Hll Lifecare Limited-HLL has published Tender For Turnkey Works For Setting Up Amrit Pharmacy At Nimhans, Bengluru, Karnataka. Submission Date for this Tender is 07-05-2024. Civil Work Tenders in Bengaluru Urban Karnataka. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | CIVIL WORKS |
| 2 | 15.7.4 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar |
| 3 | 15.3 Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge. |
| 4 | 15.12.1 Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead: Of area 3 sq. metres and below |
| 5 | 13.4.1 12 mm cement plaster of mix: 1:4 ( 1 cement : 4 coarse sand) |
| 6 | 13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 7 | 13.60.1 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work |
| 8 | 11.41.2 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600 x 600 mm. |
| 9 | 17.10.2.2 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink without drain board 610 x 460 mm bowl depth 200 mm |
| 10 | 18.50.1 Providing and fixing C.P brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore |
| 11 | 50.6.1.1 Solid block masonry using pre cast solid blocks (factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 (1 cement : 6 coarse sand) etc complete |
| 12 | 50.18.8.2.1 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work,including cutting chased and making good the wall etc. 20 mm pipe 12 Kgf/cm2 |
| 13 | 50.18.8.6.2 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6 kgf/cm2 |
| 14 | 10.2 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 15 | MR Providing and fixing 12 mm thick Marine plywood conforming to IS: 710 |
| 16 | 8.2.2.1 Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade. Area of slab upto 0.50 sqm |
| 17 | 8.5 Extra for providing opening or required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. |
| 18 | 12.52.4 Providing and fixing tiled false ceiling of approved materials of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams per sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. |
| 19 | Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x 1.6 mm fixed to ceiling with 12.5mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85x 30x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer -in-charge. 12.5 mm thick fully Perforated Gypsum Board tile made from plaster board having glass fibre conforming to IS: 2095 Part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with centre borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side , having as NRC ( Noise Reduction Co efficient) of 0.79, with 50 mm resin bonded glass wool backing. |
| 20 | 12.45.1 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, |
| 21 | at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer"s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with: 12.5 mm thick tapered edge gypsum plain board conforming to IS : 2095-Part 1 |
| 22 | FURNITURE WORKS |
| 23 | MR Double Level Counter:Providing and fixing Double Level Counter, first step at 750 mm from ground, 900mm wide and Counter top at 1100 mm level and 300 mm wide. 12mm thick acrylic sheet (pure white in colour) to be used for counter top on 25 mm thick prelaminated commercial ply. Display unit with 8mm thick toughened glass fascia and 18mm thick prelaminated shelves to be in built in counter with movable shutter. Counter should contain retractable keyboard trays and partitioned drawers with drawer channel, cupboard units with swing door and auto close hinges. Drawers and cupboard are to be fixed with individual locks and handles. Cable manager and leg space are also to be provided.150mm high SS glossy skirting all Complete as per the design and instructions of engineer in charge. 12mm thick toughened glass partition to be provided above counter up-to roof height with necessary counter opening. Note: Only front elevation of wooden counter will be measured. (12mm thick toughened glass will be paid separately). Make laminate: GREENLAM, MARINO or equivalent. |
| 24 | MR Providing and fixing 12 mm thick frameless toughened glass Partition of approved brand and manufacture, including providing and fixing top & bottom fixing arrangement and making necessary holes etc. all complete as per direction of Engineer-in-charge |
