Dakshinanchal Vidyut Vitran Nigam Limited-DVVNL has published Tender For The Electrification Work Of 03 No. Payjal Yojana At Vill. Pailani Dera, Amchauli, Nandadev Etc. Under Edd, Banda (Rural) - 1 The Following Works Under Various Places/Sub-Stations Under Full Deposit Scheme 2023-24 Under Edd, Banda (Rural), Inc. Submission Date for this Tender is 15-05-2024. Electrification Work Tenders in banda Uttar Pradesh. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 06-May-2024 | Date Extension Corrg.1 | Date | 10-05-2024 |
2 | 09-May-2024 | Date Extension Corrg.2 | Date | 15-05-2024 |
Sl. No. | Item Description |
1 | The following works under various places/Sub-Stations under FULL DEPOSIT SCHEME 2023-24 under EDD, BANDA (RURAL), including carriage of all required material from ESC Banda to work site, alongwith its loading, unloading & dragging at the respective ends and also safe carriage of old line material/scraped from site to store centre, if any. The bidder shall be responsible for complete execution of the work under the scope of tender specification. Any work/activity not specifically indicated but is required for systematic execution of job shall be carried out by the contractor without any extra payment. Details of the work as given below ;- |
2 | Erection of 11 KV Lines and 25 KVA Sub-Staions work - For electrification of Payjal Yojana at various places as PAILANI DERA, AMCHAULI & NANDADEV etc. |
3 | Safely cartage of following poles from ESC to site of work - |
4 | PCC Poles 8.5 Mtr. Long |
5 | Safely cartage of line material viz. conductor, cable, wire, x-arm, clamps, channels, angles, earthing rod, stay etc. |
6 | Erection of PCC Poles 8.5 Mtr. Long as SP with complete HT/LT fittings of all accessories as per direction of engineer incharge/RESSPO norms. |
7 | Erection of PCC Poles 8.5 Mtr. Long as DP/SDP with complete HT/LT fittings of all accessories as per direction of engineer incharge/RESSPO norms. |
8 | Laying, sagging, stringing, binding and jumpering ofACSR Weasel conductor on the newly erected poles with fitting of all related accessories as per direction of supervising engineer/RESSPO manual. |
9 | Safely cartage and installation of 25 KVA capacity transformers on double pole structure with loading and unloading on both sites in proper alignment as per direction of engineer incharge/RESSPO manual. |
10 | Erection of stay set complete at digging of pit including the cost of grouting with cement, sand and brick ballast/stone in ratio 1:4:8 as per RESSPO norms alongwith nozeling & binding of stay set, stay. |
11 | Fabrication of hole in channels/angles/steel cross arms. |
12 | Supply & erection of Nut-Bolts & washers of suitable size(Arranged by contractor at his own cost). |
13 | Concreting/grouting of newly erected single/double pole structure on 8.5 Mtr. PCC Poles asper direction of supervising engineer/RESSPO manual. The support shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 (0.285 Cu. Mtr. each), including the cost of arrangement of cement, sand, brick ballast/stone ballast, stone pad etc. as per actual sire requirement, including the cost of labour, T&P and carrier etc. required for proper completion of work. |
14 | Fixing of earthing rod as per direction of supervising engineer/RESSPO manual, including the cost of labour, T&P etc. required for proper completion of work. |
15 | Supply & Fixing of Top Channel with clamp & Nut-Bolts alongwith fitting of all accessories as per RESSPO manual (Arranged by contractor at his own cost). |
16 | Supply & Fixing of Dropper Channel with clamp & Nut-Bolts alongwith fitting of all accessories as per RESSPO manual (Arranged by contractor at his own cost). |
17 | Supply & Fixing of T-Off Channel with clamp & Nut-Bolts alongwith fitting of all accessories as per RESSPO manual (Arranged by contractor at his own cost). |
18 | Supply & Fixing of F-Bracket with Nut-Bolts for fitting top insulator as per RESSPO manual (Arranged by contractor at his own cost). |
19 | Supply & Fixing of X-arm holding clamp with Nut-Bolts as per RESSPO manual (Arranged by contractor at his own cost). |
20 | Supply & Fixing of MS Angle 75x75x6x2028 mm.(Base Angle) with Nut-Bolts as per RESSPO manual (Arranged by contractor at his own cost). |
21 | Supply & Fixing of Clamp for channels with Nut-Bolts as per RESSPO manual (Arranged by contractor at his own cost). |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail