}

Tender For Construction Of Community Toilet At Anaikaran Palayam Ward No. 47 In Kumbakonam City Municipal Corporation., kumbakonam-Tamil Nadu

Municipal Adminitration And Water Supply Department-MAAWSD has published Tender For Construction Of Community Toilet At Anaikaran Palayam Ward No. 47 In Kumbakonam City Municipal Corporation.. Submission Date for this Tender is 30-04-2024. Toilet Bathroom Tenders in kumbakonam Tamil Nadu. Bidders can get complete Tender details and download the document.




Tender Notice

43258385
Tender For Construction Of Community Toilet At Anaikaran Palayam Ward No. 47 In Kumbakonam City Municipal Corporation.
Open Tender
Indian
Tamil Nadu
kumbakonam
30-04-2024

Tender Details

Construction Of Community Toilet At Anaikaran Palayam Ward No. 47 In Kumbakonam City Municipal Corporation.

Key Value

Document Fees
Refer document
EMD
INR 9000.0 /-
Tender Value
INR 9 Lakhs /-

BOQ Items

Name of work:Construction of Community Toilet at Anaikaran palayamward no. 47 in Kumbakonam City Municipal Corporation.
Sl. No. Item Description
1Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc.,as per SS 20 A. TNDSS NO: 23 & 24 VI (S2) VI,VII 9,10with standard specifications.
2Narrow Excavation
3Supplying and filling with M. sand in layers of 15cm thick including watering and ramming to consolidation etc complete
4Plain Cement Concrete 1:4:8 mix using 40mm ISS gauge HBBG metal for foundation etc., complete
5Providing steel centering and shuttering with necessary strutting arrangements for sides and soffits of all RCC works etc complete
6Without strutting
7For Column & sunshade
8With strutting
9Reinforced Cement Concrete 1:1.5:3 mix using 20mm ISS gauge HBBG metal from the approved quarry including mixing, laying, consolidating, curing cost and conveyance of all materials to site and all labourcharges etc., complete as per standard specification
10Foundation & Basement
11Above GL Upto 4.5m
12Supplying cutting bending and fixing in position of RTS/MS grills including cost of steel and binding wire etc., complete
13Brick Work in Cement Mortar 1:5 mix using country bricks of size 8¾ x 4¼ x 2¾foundation etc., complete.
14Foundation & Basement
15For Super structure
16Special Ceiling Plastering for RCC slabs and beams with cement mortar 1:3 mix 10mm thick including hacking etc., complete
17Plastering in Cement Mortar 1:5 mix 12mm thick etc., complete
18Plastering in Cement Mortar 1:3 mix 12mm thick etc., complete
19Weathering course with concrete broken brick jelly 20mm size in pure slaked lime (no sand to be used) over RCC roof slab the proportion of broken brick jelly to lime being 32:12.5 well beaten with wooden beaters giving to required slope and thicknessetc., complete
20Finishing the top with one coarse of pressed tiles of size 20cm x 20cm x 20cm thick laid in C.M 1:3 mix with water proofing compound as per Indian std specification 2% weight of cement and pointing with same mortar etc ., complete.
21Dadooing and skirting the walls with white or colour glazed tiles of size 15 cm x 15cm x 6mm laid in cement mortar 1:2 mix 10mm thick and pointing with white cement using 0.40 Kg/m2incluidng finishing the joint and pointing flush with tiles surface etc., complete
22Supply and fixing in position of white glazed indian oriya type water closet 580 x 440mm size white glazed earthernware of approved quality with S or P trap confirming to IS: 2556-part XII with sand cusion and forming flooring around the closet using 40mm broaken brick jelly in lime concrete1:4:8 mix, 100mm thick using 20mm ISS gauge brick jelly and finished the top to required slop and including giving necessary connection to cast iron soil pipes by dismantling brick masonry, RCC/ floor slab and making good of the disturbed portion to original condition without leakage etc. complete complying with std. specifications and as directed by dept. officers etc.complete.
23Supply and fixing in position of European water closet with "S" (or) "P" trap of approved color and quality with dauble flapped rigid PVC sheet cover the CP brass hinges etc., complete complying with standard specification including supply and fixing in position of 10litre capacity glazed porcelain low level flushing tank on wall including 2 Nos of 15mm & brass nipple, 15mm dia PVC brass connection, 15mm dia GI wheel value, 15mm dia Nylon connection and giving necessary water supply connection etc., complete complying with standard specification
24Supply and fixing of wash hand basin, without pedestral, 15mm dia GM value, 32mm dia CP Waste, 32mm dia PVC waste pipe, 15mm dia brass nipple, 12/15 mm dia CP pillar tap, 15mm nylon connection, Plug and chain, CI Brackets including fixing the wash hand basin in the wall in position wiht a pair of CI bracket with teak wood plugs adn screws adn giving necesary water supply connection and painting the brackets with 2 coats of paint over a priming coat of anticorrosive paint including testing for leakage etc.,complete
25Supply and fixing of UPVC glazed Openable Door made out ofhallow multi cambered UPVC sections and corners & joint portions are mitre cut and fusion welded. The Outer frame of the Door shall be made out of UPVC sections having size of 104x60mm and the shutter frame shall be made out of UPVC sections having size of 72x60mm with necessary steel reinforcement at a hardware locations. The Top Glazing shall be of 5mm thick to be provided and Bottom shall be provided withUPVC panel of 8mm thick with single glaze beading shall be made out of size 34x18mm.and fixing with EPDMrubber beadingswith powder coated Handles,3D Hinges with multipoint locking system, including cost of all materials and labour charges for fixing in position etc., complete
26Solid PVC Door Shutters using 19 Gauge19mm MS square tubes for styles and outer frames.15mm MS square tubes for top, lock and bottom rails.The steel tubesshallbecoveredwith5mmthicksolidPVC Sheets.Shutter using 5mm thick solid PVC Sheets for panellingshallrigidlyfixedinpositionincluding necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm.The over all size of top rail,lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter (WITH FRAME)
27Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profilethe size frame 60mm x 58mm and shutter profile size of 60 x 78mm bothprofilesarereinforced withGI/1mm125GSM and100%corrosionfree,theprofilearemultichambered sections with wall thick of2mm.The EPDM rubber (black colour) covered with all over the edges of frame and shutter. Thecornersandjointsshouldbeweldedandcleaned. Radiations pin headed glass 4mm thick should be provided in the louvers.The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work
28Wiring with 2x1.5sqmm (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch boc 5A F.T. switch inflush with wall covered with hylum sheet of 3mm thick with painting of suitable color for concealed PVC light / fan point (for elctronic regulator) SD-24.
29Wiring with 2X 1.5 sqmm (22/0.3) PVC insulated Sc unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with 150x100x113mm TW switch box and 5A 3 pin non inter locking CS plug with painting of suitable color with continuous earth wire connection of 14SWG TC wire for concealed PVC plug point ( SD-38)
30Wiring with 2x4 sqmm(56/0.3) PVC insulated SC unsheathed Cu.Conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet for 15 A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire , and making good of the concealed portion, with suitable colour for concealed power plug point (SD.No.40)
31Supply and run of 2 of 6 sq.mm (84/0.3) PVC insulated SC unsheathes Cu. Conductor of 1100 V grade in 25mm dia GI pipe (Class B) bent at both ends with necessary angle iron up right and end suports for mains (SD 66)
32Supply and fixing of WT bulkhead fitting with guard (Philips/Bajaj/Crompton/K-Lite)suitable for 11WCFL lamp with CFL etc., complete. S.D.no:83
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail