Military Engineer Services-MES has published Tender For Special Repairs To Security Fencing Towards South Eastern Boundary At Masimpur Military Station Under Ge Silchar. Submission Date for this Tender is 21-05-2024. Wire Fencing Tenders in Silchar Assam. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 14-May-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 21-05-2024 |
FileName | File Description | File Size |
1ac6339c-07e7-4716-891a-4a1a3353989c.html | Tender Notice | 0 KB |
BOQ_729367.xls | Tender Document | 0 KB |
Gensumm.pdf | Tender Document | 0 KB |
Schofcredit.pdf | Tender Document | 0 KB |
Tendernotice_1.pdf | Tender Document | 0 KB |
Tenderpages.pdf | Tender Document | 0 KB |
Sl. No. | Item Description |
1 | Excavating in post holes (or similar holes) each not exceeding 0.5cum, returning, filling in, getting out in soft / loose soil and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm and removing surplus soil to a distance not exceeding 50m complete all as specified and as directed |
2 | Excavation in trenchesnot exceeding 1.5m wide and not exceeding 1.5m in depth for foundations, manholes, etc. or for laying cables/pipes, erecting poles, etc. not exceeding 10sqm on plan and getting out in soft / loose soil complete all as specified and as directed |
3 | Returning, filling in, including, spreading, leveling, watering and well ramming in layers not exceeding 25cm deep as in any type of soil complete all as specified and as directed |
4 | Removing excavated materialsto a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point in any type of soil including spreading in low lying area and leveling complete all as specified and as directed |
5 | M&L for dismantling rusted / damaged fencing of any size / type from any height and disposing off complete all as specified and as directed |
6 | Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion (in natural ground/concrete/ masonry) and making good disturbed ground complete all as specified and as directed |
7 | M&L for mild steel TMT bars grade Fe-500D, 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed |
8 | M&L for mild steel TMT bars grade Fe-500D, 5mm dia and over upto 10mm dia, as in stirrups, spacers, etc. cut to length, bent to shape required including cranking, bending spirally for hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed |
9 | M&L for use and waste formwork to sides of foundations, bases of columns, rafts, raft beams, plinth beams and similar works, vertical or to batter, for rough finished flat surfaces of concrete complete all as specified and as directed |
10 | M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces complete all as specified and as directed |
11 | M&L RCC M 25 design mix as in foundations including rafts, footings, foundation beams, plinth beams, column footings, under reamed piles, mass concrete, etc. complete all as specified and as directed |
12 | M&L RCC M 25 designmix as in columns, pillars, posts, etc. complete all as specified and as directed |
13 | Notes for serial item Nos. 11 & 12: (a) Mix design shall be conforming to relevant IS. Design mix shall be got designed from National Test House, SEMT Wing CME, Regional Research labs, IITs, National Institutes of Technology, Command Test Laboratory and Govt Engineering Collage and shall be got approved by the GE. Cost of obtaining design mix shall be included in the quoted rates (b) The Contractor shall use only one type brand of cement for entire structural/reinforced concrete work. In the event of contractor desiring use of any different brand of cement, fresh design mix shall be carried out and submitted for approval without any extra cost to the Govt. (c) Reinforcement steel will be measured separately under respective items herein |
14 | M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregates) as in foundation filling, sub-bases, mass concrete, etc. complete all as specified and as directed |
15 | M&L for plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregates) as in foundation filling, sub-bases, mass concrete, etc. complete all as specified and as directed |
16 | S&F MS angle iron posts & struts in fencing including cutting top to shape,drilling holes, notching for wire including all necessary drilling bolts or rivetting & similar works conforming to Fe-290 grade E-165 for securing chain link fencing, etc. complete all as specified and as directed |
17 | Supply only chain link MS galvanised fencing, any size or type complete all as specified and as directed Note: Weight of chain link shall be ascertained by a BOO ordered by the GE |
18 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provisioning of binding wire complete all as specified and as directed |
19 | Supply only mild steel conforming to Fe-410W grade E-250 quality-A, round bars 10mm dia, cut to length, bent to shape required and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in tie rods to chain link fencing complete all as specified and as directed |
20 | S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed at both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exceeding 5cm in length, dia of neck & shank 10mm complete all as specified and as directed |
21 | S&F galvanised 2 strand, steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and including provision of galvanised mild steel wire, staples or steel pins, etc. including all necessary T&P, safety measures, staging, scaffolding, etc. to work at heights over security walls, etc. complete all as specified and as directed Note: Weight of barbed wire shall be ascertained by a BOO ordered by the GE |
22 | M&L for preparing of new steel / metal surfaces of any description exceeding 10cm in width or girth and applying two coats of synthetic enamel paint (tint as approved) complete all as specified and as directed |
23 | M&L for preparing of new steel / metal surfaces of any description not exceeding 10cm in width or girth and applying two coats of synthetic enamel paint (tint as approved) complete all as specified and as directed |
24 | M&L for dewatering of low lying areas / shallow ponds by pumping / lifting out water with suitable capacity pumps, clearing off manually and making localized earthen bunds with adjascent earth by inserting plain mild steel sheeting in ground and supporting with suitable wooden pegs to stop sliding of earth and making good after completion complete all as specified and as directed Notes: (a) The arrangement shall be suitable for works like fixing of fencing posts, casting of RCC columns/posts, including excavation, casting, formwork, casing of RCC column / foundation, erection of precast / MS posts, etc. (b) The arrangement shall be as directed and as approved by the GE (c) All encumbrances shall be included in the quoted rate |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail