Public Health Engineering Department-PHED has published Tender For Annual Stage Contract For Maintenance Of Water Treatment Plants At Alusteng For The Year 2024-25.. Submission Date for this Tender is 08-05-2024. Water Treatment Plant Tenders in Srinagar Jammu And Kashmir. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 06-May-2024 | Extension of Dates | Date | 08-05-2024 |
2 | 06-May-2024 | Corrigendum | Other | 08-05-2024 |
Sl. No. | Item Description |
1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 min width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides & ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: |
2 | In All kinds of Soils |
3 | Lead upto 1 metre from cutting edge |
4 | 25 metre beyond 1 metre from cutting edge |
5 | 50 metre beyond 1 metre from cutting edge |
6 | Ordinary Rock |
7 | Lead upto 1 metre from cutting edge |
8 | 25 metre beyond 1 metre from cutting edge |
9 | 50 metre beyond 1 metre from cutting edge |
10 | Excavation in Water Bound Macadam road including stacking of serviceable and unserviceable material separately and disposal of unserviceable material lead up to 50mtr and lift up to 1.5mtr disposal material to be neatly dressed. |
11 | Excavation in Bituminous road including stacking of serviceable and unserviceable material separately and disposal of unserviceable material lead up to 50mtr and lift up to 1.5mtr disposal material to be neatly dressed. |
12 | Excavation in bajri path including stacking of serviceable and unserviceable material separately and disposal of unserviceable material lead upto 50 m and lift upto 1.5 m, disposed material to be neatly dressed |
13 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) & for shafts, wells, cesspits and the like not exceeding 10sqm on plan,including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: |
14 | In All kinds of Soils |
15 | Ordinary Rock |
16 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. |
17 | In All kinds of Soils |
18 | Ordinary Rock |
19 | Earthwork in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30cm in depth, 1.5m in width as well as 10m2 on plan) including disposal of excavated earth lead upto 50meters & lift upto 1.5m, as directed by Engineer-in-Charge. |
20 | In All kinds of Soils |
21 | Ordinary Rock |
22 | Excavation in Road/Concrete/Tile work by using breaker/hammer/drill of any capacity and power including hire charges of hammer/drill, Generator, operator, cost of fuel,cost of to and fro carriage, extension wires/cables and whatsoeverrequired for conducting smooth operations |
23 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
24 | Disposal of surplus earth from site up to the dumping site of work for an average lead of 5 kms. |
25 | Clearing of jungle including uprooting of trunk vegetation, grass, brush wood, trees and saplings of girth upto 30cm, removal of rubbish upto a distance of 50mtr outside the periphery of the area cleared. |
26 | Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared. |
27 | Restoration/repairs of various dia of Sluice valves by way of replacement/providing of worn out parts viz Sluice Rod/Check nuts/Disk including fabrication, finishing of required size, dia. The job is to be carried out as per the direction of site in-charge. besides the solvaged material shoul be deposited in Div. Store |
28 | Sluice Rod (Stainless Steel) (As per sample) |
29 | 700mm dia |
30 | 600mm dia |
31 | 500mm dia |
32 | 450mm dia |
33 | 400mm dia |
34 | 350mm dia |
35 | 300mm dia |
36 | 250mm dia |
37 | 200mm dia |
38 | 150mm dia |
39 | 100mm/80mm dia |
40 | Check nuts (Gunmetal) (As per sample) |
41 | 700 mm dia |
42 | 600mm dia |
43 | 500mm dia |
44 | 450mm dia |
45 | 400mm dia |
46 | 350mm dia |
47 | 300mm dia |
48 | 250mm dia |
49 | 200mm dia |
50 | 150mm dia |
51 | 100mm/80mm Dia |
52 | Decamping of main cable at Filtration Plants from LT poles, cutting of main cable by Hexa blades, providing/ fixing of bone china insulators, thimbles, cost of PVC tape rolls, fuse wire, engagement of skilled/ non skilled labours, cost of rope, hire charges of long stair etc.Complete job.(cost of new cable, if required, to be paid as per cost and rate analysis at market rates) |
53 | Providing and fixing including Fabrication, testing, commissioning at site M.S pipe Specials - M.S tees , bends, collars flanges including costNuts, Bolts, washers etc & all sorts of carriages upto site of work, as per requirement at site complete job. |
54 | Providing and fixing including testing, commissioning & fabricating at site M.S pipe lenghts of dimensions required and directed by engineer in charge (for straight lengths of more than 0.9 metre incld. all sorts of carriages upto site of work, as per requirement at site complete job. |
55 | Repairs/restoration to the damaged 3-Phase of various capacities of horizontal/ Vertical/submersible pumping units of all kinds by way of disconnecting the power supply connections of Motor then dismantling of Motor from the base frame. The job includes dismantling of Motor assembly and then extracting the damaged/burnt stator coils from the stator coils from the stator slots using proper tools and takles avoiding damage to the shtator core. The job includes inserting proper insulation in all slots and then complete rewinding of 3-Phase Motors in copper wire insulated having specific size and guage of superior quality and same within the existing power meters. The job shall further include registration of Motors on the frame and then re-coupling of pump Motor and then completing the electric connections. The job includes cost on account of skilled man power, involved, tools, tackles besides all sorts of carriage involved complete. The rate includes rebate on old scrape to be retained by the contract agency. |
56 | 2-HP and Below |
57 | 3-HP |
58 | 5-HP |
59 | 7.5-HP |
60 | 10-HP |
61 | 15-HP |
62 | 20-HP |
63 | 30-HP |
64 | 40-HP |
65 | 50-HP |
66 | 75-HP |
67 | Dismantling of complete reduction gear unit of de-sludge bridges for repairs by way of providing & manufacturing of complete reduction gear with hub.The job includes costing of brass material,grinding & finishing of virme in order to make the new teeth, replacement of damaged oil seals by way of new one, replacement of ball bearings, pouring of required specific gravity ear oil in order to run the reduction gear in smooth order,refaxing of same at the site of work incl. all sorts of carriage from site of work upto workshop & back to site of work including testing & successful commissioning (complete job) |
68 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
69 | Removing dry or oil bound distemper,water proofing cement paint & the like by scrapping & sand papering & preparing the surface smooth including necessary repairs to scratches etc. complete. |
70 | Overhauling voltage stabilizers/Servo Stabilizers installed at site. The job includes pouring/filling of transformer oil of required specified gravity replacement of driven rotars (automatic),replcement of voltage meters, Amp meters, indicators, thimbles etc. complete job, making the unit complete functional for bearing of required load. The job also includes labour charges,cost of wiring,pin sockets & all sorts of carriages from site of work upto the workshop & back to actual site of work incld. installation at site & testing, successful commissioning.(Single Phase/ThreePhase) comp. job |
71 | 10Kv and Lower |
72 | 20 KV to 30 KV |
73 | 40KV to 50KV |
74 | 60 KV to 230 KV |
75 | Replacement of Damaged Digital Card |
76 | 10Kv and Lower |
77 | 20 KV to 30 KV |
78 | 40KV to 50KV |
79 | Above 50KV |
80 | Replacement of Damaged AC Synchronous Motor |
81 | 10Kv and Lower |
82 | 20 KV to 30 KV |
83 | 40KV to 50KV |
84 | Above 50KV |
85 | Desilting of canal by Mechanical means. |
86 | Dry Silt |
87 | Wet Silt |
88 | Desilting of canal by Manual means. |
89 | Dry Silt |
90 | Wet Silt |
91 | Desilting of various structures through washout systemof silt/soil in any condition( hardened, layered etc).The job also includes, washing & cleaning of walls,beds,drains & floor etc with bleaching powder solution complete job.(Floculator,S.R,settling chamber etc.) |
