Military Engineer Services-MES has published Tender For Repair To Plastering, Brick Work, Flooring, Joinery, Plumbing, Sanitary Fitting And Other Misc Work At Jcos/Or Md Accommodation In Zone-I Under Age B/R-Iii Of Ge (South) Meerut Cant. Submission Date for this Tender is 20-05-2024. Civil Work Tenders in meerut Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 13-May-2024 | Revised BOQ and Schedule of Credit | BOQ | 20-05-2024 |
| 2 | 16-May-2024 | Revised Schedule of Credit | Other | 20-05-2024 |
| FileName | File Description | File Size |
| dd9b0589-92ab-4364-b12d-aa3c9a942d0e.html | Tender Notice | 0 KB |
| BOQ_729236.xls | Tender Document | 0 KB |
| TenderdocumentsBR.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15 cm thick ( above or belowGL)complete all as specified and directed. |
| 2 | M&LCement concrete 1:3:6 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete including sub base of floors complete all as specified and directed. |
| 3 | Material & labour for 20mm thick PCC1:2:4type C-2 (using 20mm graded crushed stone aggregate) as in flooring, etc finished the surface even & fair complete all as specified and directed. |
| 4 | M&L 60mm thick colouredrubber moulded (comparising of red & yelow colour) interlockingpavers in approved design/colour setlaid over 50mm thick coarse sand complete all as specified and directed. |
| 5 | M&L for coloured chequered cement concrete tiles 30cmx30cmx20mm thick, set on CM (1:2), 12mm thick screed grouted with cement sand mortar 1:3 mixed with water proofing compound as per manufactures instructions and pointed in neat cement slurry in floors with grey cement and no pigment complete all as specified and directed. |
| 6 | Taking down of chowkhat with shutter (without taking off shutters from the frame) area n-exc 1.50 sqm each complete all as specified and directed |
| 7 | All as per item No 6.00 above but area exc 1.50 Sqm but n-exc 4.0 Sqm each complete all as specified and directed. |
| 8 | Taking down of sutters of any description n-exc 1.0 sqm each complete all as specified and directed. |
| 9 | Taking down of sutters of any description exc 1.0 sqm but n-exc 2 Sqm each complete all as specified and directed. |
| 10 | Supply and fixing for mild steel framed work as in doors / windows or gates of angle, with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting or other covering.Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or toeht covering runnign rails and guides) and hanging also fastening and fixing complete conforming to Fe 410-W (Gde-E-250) quality A complete all as specified and directed. |
| 11 | S&F 1mm thick mild steel plain, black sheet in wall cladding, steel gates and similior work, cut to size, holes, punched, including round headed screws, clout nails or rivets and fixed to wood or steel framing witn plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc complete all as specified and directed. |
| 12 | S&F for built in steel cup board with pressed steel frame of size 75mmX45mmX1.25mm thick with pressed steel shutter 1mm thick Godrej pattern fixed to massonary wall by hold fast made out of 25x3mm flat iron including MS hanging rod of 10mm dia with bracket fixed on inner side of one leaf of shutter and on other leaf provision of MS peg set of 3 pegs, locking arrengments including spray painting with two coats of synthetic enamel paint over a coat of red oxide primer to all around on steel surface of frame and shutter and making good distrubed portion in CM 1:3 or PCC 1:2:4, type B0 using 12.5mm graded stone aggregate complete all as specified and directed. |
| 13 | S&F pressed steel frames for doors with one or more rebates including necessary fitting lungs, hinges, lock strike plates etc completed size of frame 125x60mm made out of 1.25mm mild steel sheets complete all as specified and directed. |
| 14 | S&F pressed steel frames for doors with one or more rebates including necessary fitting lungs, hinges, lock strike plates etc completed size of frame 105x60mm made out of 1.25mm mild steel sheets complete all as specified and directed. |
| 15 | Material and labour for PCC 1:3:6 type C-1 (20mm graded agg) filling in pressed door chowkat/hold fast blocks complete all as specified and directed. |
| 16 | Supply and fixing made plain framed panelled shutter 35mm thick with lock rail and panel of 9mm BWP commercial ply or 12mm venered particle board with commercial veneering on both faces, the size of rail at stile as per IS: 1003 Pt-I kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 17 | Supply and fixing for 35mm thick glazed and skeleton shutters of 2nd class hardwood open nebated and prepaired to receive glass gauge etc, (with sash bars) edgeg of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. size of member of shutter as specified in SSR Pt-I section 8 clause 8.20(a) complete all as specified and directed. |
| 18 | S & F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. Note: stainless steel butt hinges and necessary S S screws shall be paid separately |
| 19 | S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made |
| 20 | Supply and fixing for 100mm long but hinges heavy duty cold rolled mild steel medium weight complete all as specified and directed. |
| 21 | Supply and fixing for aluminium anodised barrel tower bolts of extruded section and fixed of 150mm long complete all as specified and directed. |
| 22 | Supply and fixing for aluminium alloy anodised sliding door bolt 250mm long with haps staple bolt type and fixing clips of sheet etc complete all as specified and directed by Engr-in-charge. |
| 23 | Supply and fixing for 150mm long aluminium handles cast type anodized complete all as specified and directed. |
| 24 | Supply and fixing for 300mm mild steel ordinary rat rail rod pattern spring incl roller & roller plate complete all as specified and directed. |
| 25 | S&F Box type steel window comprised of tubular frame and shutters made out of 1.25mm thick MS Sheet tube with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes only shall be measured and paid seperately) with side hung shutters with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 150mm long for each leaf and 10mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks etc as including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed. |
| 26 | Hacking out old broken glasses (any thickness) size quality or description from wooden/steel frame complete all as specified and directed. |
| 27 | Supply & fix 3mm thick sheet glass, ordinary quality glazing with oil putty or fixed with wooden beads or in steel windows in square n.exc. 0.50sqm each pane incl one coat of synthetic enamel paint to oil putty complete all as specified & directed. |
| 28 | All as per item No. 27.00 above but pin headed glass 3 mm complete all as specified and directed. |
| 29 | Supply & fix galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified & directed. |
| 30 | Supply & fix in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified & directed. |
| 31 | S&F Brand Facroty Made 20mm thick 100% Solid WPC (Wood polymer Composite) plain Board of reqired size comprising of virgin PVC resin of K valve 57-60 (Suspension Grade), Calcium Carbonate and natural fibers (Wood powder/rice husk/ wheat husk) and non toxic additives, made from Extrusion process WPC foam sheet single Extruded (Inner) with density not less than 650Kg/cbm manufactured by as ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawal strength of 2000N (Face) & 1100N (Edge), minimum compressive strength of 50 n/Sq.mm, modulus of elasticity 850N/Sq.mm and resistance of spread of flame of class A category with property of being Termite/Borer Free. Water/Moisture proof, Fire Retardant and fixing with stainless steel but hinges of required size with necessary full body threaded star headed counter sunk SS Screws. Material test certificate and authentication should be complusary provided by the manufacturing company for Cabinate/Kitchen cupboard including 35mm necessary frame complete all as specified and directed. |
| 32 | Material and labour for preparation of new wooden surface and applying two coat of synthetic enamel paint over a coat of pink primer including preparation of surface, over 10 cm widthor girth complete all as specified and directed. |
| 33 | Material and labour for two coats of synthetic enamel paint over one coat of red oxide primer on new steel surface incl preparation of surface over 10cm widthor girth complete all as specified and directed. |
| 34 | Supply and fixing for 20 mm dia mild steelpowder coated curtain rods with wall thickness 1 mm including mild steel powder coated, bracket, holding and funnel on ends as fixed in repairs complete all as specified and directed by Engr-in-charge. |
| 35 | Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 36 | Material & labour for non AC fiber sheet cement6mm thick corrugated or semi corrugated sheets fixed in roofs with J or L hooks including bitumen washer complete all as specified & directed . |
| 37 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed. |
| 38 | Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed. |
| 39 | S&F structural steel work for in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 gde St-240 complete all as specified and directed. |
| 40 | Supply and fixing in repair 15mm bore bib taps. Standard of PTMT any colour high pressure screwed for iron pipe (minimum weight of pillar tap 90 gms) complete all as specified and directed by Engineer-in-Charge. Make : Symet/ Prayag/Polytuf. |
| 41 | Supply and fixing in repair 15mm bore bib tap fancy type chromium plated long body cast copper alloy screwed down for iron pipes or for brass ferrule complete all as specified and directed by Engineer-in-Charge. |
| 42 | Supply and fixing in repair 15mm bore pillar taps cast copper alloy fancy type chromium plated screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and directed by Engineer-in-Charge. |
| 43 | Supply and fixing in repair 15mm bore stop valve/angle valve fancy type chromium plated cast copper alloy screwed down high pressure screwed both ends for iron pipe or for union complete all as specified and directed by Engineer-in-Charge. |
| 44 | Supply and fixing in repair looking mirror 600x450 mm bevelled edges of selected quality glass mounted on 6mm commercial ply or AC building board with aluminium frame around and fixed to wooden plugs with CP brass screws complete all as specified and directed by Engineer-in-Charge.Make : Atul/Modi Guard/Swastik. |
| 45 | Supply and fixing in repair looking mirror 1200x450 mm bevelled edges of selected quality glass mounted on 6mm commercial ply or AC building board with aluminium frame around and fixed to wooden plugs with CP brass screws complete all as specified and directed by Engineer-in-Charge.Make : Atul/Modi Guard/Swastik. |
| 46 | Supply and fixing PVC connections 15mm bore, 450 mm length with PTMT nuts complete all as specified and directed by Engineer-in-Charge. Make : Symet/ Prayag |
| 47 | All as per item No 46.00 here-in-before but length 600mm complete all as specified and directed. |
| 48 | Supply and fixing in repair cast copper alloy chromium plated shower rose fancy type fixed to 15mm bore pipe complete all as specified and directed. |
| 49 | Supply and fixing in repair brass chromium plated tubular towel rail 20mm dia ‘D’ type 60 cms long between flanges complete all as specified and directed. |
| 50 | Supply and fixing in repair PVC valveless, syphonic action type, flushing cistern, 10 ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets and PVC bend including connection to IWC/EWC and fixing on wall with brackets complete all as specified and directed by Engr-in-charge.Make : Hindware/Paryyware /Prayag /Polytuff |
| 51 | Supply and fixing in repair vitreous china squatting pan white orissa pattern size 580x440mm with integral foot rests (excluding flushing cistern & flush pipe) with cast iron P trap including lime concrete bedding and making good the disturbed portion to match with the existing surface of floor complete all as specified and directed by Engineer-in-Charge. Make : Parry ware/CERA/Hind Ware |
| 52 | Supply and fixing in repair vitreous china wash down water closet pan (Pedestal Pattern) white excluding flushing cistern and flush pipe including plastic water closet seat white/black, connection to out going pipe and flushing pipe complete all as specified and directed by Engineer-in-Charge.Make : Parry ware/Hind ware/CERA |
| 53 | Supply and fixing in repair vitreous china wash down water closet pan single piece wc with including PP soft close slim seat cover with complete accessories of size 365x675x740mm S Trap 220mm white complete all as specified and directed by Engineer-in-Charge (Code: ECS-WHT-851S220SPPSM. Make:CERA |
| 54 | S&F in repair plastic water closet seat, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed by Engineer-in-Charge. |
| 55 | Supply and fixing in repair vitreous china wash basin white flat back size 580x 450mm excluding taps but incl 32mm dia CP waste fitting and PVC waste pipe 610 mm long and brackets complete all as specified and directed by Engineer-in-Charge.Make Parryware/CERA/Hindware |
| 56 | Supply and fixing in repair vitreous china wash basin white oval type size 580x 450mm excluding taps but incl 32mm dia CP waste fitting and PVC waste pipe 610 mm long and brackets complete all as specified and directed by Engineer-in-Charge. Make Parryware/CERA/Hindware |
| 57 | Supply and fixing in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs washers and wasters incl bedding in cement mortar to dwarf walls or incl fixing cantilever brackets and connecting union to pipe over all size (915mmx460mm bowl size 410x330x160mm) complete all as specified and directed by Engineer-in-Charge. Make Hindustan/JINDAL |
| 58 | Taking down steel tubing and connections incl cleaning for refixing or removal from site for 15 mm bore pipe complete all as specified and directed by Engineer-in-Charge. |
| 59 | All as per item No 58.00 here-in-before but for 20 mm bore pipe |
| 60 | Supply and fixing 15 mm bore tubes medium grade galvanized with all fittings and fixed complete to walls and ceilings or laid in floors of any length complete all as specified and directed by Engineer-in-Charge.Make : JINDAL/PRAKASH/TATA |
| 61 | All as per item No 60.00 here-in-before but for 20 mm dia |
| 62 | Refixing old steel tubing 15mm bore and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed by Engineer-in-Charge. |
| 63 | Refixing old steel tubing 20mm bore and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed by Engineer-in-Charge. |
| 64 | Supply & fix in repair PVC waste pipe 32mm dia for wash hand basincomplete all as specified and directed. |
| 65 | Supply & fix in repair glass self assembly made of 5 to 6 mm thick sheet glass of size 600 x 120mm fixed with CP brackets complete all as specified |
| 66 | Supply & fix in repair glass corner shelf assembly fancy type made of 6 to 7 mm thick sheet glass of size 250x 250mm fixed with CP brackets complete all as specified and directed. |
| 67 | Supply & fix in repair chromium plated, ABS plastic with stainless steel tube with PVC holder jet health faucet fixed in WC seats complete all as specified and directed. |
| 68 | Supply & fix in repair brass chromium plated wall mixer suitable for both telephonic shower and overhead shower with long bend pipe complete all as specified & directed. |
| 69 | Supply & fix in repair 15mm dia single lever one hole basin mixture of superior quality with capstan heads, cromium plated cast copper alloy with hot and cold arrangements with long shank and cup , screws for iron pipe fixed.as in repairs Make all as specified and directed |
| 70 | Supply and fixedin repair vitreous china urinal, Half stall type,white with grating, union for discharge pipe, flush pipe and waste pipe, CP urinal Spreader fixed to water supply pipe etc complete all as specified and directed by Engr-in-Charge. |
| 71 | Supply & fixing in repair steel CP grating 100/125 mm dia incl waste hole where required at site complete all as directed by Engineer-in-Charge. |
| 72 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 73 | Supply and fix non skid glazed ceramic tiles(any shade) 400mmx400mmx7mm to 8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor including 15mm thick screed bed in CM 1:6 complete all as specified and directed.(Make: Kajaria/Somany/Orient). |
| 74 | Supply & fix Light shade vitrified double charged tiles coloured superior quality 600mm x 600mm x 8 to 10mm thickset and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor including 10mm thick screed in CM 1:4 and all as per manufacturer"s instruction complete all as specified and directed. (Make- Kajaria / Somany /Johnson / Orient). |
| 75 | Supply & fix Light shade charged tiles coloured superior quality 600mm x 600mm x 8 to 10mm thickset and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor including 10mm thick screed in CM 1:4 and all as per manufacturer"s instruction complete all as specified and directed. (Make- Kajaria / Somany /Johnson / Orient). |
| 76 | All as per item No. 75.00 here-in-before but in skirting / dado and including 10 mm thick screed bed CM1:6 complete all as specified and directed. (Make-Kajaria/Somany/Orient). |
| 77 | Material & labour for coloured glazed ceramic tiles of approved shade of size 450mm x300 mm x 7 to 8 mm thick laid in Dado etc set and jointed in white or coloured cement to match the existing surfaces laid over and including 10mm thick rendering in CM 1:4, complete all as specified and directed. |
| 78 | M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as spd & directed |
| 79 | M&L for Udaipur Green Stone polished 12 to 14mm thick(table rubbed &polished) in steps, jambs, window cills, cooking platforms, sink and the like in CM 1:4 incl pointing in white cement mixed with pigment to match shade of stone incl rounding of edges and making holes for gas pipe complete all as specified and directed. |
| 80 | Supply and fixing in repair stain less steel plate rack of size and design as approved of GE/Engr-in-charge made out of 1.00mm thick stainless steel (Salem sheet) and having weight between 9.0 Kg to 9.5 Kg each complete all as specified and directed by Engineer-in-Charge. |
| 81 | M & L machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc completed all as specified. |
| 82 | M&L 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as spd and directed. |
| 83 | Taking down cement or cement lime plaster on brick or stone walls, etc including racking out joints, hacking for key, scrbbing down with water etc complete and specified |
| 84 | Demolition of brick work built in cement mortar of any description . |
| 85 | Brick work with fly ash bricks, straight or curved on plan exceeding 6 mtr mean radius built incement mortar (1:6) complete all as specified. |
| 86 | M&Lbrick work with sub class" B" bricks(except bricks) of old size,straight or curved on plan exc 6 m mean radius built in cement mortar 1:6. |
| 87 | Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 etc complete |
| 88 | M&L for applying 15mm thick rendering using ready mix plaster bags on brick or concrete surface of external/external wall finished even and smooth. Note: contractor is required to deposite ready mix bags for 100% CA quantity to Engr-in-Charge with in 15 days of acceptance of contract. Make: Ultratech, Rediplaster, Birla, Aeccrocem. |
| 89 | M&L for applying 5mm thick rendering using ready mix plaster bags on brick or concrete surface of ceiling finished even and smooth. Note: contractor is required to deposite ready mix bags for 100% CA quantity to Engr-in-Charge with in 15 days of acceptance of contract. Make: Ultratech, Rediplaster, Birla, Aeccrocem. |
| 90 | Materials & labour for preparation of new plastered surface of walls etc andapplying two coats of OBD over and including a coat of Birla/JK wall care putty to match the existing surfaces of wall as required complete all as specified & directed Make : Asianpaint/Berger. |
| 91 | Materials & labour for preparation of old plastered surface of walls etc andapplying two coats of OBD over and including a coat of Birla/JK wall care putty to match the existing surfaces of wall as required complete all as specified & directed Make : Asianpaint/Berger. |
| 92 | Materials & labour for preparation of new plastered surface of ceiling etc andapplying three coats of white wash complete all as specified & directed. |
| 93 | All as ser item No. 92.00 above but one coat on old ceiling surfacecomplete all as specified and directed. |
| 94 | M & L preparation of newplasteredsurface of wall and applyingtwo coat of cement base paint after one coat of chalk whiting primer on wall complete all as specified and directed. |
| 95 | M & L preparation of oldplasteredsurface of wall and applyingtwo coat of cement base paint after one coat of chalk whiting primer on wall complete all as specified and directed. |
| 96 | Supply and fixedDouble action floor spring hydraulically door closer regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed etc complete all as specified and directed by Engr-in-Chagre |
| 97 | S&F 110mm PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall/ laid under floor etc in waste pipes and rain water pipes complete all as spd & directed |
| 98 | All as per item No 97.00 above but 75mm dia bore pipe complete all as specified and directed. |
| 99 | Suply and fix in repair 75mm bore PVC (SWR) bends any redious complete all as specified and directed. |
| 100 | Supply & fix in repair75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 101 | Suply and fix in repair 110mm bore PVC (SWR) bends any redious complete all as specified and directed. |
| 102 | Supply & fix in repair 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 103 | Supply & fix in repair 110 PVC (SWR) vent cowl complete all as specified and directed. |
| 104 | Supply & fixing 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical, vertical in closed top) hoisted and fixed in position all as specified in SSR Part-I including dismantling water tanks, 20mm brass float valve and removing to store complete all as specified & directed. |
| 105 | All asper item No 104.00but for 1000 lt capacity PVC water tank complete all as specified and directed. |
| 106 | Supply & fixing in repair PVC ball valves, high pressure with polyethylene float and fly nut complete screwed for iron pipe 15mm/20mm bore complete all as specified & directed. (Make : Prayag / Pearl) |
| 107 | Demoletion of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) incl removing rubbish off the premises complete all as spd & diected, |
| 108 | M&L for precast reinforcement cement cement comcrete (1:2:4) type B-1 using 20mm graded stone aggregate as in landings, chullah hoods, chajjas, water troughs, mangers shelves and similar articles set in CM (1:6) incl all necessary form works and finishing exposed concerete surface complete all as spd & directed. |
| 109 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards / slabs / blankets any thickness including cover fillets. |
| 110 | Supply and fixing for anodised aluminium snap grid frame work of size 605 x 605 mm, for false ceiling comprising 40 x 25 x 2mm aluminium angles weight 0.36 kg fixed all along the wall at ends and with aluminium main and cross tee of size 36.50 mm x 25 mm x 1.4 mm weith not less than 0.24 kg per RM including aluminium cleat bolts nuts and washers and 4mm dia GI wire suspenders in alternates panel and preparing holes / chases in wall for fixing angle including fixing suitable for non asbests fibre cement boards in ceiling complete all as specified and directed by Engr-in-charge. |
| 111 | Material and labour for 4 mm thick Armstrong ceiling boards 600 x 600 mm, fixed or laid / inserted to timber / GI / Aluminium frame work with screws in ceiling and applying three coat of white wash including preparation of surface complete all as specified and directed by Engr-in-charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
