Tender For Certain Sanction Works Under Ge (Af) Bamrauli, bamrauli-Uttar Pradesh

Tender For Certain Sanction Works Under Ge ( Af ) Bamrauli.; 1 M&L For Fabrication, Supply, Installation, Testing And Commissioning Cpri Approved Electrical Cubical Control Panel Board Factory Assembled Made Outdoor Type Feeder Pilar Box Double Door Type Wheather And Vermin Proof Fabricated Of 3.15 Mm Crca Ms Sheet Of Suitable Size, 3 Phase 4 Wire 415 V Ac 50Hz Complete Duly Painted With Powder Coating Complete With Locking Arrangement, Earthing Termimal With Suitable Rating Copper Strips For Incoming / Outgoing MccbS Including And Mounting Measuring Instrument Such As Volt Meter, Ammeter, Selector Switch, Cts Phase Indicator Lamp With Holder, Toggle Switches And Backelite Fuse Cut Outs Etc Including Incoming And Outgoing Cables Connections With Suitable Cable Glands And End Termination Including Grouting Of Feeder Pillar Box 60 Cm Above Ground Level By Providing 90 Cm Long Angle Iron Size 50X50x6mm Welded On All Four Corner Embedded In Pcc ( 1:2:4 ) Using 20Mm Graded Upto 30 Cm Complete All As Specified And Directed By The Engr-In-Charge ( Feeder Piller Box Shall Be Consisting The Following:- ) ( A ) High Conductivity Copper Busbar ( Set Of 4 Strips ) , 4 Nos Tpn Of Suitable For 1200 Amps Rating , ( Ryb ) For Phase And 1 No For Neutral Mounted On Dmc Support With Heat Shrink Sleeve-1 Set. ( B ) Phase Indication Lamp, Led Type ( Set Of 3 ) -1 Set. ( C ) Ammeter Digital Type Having Measuring Range ( 0-1500 ) Amps With Cts Etc Including Rotary Switchto Measureload Of Each Phase : L&T / Seimens. ( D ) Volt Meter Digital Type Having Measuring Range ( 0-1000 ) Volt To Measure Voltage Of Phase R.Y.B Make : L&T / Ae. ( E ) Grouting Of Panel Including Earth Work As Required Pcc ( 1:3:6 ) Type D-2 Using 20 Mm Gradeded Stone & Plastering With ( 1:4 ) Cement Sandetc Complete. ( F ) Incomming: Acb 4 Pole 800 Amp Manual Drawout Type With Icu=Ics=Icw ( 1S ) =50 Ka, In Built Temperature Protection, Incomming Cotrol Device :01 Nos. ( G ) Outgoing: Mccb 4 Pole 400 Amp 415 Voltthermal Adjustable Type With 36 Ka Breaking Capacity & Spreader Both Side As Outgoing Cotrol Device :03 Nos. 2 Supply , Laying, Jointing And Testing ( In Replacement ) Of Undergroundlt Cable Xlpe Insulated, Screened Pvc Bedded , Galvanised Steel Strip Or Wire Armoured Electric Power Cables ( Heavy Duty ) 1100 Volts Grade With Stranded Aluminium Conductor Of Size 300 Sqmm 3.5 Core Laid In Trenches / Ducts / Along Poles / Through Pipe Under Road Etcall As Specified And Directed By Engr-In-Charge 3 Excavation In Trenches Not Exceding 1.5M Wide And Noe Exceding 1.0 Sq M On Plan And Not Exceding 1.5M Depth And Getting Out Soft Soil All As Specified And Directed 4 Returing Filling In Including Spreading Leveling Watering And Well Ramming In Layer Not Exceding 25 Cm As In Soil All As Specified And Dirceted All As Specified And Directed 5 Removing Excavated Material Not Exceding 50 M And Depostingwhere Directed At A Level Not Exceding 1.5 M Above The Starting Pointall As Specified And Directed 6 M & L For Sand Cushioning All Around The Cable For Protection By Natural Sand All As Specified And Directed 7 Supplying And Laying Old Size Bricks Of Size 230Mm X 113 Mm X 75 Mm For Cable Protection All As Specified And Directed 8 M&L For Earthing Complete With Galvanized Steel Earth Plate Electrode 60 Cm X 60Cmx 6.3Mm Thick Buried Direcly In Ground Vertically To A Depth Not Less Than 2.25 Meters Below Normal Ground Lev El With The Top Edge Of Earth Plate Not Less Than 1.5 Meters Below Ground Level Connected To Galvanized Iron Strip 32 X 6 Mm By Means Of Bolts, Nuts, Check Nuts And Washers Made Out Of Galvanised Iron Or Steel All As Shown In Electrical Plate No.5 Of Ssr Part I And Earth Wire Protected By Galvanized Pipe Light Grade 40Mm Bore And Thorugh Test Point Including Necessary Earth Work And Excavation In Any Type Of Strata, Gi Light Grade 20Mm Bore Watering Pipe With Funnel And Wire Mesh, Pcc 1:2:4 Type B1 Chember With 40Mm Thick Rcc 1:2:4 Type B1 Design Mix Cover Slab With 6Mm Dia Ms Bars At 100Mm C / C Both Ways With Ms Hook 6Mm Dia Ms Bars Etc Complete All As Specified And Directed And Testing On Completion. Notes : ( I ) The Concrete Pit Shall Be Made In Pcc 1:3:6 Type C-1, Using 20Mm Graded Crushed Stone Aggregate 40Mm Thick Precast Cover Slabof Rcc ( 1:2:4 ) , Type B-1, Using 20Mm Graded Crushed Stone Aggregate With Suitable Ms Handle In Lieu Of Ci Cover. ( Ii ) Item Includes The Cost Of 7.5 Metre Gi Pipe For Protection Of Earth Strip. Any Variation In Length Shall Be Adjusted Through Deviation Order ( Iii ) Items Includes Cost Of 7.5 Metre Earth Lead Strip. Any Variation In Length Shall Be Adjusted Through Deviation Order. ( Iv ) Earth Electrode Shall Be Surrounded By Adequate Quantity Of Charcoal Dust And Salt To A Packed Thickness Of 15 Cm On All Sides 9 Excavation In Hard Standing For Crossing The Road As Per The Authorized Width For Taking Out / Laying / Cleaning / Repairingof Ci / Gi Pipe Lines All As Directed Including Making Good The Road Cut To Match With The Existing Surface Either With Bituminous Macadam Or With Pcc 1:2:4, Type B-2 ( Using 40Mm Graded Crushed Stone Aggregate ) Complete All As Specified And Directed. 10 Taking Up Unserviceable Ci Rusted / Broken Pipe Line ( Including All Fittings ) With Spigot And Socket / Flanged Ends And Removal From Site Including Burning Out Joints And Recovering Lead Complete All As Specified And Directed For The Following Sizes / Bores Of Pipes :- ( Earth Work Shall Be Measured And Paid Separately ) . 11 ( A ) 150Mm Bore Dia 12 Supply & Laying In Trenches Ductile Iron ( Di ) Pipe With Spigot And Socketed Ends Centrifugally Cast Class K-7 In Any Length Laid In Trenches Complete All As Specified And Directed For The Following Sizes / Bore Of Pipes ( Di Fittings And Jointing Materials Shall Be Measured And Paid Separately ) :- 13 ( A ) 150 Mm Bore Dia 14 M&L For Cutting Ofthe Ci / Di Pipe In Position For Insert Of New Tee, Branches Such As Tees / Reducers / Tail Pieces / Collers / Sluice Valve / Air Release Valve Etc.With Suitable Size Of Clamp Of Size 40 X 6 Mm With Nuts, Bolts And Washer Of The Following Sizes Complete All As Specified And Directed:- 15 ( A ) 150 Mm Bore 16 M&L For Rubber Gasket Joint Suitable For Di Pipe And Fittings Withsize Of Nuts, Washer & Bolts Etccomplete All As Specified And Directed Forthe Following Sizes :- 17 ( A ) 150 Mm Bore 18 M&L For Upto 150 Mm Bore Ductileiron ( Di ) Fittings Such As Bends ( Any Type, Radius And Angle ) Tapers Any Type, ( Straight, Bend, Increasing, Decreasing Or Double Socket Etc ) Tee Pieces Single Branch, “Y” Junction, Double Branch, Cross ( All Sockets Or Socket And Spigot ) Collars, Flanged Spigot, Caps And Plugs Complete All As Specified And Directed. 19 Supply, Fixing, Jointing And Testing In Repair Of Cast Iron Sluice Valve Class I ( Isi Marked ) Pn-1.6 Typelatest Is 14846-2000 Flanged Ends, Drilled Having Stainless Steelspindle With Cast Iron Wheel Head At Top Complete With Nuts, Bolts, Washer And Rubber Gasket Etc Complete Including Taking Down Unserviceable Sluice Valve Completeall As Specified And Directed For Following Bore Of Ci Pipe Line :- 20 ( A ) 150 Mm Dia Bore 21 Dismantling Old Broken / Damaged Valve Pit Chamberand Construct Valve Pitchamber Of Size 1050Mm X 1050 Mm X 1050 Mm ( Internal Dimention ) Complete Including Excavation And Earth Work, Pcc 1:4:8, Type D-2 Using 40Mm Graded Stone Aggregate, Brick Work In Cement Mortar 1:6, Plastering In Cement Mortar 1:4 ( Internally ) And Including 3Mm Thick Mild Steel Sheet Cover And Painting With Two Coat Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer Complete All As Specified And Directed. 22 Supply , Laying, Jointing And Testingin Replacement Of Undergroundlt Cable Xlpe Insulated , Screened Pvc Bedded , Galvanised Steel Strip Or Wire Armoured Electric Power Cables ( Heavy Duty ) 1100 Volts Grade With Stranded Aluminium Conductor Of Size 16 Sqmm 4 Core Laid In Trenches / Ducts / Along Poles / Through Pipe Under Road Etcall As Specified And Directed By Engr-In-Charge 23 Supply , Laying, Jointing And Testingin Replacement Of Undergroundlt Cable Xlpe Insulated , Screened Pvc Bedded , Galvanised Steel Strip Or Wire Armoured Electric Power Cables ( Heavy Duty ) 1100 Volts Grade With Stranded Aluminium Conductor Of Size 25 Sqmm4 Core Laid In Trenches / Ducts / Along Poles / Through Pipe Under Road Etcall As Specified And Directed By Engr-In-Charge 24 Supply , Laying, Jointing And Testingin Replacement Of Undergroundlt Cable Xlpe Insulated , Screened Pvc Bedded , Galvanised Steel Strip Or Wire Armoured Electric Power Cables ( Heavy Duty ) 1100 Volts Grade With Stranded Aluminium Conductor Of Size 50 Sqmm 3.5 Core Laid In Trenches / Ducts / Along Poles / Through Pipe Under Road Etcall As Specified And Directed By Engr-In-Charge 25 Supply , Laying, Jointing And Testingin Replacement Of Undergroundlt Cable Xlpe Insulated , Screened Pvc Bedded , Galvanised Steel Strip Or Wire Armoured Electric Power Cables ( Heavy Duty ) 1100 Volts Grade With Stranded Aluminium Conductor Of Size 70 Sqmm 3.5 Core Laid In Trenches / Ducts / Along Poles / Through Pipe Under Road Etcall As Specified And Directed By Engr-In-Charge 26 M & L For Busbar Chamber Box Of 1.6 Mm Sheet With Tinned Plated 04 Nos Copper Bars Of Following Bus Bar And Following Box Size, Factory Made, Suitable For Pole / Wall Mounted Including All Connections With Aluminum Strips / Lugs, Glands To Be Provided At Cable Entries, Powder Coated Paint Complete For The Following Rating:- 27 Bus Bar Of Rating 100 Amp 28 Bus Bar Of Rating 200 Amp 29 Bus Bar Of Rating 300 Amp 30 S&Fsuitable Size Of Sheet Metal Enclosure With Mccb 4 Pole, 415 Volts, Connection By Using Aluminum Lugs And Making Arrangement To Fix / Hang On Wall Complete All As Specified And Directed By Engr-In-Charge For The Following Capacity / Rating:- 31 200 Amp Rating, 36 Ka Breaking Capacity With Adjustable Magnetic Setting With Both Sidespreader For Cable Connection 32 315 Amp Rating, 36 Ka Breaking Capacity With Adjustable Magnetic Setting With Both Sidespreader For Cable Connection 33 Supply And Laying Or Fixing Or Passing Through Pipe, 1100 Volts Grade Heavy Duty Cable With Pvc Insulated Aluminium Conductor Served With An Inner Sheathing Of Pvc Tape Armoured With Galvanised Steel Wire Or Tape And Overall Pvc Sheathed 4 Sq. Mm Nominal Cross Section, 2 Corein Service Connections Etcall As Specified And Directed By Engr-In-Charge 34 Supply And Laying Or Fixing Or Passing Through Pipe, 1100 Volts Grade Heavy Duty Cable With Pvc Insulated Aluminium Conductor Served With An Inner Sheathing Of Pvc Tape Armoured With Galvanised Steel Wire Or Tape And Overall Pvc Sheathed 10 Sq. Mm Nominal Cross Section, 2 Core In Service Connections Etcall As Specified And Directed By Engr-In-Charge 35 S&F Switch Socket Outlet Multipurpose 3 Pin, 16 Amp And One Pin, 6 Amp Controlled By One Switch With Pvc Box Etcall As Specified And Directed By Engr-In-Charge 36 M&L For Excavation In Trenches By Cutting / Removal Of Interlocking Tiles / Pcc / Hard Standing For Laying Of Pipe Including Making Good The Existing Surface With Pcc / Refixed Interlocking Tiles To Match The Original Finish All As Specified And Directed. 37 Supply And Lay Steel Water Tubing Gi Pipe 40Mm Light Grade Isi Marked With All Fittings Laid In Trenches Or Fixed To Wall Etc Complete All As Specified. 38 Supply, Fixing, Testing And Commissioning Of Open Well Submersible Pump 10 Hp ( 7.5Kw ) , 3 Phase, 415 Volts, 50 Hz, Head Range 15 To 33 Mtr, 1500Lpm, Outlet Of 80Mm, Complete All As Specified And Directed. 39 Supply, Fixing, Testing And Commissioning Of Mu 10H Automatic Dol Starter ( With Sz5 Sppr ) , Suitable For Pump / Motor 3 Phase, 415 Volts, 50 Hz, Relay Range 15-25 Amp, Including Suitable Size Lt Panel, Outdoor Type, For Mounting / Fixing The Pump Controller, Cubical Compartmentalised Of 2Mm Thick Crca Sheet Powder Coated Front Door Openable With Angle Iron 45X45x5 Mm Frame Bottom Of The Panel Board, Grouted By Using Pcc Foundation 1:2:4 Type C1 With 20 Mm Graded Stone Aggregate, Thimbling And Cable Entry Boxes With Cable Gland Inculding Painting With Two Coat Of Powder Coated Paintingover A Coat Of Red Oxide Primercomplete All Specified And Directed. Note : 1. The Cost Of Fabrication Complete And Pcc Work Complete Are Incuded In Quoted Rate And No Extra Payment Will Be Made For Them. 40 S&F In Replacement Of Pvc Insulated Flat Copper Submersible Cable 4 Sqmm, Heavy Duty, 3 Core 1100 Volt Grade Of The Following Size Complete All As Specified And Directed. Make - Havells / Plaza / Finolex - 41 Supply And Lay Steel Water Tubing Gi Medium 80Mm Grade Isi Marked With All Fittings Laid In Trenches Or Fixed To Wall Etc Complete All As Specified.Make: Jindal / Prakash / Swastik Note :- Excavation And Earth Work Will Be Measured And Paid Separately. 42 M&L For Fabrication And S&F Rain Water Shelter Cubical Compartmentilzed Outdoor Type Suitable For Monoblock Pump Set Including Starter, Verically Enclosed With Pgi Sheet Having One Door For Opening / Closing The Enclosure, Also Having Workable Space For Connection / Disconnecting Of Monoblock Pump Motor Including Pcc / Cement Work As Required At Site 43 Supply, Fixing, Jointing And Testingcast Iron Non Return Valve Of 80Mm Dia Flanged Ends As Per Is-5312 ( Isi Marked ) Complete With Washer Nuts / Bolts And Rubber Gasket Complete `All As Specified And Directed. 44 M&L For Earthing Complete With Galvanised Earth Plate Electrode 600X600x6mm Thick Buried Directly In Ground ( Earth ) Pit Not Less Than 2.25 Mtr Deep Below Ground Level ) With Top Edge Of The Plate Not Less Than 1.5 Meters Below Normal Ground Level Connected To Galvanised Iron Strip 25X4mm As Earthing Lead By Means Of Bolts, Nuts, Check-Nuts And Washers Of Galvanised Iron Or Steel Besides Welding At All Joints As Shown In Drawings And Including Excavation And Earth Work, Gi Pipe Light Grade 40Mm Bore For Protection Of Gi Strip From Earth Electrode To And Including The Earth Test Point Of Galvanised Iron / Steel Of Size 75Mm X 75Mm X 25Mm, Supplying And Laying Charcoal Stone Aggregate ) Chamber And Mild Steel Angle Iron Frame 40X40x3mm And Rcc Cover 40Mm Thick ( 1:2:4 ) Type B-1 Using 20Mm Graded Crushed Stone Aggregate Reinforced With 8Mm Dia Tmt Bars @ 75Mm O / O Both Ways With Mild Steel Handle 12Mm Dia, Pgi Funnel With Wire Mesh, 20 Mm Dia Gi Pipe Light Grade For Watering All As Shownin Electrical Plate No.3 Of Mes Ssr Part - 1 45 Supply, Install, Testing And Commissioning Ofout Door Type Cubical Panel Board Of Size 900Mm X 600Mmx 300Mm Outer Shell Made Out Of3.15 Mm Thick Ms Sheet And Inner Shell Made Out Of 1.6 Mm Thick Ms Sheet And Ms Angle Iron Section 50X50x6 Mm Mounted On Pcc 1:2:4 Type B-1 Platform 60 Cm Aboveand 30 Cm Below The Ground Level, Frame Factory Fabricated With Front Openable Double Door System ( Each Door Hinged With Body At 2 Places With Body And Hinges Should Be Welded With Body And Door ) Lockable / Openable By Keyshaving Chromium Plated 19 Mm Dia Fancy Lock, “U” Type Gasket Shall Be Used To Make The Outer Shell Completely Dust / Vermin Proof Suitable For 3 Phase 4 Wire 415 Volt, 50 Hz With Suitable Gasket To Make It Dust / Vermin Proof And General Construction Complete All As Specified And Directed By Engineer-In-Charge. Confirming To Is:8623 / 93 And Comprising Of The Following :-Bus Bar System - Aluminium Main Bus Bar Duly Colour Coded With Pvc Sleeves 4 Pole Of Capacity 160 Amp Capacity.Incomer - Mccb 100 Amp, 4 Pole, 25 Ka, Ics = 100% Icu, With Adjustable Thermal Magnetic Setting Alongwith Spreader Terminals – 01 No Make : L&T / Hpl / Havellls.Outgoing - ( A ) Mccb 63 Amp, 4 Pole, 25 Ka, Ics = 100% Icu, With Adjustable Thermal Magnetic Setting Alongwith Spreader Terminals - 01 No Make : L&T / Hpl / Havells. ( B ) Mcb 63 Amp, Tpn, C Curve, 10 Ka - 02 Nos Make : L&T / Havells. ( C ) Digital Volt Meter 0 To 500 Volt Ac Of Size 96Mm X 96Mm With Inbuilt Selector Switch - 1 No Make : L&T / Hpl / Schneider Elect. ( D ) Digital Amp Meter 0 To 300 Amp Of Size 96Mm X 96Mm With Inbuilt Selector Switch And CtS Of 200 / 5 Ctr - 1 No Make : L&T / Hpl / Schneider Elect. 46 M&L For 100 Mm Thick Plain Cement 1:4:8 Type D-2 ( Using 40 Mm Stone Agregate ) As In Foundation Including Rafts, Footing, Foundation Beam, Plinth Beam Base For Column Etc Basemen Slabs Under Reamed Piles And Mass Concrete Etc Complete All As Specified And Directed.Base Of Floors Complete All As Specified And Directed. 47 M&L For Pcc B-1 ( 1:2:4 ) Nominal Mix Using 20 Mm Graded Stone Aggregate In Slabs Supported Walls Beam And Columns In Floor Landing Shelves Etc Complete All As Specified And Directed. 48 M&L For Formwork To Sides And Slffites Of Floors Or Roof Beam Haunching, Girders, Bressummers, Lintels, Cantilevers, Shelves Including Support Overchanges Etc Also Splays Between Floors And Beams Etc For Fair Finish Complete All As Specified And Directed. 49 M&L For Tmt Bars 10 Mm Dia And Over, Cut To Length Bent To Shape Required Including Cranking, Bending Spirally For Hooping For Columns, Hooking Ends And Binding With And Including Mild Steel Wire ( Anneated ) Not Less Than 0.9 Mm Dia Or Securing With Clips 50 All As Per Item No 39 Above But 5 Mm Dia And Over Upto & Incl 10 Mm Dia As In Stirrups Complete All As Specified And Directed. 51 Taking Down Chowkats Or Frames With Shutter Not Exceeding 1.5 Sqm Each ( Without Taking Off Shutters From The Frames ) 52 Taking Down Chowkats Or Frames With Shutter Exceeding1.5 Sqm But Not Exceeding 4 Sqm Each ( Without Taking Off Shutters From The Frames ) 53 S & F Solid Pvc Door Frame Of Size 50Mm X 47Mm Made Out Of 5Mm Single Side Prelam Pvc Sheet & Edges Will Be Painted To Match With Prelam Sheet, Reinforced With M.S. Square Tube Andfixing In Opening As Per Specification & Drawing Complete All As Specified And As Directed By The Engineer-In-Charge 54 M&L For Factory Made Solid Panel Pvc Door Shutter 30 Mm Thick ( Style ) Consisting Of Frame Made Out Of M.S. Tubes For Top & Bottom Rails. M.S. Frame Shall Be Covered With Heat Moulded Plain Colour Pvc ‘C’ Channel Having A Pvc Sheet Strip Of 20Mm Width Stuck Inside With Solvent Cement For Stiles And Plain Colour Pvc Sheets For Top Rail, Lock Rail & Bottom Rail On Either Side & As Gap Insert For Top Rail & Bottom Rail; Panelling Of Plain Colour Pvc Sheet To Be Fitted In The M.S. Frame Welded / Sealed To The Stiles & Rails With Suitable Pvc Sheet Beading, And Joined Together With Solvent Cement, Suppling & Fixing In The Frame At Site As Per Specification & Drawing. 55 S&F Steel Ventilator With Top Hung Shutter Including Hinges, Steel Peg Stay Etc, Complete All As Specified. 56 Supply Only 3Mm Thick Sheet Glass Ordinary Quality Glazing With Oil Putty In Metal Or Wooden Beads In Square N Exc 0.5 Sqm In Each Pane All As Specified And Directed. 57 M&L For Mild Steel Work In Bands Straps, Including Bolts As In Holdfasts And Similar Articles Conforming To Fe-310-0, Fe-410-0 Complete All As Specified And Directed. 58 S & F 100 Mm But Hinges, Medium Weight Cold Rolled Mild Steel And Fixed. 59 S & F 250 Mm Long Aluminium Alloy, Anodised Sliding Door Bolt With Hasp, Staple ( Bolt Type ) And Fixing Clips Of Sheet, Cast Or Extruded Section And Fixing Bolts And Sliding Bolts Of Extruded Sections Or Cast Aluminium Alloy. 60 S & F 200 Mm Long Aluminium, Anodised, Barrel Tower Bolts Of Extruded Section 61 S & F 150 Mm Long Extruded Aluminium Alloy Handles, Fabricated Type, Anodised. 62 M&L For Preparing Old Or Previously Untreated Steel Surfaces Of Any Description Not Otherwise Describedover 10 Cm Width Or Girth And Applying One Coat Of Synthetic Enamel Paint Etccomplete All As Specified And Directed. 63 Demolition Of Brickwork Built In Cement Or Cement Lime Mortar Complete. 64 M&L For Brick Work With Sub Class ‘B’ Old Size Bricks, Straight Or Curved On Plan Exceeding 6M Mean Radius, Built In Cement Mortar 1:6 Complete. 65 Dismantling Floor Hearth Or Wall Tilling Including Cement Mortar Bedding , Removing Serviceable Tiles To Stack And Rubbish Off The Premises For Minor Repair To Floor Tiles / Nahani Traps And Repair To Concealedstop Cock And Gi Tubing In Wall Etc In Patches. Complete. 66 M&L Fornon Skid Ceramic Tilescoloured 8 To 10 Mm Thick ( Square / Rectagular ) Area Of Each Tile Exceeding 0.18 Sqm But Not Exceeding 0.38 Sqm In Floors Etc. Setand Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Including 15Mmthick Screed Bed Layer In Cm ( 1:6 ) For Lying Floor Finish Etc Complete. 67 M&L For Glazed Ceramic Coloured Tiles In Vertical Surface 450X 350X7 Mmthick Tiles Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Matchthe Shade Tile Over And Inclduing 10Mm Thick Rendering In Cm ( 1:4 ) Complete Etc Complete All As Specified. 68 S&F In Repair New Beveled Edged Looking Mirror Of Size 600Mmx450mmof Selected Quality Glass Mounted With Ss Studs Complete All As Specified And Directed 69 S&F Plastic Water Closet Seat, Black, Closed Pattern With Flat Bottom, And Cover And Mild Steel Chromium Plated Or Aluminised Hinging Device Complete. 70 S&Fin Repair Pvc Low Level Flushing Cistern 10 Litres Capacity, White, With All Fitting And Fixtures Including Brackets And 32 Mm Bore Pvc Flush Pipe, Complete. 71 S&F In Repair Pvc Connections 15Mm Size With Ptmt Nuts Of Length 600Mm Complete. 72 S&F In Repair Pvc ( Swr ) Floor Trap, Plain With Grating Including Jointing With Solvent Cement, Dia Of Outlet 75 Mm Complete. 73 S&F ( In Repair ) Vitreous China Wash Down Water Closet ( Pedestal Pattern ) White ( Excluding Flushing Cistern And Flush Pipe ) And P Or S Trap Including Connection To Drain ( Or Outgoing Pipe ) And To Flushing Pipe Anti-Syphonage Pipe Etc Complete All As Specified And Directed. Including Plastic Water Closetseat Closed Pattern With Flat Bottom And Cover And Mild Steel Chromiunm Plated Or Aluminum Hinging Device. 74 S&F In Repair Health Faucet ( Abs Body ) Mild Steel Chromium Plated Suitable For 15 Mm Dia Pipe With 1.25 Metre Long Flexible Tube And Abs Wall Hook Including Making Connections And Fixed In Position Complete. 75 S&F ( In Repair ) Vitreous China Wash Hand Basin, White, Flat Back, Size 580 X 450Mm Excluding Taps, Waste, Chain And Plug And Porcelain Stopper Butincluding Pvc Connection Pipe Of 450Mm Length, Waste Coupling Of 32Mm Dia Of Ptmt, Msbrackets Including Cutting For And Pining In Ends Of Bracketscomplete. 76 S&F In Repair Mild Steel Angle Iron Bracket With 25X25x3mm Angle Iron For Whb Including Refixing Of Whb, Steel Painting And Making Good Disturbed Surface Complete. 77 S&F In Repair Bib Taps Cast Copper Alloy Chromium Plated ( Isi Marked ) With Crutch Or Butterfly Handle, Fancy Type, Screwed Down, Screwed For Iron Pipe Or For Brass Ferrule 15Mm Bore Complete. 78 S&F In Repair15 Mm Fancy Type Stop Valves, Castcopper Alloy, Screwed Down, High Pressure, With Crutch Or Butterfly Handle, Screwed Both Ends For Iron Pipe Or For Unions And Fixed All As Specified And Directed 79 M & L For Taking Down Cement Plaster On Brick Work Or Concrete Surfaces Incl Racking Out Joints, Hacking For Key Scrubbing Down With Water Etc And Rendering 10 Mm Thick In Ready Mix Cement Plaster 1: 4 On Fair Faces Of Brick Masonary Or Concrete Surfaces Of Wallsmixed With Water Proofing Compound ( Isi Marked ) @ 3% By Weight Of Cement Or As Per Manufacturer Instructions, Finished Even And Fair Complete All As Specified And Directed After Applying One Coat Of Smart Care Damp Guard / Block 2K Of Make :- Asian Paints / Dr. Fixit Or Equivalent As Approved By Ge. 80 S&F Soap Dish, Vitreous China White, Approximate Size 160X 160X90mmfixed To Plugs With Chromium Plated Brass Screws Complete. 81 Taking Down Pvc Soil, Waste And Rain Water Pipes ( Any Size Or Pattern ) Including All Fittings, Heads, Shoes, Bends, Swan-Necks, Bends Etc. Complete. 82 S&F In Repair 110 Mm Dia Pvc ( Swr ) Rain Water Pipes, Single Socketed, Fixed To Walls With And Including Ms Clamps Complete. 83 S&Fin Repair 75 Mm Dia Pvc ( Swr ) Rain Water Pipes, Single Socketed, Fixed To Walls With And Including Ms Clamps Complete. 84 S&F In Repair 110Mm Pvc ( Swr ) Bends Of Any Radius Complete. 85 S&F In Repair 75Mm Pvc ( Swr ) Bends Of Any Radius Complete. 86 S&F In Repair 110Mm Pvc ( Swr ) Junction Single T Equal Or Unequal With Acccessible Doorcomplete. 87 S&F In Repair 110Mm Pvc ( Swr ) Vent Cowlcomplete. 88 S&F In Repair 75Mm Pvc ( Swr ) Vent Cowlcomplete. 89 S&F Tubular Towel Rail 20Mm Dia, 600Mm Long Of Brass, Chromium Plated Complete. 90 M&L For Complete Removal Of Existing Treatment On Walls ( Any Number Of Layers ) By Scrapping With Steel Scrappers Or Any Other Means, Applying Two Coats Of Distemper, Oil Emulsion White Or Tinted Over And Including One 2Mm Thick Wall Care Putty Complete. 91 Taking Up Or Down 15 Mm Dia Steel Tubing And Connections Including Cleaning For Refixing Or Removal To Store Complete. 92 S&F 15 Mm Bore Galvanised Steel Water Tubing Medium Grade With All Fittings And Fixed To Walls, Ceiling Or Laid In Floors Etc. Complete All As Specified And Directed. 93 Taking Up Or Down 20 Mm Dia Steel Tubing And Connections Including Cleaning For Refixing Or Removal To Store Complete. 94 S&F 20 Mm Bore Galvanised Steel Water Tubing Medium Grade With All Fittings And Fixed To Walls, Ceiling Or Laid In Floors Etc. Complete All As Specified And Directed. 95 S&F Mild Steel Chromium Plated Grating 100 Mm Dia, Fixed In Repairs To Nahani Traps Complete. 96 S&F Mild Steel Chromium Plated Grating 125 Mm Dia, Fixed In Repairs To Nahani Traps Complete. 97 Taking Down Cement Or Cement Lime Plaster, Any Description, On Brick Or Stone Walls, Etc Including Raking Out Joints, Hacking For Key, Scrubbing Down With Water Etc Complete. 98 M&L For Rendering 15Mm Thick In Cement Mortar 1:6 On Faces Of Brick Work Or Concrete Surfaces, Finished Fair And Even Complete. 99 M&L For Rendering 15Mm Thick In Cement Mortar 1:4 On Faces Of Brick Work Or Concrete Surfaces, Finished Fair And Even Complete. 100 M&L For Rendering 10 Mm Thick In Cement Mortar 1:3 On Concrete Surfaces In Ceiling, Finished Fair & Even Complete. 101 M&L For Preparing New Plastered Or Unplastered Surfaces Of Walls And Applying Two Coats Of Distemper Oil Emulsion With Roller Brush, White Or Tinted Over & Including Alkali-Resistant Cement Primer Complete. 102 M&L For Preparing New Plastered Or Unplastered Surfaces Of Ceiling And Applying Three Coats Of White Wash Complete. 103 M&L For Preparing New Plastered Or Unplastered Surfaces Of Walls And Applying Two Coats Of Cement Paint White Or Tinted With Roller Brush Over & Including A Coat Of Cement Wash With White Cement Complete. 104 S&F Rotational Moulded Polythenewater Storage Tanks, Hoisted And Fixed In Position 500 Ltrs Capacity Including 2 Nos Gi Union, Checked Nut And 25Mm Ptmt Float Valve, Overflow And Washout Gi Medium Grade Pipe 15Mm Dia, Nippulecomplete All As Specified And Directed Including Dismantling Of Old Pvc Tank And Removing To Store 105 Taking Down Carefully Aluminium Battenpoint, Wiring For Light / Fan / Socket / Bell Or Power Point Including. All Fittings I.E. Switch, Sockets, Ceiling Rose, Regulators, Batten Holders, Etc. Complete And Making Good Disturbed Surfaces Of Wall / Floor To Match With The Surroundings Of Wall / Ceiling / Floor Etc Including Taking Down Old Light Fittings. Note :- ( I ) Contractors Quoted Rate Of This Item Deemed Inclusive Of Unscrewing Of The Serviceable Fittings And Fixture As Directed And Deposit In Mes Store Yard. ( Ii ) Quoted Rate Also Deem To Be Included Cost Of Cutting Chases For Taking Out Concealed Conduit And Nitch For Terminal Box. ( Iii ) Decision Of Ge Shall Be Final And Binding In Respect Of Serviceability Of Fittings / Fixture. 106 M & L For Point Wiring Complete With 1.5 Sqmm Single Core Pvc Insulated Frls Cable 1100 Volts Grade With Multi Stranded Copper Conductor Drawn Through New Pvc Concealed Conduit Mediem Grade, Isi Markedand Including Provision Of 1.5 Sqmm Pvc Insulated Copper Cable Frls As Earth Continuty, Fabricated Branded Modular Metal Flush Box Duly Make Embossed, Concealed In Walls With Suitable Modular Inner And Outer Plate For Housing Switches, Socket Outlet And Fan Regulators Etc, Complete All As Specified And As Directed For The Followings:- 107 ( A ) One Light / Fan / Bellpoint Controlled By One Switch Single Pole One Way 108 ( B ) All As Per Item No 96Here-In-Before Butone3 Pin 6 Amp Switch Socket Out Let Independent . 109 ( C ) All As Per Item No 96 Here Inbefore But One 3 Pin 6 Amps Socket Outlet On The Same Board With Other Switch Complete . 