92 | Desilting ofvarious structures by manual means of silt/soil in any condition (hardened, layered etc). including disposal of desilted material from site premises within 100m lead with all carriages lead & lifts etc , tools tackels required wherever washout system is not workable ( buckets , ropes etc ) The job also includes, washing and cleaning of walls, beds, drains and floor etc. with bleaching powder solution complete job.(Floculator, S.R, settling chamber etc.) |
93 | Removing of silt/slush/mud and other material accumulated in sumps, wells, intake channels and on the nallah side of pump station by way of mechanical dredger mounted on boat having sufficient length of suction pipe and disposal arrangement. The material is to be disposed on the opposite side of nallah or as directed by the site-incharge. The job includes all T&P incl. carriages used for the execution of the work complete. |
94 | Removal of old choked filter media (sand & gravel) manually by scrapping and removing layer wise with the help of rope & buckets carefully to ensure separation of different grades/gauges and stacking/ dumping within an average lead of 100 mtrs. The job includes cleaning/ rubbing the surface of filter media beds after removal of filter media etc as directed by Engineer in charge complete job. |
95 | Washing/ Cleaning/ Sieving of filter media of all grades getting free from all dirt, clay, dust etc. The job includes stacking of serviceable cleaned filter media & to separate the different sizes for use in layers (measurement to be taken in finished form). |
96 | Providing and Supplying of filter media (sand and gravel) at site incl. all carriages upto site of work from Source and Spreading of same on filter bed conforming to all specifications as per CPHEEO manual. |
97 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. |
98 | Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable materialwithin 50 meters lead as per direction of Engineer-in-charge: In cement mortar |
99 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50meters lead as per direction of Eng.- in charge:1:3:6 or richer mix (i/c equivalent design mix) |
100 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
101 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
102 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) |
103 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and strutsupto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
104 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level: Cold twisted bars |
105 | Reinforced cement concrete work in beams,suspended floors,roofs having slope upto 15°, landings,balconies,shelves,chajjas,lintels, bands, plain window sills, staircases & spiral stair cases upto five level incl. curing but excluding the cost of centering, shuttering, finishing & reinforcement with1:1½:3 (1 cement: 1½ coarse sand: 3 graded stone aggregate 20mm nominal size) |
106 | Providing & laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments,pillars, posts, struts,buttresses,string or lacing courses, parapets,coping,bed blocks, anchors blocks, plain window sills, fillets etc up to floor V level, including curing but excluding the cost of centring,shuttering & finishing with 1:2:4 (1cement: 2coarse sand : 4 graded stone agg. 20 mm nominal size) |
107 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate. |
108 | Replacement /supply of PVC gate valves for bleaching /alum tanks/ Foot valves and PVC pipes of reputed make. (Prince/Nike) |
109 | 20 mm dia Gate valve |
110 | 25 mm dia Gate valve |
111 | 32 mm dia Gate valve |
112 | 40 mm dia Gate valve |
113 | 50 mm dia Gate valve |
114 | 20 mm dia PVC pipe (B-class) |
115 | 25 mm dia PVC pipe (B-class) |
116 | 32 mm dia PVC pipe (B-class) |
117 | 40 mm dia PVC pipe (B-class) |
118 | 50 mm dia PVC pipe (B-class) |
119 | Repairs to horizontal/vertical/submersible pumping unit of any kind by way of repairs/replacement of worn out parts, dismantling of pump & reassembling after conducting the necessary repairs, greasing,all sorts of carriages, leads & lifts & successful testing of the pumping unit on full load.The rate includes rebate on old scrape to be retained by the contract agency. |