| 25 | MR Medicine display shelf: Providing and fixing of Open Wooden display laminated cabinets of length 900mmX height 2500mm made up of Pre-laminated MDF Board, exterior Grade-I 18 mm thick confirming to IS: 14587 with decorative lamination on both side with proper provision of racks and shelves.Bottom storage unit of 600mm deep storage shall be 750mm from the ground with display wooden shelves @150mm C/c. Upper storage unit provided with display wooden shelves @150mm C/c and 450 mm deep and height of 1750mm from the bottom storage unit. All the edges to be finished with edge band and shelves to be fixed with proper bracket holders complete as per approved layout, drawings and instruction of Engineer in Charge. Note: Only front elevation will be measured. |
| 26 | MR Over Head Storage Cabinet: Providing and fixing ofOver head storage cabinet ofdimension 900mmX600mmX450mm made up of Pre-laminated MDF Board, exterior Grade-I 18 mm thick confirming to IS:14587 with decorative lamination on both side including inside middle partitions and with sliding door on front side with rollers, sliding channels, handles, locks etc. All the edges to be finished with edge band and shelves to be fix with proper bracket holders complete as per approved layout, drawings and instruction of Engineer In Charge. Note: Only front elevation will be measured. |
| 27 | MR Executive Table : Executive Table on pannel legs made of polished veneered melamine board top and pannels. Desk complete with cable management tray, grommets, under desk storage drawers, Pedestal side table. Minimum Dimensions : Table : 1500 x 900 x 750 mm ( W x D x H), Pedestal : 900 x 600 x 700 mm ( W x D x H) Recommended make Godrej Impress executive desk or equivalent. |
| 28 | MR Table: Supply and installation of Working Table 900mm length X600mm depth X750mm height made with 18mm thick prelaminated particle board with one side decorative and other side balancing lamination and all edges to be fixed with matching PVC edge beeding. Partitioned storage unit having swing door ,Partitioned cash drawer, Key board drawer and leg spaceare also to be provided with individual locks and handles, autoclose hinges, drawer channels etc. complete as per the aproved design andinstructions of engineer in charge. |
| 29 | MR Counter Height Stools : Supply and installation at site counter height stools of following specifications :Revolving adjustable Chrome plated steel body chairs with resistance to the corrosion.Cushion Seat with Lift mechanism for Adjustment of height. Minimum height 750mm before expansion. Medium Back rest and arm rest. Item shall be of reputed make. |
| 30 | MR Executive Chair: Medium back ergonomic chair with five nos. star shaped Nylon base 640mm diameter, Castors: 50mm diameter nylon twin wheel, gas lift height adjustment, back angle adjustment and backrest height adjustment. Fixed armrest providing natural resting for arms. Seat with PU cutted foam backed fabric, back rest with mesh type fabric, Upholstery: Heavy duty rubber backed fabric in BLACK. |
| 31 | MR Visitor Chair :Executive mid back cantileaver mesh chair overall size 600*520*550 mm. Chair to come in high quality fabric seat with pu foam and mesh back . Chair to be supported by chrome plated metal tube that holds the back and seat as one piece. Recommended make Godrej visitor or equivalent. |
| 32 | MR Supply and errection of S.S Airport Chair of standared dimension all complete as per direction of Engineer-in-charge |
| 33 | Electrical Work |
| 34 | 1.10.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C |
| 35 | 1.12 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. (Recommended Material : Polycab, RR Kabel, V Guard, Havells) |
| 36 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.( Recommended Material : RR Kabel/National/ Ralison/RKG/ Finolex / Polycab / Havells) |
| 37 | 1.14.1 2 x1.5 sq.mm + 1x 1.5 sq. Mm earth wire |
| 38 | 1.14.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 39 | 1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire meter |
| 40 | MR Supplying and fixing 3 pin 5 A ceiling rose on the exising junction box / wooden block including connections as required. |
| 41 | 1.31 S/F light plug point modular type accessaries : Supplying and fixing suitable size GI box with modular plate and cover in fronton surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection, painting etc as required, |
| 42 | 1.32 S/F Power plug point with modular type switch : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 and 15/16 amps modular switch, connection,painting etc as required. |
| 43 | 2.18 S/F 20A SPN MCB industrial socket outlet : Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A, “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. |
| 44 | 2.10.1 S/F "C" series, MCB : Supplyingand fixing5 amps to 32 amps rating, 240/415volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections,testing and commissioningetc. as required. Single pole |
