Repair To Sa Firing Range, Plinth Protection, Brick Work, Approach Path And Plastering At Af Stn Kumbhirgram
Open Tender
Indian
Assam
kumbhirgram
13-05-2024

Tender Details

Repair To Sa Firing Range, Plinth Protection, Brick Work, Approach Path And Plastering At Af Stn Kumbhirgram

Key Value

Document Fees
INR 500 /-
EMD
INR 19000.0 /-
Tender Value
INR 9.50 Lakhs /-

BOQ Items

Name of Work: REPAIR TO SA FIRING RANGE, PLINTH PROTECTION, BRICK WORK, APPROACH PATH AND PLASTERING AT AF STN KUMBHIRGRAM.
Sl. No. Item Description
1Material and labour two coats of synthetic enamel paint over a coat of red oxide primer toto new steel surface over 10cm in width or girth,not otherwise described as directed.
2Taking down cement plaster on brick or stone wall etc. incl. racking out joints, hacking to key, scrubbing down with water etc. complete all as directed.
3Material and labour for rendering 15 mm thickon fair faces of brick work or concrete surface in CM (1:4),and finishing surface even and smooth fair without using extra cement, with integral water proofing compound( Water proofing compound is used in only exterior 5mm plaster and used as per manufacturer instructions).
4Material and labour for rendering 10 mm thickon fair faces of brick work or concrete surfacein CM (1:6),and finishing surface even and smooth without using extra cementas specified and directed.
5Material and labour for preparation of newly plastered or unplastered surface of wall and applying two coats of weather coat paint(Cement based) including primer, complete all as specified and directed.
6Material and Labours for two coat of oil bound distemper over a coat of chalk whitening on newly plastered surfaces of walls incl. necessary preparation of surfacesall as specified and directed.
7Supply only integral water proofing compound ISI marked.
8Demolition of brick/stone masonary work built in cement mortar as in wall including all quoins, arches, pillars etc complete all as specified and as directed
9Materials and labour for brick work in cement mortar (1:6) with well burnt best quality locally available old size brick straight or curved on plan exc. 6 m mean radius complete all as specified and as directed.
10Material and labour for brick work withsub class "B" bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as directed.
11Demolition of cement concrete (un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and as directed.
12Material and labour for PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.
13Material and labour for PCC 1:2:4 type B1 using 20 mm graded stone agg. as in benching, pier caps, bed blocks etc. incl. necessary form work complete all as specified and as directed.
14Materials and labour for 50 mm thick PCC 1:3:6 type C2 using 40mmmm graded stone agg. as in plinth protection complete all as specified and as directed.
15Demolition of damaged RCC cover slab of any description as in septic tank, soak well, manhole and gully trap etc (including separating of reinforcement) and removal of debris to a distance n.exc. 50 mtrs and spreading complete all as specified and as directed.
16Materials and labour for for pre cast reinforced cement concrete 1:2:4 type B1 as in cover slab of manhole, septic tank soak well, gully trap etc. set in CM (1:4)complete all as specified and as directed.
17Supply and fixing of MS TMT bar 6 to 10 mm dia cut to length bent to shape required incl. cranking bending and hooking and binding with MS wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.
18Supply only sand for using in firing range stack of sand and saw dust mix complete all as specified and as directed.
19Supply only saw dust using in the mix for firing complete all as specified and as directed.
20Dismantling broken/unserviceable fencing posts or struts any section, including taking out embedded portion in natural ground and making good disturbed ground complete all as specifed and directed.
21All as per item No. 1 here-in-before but embedded in cement concrete complete all as specified and as directed.
22Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
23Excavating in post holes each n exc 0.5 cum , getting out in loose/ soft soil ,returning filling in and rammingearth or broken rubble mixed with earth around, in layers nt exc 25cm ,watering and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and as directed
24Supply and fix rolled mild steel as in angle or tee section, fixed independently with connecting base plate etc as in fencing post, strut bend to shape, holes drilled/notches cut to receive MS bolts and barbed wire, embedded to concrete including tarring to steel work embeded to concrete complete all as specified and directed.
25Supply and fix MSbars 10mm dia and over, cut to length,bent to shape required, including crankinbending spirallyu for hooping for columns, hooking ends and binding with and incl mildsteel wire annealed not less than0.9mm dia or securing with clips quality conforming to grade FE-410 all as specified and confirmed.
26Supply and fix Flat iron fillets for securing wire mesh etc including all necessary drilling ,bolting or riveting etc and similar work confirming to Fe290 Gde E-165,(40x5mm)All as specified and directed
27Supply and fix Mild Steel Screw bolts (machine made) with hexagonal or square heads at one end and screwed both ends,each screwed ends to be fitted with washers and one hexagonal or square nut, but length of bolt exc 22.5 cm bt n exc 30cm long, all as specified and directed
28Fixing only Chain link fencing including line wires , any mesh, size and type to any type of standards,rails,straining bolts etc including provision of binding wire, all as specified and as directed
29Supply only Chain Link MS galvanised fencing any size or type exc 4kg weight per sqm, all as specified and as directed
30Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thickness (below or above ground level)complete all as specified and directed.
31Material and labour for 50 mm thick cement concrete type B-2, 1:3:6 (using 40 mm graded stone aggregate) as in sub base floor,or in hard standing, finished even and rough complete all as specified and as directed.
32Materials and labour for pre polished chequered cement concrete tiles 30cm x 30cm x 20mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment with screed bed or bedding layer of cementmortar 1:6in 15 mm thick for laying floor finishes complete all as specified and as directed.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail