Military Engineer Services-MES has published Tender For Repair/Replacement Of Certain B/R Work Including Joinery And Periodical Services In Various Bldgs At South Camp, West Camp, Motigarh, Pugal, Ascon Nodes Under Age Mffr Under Ge (N) Bikaner. Submission Date for this Tender is 25-05-2024. Civil Work Tenders in bikaner Rajasthan. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 13-May-2024 | Revised BOQ | BOQ | 25-05-2024 |
| FileName | File Description | File Size |
| 03fcff77-e823-49ae-bb2d-9616f34ab3f1.html | Tender Notice | 0 KB |
| BOQ_729205.xls | Tender Document | 0 KB |
| Tender07.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thick (below or above ground level) including floor tiles of any description complete all as specified & as directed. |
| 2 | Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed. |
| 3 | Taking down cement plaster or cement lime plaster, terrazo etc on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc, complete all as specified and as directed. |
| 4 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and as directed. |
| 5 | Dismantling of stone slabs and tiles of any description or any thickness in floors, dado etc, laid bedded and pointed in any mortar, complete all as specified & as directed. |
| 6 | Dismantling chain link fencing wire mesh, any type complete all as specified & as directed. |
| 7 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and as directed. |
| 8 | Dismantling structural steel work including doors, gates but excluding framed trusses etc, complete all as specified and as directed. |
| 9 | Taking down shutters (including fittings & fixtures) of any description exc 1 Sqm and not exc. 2 Sqm each, complete all as specified and as directed. |
| 10 | Taking down chowkat or frame with shutters (including fittings & fixtures) area not exc 1.5 Sqm each (without taking off the shutters from the frame) of door/window including cutting holes for taking out hold fasts and making good the same including disturbed portion of jambs, cills, etc complete all as specified and as directed. |
| 11 | Taking down chowkat or frame with shutters (including fittings & fixtures) area exc 1.5 Sqm but not exc 4 Sqm each (without taking off the shutters from the frame) of door/window including cutting holes for taking out hold fasts and making good the same including disturbed portion of jambs, cills, etc complete all as specified and as directed. |
| 12 | Taking down old rusted & damaged steel windows/ventilators of any description and of any type & size without guard bars / grill including cutting holes for hold fasts & making good the disturbed portion complete all as specified & as directed. |
| 13 | Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25cm, watering, and removing surplus soil to a distance not exc 50 m and making good surface in soft/ loose soil complete all as specified & as directed. |
| 14 | M&L for anti-termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified & as directed. |
| 15 | M&L for anti-termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified & as directed. |
| 16 | M&L for PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregate as in foundations, filling and mass concrete, sub base to floors and paving etc complete all as specified and as directed. |
| 17 | M&L for PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed. |
| 18 | M&L for PCC 1:3:6type C0 (using 12.5mm graded crushed stone aggregate) as in filling up chowkat/frame hollows and similar workscomplete all as specified and as directed. |
| 19 | Supply only integral liquid water proofing compound (ISI marked) complete all as specified & as directed. |
| 20 | M&L for brick work with old size Fly Ash bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6 complete all as specified and as directed. |
| 21 | M&L for 25-30mm thick sand stone slab in sunshades, chajjas,shelves, cills, landings, cover stones, templates etc not exc 2m in length, punched dressed on face and along exposed edges, self faced on the other side and set and pointed in cement mortar 1:4, including demolition of existing RCC Chajja/slab ceiling of any size complete all as specified and as directed. |
| 22 | M&L for Jodhpur stone roof slabs, self faced 7.5cm to 10cm thick, 25cm to 35cm wide, hoisted and set, jointed and grouted in cement mortar 1:3 complete all as specified & as directed. |
| 23 | S&F plain, solid, straight chowkats and frames of second class hardwood, wrought, framed rebated on the solid rounded or chamfered, put together with glue, pinned at joints, complete all as specified & as directed. |
| 24 | Supply and fixing factory made 30mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24(a) of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified & as directed. |
| 25 | S&F factory made 30mm thick flush shutter, solid core construction, with block board core and plywood face panels, both faces covered with decorative face veneer with lipping to match complete all as specified and as directed. |
| 26 | S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour single piece extruded PVC profile reinforced with MS square tube, fixing in opening as per specifications complete all as specified and as directed. |
| 27 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with plain colour single piece extruded PVC profile ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour single piece extruded PVC profile for top rail lock rail bottom rail on either side and as gap insert for Top rail and bottom rail paneling of plain colour PVC sheet to fitted on the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and as directed.. |
| 28 | S&F 100mm long butt hinges, medium weight, cold rolled mild steel (ISI marked) complete all as specified and as directed. |
| 29 | S&F 150mm long mild steel barrel tower bolts, stove enameled black with bright bolts and fixed complete all as specified and as directed. |
| 30 | S&F 150 mm long aluminium anodized barrel tower bolts of extruded section (ISI marked) complete all as specified. |
| 31 | S&F 150mm size aluminium handle, cast type, powder coated, complete all as specified & as directed. |
| 32 | S&F mild steel pressed handle, 150 mm size, oval type, stove enameled black complete all as specified and as directed. |
| 33 | S&F in repair mild steel pressed handle, 150 mm size, oval type, stove enameled black complete all as specified and as directed. |
| 34 | S&F 250mm long mild steel sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, stove enameled black, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified & as directed. |
| 35 | S&F in repair 250mm long mild steel sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, stove enameled black, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified & as directed. |
| 36 | S&F 250mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed. |
| 37 | S&F in repair mild steel 300mm ordinary rat tail rod pattern spring including roller and roller plate, complete all as specified & as directed. |
| 38 | Supply and fixing Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 39 | Supply and fixing Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, fixed in repairs, complete all as specified and as directed. |
| 40 | S&F in repairs mild steel chromium plated tubular curtain/drapery rod 20mm dia (in lengths as directed) with & including pair of projecting type fancy mild steel chromium plated brackets fixed at both ends with PVC rawl plug & steel screws on walls/beam complete all as specified & as directed. |
| 41 | S&F factory made pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, made out of mild steel sheet of 1.25 mm thickness, complete as specified & as directed. |
| 42 | S&F factory made pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, made out of mild steel sheet of 1.25 mm thickness, complete as specified & as directed. |
| 43 | S&F factory fabricated pressed steel frame/box windows, ventilators with glazed and fly proof shutters provided to size and dimensions as specified & shown on drawing No. BTD-888R Sheet No. 1/5 to 5/5 & BTD-889 Sheet No. 1/4 to 4/4 with & including MS grill, MS fillets, pintol hinges, tower bolts, MS handles, peg stays, MS lugs, locking arrangement, dash through bolt where required, etc complete all as specified & as directed. Notes : (i) PCC for filling in frames, glass, wire gauge and painting shall be measured & paid for separately under respective items.Provision of all other items as shown & specified on drawings shall deemed to be included in quoted rate of this item. (ii) The quoted rate shall deemed to include provision of cutting holes of suitable depth in walls for inserting lugs etc and making good dismantled portion in PCC 1:2:4 type B0 using 12.5mm graded crushed stone aggregate and CM (1:3). |
| 44 | S&F factory made steel ventilator with top hung shutter including hinges, steel peg stay, handle complete all as specified & as directed. |
| 45 | S&F Anodised aluminium work as in frame & shutters for doors, windows, ventilators, wall partitions, including joining cleats, glazing clips, snap beading, screws for fixing, etc., all aluminium sections as per relevant IS, complete all as specified & as directed. Note : Glass and rubber neoprene packing / rubber gasket shall be measured and paid for separately as “Supply only” under respective item of this Schedule. |
| 46 | Supply only rubber neoprene packing / rubber gasket of required size & profile suitable for aluminium frame work in doors, windows, etc complete all as specified & as directed. |
| 47 | S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified complete as directed and all as specified. |
| 48 | Fixing only mild steel galvanized chain link fencing, any mesh, size and type to any type of standards, rails, straining bolts etc. including provision of binding wire complete all as specified and as directed. Note :- Supply only chain link fencing shall be measured and paid for separately. |
| 49 | Supply only mild steel galvanized chain link fencing, any size or type as directed complete all as specified and directed. Note : The weight of chain link fencing shall be ascertained by BOO as ordered by GE and payment shall be made accordingly |
| 50 | Supply & fixing mild steel round bars 10mm dia as in tie bars fixed to fencing posts including cut to length, bent to shape, welding of bar at spots as directed and other similar works, conforming to Grade E-165 (Fe 290), complete all as specified & as directed. |
| 51 | Supply & fixing mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc 5 cm long and dia of neck 5 to 10 mm, complete all as specified & as directed. |
| 52 | Supply & fixing mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Grade E-165 (Fe 290), complete all as specified & as directed.. |
| 53 | Supply & fixing Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing and similar work conforming to Grade Fe-410 (Grade E-250) complete complete all as specified & as directed. |
| 54 | Supply & fixing galvanized 2 strand, steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provision of galvanized mild steel wire, staples or steel pins etc complete all as specified & as directed. Note :- Each line of horizontal / vertical / diagonal wire to be measured for the purpose of payment. |
| 55 | S&F Pre-painted galvalume aluminium zinc coating corrugated steel sheet 0.50mm thick with coating AZ-150 gsm of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling steel sheets (plain or corrugated, semi corrugated, etc.) sheets as in roof coverings etc including ridges complete all as specified and as directed. Note : Colour of sheet shall be as approved by the GE. |
| 56 | S&F Pre-painted galvalume aluminum zinc coating Plain steel sheet 0.50mm thick with coating AZ-150 gsm of any colour having tensile strength of 550 Mpa as in roof covering/ridge/fascia/cladding to wall, fixed with self tapping screws including dismantling steel sheets sheets as in roof coverings etc including ridges complete all as specified and as directed. Note : Colour of sheet shall be as approved by the GE. |
| 57 | M&L for false ceiling with 12mm thick mineral fibre board with & including anodized aluminium snap grid frame work of size 605mm x 605mm consisting of anodized aluminium main & cross Tee of size 36.50 x 25.00 x 1.40mm weighing 0.24 Kg/RM & 23.50 x 26.40 x 1.40 mm weighing 0.191 Kg/RM respectively, main & cross tee jointed at junction crossing with anodized aluminium angle bracket of size 15x15x1.5mm weighing 0.12 Kg/RM fixed with suitable MS bolts, nuts & washers, snap grid (main/cross tee) supported at ends all along the wall with anodized aluminium angle of size 35x25x2mm weighing 0.36 Kg/RM fixed to wall with suitable arrangement, fixed in grid support with 2.50mm dia galvanized mild steel wire Class 3 fixed in detached works etc to support snap grid, with & including providing two coats of synthetic enamel paint over a coat of pink primer including preparation to exposed surfaces, complete all as per manufacturer’s instructions, including dismantling wall and ceiling boards complete all as specified and as directed. Note : False ceiling board shall be of make Everest / Charminar or equivalent in makes mentioned in Appendix "B" here-in-after. |
| 58 | S&F for false ceiling with Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions including repair of frame work of ceiling including taking down old ceiling board complete all as specified and as directed. Note : Design & shade of sypsum board shall be as approved by the GE. |
| 59 | Taking down old false ceiling and replacement of frame work for false ceiling and re-fixing for false ceiling with Gypsum Board in ceiling fixed with screw as per manufacturers instructions after replacement of frame work complete all as specified and as directed. |
| 60 | M&L for 25mm thick PCC (1:2:4) type B0 using 12.5mm graded crushed stone aggregate as in flooring, leveling course, etc, surface finished fair and even, complete all as specified and as directed. |
| 61 | M&L for machine cut Kota stone slab flooring 18 to 20mm thick laid over & including screed bed or bedding layer of 15mm thick in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab with true & uniform joints including rubbing and mirror polishing complete all as specified & as directed. |
| 62 | M&L for machine cut Kota stone slab 18 to 20mm thick on vertical surfaces such as dado, skirting etc. laid over & including 10mm thick rendering (as screed bed) in cement & sand mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab with true & uniform joints including rubbing and mirror polishing complete all as specified & as directed. |
| 63 | M&L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed. |
| 64 | M&L for glazed ceramic tiles (coloured) 7mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm (i.e 450mm x 300mm or as directed), on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering (as screed bed) in cement & sand mortar 1:4 complete all as specified and as directed. |
| 65 | M&L for factory made 60mm thick machine pressed precast cement concrete coloured designer polished (reflecting type) interlocking paver blocks of Grade M-35 conforming to IS 15658-2006 of shape and size as directed with grey cement and no pigment with coloured top casted in an automatic plant working on vibration and simultaneous hydraulic compression from top, laid over & including 25mm thick sand cushioning, joints of blocks filled with dry sand and compacted with mechanical vibrator including demolition of PCC pavor block of any description complete all as specified & as directed. Note : Shape & colour of paver blocks shall be as approved by the GE. |
| 66 | M&L for 75mm thick PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as inplinth protection surface finishedeven and smooth without using extra cement complete all as specified. Note :- Plinth protection shall be of width as directed and shall belaid with an outward slope of 1:30 in alternative bays not exceeding 4 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3). |
| 67 | M&L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement, complete all as specified and directed. Note : Contractor shall have no claim on if plaster is carried out in patches irrespective of any height. |
| 68 | M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces of walls, mixed with integral liquid water proofing compound as per manufacturer’s instructions, finished even & smooth without using extra cement, complete all as specified and directed. Note : Contractor shall have no claim on if plaster is carried out in patches irrespective of any height. |
| 69 | M&L for rendering 5mm thick in cement and sand mortar 1:3 on concrete surfaces as on ceiling, finished even & smooth without using extra cement complete all as specified. Note : Contractor shall have no claim on if plaster is carried out in patches irrespective of any height. |
| 70 | M&L for preparation of newly plastered / unplastered surfaces of walls & applying three coats of white wash complete all as specified. |
| 71 | M&L for preparation of newly plastered / unplastered surfaces of ceilings & applying three coats of white wash complete all as specified. |
| 72 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over a coat of primer complete all as specified & as directed. |
| 73 | M&L for preparation of old/untreated surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/tint complete all as specified & as directed. |
| 74 | M&L for preparation of old surfaces by complete removal of existing treatment of walls including pillars etc by mechanical equipment like electric wall sander and applying two coats of oil emulsion distemper (OBD) using rollers over a coat of primer including two coats/layers of wall care putty complete all as specified & as directed. |
| 75 | M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint over a coat of alkali resistant priming paint complete all as specified & as directed. |
| 76 | M&L for preparation of old plastered surfaces and applyingtwo coats of cement base paint of approved shade/tint over a coat of alkali resistant priming paint on walls complete all as specified and as directed. |
| 77 | Hacking out old broken glass any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and as directed. |
| 78 | S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces, complete all as specified & as directed. |
| 79 | S&F 4.8mm thick sheet glass ordinary quality and glazing with oil putty/rubber gasket in square of any thickness in each pane for metal frames complete all as specified & as directed. |
| 80 | S&F 4mm thick figured glass pin head type and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces, complete all as specified & as directed. |
| 81 | S&F sheet glass self assembly consisting 5.5mm thick sheet glass self 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified & as directed. |
| 82 | M&L for preparation of old painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint all as specified & as directed. |
| 83 | M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified & as directed. |
| 84 | M&L for preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint all as specified & as directed. |
| 85 | M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamelpaint of approved tint over a coat of zinc chrome primer complete all as specified & as directed. |
| 86 | Dismantling carefully and taking up or down existing unserviceable/serviceable steel water tubing and connections of 15mm bore complete all as specified and as directed. |
| 87 | M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings, fixed to walls and ceilings or laid in floors, complete all as specified and as directed. |
| 88 | Fixing/Laying only, jointing and testing old serviceable galvanized steel water tubing medium grade of 15mm bore obtained serviceable vide serial item No. 86.00 here-in-before including cleaning the pipe from inside & outside properly including rust & mud removal, with & including new fittings and fixed to walls and ceilings or laid in floors in new or old position complete all as specified and as directed. Note : The quoted rate shall deemed to include new GI fittings (ISI marked). Old fittings shall not be used. |
| 89 | Dismantling carefully and taking up or down existing unserviceable/serviceable steel water tubing and connections of 20mm bore complete all as specified and as directed. |
| 90 | M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings, fixed to walls and ceilings or laid in floors, complete all as specified and as directed. |
| 91 | Fixing/Laying only, jointing and testing old serviceable galvanized steel water tubing medium grade of 20mm bore obtained serviceable vide serial item No. 89.00 here-in-before including cleaning the pipe from inside & outside properly including rust & mud removal, with & including new fittings and fixed to walls and ceilings or laid in floors in new or old position complete all as specified and as directed. Note : The quoted rate shall deemed to include new GI fittings (ISI marked). Old fittings shall not be used. |
| 92 | Disconnecting & taking down the existing unserviceable water tank and Supply and fixing 500 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I and as directed. Note : (i) The water storage tanks shall be 2 layers with ISI marked, HDPE tanks moulded to seem-less perfection of rotational process. The tanks shall be manufactured only from FDA approved special grade of polyethylene and shall be certified fit for potable water. (ii) The tanks shall white coloured and ISI marked. Also refer paras 18.6 and 18.6A of MES Schedule Part-I. (iii) Payment for inlet, outlet and over flow pipes and ball valve shall be made separately. Howerver cost of providing necessary GI fittings such as nipples with check nuts for inlet and outlet pipes, GI plug with check nut for over flow pipe and 30cm long wash out pipe, GI 20mm nominal bore, medium grade and check nut for wash out pipes of size as per actual requirements as directed by Engineer-in-Charge shall be deemed to be included in the unit rates of this item. |
| 93 | Disconnecting existing serviceable rotational moulded polyethylene water storage tank, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and refixing in position of capacity upto 1000 litres including cleaning & removing all scale & dirt etc from tank with gunny bags, cleaning with fresh water and bleaching powder, complete all as specified and as directed. |
| 94 | S&F in repairs Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20mm bore (minimum weight 210 gms) complete all as specified and as directed. |
| 95 | S&F in repairs vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, ‘P’ or ‘S’ trap, including connection to trap and flushing pipe, antisyphonage pipe etc, complete all as specified and as directed. |
| 96 | S&F in repairs vitreous china wash down water closet pan (Pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc., with plastic WC seat cover (white) closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device, Jet spray (brass chromium plated of butterfly shape) with 1.00m PTMT tube suitable for 15 mm bore GI pipe with PTMT nut & nipple, complete all as specified & as directed. |
| 97 | S&F in repair plastic water closet seat cover, white, closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified & as directed. |
| 98 | S&F in repairs PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including32 mm dia PVC flush pipeconnected to water closet with inlet, ball valve, float and handle complete all as specified & as directed. |
| 99 | S&F in repairs vitreous china wash hand basin, white, flat back of size 580mm x 440mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed including traps, (excluding, waste chain & plug), complete all as specified & as directed. |
| 100 | S&F in repairs vitreous china urinal, half stall type, white including providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with & including 60 mm long brass screws, pointing around urinal back in cement, with & including PTMT spreader, PTMT grating and union for discharge pipe including waste pipe of polythelene of low or high density or PVC 32mm dia, complete all as specified and as directed. |