120 | Impeller |
121 | Upto 3 HP |
122 | 5 HP |
123 | 7.5 HP |
124 | 10 HP |
125 | 15 HP |
126 | 20 HP |
127 | 30 HP |
128 | 40 HP |
129 | 50 HP |
130 | 75 HP |
131 | Bearing |
132 | Upto 3 HP |
133 | 5 HP |
134 | 7.5 HP |
135 | 10 HP |
136 | 15 HP |
137 | 20 HP |
138 | 30 HP |
139 | 40 HP |
140 | 50 HP |
141 | 75 HP |
142 | Check Nut |
143 | Upto 3 HP |
144 | 5 HP |
145 | 7.5 HP |
146 | 10 HP |
147 | 15 HP |
148 | 20 HP |
149 | 30 HP |
150 | 40 HP |
151 | 50 HP |
152 | 75 HP |
153 | Shaft /packing |
154 | Upto 3 HP |
155 | 5 HP |
156 | 7.5 HP |
157 | 10 HP |
158 | 15 HP |
159 | 20 HP |
160 | 30 HP |
161 | 40 HP |
162 | 50 HP |
163 | 75 HP |
164 | Replacement of old damaged GI Gate valve/ Sluice valve by providing / fixing of new Gate valve/ Sluice valve (approved brand) including cost of nuts,bolts,rubber insulations all carriages up to site of works complete.The item should be of reputed make of first class as per the instruction of Engineer in charge. Besides the damaged Gate valve/ sluice valve should be deposited in the divisional store. |
165 | 700 mm dia Sluice valve |
166 | 600 mm dia Sluice valve |
167 | 500 mm dia Sluice valve |
168 | 400 mm dia Gate valve |
169 | 350 mm dia Sluice valve |
170 | 300 mm dia Sluice valve |
171 | 250 mm dia Sluice valve |
172 | 200 mm dia Sluice valve |
173 | 150 mm dia Sluice valve |
174 | 100 mm dia Sluice valve |
175 | 80 mm dia Sluice valve |
176 | 100 mm dia Gate valve |
177 | 80 mm dia Gate valve |
178 | 65 mm dia Gate valve |
179 | 50 mm dia Gate valve |
180 | 40 mm dia Gate valve |
181 | 25 mm dia Gate valve |
182 | 20 mm dia Gate valve |
183 | Carriage of any kind of material from divisional store/ different sources by mechanical means up to dumping site of work, including loading, unloading and stacking etc. complete. |
184 | Three wheeler Load carrier/LMV loader avg. lead upto 03Kms and upto full capacity load (weight and size) , to and fro. |
185 | Three wheeler Load carrier/LMV loader avg. lead upto 05Kms and upto full capacity load (weight and size) , to and fro. |
186 | Three wheeler Load carrier/LMV loader avg. lead upto 8Kms and upto full capacity load (weight and size) , to and fro. |
187 | Three wheeler Load carrier/LMV loader avg. lead upto 12 Kms and upto full capacity load (weight and size) , to and fro. |
188 | Three wheeler Load carrier/LMV loader avg. lead upto 15 Kms and upto full capacity load (weight and size) , to and fro. |
189 | Four wheeler mid size pickup truck (Mobile Load carrier/ loader) avg. lead upto 03Kms and upto full capacity load (weight and size) , to and fro. |
190 | Four wheeler mid size pickup truck (Mobile Load carrier/ loader) avg. lead upto 05Kms and upto full capacity load (weight and size) , to and fro. |
191 | Four wheeler mid size pickup truck (Mobile Load carrier/ loader)avg. lead upto 10Kms and upto full capacity load (weight and size) , to and fro. |
192 | Four wheeler mid size pickup truck (Mobile Load carrier/ loader)avg. lead upto 15 Kms and upto full capacity load (weight and size) , to and fro. |
193 | Four wheeler mid size pickup truck (Mobile Load carrier/ loader)avg. lead upto 20 Kms and upto full capacity load (weight and size) , to and fro. |
194 | Four wheeler mid size pickup truck (Mobile Load carrier/ loader)avg. lead upto 25 Kms and upto full capacity load (weight and size) , to and fro. |
195 | Heavy and medium duty materialtruck/tipper/ loader/dumperavg. lead upto 05Kms and upto full capacity load (weight and size) , to and fro. |
196 | Heavy and medium duty materialtruck/tipper/ loader/dumperavg. lead upto 08Kms and upto full capacity load (weight and size) , to and fro. |
197 | Heavy and medium duty materialtruck/tipper/ loader/dumperavg. lead upto 12Kms and upto full capacity load (weight and size) , to and fro. |
198 | Heavy and medium duty materialtruck/tipper/ loader/dumperavg. lead upto 15 Kms and upto full capacity load (weight and size) , to and fro. |
199 | Heavy and medium duty materialtruck/tipper/ loader/dumperavg. lead upto 20Kms and upto full capacity load (weight and size) , to and fro. |
200 | Carriage of materials by manual labour from dumping site to actual site of work, including loading, unloading and stacking etc. back and forth |
201 | 01 labourer an avg. lead upto 300 mtr. |
202 | 01 labourer an avg. lead upto 500 mtr. |
203 | 01 labourer an avg. lead upto 800 mtr. |
204 | 01 labourer an avg. lead upto 1000 mtr. |
205 | Centering & shuttering including strutting,propping etc. & removal of form for: |
206 | Foundations, footings, bases of columns etc. for mass concrete. |
207 | Walls (any thickness) including attached pilasters, buttresses, plinth & string courses etc. |
208 | Columns, pillars, piers, abutments, posts and struts. |
209 | Suspended floors, roofs, landings, balconies and access platforms. |
210 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
211 | Stairs (excluding landings) except spiral staircases. |
212 | Clearing snow (without frost) from roads manually. |
213 | Snow depth upto 150 mm |
214 | Snow depth over 150 mm but upto 250mm |
215 | Snow depth over 250 mm but upto 350mm |
216 | Snow depth over 350 mm but upto 450mm |
217 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with:Cement mortar 1:6 (1 Cement : 6 coarse sand) Quarry |
218 | Dry random rubble masonry with hard stone in foundation and plinth: With bond stone. (Nallah) |
219 | Renewing glass panes, with wooden fillets wherever necessary : Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) |
220 | Repairs/replacement of water closet / flushing cistern including necessary controlled device incld. replacement of accessories etc. complete job |
221 | Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil. |
222 | Plugging the existing ground to a depth of 15cm to 25cm & watering the same in- All kinds of soil. |
223 | Providing & Fixing of MCCB Havells make the job includes dismantling of damaged/non functional Amp. MCCB & fixing of new one including all sorts carriage from source to workshop including carriages of salvaged material from filtration plant up to Divisional Stores including testing, installing and commissioning complete job |
224 | 04 Pole 200 Amp.(MCCB) |
225 | 04 Pole 100 Amp.(MCCB) |
226 | 03 Pole 200 Amp. |
227 | 03 Pole 100 Amp. |
228 | 03 Pole 63 Amp. |
229 | Single pole 63 AMP. |
230 | Single Pole 32 Amp. |
231 | Providing & Fixing ofStarters ( of all kinds star-delta, D.O.L...) of reputed Make(L&T, Crompton etc),the job includes dismantling of damaged/nonfunctional starter and fixing of new one incl. all sorts of carriages from source to workshop including carriages of salvaged materials from filtration plant upto Divisional Stores, including testing, installing and commissioning complete job. |
232 | Upto 10HP |
233 | Upto 20HP |
234 | Upto 30HP |
235 | Upto 40HP |
236 | Upto 50HP |
237 | Upto 75HP |
238 | Providing and Fixing of running V-Belt of groove type for air blower, the job includes dismantling damages ones and fixing of new ones including successful testing, commissioning. All types of carriage complete |
239 | Providing fixing & commissioning of LED Flood Lights of 50 Watts with stand including all accessories required at site complete job inclusive all carriages. |
240 | Restoration of pipes due to frost / frozen including earth works excavation /dismantling /refilling / making good the same complete job in all respects. Up to 20mm to 100mm dia (by using blue lamp including cost of K. oil). |
241 | Fixing charges of Sluice Valves including Testing, Commissioning and carriages from divisional store to actual site of work or relocation at site , Complete job including all tools, tackles,nuts, bolts etc,man and machinery required. |
242 | 700 mm dia |
243 | 600 mm dia |
244 | 500 mm dia |
245 | 400 mm dia |
246 | 350 mm dia |
247 | 300 mm dia |
248 | 250 mm dia |
249 | 200 mm dia |
250 | 150 mm dia |
251 | 100 mm dia |
252 | Servicing & maintenance of 160 KVA (or lower)DG Set,The job includes replacement of lubrication oil filter,Diesel filters,Fan belts, coolant, Distilled water, Fuel filter, hose, hose clips, EngineM-oil (complete job for handing over in working condition) |
