Military Engineer Services-MES has published Tender For Repair / Maintenance / Improvement Of External Water Supply Distribution System Of Awc & Mcte Area And Comprehensive Maintenance Of Digital Water Level Indicators, Servicing And Maintenance Of Dosing Pump Sets Installed At Various Water Supp. Submission Date for this Tender is 25-05-2024. Water Pipe Line Tenders in Indore Madhya Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 18-May-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 25-05-2024 |
| FileName | File Description | File Size |
| bf868809-9407-4fb6-b66a-4e80fb32cd7d.html | Tender Notice | 0 KB |
| BOQ_729330.xls | Tender Document | 0 KB |
| PS8646.pdf | Tender Document | 0 KB |
| TENDER8646.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Taking up or down existing GI tubing and connections including cleaning for refixing or removal to store for following size of pipes complete all as specified and directed :- |
| 2 | 150 mm bore |
| 3 | 100 mm bore |
| 4 | 80 mm bore |
| 5 | 50 mm bore |
| 6 | 40 mm bore |
| 7 | 25 mm bore |
| 8 | 20 mm bore |
| 9 | 15 mm bore |
| 10 | Taking up cast iron water main from trenches carefully without any damage (including all fittings) with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed for the following sizes:- |
| 11 | 80 mm bore |
| 12 | 100 mm bore |
| 13 | 150 mm bore |
| 14 | 200 mm bore |
| 15 | 250 mm bore |
| 16 | 300 mm bore |
| 17 | 400 mm bore |
| 18 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep for foundation, laying pipe etc. or for shafts, wells, cesspits, manholes, pier holes, etc. and getting out in any type of soil complete all as specified and directed. |
| 19 | Returning filling in any type of soil including spreading levelling watering and well ramming in layers n.exc 25 cm thick complete all as specified |
| 20 | Removing excavated material (Soil) to a distance not exceeding 50 m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified |
| 21 | Supplying, fixing, laying & jointing in repair galvanised iron water tubes "medium grade" with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, check nuts, caps, plugs clips, wall hooks etc. laid in trenches, on ground or fixing on wall and testing complete all as specified and directed of following sizes: - |
| 22 | 150 mm bore |
| 23 | 100 mm bore |
| 24 | 80 mm bore |
| 25 | 50 mm bore |
| 26 | 40 mm bore |
| 27 | 25 mm bore |
| 28 | 20 mm bore |
| 29 | 15 mm bore |
| 30 | Supply, fixing, jointing and testing in repair of cast iron pipe with spigot and socket ends suitable for run lead joints centrifugally cast class LA in any length laid in trenches complete all as specified and directed of the following sizes :- |
| 31 | 80 mm bore |
| 32 | 100 mm bore |
| 33 | 150 mm bore |
| 34 | 200 mm bore |
| 35 | 250 mm bore |
| 36 | 300 mm bore |
| 37 | 400 mm bore |
| 38 | M&L for cutting existing CI pipes, laid in position for taking out branch connection by inserting new Tee, branches, collar etc. complete all as specified and directed for the following sizes:- |
| 39 | 80 mm bore |
| 40 | 100 mm bore |
| 41 | 150 mm bore |
| 42 | 200 mm bore |
| 43 | 250 mm bore |
| 44 | 300 mm bore |
| 45 | 400 mm bore |
| 46 | M&L for burning out lead joint and taking out spun yarn carefully for the following sizes of pipes :- |
| 47 | 80 mm bore |
| 48 | 100 mm bore |
| 49 | 150 mm bore |
| 50 | 200 mm bore |
| 51 | 250 mm bore |
| 52 | 300 mm bore |
| 53 | 400 mm bore |
| 54 | M&L for run lead Joint for cast iron pipes spigot and socket ends and cast iron special fitting with caulked spun yarn and lead for following size:- |
| 55 | 80 mm bore |
| 56 | 100 mm bore |
| 57 | 150 mm bore |
| 58 | 200 mm bore |
| 59 | 250 mm bore |
| 60 | 300 mm bore |
| 61 | 400 mm bore |
| 62 | M&L for CI fitting in repair, like cast iron bends (any type, radius and angle), tapers any type, (straight, bend, increasing, decreasing or double sockets etc.) tee pieces single branch, "Y" junction, double branch, cross (all socket or spigot and socket) collars, caps and plug upto 150 mm bore for spigot and socket end pipes complete all as specified and directed. |
| 63 | M&L for CI fitting in repair, like cast iron bends (any type, radius and angle), tapers any type, (straight, bend, increasing, decreasing or double sockets etc.) tee pieces single branch, "Y" junction, double branch, cross (all socket or spigot and socket) collars, caps and plug etc from size 200 mm bore to 300 mm bore for spigot and socket end pipes complete all as specified and directed. |
| 64 | M&L for CI fitting in repair, like cast iron bends (any type, radius and angle), tapers any type, (straight, bend, increasing, decreasing or double sockets etc.) tee pieces single branch, "Y" junction, double branch, cross (all socket or spigot and socket) collars, caps and plug etc from size above 300 mm to 400 mm bore for spigot and socket end pipes complete all as specified and directed. |