| 101 | S&F in repairs PVC connection 450 mm long suitable for 15 mm bore GI pipe including PTMT nuts on both sides complete all as specified & as directed. |
| 102 | S&F in repairs 15mm bore pillar tap, cast copper alloy with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered‘Hot’ or ‘Cold’ with long screwed shanks & fly nuts, screwed for iron pipes, complete all as specified & as directed. |
| 103 | S&F in repairs 15 mm bore bib tap, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified & as directed. |
| 104 | S&F in repair 15 mm bore bib tap, cast copper alloy, chromium plated, long body, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified & as directed. |
| 105 | S&F in repairs 15mm bore stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified & as directed. |
| 106 | S&F in repairs 20mm bore stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified & as directed. |
| 107 | S&F in repairs 20mm bore Gun metal gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, complete all as specified & directed. |
| 108 | S&F in repairs 600mm x 450mm looking mirror of selected quality glass not less than 5.5mm thick, mounted on 6mm thick AC building board or commercial plywood including aluminium framing and fixed to PVC rawl plugs with chromium plated brass screws and cup washers complete all as specified. |
| 109 | S&F in repair brass chromium plated shower rose 125mm size with shower arm including fixing to steel pipe of 15mm bore or union complete all as specified and as directed. |
| 110 | S&F in repairs brass chromium plated Health Faucet with 8mm dia & 1.20m long stainless steel braided flexible tube and wall hook suitable for fixing to supply pipe of 15mm bore complete all as specified and as directed. |
| 111 | S&F in replacement of tubular towel rail, brass chromium plated, 20mm dia, ‘D’ type, 60cm long between flanges, fixed to PVC rawl plugs with chromium plated brass screws, complete all as specified and as directed. |
| 112 | S&F in repairs soap dish holder brass chromium plated fixed on wall with PVC rawl plug & cadmium plated brass screws complete all as specified & as directed. Make :- Cat Part No BA-45 of make – Prayag or equivalent in makes mentioned in Appendix "B" here-in-after. |
| 113 | S&F in replacement of 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints / solvent cement joints fixed to walls complete all as specified & as directed. |
| 114 | S&F in replacement of 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints / solvent cement joints fixed to walls complete all as specified & as directed. |
| 115 | S&F 110mm bore PVC (SWR) bend any redius, disminishing pieces or trappers joint with solvent cement complete all as specified & as directed. |
| 116 | S&F 75mm bore PVC (SWR) bend any redius, disminishing pieces or trappers joint with solvent cement complete all as specified & as directed. |
| 117 | S&F 110mm bore PVC (SWR) branch pieces, double (equal or unequal) ordinary or inverted (spigot or socket type) or with parellel branches complete all as specified & as directed. |
| 118 | S&F PVC (SWR) coupler 110mm bore complete all as specified & as directed. |
| 119 | S&F PVC (SWR) coupler 75mm bore complete all as specified & as directed. |
| 120 | S&F 75mm bore PVC (SWR) vent cowl complete all as specified & as directed. |
| 121 | S&F PVC (SWR) "P’ trap 110mm bore complete all as specified & as directed. |
| 122 | S&F 110mm PVC (SWR) reducers complete all as specified & as directed. |
| 123 | S&F in replacement of PVC (SWR) floor trap plain with PTMT grating including jointing with solvent cement,diameter of outlet 75mm, complete all as specified & as directed. |
| 124 | S&F in repairs 32mm dia waste coupling CP for Wash hand basin complete all as specified and as directed. |
| 125 | S&F in repairs 40mm dia waste coupling CP for kitchen sink complete all as specified and as directed. |
| 126 | S&F in repairs 32mm dia PVC flexible waste pipe 75cm long with 32mm dia socket for union, for wash hand basin and urinals complete all as specified and as directed. |
| 127 | S&F in repairs Grating 75mm dia of stainless steel with and without hole having minimum wieght 75gm complete all as specified and as directed. |
| 128 | S&F in repairs PVC Grating 125mm dia of PTMT (Minimum weight 25gms) complete all as specified and as directed. |
| 129 | M&L running welding in repairs with thickness of metal exc 6mm including provision for stopper of peg stay steel handle fitting complete all as specified and directed. |
| 130 | M&L welding in repairs not exc 2.5cm in length and not exc 6mm thick of metal complete all as specified and as directed. |
| 131 | S&F in repairs floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor with overall length of cover plate 140mm complete all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