| 45 | 2.10.4 S/F "C" series, MCB : Supplyingand fixing5 amps to 32 amps rating, 240/415volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections,testing and commissioningetc. as required. Triple pole |
| 46 | 2.14.3 Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63A |
| 47 | 2.15.3 Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 amps |
| 48 | 2.3.4 Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB"s (but without MCB"s and incomer ) as required .(Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 8 way (4 + 24), Double door |
| 49 | 2.3.2 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way , Double door |
| 50 | 2.12.1 Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40A |
| 51 | 2.16 Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required. |
| 52 | MR Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required. 2 core 10 sq mm with factory made clamp |
| 53 | MR Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 2 X 10 sq. mm (19mm) |
| 54 | MR Supply, Installation, testing and Commissioning of three phase electronic type energy meter with LCD display with battery backup, class 1.00 CT. The whole unit to be mounted on suitable metal enclosure (powder coated with locking arrangement, separate enclosure for incoming and outgoing) with required HRC fuses/MCB/RCCB as required, Neutral link and all connections complete |
| 55 | MR Supply,installation,testingandcommissioningofthe following types oflight fittings with all accessorieson false ceiling, true ceiling or wall as directedand giving connectionswith 16/0.20 mm 3 core PVC insulated andsheathedroundcopperconductorflexwireor extendingthe original wiring and giving connectionsas required. All recessed type fixtures are to be supportedindependentlywith chains or GI wire anchoredto the ceiling with anchoring bolt of necessary size. All loose wires above the false ceiling are to be neatly concealed by flexible metal/pvc conduits.( cost to include lamps & all consumables also) |
| 56 | MR Supply and installtion of 30-36W, 230V, 4300 lumen, Recessed Square LED Cool White light fixture of dimession 600mm X 600mm on false ceiling along with all accessories with intergrated driver THD<10% and connections as well as making good the damages as required at site Engineer. Recommended makes: Philips/Crompton/Wipro or equivalent. |
| 57 | MR Supply and installtion of LEDtubelight of6000K and 20-24W on wall or ceiling as directedand giving connections as required.All loose wires are to be neatly concealed. (Make: Philips, Wipro, Crompton or equivalent) |
| 58 | MR Supply and installtion of 10-15W, 230V, Recessed Square or Round LED Cool White light fixture on false ceilling along with all accessories with intergrated driver THD<10% and connections as well as making good the damages as required at site Engineer. Recommended makes: Philips/Havells/Wipro or equivalent. |
| 59 | MR Supply, Installation, testing and commissioning of wall mount fan (400mm sweep), adjustable speed. min 60 degree oscillation, swing, Adjustable upward and downward tilt mechanism, Protective Guard, Including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, mounting accessories, etc. as required. It shall be double ball bearning type. (Make: USHA, Cromption ,Havells) |
| 60 | MR Supply, conveyance, installation, testing and commissioning of ceiling fans of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required. 1200mm sweep - 3 star rated, 3 blade ceiling fan complete with 300mm down rod , canopies, shackles. (Make: USHA, Crompton ,Havells) |
| 61 | MR Supply, Installation, testing and commissioning of exhaust fan in the existing opening having 1300-1400 rpm motor speed and 150 mm sweep. bearning type. (Make: USHA, Cromption, Havells or equivalent) |
| 62 | 5.4 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 63 | 5.14 Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. |
| 64 | MR Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required. |
| 65 | MR Supply and fixing of 25mm casing capping |
| 66 | Network / LAN |
| 67 | MR 8 Port Network Switch : Supply, Installation, testing and commissioning of: 10/100 Mbps 8-Ports Gigabit Switch . ( Make : D-Link/commscope/Netgear) |
| 68 | 1.27.1 S/F Modular boxes, base & cover plate : Supplying and fixing 1 or 2 module ( 75 mm x 75 mm), GI box along with modular base, cover plate for modular switches in recess etc as required. |
| 69 | MR Providing and Fixing of RJ-45 socket outlet in the existing modular box with connections and all required. |