| 65 | M&L for cutting existing roadof width not exceeding 750 mm and n.exc 1.0 m deep for laying of water mains and filling back with excavated soil except road portion and road portion shall be make good with cement concrete1:2:4 type B1 (using 20 mm graded stone aggregate) complete all as specified and directed. |
| 66 | S&F in repairgun metal gate or globe valve with iron wheel head, screwed both ends for iron pipeincluding taking down/up old unserviceable gate/ globe valve of any type and testing complete all as specified and directed of following sizes:- |
| 67 | 50 mm bore |
| 68 | 40 mm bore |
| 69 | 25 mm bore |
| 70 | 20 mm bore |
| 71 | 15 mm bore |
| 72 | Supply & fix in replacement ofSluice valve cast iron body, double flanged, ISI marked (IS-14846), heavy duty, class PN-1.6 gun metal, with raising spindle of Stainless steel and operating handle, including rubber gaskets, nuts, bolts, washers etc including taking up existing sluice valve of the following sizes |
| 73 | 80 mm bore |
| 74 | 100 mm bore |
| 75 | 150 mm bore |
| 76 | 200 mm bore |
| 77 | 250 mm bore |
| 78 | 300 mm bore |
| 79 | 400 mm bore |
| 80 | M & L for servicing of sluice valve cast iron body/ Butterfly Valve by greasing/ oilingusing necessary tools and plants as required as per Manufacture instructions& providing glands rope of superior quality and rubber gaskets/packing where necessary to stop any leakage of sluice valve of size 80 mm dia to 400 mm dia all as specified and directed |
| 81 | S&F in repair brass check nut as per existing size including opening head portion of the valve and refixing the same complete suitable for CI Sluice Valve of following sizes :- |
| 82 | 80 mm to 200 mm dia |
| 83 | 250 mm to 400 mm dia |
| 84 | Supply & fix in replacement ofbutterfly valve gear operated having epoxy coated cast iron body, PN 1.6,ISI marked SGI disc with integral seat of nitrile rubber, including taking down of the following sizes:- . |
| 85 | 80 mm bore |
| 86 | 100 mm bore |
| 87 | 150 mm bore |
| 88 | 200 mm bore |
| 89 | 250 mm bore |
| 90 | 300 mm bore |
| 91 | 400 mm bore |
| 92 | S&F air release valve 40 mm double action with two air outlets , ISI marked including jointing materials such as flanges, nuts, bolts, washers, rubber gasket and fixing up in cast iron pipe of any size complete allas specified and as directed. |
| 93 | S&F in repairs40 mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball for iron pipe all as specified (minimum weight : 690 gm) |
| 94 | S&F in repairs 25 mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball for iron pipe all as specified(minimum weight : 455 gm) |
| 95 | S&F in repairs 20 mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball for iron pipe all as specified(minimum weight : 210 gm) |
| 96 | S&F in repairs 15 mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball for iron pipe all as specified(minimum weight : 142 gm) |
| 97 | M&L for rectification of leakages to water supply distribution lines 15 mm to 25 mm dia GI tubing by carrying outnecessary earth work excavation in any type of soil , returning / filling, removing and dewatering as required ,tightening of loose joints including provision of GI fittings like union, sockets , nipple, elbow etc. as required , threading where required compete all as specified and as directed. |
| 98 | All as per Item No 25 above but for GI tubing of size 40 mm to 50 mm dia. |
| 99 | All as per Item No 25 above but for GI tubing of size 80 mm to 100 mm dia. |
| 100 | Note for item No25 to 27 1. The quoted rate shall be inclusive ofearth work eacavation in any type of soil . 2. The quoted rate shall be inclusive of necessary GI fittings and flanges, Sockets,clampsetc. asrequiredand nothingextra shallbe paid to the contractoron this account. 3.GI Pipe of lenght above 01 Meterforrectification of complaints shall be measured and paid seperatelyunder the relevant items . |
| 101 | M&L for attending routine complaints of external water supply like "No water", Over flowing of service tanks etc. including rectification of minor defects by taking down of existing GI tubing upto 25 mm dia, cutting/ threading and making joints where necessary, cleaning for blockage, opening of float valve of service tanks cleaning and repairing and refixing the same or replace the same where necessary, replacement of jumper valve / packing sheet of gate valves or replace the unserviceablegate or Globe valves and replacement ofunserviceable GI fittings where required complete all as specified and as directed |
| 102 | All as per Item No29 above but for GI tubing of size 40 mm to 50 mm dia bore. |
| 103 | Note for item No 29&30:- 1. Daily complaintsshall be collected/received fromthe Water Supply Complaint cell of AGE E/M No-1, Filtration plant etc by the contractor and requried Nos oftradesmen shall be detailed immediately to resolve the complaint . 2. Stationery required such as complaint book, Job card etc. shall be provided by the contractor and quoted rate shall be inclusive of the same. 3.T&P including Ladder (wooden/Steel/Aluminium of required size) required for attending the above complaints shall be arranged by the contractor. 4.The complaints shall be attended and completed within 12 hours of the registration of the complaints including Sundays and Holidays. 5.The quoted rate shall be inclusiveof earth work excavation in any type of soil if any . 7. The quoted rate shall be inclusiveof GI fittings and flanges, sockets,clampsetc.asrequired . 8.Gate valves and Float valve of appropriate sizes as required shallbe measured and paid seperately under the relevent items . |
| 104 | M&L for attending breakdown of water supply pipe line and repairs to CI water mains of size 80 mm to 200 mm dia including neceassary earth work excavation in any type of soil by using necessary tools and plants such as JCB etc. or equivalent manpower ,by dewatering from the trenches by using motar/pumps etc. rectification of leakages if any, rectify the same by cocking of lead wool, or replacement of run lead joints or replacement of CI Specials or broken pipes etc. |
| 105 | All as per Item No32 above but CI water mains of size 250mm to 400mm dia . |
| 106 | Note for Item No 32 & 33:- (a) The CI Specials, Lead joints, cutting of CI pipes etc. shall be measured and paid seperately under respective items of BOQ/Schdule "A" (b) The quoted rate shall inclusive of necessary earth work excavation in any type of soil and making good thedamaged road surface as per existing and nothing extrashall be paid andadmissible (c)Complaints shall be attended and completed immeditely within 12 hours of initiation by Department by deploying requried Tradesman, tools and plant, materials as requried at site |
| 107 | M&L for Comprehensive maintenance ofelectric water level indicator system comprising of transreceiver node, seven segment display unit, ultrasonic sensor and SMPS installed at various locations in OHT"s of Mhow cantt including testing, fault finding and rectifying the fault, maintainingand submitting the test report on callcomplete all as specified and directed by Engineer-in-charge. NOTE :(a) No of job shall be measured and paid on basis of No of complaints attended by contractor. (b) spare parts as required shall be measured and paid separately under relevant items Any other minoritems as required for smooth functioning of Water Level indicator shall be provided by the contractor which is inclusive in the quoted rate. |
| 108 | Supply only Transreceiver node compatible to existing model |
| 109 | Supply only Seven segment display unit compatible to existing model |
| 110 | Supply only ultrasonic sensor compatible to existing model |
| 111 | Supply only SMPS compatible to existing model |
| 112 | M&L for servicing and cleaning of decrin dosing system complete by removing the scales, open up blockages in nozzles and replacing flow pipe and making complete system functionable complete all as specified and directed by Engineer - in - charge. |
| 113 | Supply and layingtwin core copper conductor cable of size 0.5 sqmm |
| 114 | Supply, laying, testing and commission including connection of XLPE insulated armoured heavy duty under ground electric cable with aluminium stranded conductor 1100 volts grade of cross section 4 sqmm x 2 Core. |
| 115 | M&L for sand filing as incable trenches for cushioning of cable ,using sand dry, coarse including consolidation complete allas specified |
| 116 | S&F in repair ofDOL starter suitable for 5 to 15 HP, 3 phase electric motor, workable at 415 Volts, 50 Hz , AC supply, with suitable over load relay , power contactor, protection relay for earth fault, over voltage, under voltage complete all as specified and directed. |
| 117 | S&Fin replacementsingle phase preventer suitable for the 3 phasepump set of any capacity |
| 118 | S&Fin replacement 3 pole contactor with 220/440 volt coil suitable for following starter:- |
| 119 | 15 HP |
| 120 | 30 HP |
| 121 | 50 HP |
| 122 | 75 HP |
| 123 | 100 HP |
| 124 | Supply & Fix in repair Sluice valves cast iron body, double flanged, ISI marked (IS-14846), heavy duty, class PN-1.6 gun metal, with non rising spindle of stainless steel, bronze body seat ring and operating handle, including rubber gaskets, nuts, bolts, washers etc including taking up. Make "Kirloskar/Leader/Venus" complete of following sizes: - |
| 125 | 80 mm bore |
| 126 | 100 mm bore |
| 127 | 150 mm bore |
| 128 | 200 mm bore |
| 129 | 250 mm bore |
| 130 | 300 mm bore |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
