Military Engineer Services-MES has published Tender For Repair / Maint To Lt External Electrification And Repair/ Maint Of Security/ Perimeter High Mast Lights/ Solar Lights/ Garden Lights And Connected Items At Rayang Mil Stn Under Ge 872 Ews. Submission Date for this Tender is 18-05-2024. Electrification Work Tenders in East Siang Arunachal Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 08-May-2024 | AMNDT 01 | Other | 18-05-2024 |
| FileName | File Description | File Size |
| e09451f7-c55e-48ab-8bcc-f4f3d2b4f709.html | Tender Notice | 0 KB |
| BOQ_729222.xls | Tender Document | 0 KB |
| Tender8585.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Dismantling of unserviceable broken LT steel pole/Strut any size including demolition of foundation as required and making good disturbed surface complete all as directed. (Note : Earth work wherever invloved shall be measured and paid separately) |
| 2 | Dismantling cross-arms of M.S. channel or angle sections etc. complete and setting aside serviceable materials for re-use with in 50m and removing unserviceable materials from site of work complete all as directed by the Engr-in-Charge |
| 3 | Dismantling existing unserviceable GI earth wire, cradles of any type from service feeder or distributor span complete all as specified and directed. |
| 4 | Dismantling/taking down old aluminium steel reinforced (ACSR) conductor of any size from LT overhead line including all jumper etc and keeping serviceable materials in safe custody for reuse in the work complete all as specified and directed. |
| 5 | Dismantling LT Stay assembly, of any size and unserviceable materials removing from the Site(s), complete all as specified and directed. (Note: (a) Unserviceable Stay assembly shall be taken off/dismantled at Ground Level and making good disturbed ground surface. (b)Earthwork for demolition of cement concrete shall be measured and paid separately under relevant Items of this Schedule.) |
| 6 | Disconnecting and Taking down/out unserviceable UG cables of any type and any sizes including brick cusioning etc as cable protection from trenches, floors, walls, GI pipe etc andsegregating serviceable cables for re-use at site and removing unserviceable cables from the site of work complete all as specified and directed. (Note: Excavation and earth work shall be measured and paid seperately) |
| 7 | Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depthfor foundation, trenches for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 8 | Excavating in trenches not exc. 1.5 metre wide and exc. 1.5 metre & not exc. 3 metre depth (beyond the first 1.5 metre) for foundation of poles etc and getting out in soft/loose soil complete all as specified and directed |
| 9 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft/loose soil complete all as specified and directed. |
| 10 | Removing excavated material not exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting pointcomplete all as specified and directed. |
| 11 | M & L for Plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, etc complete all as specified and directed. |
| 12 | M & L for Plain cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, etc complete all as specified and directed. |
| 13 | M & L for plain cement concrete (1:2:4), type B1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary formwork complete all as specified and as directed. |
| 14 | M & L for Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9.0 metres long) including providing one coat of aluminium paint over coat of red oxide zinc crome primer and providing 03 Nos of band/ strap with paint black/ yellow colour, 300mm apart from plinth block and numbering of pole and one coat of black bitumenous paint over a coat of red oxide zinc chrome primer to embedded portion of pole complete all as specified and directed. (Note : Excavation and Earth work shall be measured and paid separately) |
| 15 | M & L for Cross arms bracing supports clamps and back plates fabricated from structural steel sections including nut bolt washers welding bending cold or hot drilling holes for bolts in any shape or size as indicated or directed and including one primer coat of red oxide zinc chrome primer, one under coat and one finishing coat of aluminium paint complete all as specified and directed. |
| 16 | Dismantling of insulators of any type from LT poles of any size and type and setting aside complete all as specified and directed. |
| 17 | M & L for pin type porcelain vitreous white/brown insulator including one galvanised mild steel spindle two galvanised iron nut 100 mm height 65 mm dia suitable for 1100 volts grade complete all as specified and directed. |
| 18 | M & L for shackle type porcelain, insulator vitreous, white, brown or green, including galvanised mild steel, straps, washers, insulator bolts, washers and nuts, 75 mm height and 90 mm dia, size of strap 31 mm x 3 mm and dia of bolt 12 mm suitable for 1100 volts complete all as specified and directed. |
| 19 | M & L for galvanised steel continuous earth wire 3.15mm or 4 mm dia suitable for LTover head line complete all as specified and directed. |
| 20 | M & L for galvanised steel earth wire 4 mm dia (hexagonal/rectangular) used for craddle guarding suitable for LT over head line complete all as specified and directed. |
| 21 | S & F aluminium conductor steel reinforced (ACSR) conductorincluding binding, straining in LT over head line including all jumper connection and binding on insulator with new wire complete all as specified and directed. |
| 22 | Re-straining and tightening of existing serviceable ACSR conductor of any size without taking down including all arangement and including bindingwire 2 mm dia and colour sleeve Jumpers complete all as specified and directed. |
| 23 | M & L for Stay assembly complete with all accessories as shown in electrical plate No 1 of MES Schedule Part I dia of stay rod 16mm with and including 7 / 3.15 mm galvanised stay strand complete including taking down/dismantling existing one all as specified and directed. (Note : Loop insulator, excavation & earthwork and cement concrete measured and paid separately under relevant items of this Schedule.) |
| 24 | M & L for loop type insulator, vitreous porcelain, white, brown or green of overall dimension 65 x 90 mm, clearance of hole 25.5 mm etc complete all as specified and directed. |
| 25 | M & L for Preparation of old painted surface above the planting depth/PCC coping of steel tubular LT pole upto 11.00 metre long including MS clamps, cable protection pipe, bracket fitted with steet light fittings etc by scraping with steel wire brush and applying one coat of aluminium paint to external surface of poles, MS cross arms, MS clamp, cable protection pipe etc to give even shade including 5 Nos strips painting of 300mm high each around the pole with two different colour (black/yellow) of synthetic enamel paint and numbering of poles complete all as specified and as directed by the Engr-in-Charge. |
| 26 | Trimming of tree branches around the overhead conductor, poles & stays (not less than 3 metre) to clear the approach of overhead lines including removing of nest, wild grass creepers, unwanted vegetation, etc from pole/stay including cleaning of creepers climbed on poles and angles, channels and disposed off from site beyond 50m and upto a total distance of 250m complete all as specified and directed by the Engr-in-Charge. |
| 27 | S & F in repair fire extinguisher, ABC type of capacity 5 Kg, ISI marked complete, all as specified & directed. |
| 28 | S & F in repair LED 100 Watt flood light luminaire, Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP66 flood light, suitable for highlighting architectural facade and general purpose lighting. with lamp and all accessories including mounting clamps, bolts, nuts and washers and copper conductor cable of suitable size to fittings of suitable length fixed as in High mast light at any height complete all as specified and as directed. (Make: Havell"s Cat No. JETAIRISFL100WLED757ARWBLTGor equivelant of make as per list of manufacturer) |
| 29 | S & F in repair LED 200 Watt flood light luminaire, Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP66 flood light, suitable for highlighting architectural facade and general purpose lighting. with lamp and all accessories including mounting clamps, bolts, nuts and washers and copper conductor cable of suitable size to fittings of suitable length fixed as in High mast light at any height complete all as specified and as directed. (Make: Havell"s Cat No. JETAIRISALPHAFL200WLED857PBOLTGor equivelant of make as per list of manufacturer) |
| 30 | S & F in repairs IP 66 junction box made of impact resistance polycarbonate & heat resistant materials of size 200x160x98mm mm, dust proof, water tight, light weight, acid resistant, corrotion proof insulated and shock proof, fire retardant, self extinguishing, helogen & silica free non toxic material, UV resistant with internally embedded gasket and fitted with required terminals alongwith type test certificate and veryfied by glow-wire test in accordance with IEC60695-2-11 complete all as specified and directed directed. (Make : HENSEL, Cat No : FK9255 or equivalent model of make as per list of manufacturer) |
| 31 | Supply and laying cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 Sqmm 3.5 core, fixing along the poles or passing through pipes or laid under floor of through walls etc jointing and testing complete all as specified and directed. (Note: Excvation and earth work shall be measured and paid seperately) |
| 32 | Supply and laying cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 Sqmm 2 core, fixing along the poles or passing through pipes or laid under floor of through walls etc jointing and testing complete all as specified and directed. (Note: Excvation and earth work shall be measured and paid seperately) |
| 33 | Supply and laying cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 Sqmm 4 core, fixing along the poles or passing through pipes or laid under floor of through walls etc jointing and testing complete all as specified and directed. (Note: Excavation and earth work will be measured and paid seperately) |
| 34 | Supply and laying cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 70 Sqmm 3.5 core, fixing along the poles or passing through pipes or laid under floor of through walls etc jointing and testing complete all as specified and directed. (Note: Excavation and earth work will be measured and paid seperately) |
| 35 | Supply and laying cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 400 Sqmm 3.5 core, fixing along the poles or passing through pipes or laid under floor of through walls etc jointing and testing complete all as specified and directed. (Note: Excavation and earth work will be measured and paid seperately) |
| 36 | M & L for Sand cushioning with clean dry sand in trenches for protection of under ground cables (below, above and around the cable laid in trenches) complete all as specified and directed. (Note: Thickness after punning down shall be measured for payment) |
| 37 | Supplying and laying un-reinforced precast concrete cable cover, class LV, type 2 flat, size 300mm x 180mm x 40mm conforming to IS-5820-1970 complete all as specified and directed. |
| 38 | S & F in repair 50 mm bore, steel tubes, galvanised, light grade with all fittings, laid in floor/road crossing/drain etc as in cable protection complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 39 | S & F in repairMCCB 415 Volt,25 KA,3 Pole,100 Amps Capacity complete all as specified and as directed. (Make: Legrand Cat Part No. 4200 45or equivelant of make as per List of Manufacturer"s) |
| 40 | S & F in repairs MCCB 415 Volt 25 KA, 4 Pole,200 Amps Capacity complete all as specified and as directed . (Make: Legrand Cat Part No. 4202 18 or equivelant of make as per List of Manufacturer"s) |
| 41 | S & Fin repairsMCCB 415 Volt, 25 KA, 4 Pole, 250 Amps Capacity complete all as specified and as directed. (Make: Legrand Cat Part No. 4202 19or equivelant of make as per List of Manufacturer"s) |
| 42 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 16 Sqmm 4 Core nominal cross section in service connectionsincluding taking out old one complete all as specified and directed. |
| 43 | S & Fin repairsAir Circuit Breaker (ACB, 415 Volt, 50 kA, 4 Pole, 630 Amps Capacity, Thermal magnetic release (drawout type) complete all as specified and as directed. (Make: L & T Cat Part No. SL95351or equivelant of make as per List of Manufacturer"s) |
| 44 | M & L Earthing complete with GI earth plate electrode 600 mm x 600mm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 m below ground level with the top edge of earth plate at depth not less than 1.5 m below ground level connected with galvanised earth strip of size 32x6mm by means of bolts, nuts,check nuts and washers protected by 40mm bore light grade GI pipe, funnel with 20mm bore GI medium grade pipe for watering, wire mesh, including concrete pit in PCC (1:3:6) type C-1, with 40 mm thick Pre-cast R.C.C. (1:2:4) type B-I cover slab (reinforced with 8 mm dia deformed bar @ 10 cm C/C both ways and suitable handle of 12 mm dia round bar),including providing charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel, wire mesh, aluminium lugs, complete in all respect and other end connected with main switch board or Earthing test point as directed,including necessary earth work and disposal of spoil to a distance not exceeding 50 metre and necessarytesting on completion inclduing taking down old one complete all as specified and as directed by the Engineer-in-Charge. |
