Military Engineer Services-MES has published Tender For Provn Of Tiling Aluminium Windows And Certain Connected Br Work False Ceiling And Wet Cloth Hanger In Qtr P 1 Oblique 1 P 1 Oblique 2 Jcos And Bldg No P 2 And P 3 Ors Govt Md Accn Of Zone Ii Under Ge S Tezpur. Submission Date for this Tender is 20-05-2024. Tile Flooring Tenders in tezpur Assam. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| 5d33ec61-6928-4d48-b88e-aa23882bae8a.html | Tender Notice | 0 KB |
| Addldocus.pdf | Tender Document | 0 KB |
| BOQ_729194.xls | Tender Document | 0 KB |
| Tenderdocuments8865.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Demolition of Cement Concrete (un-reinforced) in Ground Floors and Pavings not exc. 150mm thickness (above or below Ground Level), complete all as specified and as directed. |
| 2 | Dismantling Reinforced Cement Concrete of any description and in any Position not otherwise specifically provided for, complete all as specified and as directed. |
| 3 | Taking down existing Water Proofing Treatment with and including roof tiles and padding upto original roof and removing debris from the Site, complete all as specified and as directed. |
| 4 | Demolition of Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions, complete all as specified and as directed. |
| 5 | Dismantling of Wall and Ceiling Board (Fibre, Pulp, Insulation etc.) or Insulation Board/Slab /Blankets, any thickness including Cover Fillets, complete all as specified and as directed. |
| 6 | Taking down Chowkat or Frame with shutters (without taking off Shutter from the Frame) n exc. 1.50 Sqmcomplete all as specified and as directed. |
| 7 | Taking down Chowkat or Frame with shutters (without taking off Shutter from the Frame) exc. 1.50 Sqm but not exc. 4.00 Sqm Each, complete all as specified and as directed. |
| 8 | Dismantling AC Corrugated Sheets as in Roofing including Ridge or Similar Pattern Roof Coverings, complete all as specified and as directed. |
| 9 | Dismantling Wrought Iron or Mild Steel Work, viz. MS Flat Iron (Wind Tie) and Similar Work including MS Bolts, Nuts, etc., complete all as specified and as directed. |
| 10 | Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), and removing rubbish off the Premises, complete all as specified and as directed. |
| 11 | Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including racking out joints, hacking for key, scrubbing down with Water, remove dust, debries/ rubbish, etc., complete all as specified and as directed. |
| 12 | Taking down unserviceable PVC (SWR) Pipes & Fittings of any size or pattern and in any Position (Measured overall as fixed along the Centre Line over the Fittings and Accessories), complete all as specified and as directed. |
| 13 | Demolition and breaking up 150mm bore drain pipes (salt glazed ware, AC or reinforced concrete ) set in cement mortarincluding pcc haunching complete all as specified and as direceted. |
| 14 | Excavation in trenches not exc. 1.5 Metre wide and not exc. 1.50 Metre in depth for foundation etc. or for shafts, wells, cess pits, manholes, pier holes etc. not exc. 10 Sqm on plan and not exc. 1.50 Metre in depth and getting out as in Soft/Loose Soil, complete all as specified and as directed. |
| 15 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth round, in layers not exceeding 25 cm in soft/loose soilcomplete all as specified and as directed. |
| 16 | Returning, Filling in, including Spreading, Levelling, Watering and Well Ramming in Layers not exc. 25 Cm as in Soft/Loose Soil, complete all as specified and as directed. |
| 17 | Removing excavated Material (Soil) not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the starting point, complete all as specified and as directed. |
| 18 | M&L Hardcore of gauge not exc. 63 mm, broken brick aggregate deposited, spread and levelled in layers n exc. 15 Cm thick, watered and rammed to a True Surface, complete all as specified and as directed. |
| 19 | M&L Plain Cement Concrete type C2 (1:3:6) using 40 mm graded aggregate) in Foundation, Filling and Mass Concrete, complete all as specified and as directed. |
| 20 | M&L Cement Concrete 1:3:6 (40 mm graded crushed stone aggregate) as in Holdfast Block/ coping etc including necessary form-work, etc., complete all as specified and as directed. |
| 21 | M&L RCC (Nominal Mix) 1:2:4 type B-1 (Using 20mm graded stone aggreagate) as in slab, shelves supported on walls beam & coloumns in floor roof including balconies, canopies, deck slabs & shelves complete all as specified and directed. NOTE : Formwork and Reinforcement shall be Measured and Paid for separately under relevant Items. |
| 22 | M&L Pre-cast Reinforced Cement Concrete type B1(1:2:4) using 20 mm graded crushed stone aggregate) as in Cover Slab of Man Holes, Septic Tanks, etc., set in Cement Mortar 1:4 including necessary forms, moulds, etc., complete all as specified and as directed. NOTE : Reinforcement shall be measured and paid separately under relevant Item. |
| 23 | M&L Brick Work with Sub-Class ‘B’ Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed. |
| 24 | M&L Brick Work with Sub-Class ‘B’ Bricks Half-Brick thick, Old Size, built in Cement Mortar 1:4, Straight or Curved on Plan to any Radius, complete all as specified and as directed. |
| 25 | Cutting chases,pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of ladings, steps, cills,sushades,shelves,lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting grith n.exc.10cm girth on brick walls complete all as specified and as directed. |
| 26 | M&L Formwork toSoffits of suspend slab such as Roof slab, Floor slab, landings and similar works horizontal or sloping etc., not exceding 200mm thick ,flat rough finished surfaces of concrete, complete all as specified and as directed. |
| 27 | S&F Composite 100% solid wood plastic (single extented process) material (plastic wood) with density not less than 780kg/cum as in frames and chowkatsas per manufactuer instruction complete all as specified and as directed. |
| 28 | S&F Flush Shutters 35 mm thick, Solid Core Construction with Particle Board Core and Plywood Face Panels, Commercial type on Both Sides, complete all as specified and as directed. |
| 29 | M&L Second Class Hardwood Glazed and Skelton Shutter 35 mm thick, open rebated and prepared to receive Glass, Gauze, etc. (with Sash Bars) edges of framing plain, chamfered or rounded, mitred beads for screwing Glass etc., sizes of Members of Shutters as specified in MES Schedule Part I, Section 8, Clause 8.20(a), complete all as specified and as directed. |
| 30 | S&F Factory Made Solid PVC Door Frame of size 50 x 47 mm made out of 5.0 mm thick plain colour PVC Sheet reinforced with Mild Steel Square Tube, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed. |
| 31 | S&F Factory Made Solid Panel PVC Door Shutter 30mm thick, consisting of frame made out of Mild Steel Tube of 19 Gauge thickness and size of 19mm x 19mm for Stiles and 15mm x 15mm for Top & Bottom Rails. Mild Steel Frame shall have a coat of Steel Primer of Approved Make and Manufacturer. Mild Steel Frame shall be covered with 5.0mm thick heat moulded PVC "C" Channel of size 30 x 50mm forming Stiles and 5.0mm thick, 75mm wide PVC Sheets For Top Rail, Lock Rail & Bottom Rail on either side, and 10mm (5.0mm x 2) thick, 20mm wide Cross PVC Sheet as gap insert for Top Rail, Lock Rail & Bottom Rail. Panelling of 5.0mm thick PVC Sheet Beading on either side and joined together with Solvent Cement Adhesive, etc. An additional 5.0mm thick PVC Strip of 20mm width is to be stuck on the interior side of the "C" Channel using PVC Solvent Adhesive, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed. |
| 32 | M&L TMT Bars 10 mm dia and over, cut to length, bent to shape required including crank-ing, bending and bindingwith and including Mild Steel Wire (annealed) not less than 0.90 mm, complete all as specified and as directed. |
| 33 | M&L Steel Work in Tubular /hollow section as in Trussesand post including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-4923 grade YSt.-240 complete all as specified and as directed. |
| 34 | S&F Rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of Fe-410-W(Gde-E-250) quality-A complete all as specified and as directed. |
| 35 | Refixing only Rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of Fe-410-W(Gde-E-250) quality-A complete all as specified and as directed. |
| 36 | S&F Rolled mild steel angle,flats,etc independentlyfixed without connecting plates etc posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 ® complete all as specified and as directed. |
| 37 | M&L Framed Work such as Grills, Gratings, etc. with ends of Bars shouldered and/or riveted, or forged into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walk Ways; Railings; Framework of Water Tanks and Similar Work, conforming to Fe-290, Gde-E-165, complete all as speci-fied and as directed. |
| 38 | Plain mild steel wire,galvanised class 3,in fencing including straining and fixing to wood, concrete or steel posts and/or to straining bolts,including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc. as directed (each line of wire to be measured) ® complete all as speci-fied and as directed. |
| 39 | S&F Fabricated Aluminium anodisedframe (Two or Three track) for windows and ventilators using aluminium sections of size and type approved by Engineer-in-Charge with one or more rebates including jointing cleats,snap beadingetc, completeallas specified and as directed. |
| 40 | M&L Anodised Aluminium Window and Ventilator Shutters, sliding type without Sash Bars, Aluminium Sections weighing 0.55 Kg/Metre including necessary Joining Cleats, Glazing Clips, Rubber Packing, anodised Aluminium Snap Beading, Screws, ), complete all as specified and as directed. |
| 41 | S&F Mild Steel Butt Hinges, size of Hinges 100mm, medium weight, Cold Rolled and fixed, complete all as specified and as directed. |
| 42 | S&F Stainless Steel Butt Hingessize of Hinges 100 mm (medium weight) and fixed, complete all as specified and as directed |
| 43 | S&F Mild steel Continuous (Piano) Hinges, width of Flaps (when open) 30mm, bright finish and fixed, complete all as specified and as directed. |
| 44 | S&F Aluminium anodized, Barrel Tower Bolt 100mm long, Extruded Section and fixed, complete all as specified and as directed. |
| 45 | S&F Hasp and staple 100mm size, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed. |
| 46 | S&F 200mm long Aluminium alloy, anodised, Sliding Door Bolt with Hasp, Staple (Bolt type) and Fixing Clips of Sheet, Cast or Extruded Sections and Fixing Bolts and Sliding Bolts of Extruded Sections or Cast-Aluminium alloy and fixed, complete all as specified and as directed. |
| 47 | S&F Aluminium alloy Handle 150mm long, Extruded Section, Fabricated type, anodized and fixed, complete all as specified and as directed. |
| 48 | S&F Mild steel 200mm ordinary pattern door spring including roller and roller plate complete all as specified and as directed. |
| 49 | S&F Floor door stopper of brass body and tongue, anodised with hard drawn steel spring (overall length of cover plate 140mm) complete all as specified and as directed. |
| 50 | S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass polished bright finished complete all as specified and as directed. |
| 51 | S&F Aluminum Anodised Curtain Rod 19/20 mm dia with two nos of fancy type end knobfor door window opening complete all as specified and as directed. |
| 52 | S&F Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staplescomplete all as specified and as directed. NOTE: Cost of Second Class Hardwood Bead-ing shall deemed to be included against Glazed and Skeleton Shutter. |
| 53 | S&F Pre-painted colour galvalume aluminium zinc coating GI based corrugated steelsheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 54 | S&F Pre-painted colour galvalume aluminium zinc coating GI based plain steelsheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 55 | M&L False ceiling with "Galvanised powder coated snap grid of size 600 mm x 600 mmmain "T" section 32mm x 24mm x .25mm, cross tee 26mm x 24mm x .25mm thick and Wall angle 25mm x 25mm x .25mm as on edges/sides including hanging arrangements with 1.6mm dia double GI suspenderincluding 4mm thick E Boarddecorative type alongwith all necessary fixinging arrangement complete all specified and as directed. |
| 56 | M&L Rendering 15mm thick in Cement Mortar 1:4,on existing roof surface after applyingcement slurry @3 kg/ sqm and a coat of hot blown bitumen of grade 85/25 @ 1.2 kgcomplete all as specified and as directed. |
| 57 | M&L Water Proofing Treatment on existing cleaned RCC Roof with the following Specifications and Manufacturer"s instructions, complete all as specified and as directed :- (a) Preparing and cleaning of fully drysurface as per IS:3067-1966. (b) Applying a layer of APP based Polymeric Membrance; 3.0mm thick (minimum) weighing 3.60 Kilogram per Square Metre (reinforced) with Polyster Non Woven Fabric weighing not less than 160 Grams per Square Metre by Torch application. The overlaps shall be minimum 100mm on the Transverse direction and 75mm on Longitudinal direction including removal and refixing of PVC tank at the same place or any other situation with all required necessary fittings (c) Applying one coat of Aluminium Paint @ 0.10 Litre per Sqm over APP based Polymeric Membrane. |
| 58 | S&F 18/20mm thick Block boards Grade-2 quality,interior grade laminated sheet with decorative face, veneer on one face commercial type, fixed with screw to timber frame workcomplete all as specified and as directed. |
| 59 | M&L Pre-laminated Particle Board 12 mm thick, interior grade, pre-laminated one side with decorative choice lamination and other side balancing white lamination fixed with Screws to Timber Frame Work as incup board shelf ,Pelmet Box or in narrow widths not exc. 15 Cm each, rebated or flat edged,complete all as specified and as directed. |
| 60 | M&L Cement Concrete type D2 (1:4:8) using 40mm graded aggregate 75mm thick in Sub-bases, finishing concrete surfaces fair and even, complete all as specified and as directed. |
| 61 | M&L Cement Concrete 1:3:6 (40mm graded crushed stone aggregate) 75mm thick as in plinth protection/ path / paving laid in alternate Bays finished Concrete Surfaces Even and fair without using Extra Cement including providing Con-struction Joints every 3.0 Metre interval (width -wise) and filling with sealing compound with grade A, complete all as specified and as directed. |
| 62 | M&L Glazed Ceramic Coloured Tile 7 to 8mm thick (square/ rectangular), area of each tilenot exc 0.36 sqm as in floors over and including 15mm thick screed bed/bedding layer in CM 1:6set and jointed in neat cement slurry and pointed in white/coloured cement to match the existing floor complete all as specified and as directed. |
| 63 | M&L Glazed Ceramic Coloured Tile 7 to 8mm thick (square/ rectangular), area of each tilenot exc 0.36 sqm on Vertical Surfaces such as Skirting, Dados, Risers to Steps, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over and including 10mm thick backing layerin cement mortar (1:4) complete all as specified and as directed. |
| 64 | M&L Coloured non skid ceramics tiles 7 to 8mm thick (square/ rectangular), area of each tile exc 0.18 sqm but not exc 0.38 sqm as in floors over and including 15mm thick screed bed/bedding layer in CM 1:6set and jointed in neat cement slurry and pointed in white/coloured cement to match the existing floor complete all as specified and as directed. |
| 65 | M&L Glazed Ceramic Coloured Tile 350x250 x 7.0mm /450x350x7mm thick on Vertical Surfaces such as Skirting, Dados, Risers to Steps, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over and including 10mm thick backing layerin cement mortar (1:4) complete all as specified and as directed. |
| 66 | M&L Chequered Cement Concrete Tiles 200 x 200x 22-25 mm thick with antifungal paint, setScreed bed of 20mm thick in Cement Mortar 1:6 and Jointed and pointed in Neat Cement Slurry with Grey Cement as in Floor, etc., complete all as specified and as directed. |
| 67 | M&L20mm thick coloured Granite tilesmachine cut as in floorlaid over 15mm thick in cement mortar (1:6) set and jointed with grey cement slurry and pointed with epoxy joint filler with admixture of pigment to match the shade of granite tile including grinding and polishing complete all as specified and as directed. |
| 68 | M&L20mm thick coloured Granite tilesmachine cut as in vertical surfaces such as skirting/dado laid over 10mm thick in cement mortar (1:4) set and jointed with grey cement slurry and pointed with epoxy joint filler with admixture of pigment to match the shade of granite tile including grinding and polishing complete all as specified and as directed. |
| 69 | S&F Machine cut kota stone slab flooring 20-25mm thick (size min 550x 550)laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (Granite Finish Polishing) complete over 20mm thick 1:6cement mortar screed bed complete all as specified and as directed. |
| 70 | S&F Machine cut kota stone slab20-25mm thick on Vertical Surfaces such as Skirting, Dados, Risers to Steps, etc. Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over10 mm thick backing layerin cement mortar (1:4)including rubbing and polishing complete all as specified and as directed. |
| 71 | M&L Rendering15mm thick in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces, finishing plastered surfaces Even and fair without using Extra Cement complete all as specified and as directed. |
| 72 | M&L Rendering15mm thick in Cement Mortar 1:4 on other than fair faces of Brick Walls or on Concrete Surfaces, finishing plastered surfaces Even and Smooth without using Extra Cement complete all as specified and as directed. |
| 73 | M&L Rendering 5.0mm thick in Cement Mortar 1:3 on Concrete Surfaces of Ceiling, etc. finishing Plastered Surfaces Even and Smooth, without using Extra Cement. complete all as specified and as directed. |
| 74 | M&L preparing new Surfaces of Ceiling and applying Three Coats of White Wash, complete all as specified and as directed. |
| 75 | M&L Complete removal of existing treatmentSurfaces of Ceiling and applying Three Coats of White Wash, complete all as specified and as directed. |
| 76 | M&L Preparing old decorated Plaster Surfaces of Wall and applying One Coat of oil bound(any colour /tint) complete all as specified and as directed. |
| 77 | M&L Preparing new plastered surfaces of wall and and applyingTwo Coats of DistemperOil Emulsionover a coat of primer andapplied over 2mm thick BIRLA/JK water proof wall care putty including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed. |
| 78 | M&L Complete removal of old decorated surfaces of wall and applyingTwo Coats of DistemperOil Emulsionover a coat of primer andapplied over 2mm thick BIRLA/JK water proof wall care putty including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed. |
| 79 | M&L Complete removal of old decorated surfaces of wall and applyingTwo Coats of DistemperOil Emulsionover a coat of primer complete all as specified and directed. |
| 80 | M&L Preparingold decorated plastered surfaces of Walls and applying OneCoats of Exterior Emulsion Paint Weather Coat (any colour /tint)(as per Manufacturer’s instructions), complete all as specified and as directed. Make- Asian (apex ultima), Berger Paints-Weathercoat Lifelong7 ,Dulux Paints-Wheathershield Ultraclean |
| 81 | M&L Preparing new plastered surfaces of Walls and applying Two Coats of Exterior Emulsion Paint Weather Coat over a coat ofPrimer (as per Manufacturer’s instructions) complete all as specified and directed. |
| 82 | S&F Heat absoring Glass 4.0mm thickof any size with aluminium beading, Square or Rectangular, not exc. 0.50 Sqm, complete all as specified and as directed. |
| 83 | S&F Figured Glass 4.0mm thick, Pin Head / frosted type and glazing with Wooden Beads or Oil Putty in Square or Rectangular, not exc. 0.50 Sqm, complete all as specified and as directed. |
| 84 | M&L Preparing new Wood and Wood Based Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Pink Primer, complete all as specified and as directed. |
| 85 | M&L Preparing old Wooden Surfaces of any description not otherwise decribed over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed. |
| 86 | M&L Preparing old Steel Surfaces of any description not otherwise decribed over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed. |
| 87 | M&L Preparing new Steel or Iron Surfaces of any description,exe 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Red Oxide, Zinc Chrome Primer, complete all as specified and as directed. |
| 88 | S&F Unplasticised PVC pipes 15 mm boreof pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete as all specified and as directed. |
| 89 | S&F Unplasticised PVC pipes 20 mm boreof pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete as all specified and as directed. |
| 90 | S&F Bib Tap 15mm dia (bore), Cast Copper Alloy, fancy type Chromium Plated, screwed down high pressure with Crutch or Butterfly Handle, screwedboth Ends for Iron Pipe or for Unions and fixed-in-repairs, complete all as specified and directed. |
| 91 | S&F Pillar Tap 15mm bore, cast copper alloy, Fancy type, chromium plated, with capstan heads, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed Shanks and Fly-nuts, screwed for Iron Pipe and fixed complete all as specified and as directed. |
| 92 | S&F Stop Valve 15 mm dia (bore), Cast Copper Alloy, Concealed type, Chromium Plated (Fancy type long Shank and Cup) screwed down high pressure with Crutch or Butterfly Handle, screwed both Ends for Iron Pipes or for Unions and fixed-in-repairs, complete all as specified and as directed. |
| 93 | S&F Stop Valve 15 mm dia (bore), Cast Copper Alloy,Chromium Plated (Fancy type long Shank and Cup) screwed down high pressure with Crutch or Butterfly Handle, screwed both Ends for Iron Pipes or for Unions and fixed-in-repairs, complete all as specified and as directed. |
| 94 | S&FABS body chromium plated shower rose 125mm size with revoiving joint including fixing to steel pipe or union as inrepair complete all as specified and directed. |
| 95 | S&F PVC Conncetions 15mm size with PTMT Nuts of length 450mm and fixed-in-repairs, complete all as specified and as directed. |
| 96 | S&F Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long as in repair complete all as specified and as directed. |
| 97 | S&F Mirror Bevelled Edge 600x450mm, Selected quality Glass, mounted on 6.0mm thick AC Building Board or Commercial Ply-wood and fixed to Wooden Plugs with Chro-mium Plated Brass Screws and Cup Washers including Taking down unserviceable Mirror, complete all as specified and as directed. |
| 98 | S&F Tubular towel rail 600mm long chromium plated ,20mm dia D typewith brass screws and wooden/plastic cleats as in repair complete all as specified and directed. |
| 99 | S&F Chromium Plated soap dish fixed to wall with necessary fixing arrangementas in repair complete all as specified and directed. |
| 100 | S&F Stainless Steel Sink with Drainage Board l.0mm thick Overall size 915mm x 460mm and Bowl size 410 mm x 355mm x 165 mm for Kitchen or Laboratory with Plugs, Washers,Brass chromium plated Waste Fitting 32mm dia,PVC waste pipe, a Pair of Cast Iron Brackets duly Painted including Cutting and Pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 including Taking down/out unserviceable Sink and connected Items, complete all as specified and as directed. |
| 101 | Supply and fixstainless steelkitchen rack of size 31"x 36"x10" with 0.63mm stainless steel sheet with all fittings accessoriesas in repair complete as directed. |
| 102 | Taking down existing damaged water closet alongwith complete PCCfrom sunken floor and providing new EWC / IWC and water proofing treatment to sunken floor as per following stage :- (i) 15mm thick plastering in CM (1:2) with WPC at all around and base of sunken floor with proper slope. (ii) Applying a coat of 85/25 gde hot bitumen @ 0.7Kg/Sqm over a coat of bituminous primer @0.5Kg/Sqm and then pasteing of 150 micron polythene film / 3mm APP membrane, natural colour with cold cut back adhessive. (iii) Providing cement concrete to fill up the sunken floor (PCC 1:4:8) after testing of water tightness. |
| 103 | S&F Vitreous China White Squatting Pan ‘ORISSA’ Pattern, size 580x440mm with ‘P’ or ‘S’Trap, Integral Foot Rest, providing Joints between Flush Pipe and Socket of WC Pan including Flushing Cistern and Flush Pipe, fixing with and including provision of cement Concrete Bedding including Taking out/ down unserviceable WC Pan and connected Items, complete all as specified and as directed. |
| 104 | S&F Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back or Angle Back Type) with 32mm dia Brass Chromium Plated Waste Fitting, a pair of Cast Iron Brackets duly painted including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 including taking down/out unserviceable Wash Hand Basin and connected Items, complete all as specified and as directed. |
| 105 | S&F White PVC Flushing Cistern 10 Litre capacity, Low Level Valve Less, Syphonic Action type with Inlet, Ball Valve, Float and Handleincluding Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 and fixed including taking down/out unserviceable Flushing Cistern and connected Items, complete all as specified and as directed. |
| 106 | S&F Chromium Plated waste coupling heavy full thread 32mm (brass) fixed toglazed ware basinincluding necessary fixing arrangement along with 610mm long waste pipeas in repair complete all as specified and directed. |
| 107 | S&F Chromium Plated waste coupling heavy full thread 40mm (brass) fixed tostainless steel sink including necessary fixing arrangement along with 610mm long waste pipeas in repair complete all as specified and directed. |
| 108 | S&F PVC (SWR) Soil, Waste and Ventilating Pipe 75mm bore (dia), single socketed, in any length with Rubber Ring Joints fixed to Walls, complete all as specified and as directed. |
| 109 | S&F PVC (SWR) Soil, Waste and Ventilating Pipe 110mm bore (dia), single socketed, in any length with Rubber Ring Joints fixed to Walls, complete all as specified and as directed. |
| 110 | Fixing only PVC (SWR) Soil, Waste and Ventilating Pipe 75mm bore (dia), single socketed, in any length with Rubber Ring Joints fixed to Walls, complete all as specified and as directed. |
| 111 | Fixing only PVC (SWR) Soil, Waste and Ventilating Pipe 110mm bore (dia), single socketed, in any length with Rubber Ring Joints fixed to Walls, complete all as specified and as directed. |
| 112 | S&F PVC (SWR) Bend 75mm bore (dia), any type, equal or unequal with Access Door, etc. and Jointing with Solvent Cement, complete all as specified and as directed. |
| 113 | S&F PVC (SWR) Bend 110mm bore (dia), any type, equal or unequal with Access Door, etc. and Jointing with Solvent Cement, complete all as specified and as directed. |
| 114 | S&F PVC (SWR) Junction 75mm bore (dia), Single (Single T) equal or unequal and Jointing with Solvent Cement, complete all as specified and as directed. |
| 115 | S&F PVC (SWR) Junction 110mm bore (dia), Single (Single T) equal or unequal and Jointing with Solvent Cement, complete all as specified and as directed. |
| 116 | S&F PVC (SWR) Nahani/Floor Trap 75mm bore (dia) Outlet, Plain with Grating and Jointing with Solvent Cement, complete all as specified and as directed. |
| 117 | S&F PVC (SWR) Nahani/Floor Trap 110mm bore (dia) Outlet, Plain with Grating and Jointing with Solvent Cement, complete all as specified and as directed. |
| 118 | M&L Salt-Glazed Stoneware Drain Pipes of Internal dia 150mm Grade ‘A’, laid in concrete bed at trenches, jointed in Cement Mortar 1:1 and tested, complete all as specified and as directed. NOTE : Earthwork shall be Measured and Paid separately under relevant Item(s). |
| 119 | M&L Cement Concrete type C2 , 1:3:6 (40mm graded aggregate) as in Concrete bed to salt-glazed stoneware drain pipes of internal dia 150mm, including packing under and haunching against the sides of pipes after they are laid and tested, complete all as specified and as directed.Note 1:-The contract sum shall be arrived at after deducting amount of schedule of credit from the total quoted amount. Note 2-Contractor"s supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embossed with contractor"s firm name while carrying out any activities in defence area for better check of security purpose.Note 3:-The tenderer (all eligible contractors) shall ascertain the taxes & levies as on date. The subject tender caters all the taxes & levies as on date including the latest notification of GST issued as on date ( issued by Central Board of Indirect Taxes and Customs) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