110 All As Per Item No 96 Here-In-Before But Using 02 Nos. 4.0 Sq Mm Size For Main Cable And 01 No.2.5 Sq Mm Size As Earth Conductor For One 16 Amp Switch Socket Outlet On Independent Board. 111 S&F Switch Modular Flush 10A Single Pole One Way Isi Marked 112 S&F Modular Sockets 10 Amp 2 In 1 2 / 3 Pin Combined All As Specified And Directed. 113 S&F Switch Modular Flush Type 15 / 16 Amp Single Pole One Way 240 Volt One Module Isi Marked 114 S&F Modular Sockets 16Amp 2 In 1 3 / 5Pin Combined All As Specified And Directed. 115 S&F Ceiling Rose Surface Bakelite 60X25mm Three Terminal 116 S&F Led Lights Fitting 1X 20W, 220V, Ac Decorative Box Type With Driver, Holder Including Led Tube Light Connecting Up With Three Core Flexible Copper Conductor Cable Of Suitable Size From Ceiling Rose Complete. 117 S&F Led Batten Extruded Surface Mountingfitting 2 Feet Long Aluminium Housing 10 Wattinput Voltage 220 Volt Inbuilt Led And Driver Complete All As Specified And As Directed. 118 S&F Ventilating Fan250 Mm Sweep, 1250 Rpm, Non Metallic Resin Body, Single Phase 240 Volts Ac 50 Hzand Connecting Up Complete Including Louvers And Provision Of Making Holes And Copper Cable 3 Core Of Size 0.5 Sqmm For Connection From Ceiling Rose To Fan Completeall As Specified And As Directed. 119 S & F Of Exhaust Fan 300 Mm ( Metal Body ) Sweep Complete With Louvers Including Connecting With Suitable Size Of Copper Conductor From Ceiling Rose To Fan Complete All As Specified And Directed. 120 S&F Led 2 X 2 Ft Backlite Surface Mounted Fitting 36 Wattsnot Less Than 3200Lm With Metallic Crca Powder Coated Body With High Efficiency Opal / Pmma Diffuser With System Efficacy > 80 Lm / W, Cri>80, Color Temperature >5700K, Ip 20, Power Factor<0.95, Thd<10%, 50000 Burning Hours , Ambient Temperature 0 To 500 Degc, Driver Should Meet Iec Complaint For Safety, With Voltage Variation Range Of 150-270 V And Surge Protection Of 2.5 Kv Including Necessary Fixing Arrangementsfixed Completeallas Specified And Directed. 121 S&F Led Street Light Fitting 35 Watt 230 V Ac Outdoor Type With High Pressure Die Cast Aluminium Hosing And Heat Resistant Complete With Driver, Lamp Bracket With Impact And Corrosion Resistant Including Thermal Management In Multiple Optics Complete With Ip 65 / 66 Protection Complete. 122 S&Fled Light Fitting 1X12 Watt Bulkhead Luminaire Including Led Light Driver Holder Connecting Up With Three Core Flexible Copper Conductor Cable Of Suitable Size Complete. 123 S&F Mcb Db Spn 4 Way, Double Door, Ip-43, Ik-09, Isolated Neutral Bar And Fixed Flush To Wall And Suitable For Universal Mounting Completeall As Specified And Directed. 124 S&F Mcb, Single Pole And Neutral, 230 Volts, 32 Amp Rating, C Series Fixed In Dbs Catered Here-In-Before. 125 M & L Forin Replacement Foronlytwin Core Pvc Insulated Unarmoured Cable6sqmm Flat 1100 Volts With Aluminium Multi Stranded Conductorcomplete All As Specified And Directed By Engr-In-Charge. 126 S&F Mcb Sp 6-32 Amps 240 Volts 10 Ka 50 Hz C Curve Complete All As Specified And Directed By Engineer In Charge 127 M&L Forcement Concrete ( 1: 2: 4 ) Type B-1 Using 20 Mm Graded Stone Aggregate As In Lintels Upto 1.5Mtr Span, With Plain Fair Faces Including Chamfers, Weathering Throttling Etc And Set In Cement Mortar ( 1:4 ) Complete With Joint To Match Including Necessary Form Workscomplete All As Specified And Directed. 128 S&F Mild Steel Workas In Posts Or Struts In Fencing Including Cutting Tops To Shape As Directed , Drilling Holes, Notching For Wire Etc Flat Iron Fillets ( For Securing Wiremesh Etc ) Including All Necessary Drilling, Bolting Or Riveting Etc And Similar Work Conforming To Fe-290 Gde E-165 Complete All As Specified And Directed. 129 S&F Mild Steel Screw Bolts ( Machine Made ) With Hexagonal Or Square Heads At One Ends And Screwed The Other , Or Screwed Both Ends Each Ends To Be Fitted With Washers And One Hexagonal Or Square Nut Nexc 5Cm Long And 12Mm Dia Complete 130 S&F In Repair Concertina Coil 900Mm Dia ( In Stretched Position ) Hot Dip Galvanized Steel Wire Coated With Clr Anti Corrosive Paint, Making Diamond Shape With The Help Of Dovetail Clips ( 18 Swg ) Fixed Over And Including Razaor Wire, Medium Barb, Hot Dip Galvanized Steel Wirerazor Wire With Angle Iron. The Concertina Coil To Be Fixed With Razor Wire At Points Wherever Coil Touches Bottom Of Razor Wire With The Help Of Hog Rings ( 14 Swg ) Including All Fittings Like Fastener Clips, Steel Lug Rings Etc Complete All As Specified And Directed. Note- ( I ) Stretch Length Of Each Coil Shall Be 6 Mtr Complete All As Specified And Directed. ( Ii ) Angle Iron Shall Be Measured Paid Separately Underrespective Item Of Schedule Of Works. 131 M & L For Preparation Of New Painted Steel Surfaces Of Any Description, Over 10 Cm Width Or Girth And Applying Two Coat Of Synthetic Enamel Paint Over A Coat Of Primer ( Ordinary Tint ) , Complete All As Specified And Directed. 132 S & F Vitreous China Wash Basin, Flat Back, Size 450X300mm White, Excluding Taps, Waste, Chain And Plug And Porcelain Stopper But Including Brackets. And Waste Pipe 32Mm 133 S&F B164 Waste Coupling Of Ptmt ( Half Or Full Threaded ) . ( Minimum Weight2mm45gms / 40Mm 60 Gms Waste Pipe Of 40Mm Dia Suitable For Whb, Kitchen Sink Complete All As Specifed And Directed 134 S&F Angle Cock Fancy Type Cp With Long Shank Cast Copper Alloy Screwed Down High Pressure With Crutch Or Butterfly Handle Screwed Both Ends Of Size 15Mm Bore. Complete All As Specified And Directed. 135 S & F Pillar Taps Fancy Typecast Copper Alloy, With Capstan Heads, Chromium Plated, Screwed Down High Pressure, With Or Without Lettered `Hot Or `Cold With Long Screwed Shanks And Fly-Nuts, Screwed For Iron Pipe And Fixed 136 S&F Pvc Connections 15Mm Size With Ptmt Nuts Of Length 600 Mm, Complete All As Specified And As Directed. 137 S&F Shelf Of Ptmt Fixed With And Including Chromium Plated Brass Screws And Wooden / Plastic Cleats ( Minimum Weight 300Gms ) Complete All As Specified And Directed . 138 S&F Cp Soap Dish Fancy Type Complete All As Specifed And Directed. 139 S&F600 Mmx450 Mm Bevelled Edge Mirror Of Selected Quality Glass, Mounted On 6 Mm Thick Ac Buildg Board Or Commercial Plywood And Fixed To Wooden Plugs With Cpbrass Screws And Cup Washers Complete All As Specified And Directed. 140 S&F Of Grating Doom 125 Mm Dia With Waste Hole Of Ptmt. ( Minimum Weight 40Gms ) 141 M&L 75Mm Pvc ( Swr ) Floor Trap, Plain With Grating Including Jointing With Solvent Cementcomplete All As Specified And Directed. 142 S & F 50 Mm Dia ( Swr ) Pipes Single Socketed, In Any Length With Rubber Ring Joints Fixed To Walls Including All Necessary Bends Complete All As Specified And Directed 143 M&L For Cuttingin Cemennt Mortar Openings, Through Brick Walls Exc One Brick But N.Ecx Two Brick Including Providing, Fixing And Removing Shoring, Cleaning And Stacking Bricks, Removing Surplus Serviceable Bricks, Hard-Core, Etc.. To Store And Rubbish Not Exc. 50M ? 144 Note :- Credit Shown In Credit Schedule Of Tender Document Shall Be Considered By The Tenderer While Quoting The Rates Of Various Items. The Same Shall Be Recovered From Various Payment To Contractor Before Handing Over Old Material.

INR 500 /-

INR 98000.0 /-

INR 49 Lakhs /-

Name of Work:CERTAIN SANCTION WORKS UNDER GE (AF) BAMRAULI

Sl. No.	Item Description
1	M&L for Fabrication, supply, installation, testing and commissioning CPRI approved electrical cubical control panel board factory assembled made outdoor type feeder pilar box double door type wheather and vermin proof fabricated of 3.15 mm CRCA MS Sheet of suitable size, 3 phase 4 wire 415 V AC 50Hz complete duly painted with powder coating complete with locking arrangement, earthing termimal with suitable rating copper strips for incoming/outgoing MCCB"s including and mounting measuring instrument such as Volt meter, Ammeter, selector switch, CTs phase indicator lamp with holder, toggle switches and backelite fuse cut outs etc including incoming and outgoing cables connections with suitable cable glands and end termination including grouting of feeder pillar box 60 cm above ground level by providing 90 cm long angle iron size 50x50x6mm welded on all four corner embedded in PCC (1:2:4) using 20mm graded upto 30 cm complete all as specified and directed by the Engr-in-Charge (Feeder piller box shall be consisting the following:-) (a) High conductivity Copper busbar (Set of 4 strips), 4 Nos TPN of suitable for 1200 Amps rating ,(RYB) for phase and 1 No for neutral mounted on DMC support with heat shrink sleeve-1 Set. (b) Phase indication lamp, LED type(set of 3) -1 Set. (c) Ammeter digital type having measuring range (0-1500) Amps with CTs etc including rotary switchto measureload of each phase : L&T/Seimens. (d)Volt meter digital type having measuring range (0-1000) volt to measure voltage of phase R.Y.B make : L&T/AE. (e) Grouting of panel including earth work as required PCC (1:3:6) type D-2 using 20 mm gradeded stone & plastering with (1:4 )cement sandetc complete. (f)INCOMMING: ACB 4 Pole 800 Amp Manual drawout type with Icu=Ics=Icw(1s)=50 kA, In Built Temperature Protection, Incomming cotrol device :01 Nos. (g) OUTGOING: MCCB 4 Pole 400 Amp 415 voltthermal adjustable type with 36 KA breaking capacity & spreader both side as outgoing cotrol device :03 Nos.
2	Supply , laying, jointing and testing(in replacement) of undergroundLT cable XLPE insulated, screened PVC bedded , galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 300 Sqmm 3.5 Core laid in trenches/ducts/along poles/ through pipe under road etcall as specified and directed by Engr-in-Charge
3	Excavation in trenches not exceding 1.5m wide and noe exceding 1.0 sq m on plan and not exceding 1.5m depth and getting out soft soil all as specified and directed
4	Returing filling in including spreading leveling watering and well ramming in layer not exceding 25 cm as in soil all as specified and dirceted all as specified and directed
5	Removing excavated material not exceding 50 m and depostingwhere directed at a level not exceding 1.5 m above the starting pointall as specified and directed
6	M & L for sand cushioning all around the cable for protection by natural sand all as specified and directed
7	Supplying and Laying old size bricks of size 230mm x 113 mm x 75 mm for cable protection all as specified and directed
8	M&L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60cmx 6.3mm thick buried direcly in ground vertically to a depth not less than 2.25 meters below normal ground lev el with the top edge of earth plate not less than 1.5 meters below ground level connected to galvanized iron strip 32 x 6 mm by means of bolts, nuts, check nuts and washers made out of galvanised iron or steel all as shown in electrical plate No.5 of SSR part I and earth wire protected by galvanized pipe light grade 40mm bore and thorugh test point including necessary earth work and excavation in any type of strata, GI light grade 20mm bore watering pipe with funnel and wire mesh, PCC 1:2:4 type B1 chember with 40mm thick RCC 1:2:4 type B1 design mix cover slab with 6mm dia MS bars at 100mm c/c both ways with MS Hook 6mm dia MS bars etc complete all as specified and directed and testing on completion. NOTES : (i)The concrete pit shall be made in PCC 1:3:6 type C-1, using 20mm graded crushed stone aggregate 40mm thick precast cover slabof RCC (1:2:4),type B-1,using 20mm graded crushed stone aggregate with suitable MS handle in lieu of CI cover. (ii)Item includes the cost of 7.5 metre GI pipe for protection of earth strip. Any variation in length shall be adjusted through deviation order (iii) Items includes cost of 7.5 metre earth lead strip. Any variation in length shall be adjusted through deviation order. (iv)Earth electrode shall be surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides
9	Excavation in hard standing for crossing the road as per the authorized width for taking out/laying/cleaning/repairingof CI/GI pipe lines all as directed including making good the road cut to match with the existing surface either with bituminous macadam or with PCC 1:2:4, type B-2(using 40mm graded crushed stone aggregate) complete all as specified and directed.
10	Taking up unserviceable CI rusted/ broken pipe line (including all fittings) with spigot and socket/ Flanged ends and removal from site including burning out joints and recovering lead complete all as specified and directed for the following sizes/bores of pipes :-(Earth work shall be measured and paid separately).
11	(a) 150mm bore dia
12	Supply & laying in trenches ductile iron (DI) pipe with spigot and socketed ends centrifugally cast class "K-7" in any length laid in trenches complete all as specified and directed for the following sizes/bore of pipes (DI fittings and jointing materials shall be measured and paid separately) :-
13	(a) 150 mm bore dia
14	M&L for cutting ofthe CI/DI pipe in position for insert of new tee, branches such as Tees/Reducers/Tail pieces/collers/sluice valve/Air release valve etc.with suitable size of clamp of size 40 x 6 mm with nuts, bolts and washer of the following sizes complete all as specified and directed:-
15	(a) 150 mm bore
16	M&L for rubber gasket joint suitable for DI pipe and fittings withsize of nuts, washer & bolts etccomplete all as specified and directed forthe following sizes :-
17	(a) 150 mm bore
18	M&L for upto 150 mm bore ductileiron (DI) fittings such as bends (any type, radius and angle) tapers any type,(straight, bend, increasing, decreasing or double socket etc) tee pieces single branch, “Y” junction, double branch, cross (all sockets or socket and spigot) collars, flanged spigot,caps and plugs complete all as specified and directed.
19	Supply, fixing, jointing and testing in repair of cast iron sluice valve class I(ISI MARKED) PN-1.6 typelatest IS 14846-2000 flanged ends, drilled having stainless steelspindle with cast iron wheel head at top complete with nuts, bolts, washer and rubber gasket etc complete including taking down unserviceable sluice valve completeall as specified and directed for following bore of CI pipe line :-
20	(a)150 mm dia bore
21	Dismantling old broken / damaged valve pit chamberand construct valve pitchamber of size 1050mm x 1050 mm x 1050 mm (internal dimention) complete including excavation and earth work, PCC 1:4:8, type D-2 using 40mm graded stone aggregate, brick work in cement mortar 1:6, plastering in cement mortar 1:4 (internally) and including 3mm thick mild steel sheet cover and painting with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
22	Supply , laying, jointing and testingin replacement of undergroundLT cable XLPE insulated ,screened PVC bedded , galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm 4 Core laid in trenches/ducts/along poles/ through pipe under road etcall as specified and directed by Engr-in-Charge
23	Supply , laying, jointing and testingin replacement of undergroundLT cable XLPE insulated ,screened PVC bedded , galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 Sqmm4 Core laid in trenches/ducts/along poles/ through pipe under road etcall as specified and directed by Engr-in-Charge
24	Supply , laying, jointing and testingin replacement of undergroundLT cable XLPE insulated ,screened PVC bedded , galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 Sqmm 3.5 Core laid in trenches/ducts/along poles/ through pipe under road etcall as specified and directed by Engr-in-Charge
25	Supply , laying, jointing and testingin replacement of undergroundLT cable XLPE insulated ,screened PVC bedded , galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 Sqmm 3.5 Core laid in trenches/ducts/along poles/ through pipe under road etcall as specified and directed by Engr-in-Charge
26	M & L for busbar chamber box of 1.6 mm sheet with tinned plated 04 Nos copper bars of following bus bar and following box size, factory made, suitable for pole/wall mounted including all connections with aluminum strips/lugs, glands to be provided at cable entries, powder coated paint complete for the following rating:-
27	Bus bar of rating 100 Amp
28	Bus bar of rating 200 Amp
29	Bus bar of rating 300 Amp
30	S&Fsuitable size of sheet metal enclosure with MCCB 4 pole, 415 volts, connection by using aluminum lugs and making arrangement to fix/hang on wall complete all as specified and directed by Engr-in-Charge for the following capacity/rating:-
31	200 Amp rating, 36 KA breaking capacity with adjustable magnetic setting with both sidespreader for cable connection
32	315 Amp rating, 36 KA breaking capacity with adjustable magnetic setting with both sidespreader for cable connection
33	Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 4 sq. mm nominal cross section, 2 corein service connections etcall as specified and directed by Engr-in-Charge
34	Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sq. mm nominal cross section, 2 core in service connections etcall as specified and directed by Engr-in-Charge
35	S&F Switch socket outlet multipurpose 3 pin, 16 amp and one pin, 6 amp controlled by one switch with PVC box etcall as specified and directed by Engr-in-Charge
36	M&L for excavation in trenches by cutting/ removal of interlocking tiles/ PCC/ hard standing for laying of pipe including making good the existing surface with PCC/ refixed interlocking tiles to match the original finish all as specified and directed.
37	Supply and lay steel water tubing GI pipe 40mm light grade ISI marked with all fittings laid in trenches or fixed to wall etc complete all as specified.
38	Supply, fixing, testing and commissioning of Open well submersible pump 10 HP (7.5KW), 3 phase, 415 volts, 50 Hz, head range 15 to 33 mtr, 1500LPM, outlet of 80mm, complete all as specified and directed.