| 45 | M & L for taking down Street/ Perimeter light fittings of any descriptions from any height after disconnecting electric connections and opening cover and checking of light fittings for serviceability and repaired as required and re-fixing the light fittings in existing position after repair and providing connections including replacement of defective/ unserviceable spares/ parts etc as required to make the fittings in smooth serviceable condition and testing complete all as specified and as directed. (Note: (i) Replacement of unserviceable parts shall be measured and paid seperately as "supply only" (ii) Replacement of minor spares/ parts such as nuts, bolts & washer, worn out cables as per existing size etc shall deemed to be included in the unit quoted rate) |
| 46 | Supply only Driver (as approved) suitable forLED street/ security light fittings of 30/35 Watt complete all as specified and directed. |
| 47 | Supply only Driver (as approved) suitable forLED street/ security light fittings of 40/45 Watt complete all as specified and directed. |
| 48 | M & L for taking down High mast light fittings of any descriptions from any height after disconnecting electric connections and repair the same by applying greasing, oiling etc as required and re-hoisting light fittings after reqpair including replacement of defective/ unserviceable spares/ parts etc as required to make the fittings in smooth serviceable condition and testing complete all as specified and as directed. (Note: (i) Replacement of unserviceable parts shall be measured and paid seperately as "supply only" (ii) Replacement of minor spares/ parts such as nuts, bolts & washer, worn out cables as per existing size etc shall deemed to be included in the unit quoted rate) |
| 49 | Supply only Driver (as approved) suitable forLED Flood light fittings of 120 Watt complete all as specified and directed. |
| 50 | S & F in repair LED 120 Watt flood light luminaire, Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium, IP66, suitable for highlighting architectural facade and general purpose lighting with lamp and all accessories including mounting clamps, bolts, nuts and washers and copper conductor cable of suitable size to fittings of suitable length fixed as in High mast light at any height complete all as specified and as directed. (Make: Havell"s Cat No. JETAIRISFL120WLED757APWBLTG or equivelant of make as per list of manufacturer) |
| 51 | M & L for taking down Solar light fittings of any descriptions from any height after disconnecting electric connections and repair the same by replacing of defective/ unserviceable spares/ parts etc as required and applying Jelly to the battery terminals, tightening of all connections, cleaning of solar panel thoroughly, filling distilled water to solar light battery to make the fittings in smooth serviceable condition and re-fixing the solar light fittings in its original position and testing complete all as specified and as directed. (Note: (i) Replacement of unserviceable parts, distilled water etc shall be measured and paid seperately as "supply only" (ii) Replacement of minor spares/ parts such as nuts, bolts & washer, worn out cables as per existing size etc shall deemed to be included in the unit quoted rate) |
| 52 | Supply only Tinned copper battery terminal (as approved) complete all as specified and directed. |
| 53 | Supply only Solar light Battery, 12 Volts, 75 AH, Dry Gel (as approved) suitable for 3 days backup capacity complete all as specified and directed. |
| 54 | Supply only Distilled water suitable for Solar light batteries complete all as specified and directed. |
| 55 | S & F in repairs 35 Watt LED Street light fittings, New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08 including lamp and connections complete all as specified and as directed. (Make: Havell"s Cat No. ENDURASUNDOWNSL35WLED765PASYBOPC or equivelant of make as per list of manufacturer) |
| 56 | S & F in repairs 60 Watt LED Street light fittings, New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and Toughened glass having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK07 including lamp and connections complete all as specified and as directed. (Make: Havell"s Cat No. ENDURASUNDOWNSL60WLED765PASYBOTG or equivelant of make as per list of manufacturer). |
| 57 | S & F in repairs 70 Watt LED Street light fittings, New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and Toughened glass having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK07 including lamp and connections complete all as specified and as directed. (Make: Havell"s Cat No. ENDURASUNDOWNSL70WLED765PASYBOTG or equivelant of make as per list of manufacturer) |
| 58 | S & F in repairs 90 Watt LED Street light fittings, New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and Toughened glass having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK07 including lamp and connections complete all as specified and as directed. (Make: Havell"s Cat No. ENDURASUNDOWNSL90 WLED765PASYBOTG or equivelant of make as per list of manufacturer). |
| 59 | S & F in repairs 100 Watt LED Street light fittings, New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LEDs as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 including lamp and connections complete all as specified and as directed. (Make: Havell"s Cat No. ENDURAOMNIPLUSSL100WLED757SASYTOPC or equivelant of make as per list of manufacturer) |
| 60 | S & F in repair LED 70 Watt flood light luminaire, Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP66 flood light, suitable for highlighting architectural facade and general purpose lighting with lamp and all accessories including mounting clamps, bolts, nuts and washers and copper conductor cable of suitable size to fittings of suitable length fixed as in High mast light at any height complete all as specified and as directed. (Make: Havell"s Cat No. JETAALBAFLOODLIGHT70Wor equivelant of make as per list of manufacturer) |
| 61 | S & F in repair LED 160 Watt flood light luminaire, Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP66 flood light, suitable for highlighting architectural facade and general purpose lighting with lamp and all accessories including mounting clamps, bolts, nuts and washers and copper conductor cable of suitable size to fittings of suitable length fixed as in High mast light at any height complete all as specified and as directed. (Make: Havell"s Cat No. JETAIRISFLS160WLED757P2AWBLTGor equivelant of make as per list of manufacturer) |
| 62 | S & F in repair Street light bracket arm of length not less than 1.2 m made out of GI tubing, 40 mm bore, light grade fixed to pole, etc with suitable size flat iron clamp 40x5mm of suitable length, nuts, bolts & washers including painting with two coats of aluminium paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 63 | S & F in repairs shock proof, rust proof, fire reterdant, non transperant Kiosk Pole box of size 310x210x120mm made of Negineering Plastic on piece moulded for outdoor type, heavy duty, IP-66 protection, with 4 Nos insulated aluminium bus bar of 60 Amps capacity, mounted on unbreakable insulators, MCB SP 10 Amps complete aluminium lugs of suitable size upto 50 Sqmm including 2 Nos of flat iron 40x3mm clamps with suitable MS nuts, bolts & washers etc and duly powder coated on both sides complete all as specified and directed directed. (Make : HENSEL or equivalent model of make as per list of manufacturer) |
| 64 | S & F in repair Street light Digital timer, comprising of incoming cable terminals, MCBs, timer, contactor, outgoing terminal duly prewired and all accessories, housed in Mild steel box, outdoor type of capacity 40 Amps, TPN, 3 Pole, 230 Volts having contactor rating 32Amps, TP and providing necessary connection and testingcomplete all as specified and directed. |
| 65 | S & F in repairs 08 Watt, LED Bollard light fittings, New generation, energy saving, environmental friendly, long life aesthetically designed aluminium landscape IP 65 luminaire for diffused lighting with high power LED as light source. including lamp and making good disturbed surfaces complete all as specifiedand directed. (Make: Havell"s Cat No. BAMBOOBL8WLED830SSYMTOPCM or equivelant of make as per list of manufacturer) |