| 70 | MR Supplying,drawing and crimping with all accessories of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.1 run of cable from Port Switch to Data socket |
| 71 | MR Supply, installation, testing and commissioning of best quality cat-6 patch cord having1 metre length complete as per specifications as required. |
| 72 | Fire Fighting |
| 73 | MR Supply of ABC Type fire extinguisher of 2 Kgs. Make SAFEX / MINIMAX / CEASEFIRE or equivalent |
| 74 | CCTV |
| 75 | MR Supply, Installation, Testing & Commissioning ofIndoor IR Dome night vision cameras :2.0 MP, 0.1 lux, Resolution 720 P ,AWB/ BLC/ AGC,min 20m range, Built-in IR illumination, white color case, PAL-CE/FCC approved. Make: CP PLUS/HIKVISION/Honeywell or equivalent |
| 76 | MR Supply, Installation, Testing & Commissioning of Outdoor IR Bullet night vision camera :2.0 MP,0.1 lux, Resolution 720 P,AWB/ BLC/ AGC ,min 20m range, Built-in IR illumination, white color case, DC12V, PAL-CE/FCC approved. Make: CP PLUS/HIKVISION/Honeywell or equivalent |
| 77 | MR Supply, Installation ,Testing & commissioning of Network Video Recorder : 8-Channel Embedded 4k,Real-time, with 4 TB HDD. Rate shall be inclusive of all accessories, termination of cables, etc complete. Make: CP PLUS/HIKVISION/Honeywell or equivalent |
| 78 | MR Supply and Installation of LED Color Monitor of minimum 22 inch screen, complete, FHD display Make: LG/Samsung or equivalent. |
| 79 | MR Providing 4U Rack including accessories. Make:CP Plus, Netrack |
| 80 | MR Supply and Installation of SMPS Power Supply Unit of 230V, capacity miniumum 450W including accessories |
| 81 | MR Supply and Laying ofCoaxial cable 2+1 RG59/RG6 premium quality CCTV power and video cable with ISI marked PVC conduit including terminations with suitable BNC Connector, power Jack etc complete. |
| 82 | Sign Board & Sticker |
| 83 | MR Backlit Acrilic Board with projected letters: Supply, installation, testing and commissioningof weatherproof backlit acrilic board with projected letters made upof 20mm thick acrilic board and having box depth of min 100mm in approved size and design with reqired LED strips for high glow light. The board shall be fabricated and fixed over suitable welded and painted 25X25X3mm MS angle frame in suitable location and in proper line and level with all necessary fastners, supports etc. Electrical works likes electrical wirings, connections, fittings, externaly fixed weather proof 2/3 pin plug points and sockets including boxes etc. to be complete properly. All fabrication and fixing should be done as per approved design and instructions of Engineerin Charge. (Note: Only front elevation will be measured.) |
| 84 | MR Vinyl Transparent One Way Vision Glass Stickers: Supply and pasting of Vinyl Transparent One Way Vision Glass Stickers in approved size and design in glass partition and door as per the instruction of Engineer in Charge. |
| 85 | MR Supply and fixing of Flex media board as given design. The frame work must be in the suitable size of GI section tubes (Minimum size of GI section: 1squire inch). The flex media Quality: High Quality Glossy. |
| 86 | Capital/Supply items |
| 87 | MR Supply, Installation, Testing andcommissioning of 3 kVA True Online UPSsystem as per IEC 62040-3with415+/-15%V,50Hz,Single Phase input & Single Phase Output woring on 16 bit Microprocessor architecture, with inbuilt isolationtransformer,1hourbatterybackup, batteryrackaccessories,suitablecoppercabling work from incoming switch and to outgoing switch isalso undercontractor scope.Make: Liebert/Numeric/APC |
| 88 | MR LaserjetMultifunctionalMonochromeNetwork Printer Supply and Installation at site, All in One LaserjetMultifunctionMonochromePrinter havingLCDDisplay,withfunctionstocopy, print and scan, print resolution 600 dpi x 600 dpi, 20ppmprintspeed,Dutycycleminimum8000 pages per month, 24 bit depth, USB, Wi-Fi connectivity.Make:hp/brother/canon/epsonor equivalent, for Bill Printing cum Office use with Warrantyperiodofoneyear.Connectivity:Hi- speedUSB 3.0Supported,Wi-Fi,Media Types: Paper, envelopes, labels, cardstock, transparencies, postcards, Functionality: Print, Scan/Copy.Power Consumption:Maximum 250 WattsRecommendedMake: hp/brother/canon/epson or equivalent |
| 89 | MR Laserjet Monochrome Network Printer Supplyand Installation at site, Laserjet MonochromePrinterhavingLCDDisplay,with functions to copy and print, printresolution 600 dpix600dpi,20ppmprintspeed,Dutycycle minimum8000pagespermonth,24bitdepth, USB,Wi-Ficonnectivity.Make: hp/brother/canon/epson or equivalent |