39	Supply, fixing, testing and commissioning of MU 10H automatic DOL Starter (with Sz5 SPPR), suitable for pump/ motor 3 phase, 415 volts, 50 Hz, relay range 15-25 Amp, including suitable size LT panel, outdoor type, for mounting/fixing the pump controller, cubical compartmentalised of 2mm thick CRCA sheet powder coated front door openable with angle iron 45x45x5 mm frame bottom of the panel board, grouted by using PCC foundation 1:2:4 type C1 with 20 mm graded stone aggregate, thimbling and cable entry boxes with cable gland inculding painting with two coat of powder coated paintingover a coat of red oxide primercomplete all specified and directed. Note : 1. The cost of fabrication complete and PCC work complete are incuded in quoted rate and no extra payment will be made for them.
40	S&F in replacement of PVC insulated flat copper submersible cable 4 Sqmm, heavy duty, 3 core 1100 volt grade of the following size complete all as specified and directed. Make - Havells/ Plaza/ Finolex -
41	Supply and lay steel water tubing GI medium 80mm grade ISI marked with all fittings laid in trenches or fixed to wall etc complete all as specified.Make: Jindal/Prakash/Swastik Note :- Excavation and earth work will be measured and paid separately.
42	M&L for fabrication and S&F rain water shelter cubical compartmentilzed outdoor type suitable for Monoblock pump set including starter, verically enclosed with PGI sheet having one door for opening/ closing the enclosure, also having workable space for connection/ disconnecting of Monoblock pump motor including PCC/ cement work as required at site
43	Supply, fixing, jointing and testingcast iron non return valve of 80mm dia flanged ends as per IS-5312 (ISI Marked) complete with washer nuts/ bolts and rubber gasket complete `all as specified and directed.
44	M&L for earthing complete with Galvanised earth plate electrode 600x600x6mm thick buried directly in ground (earth) pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level connected to galvanised iron strip 25x4mm as earthing lead by means of bolts, nuts, check-nuts and washers of galvanised iron or steel besides welding at all joints as shown in drawings and including excavation and earth work, GI pipe light grade 40mm bore for protection of GI strip from earth electrode to and including the earth test point of galvanised Iron/steel of size 75mm x 75mm x 25mm, supplying and laying charcoal stone aggregate) chamber and mild steel angle iron frame 40x40x3mm and RCC cover 40mm thick (1:2:4) type B-1 using 20mm graded crushed stone aggregate reinforced with 8mm dia TMT BARS @ 75mm O/O both ways with mild steel handle 12mm dia, PGI funnel with wire mesh, 20 MM dia GI pipe light grade for watering all as shownin electrical plate No.3 of MES SSR Part - 1
45	Supply, install, testing and commissioning ofout door type cubical panel board of size 900mm x 600mmx 300mm outer shell made out of3.15 mm thick MS sheet and inner shell made out of 1.6 mm thick MS sheet and MS angle iron section 50x50x6 mm mounted on PCC 1:2:4 type B-1 platform 60 cm aboveand 30 cm below the ground level,frame factory fabricated with front openable double door system (Each door hinged with body at 2 places with body and hinges should be welded with body and door) lockable/ openable by Keyshaving chromium plated 19 mm dia fancy lock, “U” type gasket shall be used to make the outer shell completely dust/vermin proof suitable for 3 phase 4 wire 415 Volt, 50 Hz with suitable gasket to make it dust/ vermin proof and general construction complete all as specified and directed by Engineer-in-charge. confirming to IS:8623/93 and comprising of the following :- Bus Bar System - Aluminium main Bus bar duly colour coded with PVC sleeves 4 pole of capacity 160 Amp capacity. Incomer - MCCB 100 Amp, 4 pole, 25 KA, ICS = 100% ICU, with adjustable thermal magnetic setting alongwith Spreader terminals – 01 No Make : L&T/ HPL/ Havellls. Outgoing - (a) MCCB 63 Amp, 4 pole, 25 KA, ICS = 100% ICU, with adjustable thermal magnetic setting alongwith Spreader terminals - 01 No Make : L&T/ HPL/ Havells. (b) MCB 63 Amp, TPN, "C" curve, 10 kA - 02 Nos Make : L&T/Havells. (c) Digital volt meter 0 to 500 volt AC of size 96mm x 96mm with inbuilt selector switch - 1 No Make : L&T/HPL/Schneider Elect. (d) Digital Amp meter 0 to 300 Amp of size 96mm x 96mm with inbuilt selector switch and CT"s of 200/5 CTR - 1 No Make : L&T/HPL/Schneider Elect.
46	M&L for 100 mm thick plain cement 1:4:8 type D-2 (using 40 mm stone agregate) as in foundation including rafts,footing, foundation beam,plinth beam base for column etc basemen slabs under reamed piles and mass concrete etc complete all as specified and directed.base of floors complete all as specified and directed.
47	M&L for PCC B-1 (1:2:4) nominal mix using 20 mm graded stone aggregate in slabs supported walls beam and columns in floor landing shelves etc complete all as specified and directed.
48	M&L for formwork to sides and slffites of floors or roof beam haunching, girders,bressummers,lintels, cantilevers, shelves including support overchanges etc also splays between floors and beams etc for fair finish complete all as specified and directed.
49	M&L for TMT bars 10 mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (anneated) not less than 0.9 mm dia or securing with clips
50	All as per item No 39 above but 5 mm dia and over upto & incl 10 mm dia as in stirrups complete all as specified and directed.
51	Taking down Chowkats or frames with shutter not exceeding 1.5 Sqm each (without taking off shutters from the frames)
52	Taking down Chowkats or frames with shutter exceeding1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frames)
53	S & F solid PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet & edges will be painted to match with prelam sheet, reinforced with M.S. square tube andfixing in opening as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge
54	M&L for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
55	S&F Steel ventilator with top hung shutter including hinges, steel peg stay etc, complete all as specified.
56	Supply only 3mm thick sheet glass ordinary quality glazing with oil putty in metal or wooden beads in square n exc 0.5 Sqm in each pane all as specified and directed.
57	M&L for Mild steel work in bands straps,including bolts as in holdfasts and similar articles conforming to Fe-310-0,Fe-410-0 complete all as specified and directed.
58	S & F 100 mm But Hinges, medium weight cold rolled mild steel and Fixed.
59	S & F 250 mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.
60	S & F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section
61	S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised.
62	M&L for preparing old or previously untreated steel surfaces of any description not otherwise describedover 10 cm width or girth and applying one coat of synthetic enamel paint etccomplete all as specified and directed.
63	Demolition of brickwork built in cement or cement lime mortar complete.
64	M&L for brick work with sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete.
65	Dismantling floor hearth or wall tilling including cement mortar bedding , removing serviceable tiles to stack and rubbish off the premises for minor repair to floor tiles/ nahani traps and repair to concealedstop cock and GI tubing in wall etc in patches. complete.
66	M&L forNon Skid ceramic tilescoloured 8 to 10 mm thick(square/ rectagular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floors etc. setand jointed in neat cement slurry and pointed in white or coloured cement to match including 15mmthick screed bed layer in CM (1:6) for lying floor finish etc complete.
67	M&L for Glazed ceramic coloured tiles in vertical surface 450x 350x7 mmthick tiles set and jointed in neat cement slurry and pointed in white or coloured cement to matchthe shade tile over and inclduing 10mm thick rendering in CM (1:4) complete etc complete all as specified.
68	S&F in repair new beveled edged looking mirror of size 600mmx450mmof selected quality glass mounted with SS studs complete all as specified and directed
69	S&F Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete.
70	S&Fin repair PVC low level flushing cistern 10 litres capacity, white, with all fitting and fixtures including brackets and 32 mm bore PVC flush pipe, complete.
71	S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete.
72	S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement, dia of outlet 75 mm complete.
73	S&F (in Repair) vitreous china wash down water closet (pedestal pattern) white (excluding flushing cistern and flush pipe)and P or S trap including connection to drain (or outgoing pipe) and to flushing pipe anti-syphonage pipe etc complete all as specified and directed. including plastic water closetseat closed pattern with flat bottom and cover and mild steel chromiunm plated or aluminum hinging device.
74	S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete.
75	S&F (in Repair) vitreous china wash hand basin, white, flat back, size 580 x 450mm excluding taps, waste, chain and plug and porcelain stopper butincluding pvc connection pipe of 450mm length, waste coupling of 32mm dia of PTMT, MSbrackets including cutting for and pining in ends of bracketscomplete.
76	S&F in repair mild steel angle iron bracket with 25x25x3mm angle iron for WHB including refixing of WHB, steel painting and making good disturbed surface complete.
77	S&F in repair bib taps cast copper alloy chromium plated (ISI Marked) with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete.
78	S&F in repair15 mm fancy type stop valves, castcopper alloy,screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed all as specified and directed
79	M & L for taking down cement plaster on brick work or concrete surfaces incl racking out joints, hacking for key scrubbing down with water etc and rendering 10 mm thick in ready mix cement plaster 1: 4 on fair faces of brick masonary or concrete surfaces of wallsmixed with water proofing compound (ISI Marked) @ 3% by weight of cement or as per manufacturer instructions, finished even and fair complete all as specified and directed after applying one coat of smart care damp guard/block 2K of Make :- Asian paints / Dr. Fixit or equivalent as approved by GE.
80	S&F Soap dish, vitreous China white, approximate size 160x 160x90mmfixed to plugs with chromium plated brass screws complete.
81	Taking down PVC soil, waste and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks,bends etc. Complete.
82	S&F in repair 110 mm dia PVC (SWR) rain water pipes, single socketed, fixed to walls with and including MS clamps complete.
83	S&Fin repair 75 mm dia PVC (SWR) rain water pipes, single socketed, fixed to walls with and including MS clamps complete.
84	S&F in repair 110mm PVC (SWR) bends of any radius complete.
85	S&F in repair 75mm PVC (SWR) bends of any radius complete.
86	S&F in repair 110mm PVC (SWR) junction single T equal or unequal with acccessible doorcomplete.
87	S&F in repair 110mm PVC (SWR) vent cowlcomplete.
88	S&F in repair 75mm PVC (SWR) vent cowlcomplete.
89	S&F Tubular towel rail 20mm dia, 600mm long of brass, chromium plated complete.
90	M&L for complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, applying two coats of distemper, oil emulsion white or tinted over and including one 2mm thick wall care putty complete.
91	Taking up or down 15 mm dia steel tubing and connections including cleaning for refixing or removal to store complete.
92	S&F 15 mm bore galvanised steel water tubing "medium grade" with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed.
93	Taking up or down 20 mm dia steel tubing and connections including cleaning for refixing or removal to store complete.
94	S&F 20 mm bore galvanised steel water tubing "medium grade" with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed.
95	S&F Mild steel chromium plated grating 100 mm dia, fixed in repairs to Nahani traps complete.
96	S&F Mild steel chromium plated grating 125 mm dia, fixed in repairs to Nahani traps complete.
97	Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete.
98	M&L for rendering 15mm thick in cement mortar 1:6 on faces of brick work or concrete surfaces, finished fair and even complete.
99	M&L for rendering 15mm thick in cement mortar 1:4 on faces of brick work or concrete surfaces, finished fair and even complete.
100	M&L for rendering 10 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished fair & even complete.
101	M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion with roller brush, white or tinted over & including alkali-resistant cement primer complete.
102	M&L for preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete.
103	M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of cement paint white or tinted with roller brush over & including a coat of cement wash with white cement complete.
104	S&F rotational moulded polythenewater storage tanks, hoisted and fixed in position 500 ltrs capacity including 2 Nos GI union, checked nut and 25mm PTMT float Valve, overflow and washout GI medium grade pipe 15mm dia,Nippulecomplete all as specified and directed including Dismantling of old PVC tank and removing to store
105	Taking down carefully aluminium battenpoint, wiring for light/fan/socket/bell or power point including. All fittings i.e. switch, sockets, ceiling rose, regulators, batten holders, etc. Complete and making good disturbed surfaces of wall/floor to match with the surroundings of wall/ceiling/floor etc including taking down old light fittings. Note :- (i)Contractors quoted rate of this item deemed inclusive of unscrewing of the serviceable fittings and fixture as directed and deposit in MES store yard. (ii)Quoted rate also deem to be included cost of cutting chases for taking out concealed conduit and nitch for terminal box. (iii)Decision of GE shall be final and binding in respect of serviceability of fittings/fixture.
106	M & L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through new PVC concealed conduit mediem grade, ISI markedand including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty, fabricated branded modular metal flush box duly make embossed, concealed in walls with suitable modular inner and outer plate for housing switches, socket outlet and fan regulators etc, complete all as specified and as directed for the followings:-
107	(a)One light/fan/bellpoint controlled by one switch single pole one way
108	(b) All as per item No 96here-in-before butone3 pin 6 amp switch socket out let independent .
109	(c) All as per item No 96 here inbefore but one 3 pin 6 amps socket outlet on the same board with other switch complete .
110	All as per item No 96 here-in-before but using 02 Nos. 4.0 sq mm size for main cable and 01 No.2.5 sq mm size as earth conductor for one 16 Amp switch socket outlet on independent board.
111	S&F switch modular flush 10A single pole one way ISI marked
112	S&F modular sockets 10 Amp 2 in 1 2/3 pin combined all as specified and directed.
113	S&F switch modular flush type 15/16 Amp single pole one way 240 volt one module ISI marked
114	S&F modular sockets 16Amp 2 in 1 3/5pin combined all as specified and directed.
115	S&F ceiling rose surface bakelite 60x25mm three terminal
116	S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
117	S&F LED batten extruded surface mountingfitting 2 feet long aluminium housing 10 wattinput voltage 220 volt inbuilt LED and driver complete all as specified and as directed.
118	S&F Ventilating Fan250 mm sweep, 1250 RPM, non metallic resin body,single phase 240 volts AC 50 Hzand connecting up complete including louvers and provision of making holes and copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan completeall as specified and as directed.
119	S & F of exhaust fan 300 mm (Metal body) sweep complete with louvers including connecting with suitable size of copper conductor from ceiling rose to fan complete all as specified and directed.
120	S&F LED 2 X 2 ft backlite surface mounted fitting 36 Wattsnot less than 3200lm with Metallic CRCA powder coated body with high efficiency opal/PMMA diffuser with system efficacy > 80 lm/W, CRI>80, color temperature >5700k, IP 20, Power factor<0.95, THD<10%, 50000 burning hours ,Ambient temperature 0 to 500 DegC, Driver should meet IEC complaint for safety, with voltage variation range of 150-270 V and surge protection of 2.5 KV including necessary fixing arrangementsfixed completeallas specified and directed.
121	S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.
122	S&FLED Light fitting 1x12 watt bulkhead luminaire including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete.
123	S&F MCB DB SPN 4 way, double door, IP-43, IK-09, Isolated Neutral Bar and fixed flush to wall and suitable for universal mounting completeall as specified and directed.
124	S&F MCB, single pole and neutral, 230 volts, 32 Amp rating, "C" series fixed in DBs catered here-in-before.
125	M & L forin replacement foronlytwin core PVC insulated unarmoured cable6Sqmm Flat 1100 Volts with Aluminium multi stranded conductorcomplete all as specified and directed by Engr-in-Charge.
126	S&F MCB SP 6-32 Amps 240 volts 10 KA 50 HZ "C" curve complete all as specified and directed by Engineer in charge
127	M&L forcement concrete (1: 2: 4) type B-1 using 20 mm graded stone aggregate as in lintels upto 1.5mtr span, with plain fair faces including chamfers, weathering throttling etc and set in cement mortar (1:4) complete with joint to match including necessary form workscomplete all as specified and directed.
128	S&F mild steel workas in posts or struts in fencing including cutting tops to shape as directed ,drilling holes, notching for wire etc flat iron fillets (for securing wiremesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
129	S&F Mild steel screw bolts(machine made)with hexagonal or square heads at one ends and screwed the other ,or screwed both ends each ends to be fitted with washers and one hexagonal or square nut nexc 5cm long and 12mm dia complete
130	S&F in repair concertina coil 900mm dia (in stretched position) hot dip galvanized steel wire coated with CLR anti corrosive paint, making diamond shape with the help of dovetail clips (18 SWG) fixed over and including razaor wire, medium barb, hot dip galvanized steel wirerazor wire with angle iron. The concertina coil to be fixed with razor wire at points wherever coil touches bottom of razor wire with the help of hog rings (14 SWG) including all fittings like fastener clips,steel lug rings etc complete all as specified and directed. Note- (i) Stretch length of each coil shall be 6 mtr complete all as specified and directed. (ii) Angle iron shall be measured paid separately underrespective item of schedule of works.
131	M & L for Preparation of new painted steel surfaces of any description,over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of primer (ordinary tint), complete all as specified and directed.
132	S & F Vitreous China wash basin, flat back, size 450x300mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets. And waste pipe 32mm
133	S&F B164 Waste coupling of PTMT (half or full threaded) . (Minimum weight2mm45gms/40mm 60 gms waste pipe of 40mm dia suitable for WHB, kitchen sink complete all as specifed and directed
134	S&F angle cock fancy type CP with long shank cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore. complete all as specified and directed.
135	S & F Pillar taps fancy typecast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot" or `Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed
136	S&F PVC connections 15mm size with PTMT nuts of length 600 mm, complete all as specified and as directed.
137	S&F shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 300gms) complete all as specified and directed .
138	S&F CP soap dish fancy type complete all as specifed and directed.
139	S&F600 mmx450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC buildg board or commercial plywood and fixed to wooden plugs with CPbrass screws and cup washers complete all as specified and directed.
140	S&F of Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms)
141	M&L 75mm PVC (SWR)floor trap, plain with grating including jointing with solvent cementcomplete all as specified and directed.
142	S & F 50 mm dia(SWR) pipes single socketed, in any length with rubber ring joints fixed to walls including all necessary bends complete all as specified and directed
143	M&L for Cuttingin cemennt mortar openings, through brick walls exc one brick but n.ecx two brick including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core,etc.. to store and rubbish not exc. 50m ?
144	Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material.