| 66 | S & F in repair 25 Watt, 230 Volts AC Post Top Lantern, outdoor type with decorative post top for 360 Degree indirect light, IP 65 protection with impact and corrosion reisitant comp[lete with driver and lamp, fixing accessories and connecting up with suitable copper conductor complete all as specifiedand directed. (Make: Havell"s Cat No. CORALPT25WLED830SSYMTOPC or equivelant of make as per list of manufacturer) |
| 67 | S & F in repair 40 Watt, 230 Volts AC Post Top Lantern, New generation, IP 65 LED post-top family, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source. Clear Cover offers bright illumination for different applications with driver and lamp, fixing accessories and connecting up with suitable copper conductor complete all as specifiedand directed. (Make: Havell"s Cat No. RUBYPT40WLED757PSYMTOPC or equivelant of make as per list of manufacturer) |
| 68 | S & F in repair PVC insulated and FRLS PVC Round Sheathed, multi-stranded Copper Conductor (flexible) industrial cable, 1100 Volt, conforming to IS 694 of size 1.0 Sqmm 3 core nominal cross sectional areacomplete all as specified and directed. |
| 69 | M & L for boring of horizontally holes by manual method under road and dia of hole not exc 100mm without damaging the exsting road, getting out and disposal of excavated soil, etc to a distance not exc. 50 meter from the site of work complete all as directed by Engineer in charge. |
| 70 | M & L for shackle type porcelain, insulator vitreous, white, brown or green, including galvanised mild steel, straps, washers, insulator bolts, washers and nuts, 100 mm height and 115 mm dia, size of strap 31 mm x 5 mm and dia of bolt 14 mm suitable for 1100 volts complete all as specified and directed. |
| 71 | S & F in repair PVC/fibre separator for LT over head line 1100 volts conductor 3/4 wire system for horizontal two Nos, in span including taking down old separator complete all as specified and as directed . |
| 72 | S & Fin repairsMCCB 415 Volt,25 KA,4 Pole,40 Amps Capacity complete all as specified and as directed. (Make: /Indo Asian. Cat Part No. 4200 52or equivelant of make as per List of Manufacturer"s) |
| 73 | S & F in repair MCCB 415 Volt, 25 KA, 4 Pole, 160 Amps Capacity complete all as specified and as directed. (Make: Legrand Cat Part No. 4200 57or equivelant of make as per List of Manufacturer"s) |
| 74 | Supply and laying cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 Sqmm 4 core, fixing along the poles or passing through pipes or laid under floor of through walls etc jointing and testing complete all as specified and directed. (Note: Excvation and earth work shall be measured and paid seperately) |
| 75 | Supply and laying cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 120 Sqmm 3.5 core, fixing along the poles or passing through pipes or laid under floor of through walls etc jointing and testing complete all as specified and directed. (Note: Excavation and earth work will be measured and paid seperately) |
| 76 | S & F in repair 40 mm bore, steel tubes, galvanised, light grade with all fittings, laid in floor/road crossing/drain etc as in cable protection complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 77 | S & F in repair 80 mm bore, steel tubes, galvanised, light grade with all fittings, laid in floor/road crossing/drain etc as in cable protection complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 78 | Supply, Install, Commissioning and testing LT cubical type Oanel board, CPRI approved factory made, outdoor type, made out of 16 SWG thick CRCA sheet, Powder coated, Dust and vermin proof, weather proof with front operared double door type with seperate hinge door for each compartment with locking arragnement, totally enclosed, grouted in PCC1:2:4, Type B-1 foundation of suitable size complete including taking down/dismantling existing panel board all as specified and directed comprising with the following items: (i) Copper bus bar 4 strip, 450mm long, 100 Amps, 415 Volts- 01 Set (ii) MCB, TP, 32 Amps, 10 kA, 230 Volts:- 03 Nos (iii) MCB, TP, 63Amp, 16 KA, 415 Volts:- 01 No (iv) Digital multifunction meter - 01 No. (v) LED pahse indicator lamp -03 Nos. (Note: (i) Panel shall be of factory made and CPRI approved (ii) External terminals with tinned copper has to be provided for trmming the incoming and outgoing cables with suitable lugs of MCB (if required) (iii) Necessary excavation and earth work for foundation shall deemed to be included in the unit quoted rate) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