| 90 | MR Visi Cooler / Pharmacy refrigerator : Supply, errection and commisioning of lab / pharmacyrefrigiratorasperfollowing specifications : Upright Showcase Coolers/refrigerators with Single Glass Door and Lock having 350-450 Litre capacity, Temperature range capability 1-10 degree celsius with Digital TemperatureControllerandDisplay,Minimum of 4 adjustable Shelves/Racks Recommended Make:CELFROST,BLUESTAR,VOLTAS, THERMO FISCHER |
| 91 | MR Supply,Installation,testingandCommissioning of all in One type desktop computers. 12th Generation Intel® Core™ i7/ AMD Ryzen 7 5thgenerationprocessor or better,GenuineWindows11 ProSinglelanguage,MSOfficeIntel®UHD Graphicswithsharedgraphicsmemory,min1.8 GHzbseclockspeed,16GB,DDR4,3200MHz, 1 TB SSD minimum 1.7 GHzbase clockspeed, 23.8 inch FHD (1920x 1080) Anti- Glare Narrow Border Non Touch Display, with keyboard, mouseandmousepad.Make:Dell/HPor equivalent |
| 92 | MR Supply,Installation,testingandCommissioning of all in One type desktop computers. 12th Generation Intel® Core™ i5/ AMD Ryzen 5 5thgenerationprocessor,GenuineWindows11 ProSinglelanguage,MSOffice,Intel®UHD Graphics with shared graphics memory, minimum 1.7GHzbaseclockspeed,8GB,DDR4, 3200MHz,512GBSSD,23.8inchFHD(1920x 1080),Anti-GlareNarrowBorderNonTouch Display, with keyboard, mouse and mouse pad. Make : Dell / HP or equivalent |
| 93 | MR Cash Counting Machine cum Fake Note Detector Make : Optimus-Model No.OLC 04 or equivalent |
| 94 | MR CashSafe(Coffer)Volume.14LMin WallThickness: 2.5 mm min for body and 5 mm min for door Recommended Make: Godrej make, ModelNo.PremiumCofferBRN(ltemCode: SEBP1112) or equivalent (only manual lockinq system) |
| 95 | MR CounterCommunicationSystem:Supply, installation, testing and commisioning of two way countercommunicationsystemincluding speaker,mike,controlunit,powerunitetcall required (make : Ahujaccs 2300 or equivalent) |
| 96 | MR WaterDispenser:Supplyanderrectionofwater dispensercanhold20litrewaterbottlehaving normalstanding designwith14liter refrigerator atbottom andhaving3temperaturetapshot, plain and cold. 3 liter cooling and 5 liter heating capacity per hour. Body made of ABS plastic and tankmadeofFoodgradestainlesssteel.Heavy duty bottle piercer with bottle holder. withmin 1 year warranty. (Make : voltas / Blue star/ equivalent) |
| 97 | AIR CONDITIONING WORK |
| 98 | MR SITC of Inverter Air Conditioner: Supply, installation, testing and commissioning of Air Cooled High Wall mounted Split Air Conditioner of following capacity consisting of high wall mounted type room unit (fan coil) with cordless remote control and one number outdoor condensing unit comprising of enegy efficient suitable rotary compressorfor operation on single phase, 230 V, 50Hz supply, fixing the outdoor unit on a raised platform as per manufacturers recommendation and fixing of room (fan coil) unit on wall, standard 3 m distance refrigerant copper piping with 13mm nitrile rubber insulation, providing and making interconnection between room& condenser as per site conditions, comprising of 1" dia drain PVC pipe with insulation 3m, canvas connections, full electrical cabling from power plug near indoor unit and to outdoor unit, ODU MS stand, first charge refrigarant gas, complete as required. ( Make : Voltas, Carrier, Blue Star, Siemens, Hitachi ) :1.0 TR 3 star rated as per BEE |
| 99 | MR Inverter Air Conditioner: Supply, installation, testing and commissioning of Air Cooled Cassette Air Conditioner of following capacity consisting of indoor room unit with cordless remote control and one number outdoor condensing unit comprising of enegy efficient suitable rotary compressorfor operation on single phase, 230 V, 50Hz supply, fixing the outdoor unit on a raised platform as per manufacturers recommendation and fixing of room unit on ceiling, standard 3 m distance refrigerant copper piping with 13mm nitrile rubber insulation, providing and making interconnection between room& condenser as per site conditions, comprising of 1" or 2" dia drain PVC pipe with insulation 3m, canvas connections, full electrical cabling from power plug near indoor unit and to outdoor unit, ODU MS stand, first charge refrigarant gas, complete as required. ( Make : Voltas , Blue Star, LG, Samsung, Carrier,Hitachi ) :Minimum 1.5 TR 3 star rated as per BEE |
| 100 | MR Supply and Installation of additional copper, drain piping with proper insulation in PVC truncking of size 100mm x 50mm and additional cable complete on wall/above false ceiling etc all complete. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
