Military Engineer Services-MES has published Tender For Repair To Boundary Wall Path Security Fencing Drain And Misc Work Under Age B/R_I Ge Af No2 Jodhpur And Repair To Roof Treatment And Sunken Floor Including Sanitary Fittings Under Age Br-I Ge Af No 2 Jodhpur. Submission Date for this Tender is 16-05-2024. Wall construction Tenders in jodhpur Rajasthan. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| e68c6871-7331-4006-8b2d-35048f5e821a.html | Tender Notice | 0 KB |
| BOQ_729127.xls | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Tender_8450.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for (roof padding, flooring above ground floors) including roof treatment and removing from site all as specified and directed. |
| 2 | M&L 10 mm thick screed bed with CM 1:4with water proofing compound @ 3% by weight of cementfinish even and smooth surfaces using without extra cement. Water proofing compound shall be measured and paid seperately as directed by Engineer-in-Charge. |
| 3 | Supply only integral water proofing compound ISI marked. |
| 4 | Wire brushing and cleaning top surfaces of tarrace or cement concrete including dismantling existing old roof treatmentand junction of parapets as directed by Engineer-in-Charge |
| 5 | M&L for applying roof treatment on top of roof with APP modified membrane (minimum 3 mmthick) with non-woven polyster reinforcement/mat (centre core) with thermal insulation with white mineral gravel finish on upper side of membrane laid by torch application method with overlaps 100mm on length side and 100 mm on the width side as per manufacturer’s instructions over and including a coat of approved cold applied bituminous oil based primer (IS- 3384) @ 250 gm/sqm over cleaned roof surface complete all as specified and as directed by Engineer-in-Charge. |
| 6 | Disconnecting existing tanks of any description exc. 250 ltrs and n.exc. 500 ltrs capacity and removing from site. |
| 7 | Disconnecting existing tanks of any description exc. 500 ltrs and n.exc. 1000 ltrs capacity and removing from site. |
| 8 | S&F 500 litres (ISI marked) capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top thread type cover), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20 mm bore ball brass valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic plastic ball screwed for iron pipe and fixed. (Minimum weight of ball valve - 210 gms) |
| 9 | S&F 1000 litres (ISI marked)capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top thread type cover), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20 mm bore ball brass valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic plastic ball screwed for iron pipe and fixed. (Minimum weight of ball valve - 210 gms) |
| 10 | Taking up or down steel tubing 15mm bore and connections removing from site. |
| 11 | Taking up or down steel tubing 20mm bore and connectionsremoving from site. |
| 12 | Supply and laying 15mm bore tubes, galvainzed steel, medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors all as specified and directed. |
| 13 | Supply and laying 20mm bore tubes, galvainzed steel, medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors all as specified and directed. |
| 14 | S&F in repair for 110 mm PVC(SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors,wallsheight upto 12.0 m with required number of PVC clamps incl fixing make: Prince or supreme or eqvilant complete all as specified and directed. |
| 15 | S&F in repair for 110 mm bore PVC (SWR) bend, suitable for type ‘A’ pipes, any radius. |
| 16 | S&F 75 mm bore UPVC (SWR) pipes type ‘A’, single socketed, in any length with rubber ring joints fixed to walls. |
| 17 | S&F in repair for 75 mm bore PVC (SWR) bend, suitable for type ‘A’ pipes, any radius. |
| 18 | Taking down cement plaster on walls any description incl raking out joints, hacking for key and scrubbing down with water etc |
| 19 | M&L rendering 15mm thick in CM (1:4) on external surfaces of walls mixed with water proofing compound on stone masonry/concrete surface or brickwalls finished even & smooth without using extra cement.Note : WPC shall be measured & paid seperately. |
| 20 | Dismantling floors hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises. |
| 21 | Demolition of brick/stone work built in cement mortar or cement lime mortar incl all quoins, arches, pillars etc but excluding washer facing dressed stone work and precast concrete articles. |
| 22 | M&L walling of square rubble, regular coursed, well bonded, bedded and solidly hearted , built in CM 1:6 |
| 23 | M&L rendering 10mm thick in CM (1:3) on sunken concrete floor surfaces mixed with integral water proofing compound finished even & smooth without using extra cement.Note : WPC shall be measured & paid seperately. |
| 24 | M&L applying bitumen blown any grade, applied hot, two coats, to concrete surfaces at the rate of 1.5kg per sqm per coat. |
| 25 | S&F polythene film, black, 50 micron laid in floors. |
| 26 | M&L for plain cement concrete 1:5:10 (type E-2) using 40mm graded brick course aggregate as in sunken slabs, complete all as specified and directed by the Engineer-in-Charge. |
| 27 | S&F in repairs vitreous china squatting pattern (IWC) of orissa pattern long pan of size 580mm, white with P or S trap, front or back inlet and footrest complete.Flush pipe of polyethylene of low or high density or PVC 32mm dia, for low level cistern. |
| 28 | S&F in repair vitreous china premium/1st quality wash down water closet wall hung EWC white/ivory/off white (closed pattern incl all necessary accessories like rag bolts/gel gasket etc. (including flush pipe) complete in all respect al |
| 29 | M&L PVC (SWR) floor trap 75mm dia of outlet, plain with grating including jointing with solvent cement fixed in repairs. |
| 30 | S&F gratings doom 100mm dia of PTMT (min wt 25 gms). |
| 31 | S&F for in repairs of vitreous china wash basin, white, flat back, size 550 x 400mm including waste coupling, waste pipe and labour for fixing pillar tap, PVC connection but including cutting for and pinning in ends of and including brackets complete all as specified and directed.Note : Pillar tap and PVC connection will be measured paid seperately. |
| 32 | S&F in repairs PVC flushing cistern 10 ltrs capacity, low level, white with inlet, ball valve, float and handle including brackets fixed in repairs. |
| 33 | S&F in repairs bib tap cast copper alloy fancy type chromium plated 15mm bore fixed in repairs. |
| 34 | S&F in repairs stop valves cast copper screwed down high pressure fancy type screwed both ends for pipe or union fixed for 15mm bore fixed in repairs. |
| 35 | S&F for in repairs 15mm, pillar taps fancy type long body chromium plated, cast copper alloy with capston heads, screwed down high pressure, with or without lettered "hot" or "cold" with long screwed shanks and flynuts, screwed for iron pipe complete all as specified and directed. |
| 36 | S&F for in repairs 15mm dia PVC connection with PTMT nuts of length 450mm, complete all as specified and directed. |
| 37 | M&L for coloured non skid ceramic tiles of size 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.06Sqm but n.exc 0.11 Sqm in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over 20mm screed bed in CM 1:6for lying floor finishes. |
| 38 | M&L for coloured glazed ceramic tiles of size 450x350x7mm thick on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match.Over rendering 10mm thick in CM 1:4. |
| 39 | M&L ranking out joints/pointing to squared rubble masonry coursed or incoursed built in cement mortar or cement lime mortar. |
| 40 | M&L keyed pointing on squared rubble masonry coursed or uncoursed (Bangalore Pattern) in cement mortar 1:4 |
| 41 | Making arrangement of scaffolding in buildings, cutting of small trees/plants at the stem, removal of the roots of the plants by using acids, cutting around the spot for removing the roots any size and making good with cement mortar 1:3 or with PCC 1:2:4 including finishing with exiting complete all as directed by Engineer-in-Charge. |
| 42 | M&L Renewing Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm in patches, area n exc 5 sq.m. including removing and cleaning old tiles, match with existing surface and set and jointed in neat cement slurry andpointed in white or coloured cement to match, over and incl 15mm thick cement screed 1:6all as specified and directed. |
| 43 | Disconnecting existing tanks, any capacity, setting aside (or lowering if required) for repairs of roofs and hoisting if required, reconnecting and refixing in position (Repairs to roofs measured separately). |
| 44 | S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 mtr long flexble tube ABS wall hook including making connections and fixed complete in all respect as specified |
| 45 | S&F in repairs PVC waste pipe of 32/40 mm boreof suitable length for WHB/urinal/sink, complete all as specified. |
| 46 | S&F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed |
| 47 | S&F in repairsaluminium anodised towel rail, 20mm dia, D type, 60cm long between flanges. |
| 48 | S&F in repairs 15 mm bore brass chromium plated bib cock two in one with angle cock including fixing to steel pipe or union all as specified. |
| 49 | Excavation in post holes or similar holes each n.exc 0.50 cum, getting out and returning, filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25 cm, watering and removing surplus soil to a distance n.exc 50 mtr and making good to surface in any type of soil. |
| 50 | M&LPCC 1:3:6 type C-2 ( with using 40mm graded stone aggregate)asin foundation filling andmass concrete, complete all as specified and directed. |
| 51 | Dismantling posts or struts embeded in concrete(wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified. |
| 52 | S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 all as directed by Engr-in-charge |
| 53 | S & F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing completeconfirming Fe 290 Gde-165. |
| 54 | S & F in repair Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (eachline wire to be measured) |
| 55 | M&L for two coats of synthetic enamel paint over a coat of red oxide primer on newly untreated surfaces of steel over 10 cm in width or girth not otherwise described. |
| 56 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed. |
| 57 | Supply only GI chain link fencing including line wires any mesh andany size and type to any type of standards rails etccomplete all as specified and directed. |
| 58 | S & F screw bolts (machine made) with hexagonal or sqare heads at one end and screwed the other each screw to be fitted with one hexagonal or square nut length of bolts n exc 10 cm and dia of shank 5-10mm. |
| 59 | S & F in repair razor type concertina coil hot galvanised spring tensile wire fixed on Y shape angle iron having baebed wire and coil having 6 to 8 Rm per coil of 900 mm dia and minimum weight 7.5 KG / Coiletc allas specified and directed |
| 60 | Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. |
| 61 | M & L preperation of new steel surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint with two coat synthetic enamel paint complete. |
| 62 | Demolition of stone/Block masonary built in cement mortarof any description and in any position not otherwise specifically provided forall as specified. |
| 63 | M&L for Walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in cement mortar1:6 allas specified and directed |
| 64 | M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc. as specified and directed |
| 65 | M&L for cement concrete Type B1 (1:2:4) (20 mm graded aggregate) asin coping , benching & kerb or mud stopallas specified and directed |
| 66 | M&l for raisedpointing to , to squared rubble masonry, coursed or uncoursed cement mortar 1:3 allas specified and directed |
| 67 | Demolition of cement concrete (unreinforced) in ground floor or paving of any description and in any position not otherwise specifically provided forall as specified. |
| 68 | M&L for 100 mmplain Cement concrete type B-1, 1:2:4 (20mm gradedaggregate) as in hardstanding /pavement allas specified and directed |
| 69 | M&L forForming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade Ballas specified and directed |
| 70 | M & L 100 mm thick PCC 1:4:8 type D2 ( Using 40 mm graded stone aggregate) as in sub base complete all as specified and directed. |
| 71 | Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement pigment complete all as specified and directed |
| 72 | Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 73 | M&L welding in repairs exe 2.5 cm but not exe 5 cm in length thickness of matel to be welded exe 6 mm but not exe 9mm all as spacified as directed by Engineer in charge. |
| 74 | M & L PCC 1:2:4 type B-2 (20 mm graded aggregate) in walls or retaining walls, any thickness, size or shape including plasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) as directed by Engineer-in-Charge. |
| 75 | Use and waste of form work to sides of concrete foundations, footing, bases of columns raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical ot to batter for flat of rought finished surface of concrete complete as specified as directed by Engineer-in-Charge. |
| 76 | M & L Pre-cast cement concrete type C1 1:3:6 20 mm graded aggregate block masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:6, complete all as specified and as directed by Engineer -in- Charge |
| 77 | M&L chequered cement concrete tiles 20cm x 20cm x 25mm thick with grey cement and pigment, machine pressed, set, jointed and pointed in neat cement slurry in floors including 15 mm thick screed bedding layer in C:M 1:6 complete all as specified and directed. Make Johnson or other make mentioned in Appendix "A". |
| 78 | M&L 15 mm thick rendering on concrete surface/ stone masonry/ brick surface in cm 1:4, finished even and fair faces complete all as specified & directed by Engineer-in-Charge. |
| 79 | M & L for preparing of plastered surfaces of walls and applying two coat of cement based paint over a coat of primer chalk whiting complete all as specified as directed by Engineer-in-Charge. |
| 80 | Preparing old painted steel & iron surfaces of any description over 10cm in width or girth and M&L for applying one coat of synthetic enamel paint complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