253 | Repair of Geysers (upto 60 lits) |
254 | Servicing and maintenance of AC |
255 | Charging of inverter battery including replacement of distal water |
256 | Unloading and stacking charges of Chemicals viz Bleaching Powder, Alumina Ferric by mechanical or manual means at various Plants. The job is to be carried out as perthe site incharge. |
257 | Supply of various items including all carriages and handling charges. |
258 | POL |
259 | Transformer Oil including carriage and labour |
260 | Gear Oil of Reputed ISI Make |
261 | M oil |
262 | Nuts, Bolts, Washers of All Sorts |
263 | Jane Packing 10 to 12mm thick |
264 | Grease |
265 | 8 piece ring/tool set |
266 | Hire Charges of Hydraulic excavator with driver and fuel |
267 | Beyound 450mm dia (Hire charges of crane, tripod & chain pully for dismantling of Sluice Valve wherevre required Complete Job. |
268 | Supply of skilled labours |
269 | Supply of unskilled labours |
270 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.(welded) |
271 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
272 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete. |
273 | Providing/ laying of stone soling hand packed in level. |
274 | Dismantling C.I. pipes manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes and lead at site within 50 meter lead as per direction of Engineer in-charge. Including excavation and refilling trenches after taking out the pipes. |
275 | Upto 150 mm diameter |
276 | Above 150 mm dia upto 300 mm dia. |
277 | Above 300 mm diameter. |
278 | Excluding excavation and refilling trenches after taking out the pipes |
279 | Upto 150 mm diameter |
280 | Above 150 mm dia upto 300 mm dia. |
281 | Above 300 mm diameter. |
282 | Labour for cutting C.I. pipesby manually /mechanical means withincluding all sort of hire charges |
283 | 80 mm diameter C.I. pipe |
284 | 100 mm diameter C.I. pipe |
285 | 125 mm diameter C.I. pipe |
286 | 150 mm diameter C.I. pipe |
287 | 200 mm diameter C.I. pipe |
288 | 250 mm diameter C.I. pipe |
289 | 300 mm diameter C.I. pipe |
290 | 350 mm diameter C.I. pipe |
291 | 400 mm diameter C.I. pipe |
292 | 450 mm diameter C.I. pipe |
293 | 500 mm diameter C.I. pipe |
294 | 600 mm diameter C.I. pipe |
295 | Providing/fabricating and fixing ofMS flanges of required thickness by welding including cost of cutting pipe ends to the pipes of different diasincluding cost ofnuts , bolts, & washers etc. complete job. |
296 | 50mm dia |
297 | 80mm dia |
298 | 100mm dia |
299 | 150mm dia |
300 | 200mm dia |
301 | 250mm dia |
302 | 300mm dia |
303 | 400mm dia |
304 | 450mm dia |
305 | 500mm dia |
306 | 600mm dia |
307 | 700mm dia |
308 | Providing lead caulked joints to spun iron or C.I pipes & specials incl. testing of joints but excluding the cost of pig lead |
309 | 100 mm dia. pipe |
310 | 125 mm dia. pipe |
311 | 150 mm dia. pipe |
312 | 200 mm dia. pipe |
313 | 250 mm dia. pipe |
314 | 300 mm dia. pipe |
315 | 350 mm dia. pipe |
316 | 400 mm dia. Pipe |
317 | 450 mm dia. pipe |
318 | 500 mm dia. pipe |
319 | 600 mm dia. pipe |
320 | 700 mm dia. pipe |
321 | Supply of pig lead to site including all carriages up to site of work complete. |
322 | Supply of spun yarn to site including all carriages up to site of work complete |
323 | Supply of fire wood/ rejection wood including all carriages up to site of work, complete. |
324 | Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket. |
325 | 100 mm dia pipes |
326 | 150 mm dia pipes |
327 | 200 mm dia pipes |
328 | 250 mm dia pipes |
329 | 300 mm dia pipes |
330 | 350 mm dia pipes |
331 | 400 mm dia pipes |
332 | 450 mm dia pipes |
333 | 500 mm dia pipes |
334 | 600 mm dia pipes |
335 | Laying in position centrifugally cast (spun) iron S&S or flanged pipes (excluding cost of pipe). |
336 | Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. |
337 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 meters lead. |
338 | Dismantling steel work manually/by mechanical means in built up sections without dismembering and stacking within 50 meters lead as per direction of Engineer-in-charge: |
339 | Extra for dismantling trusses,rafters,purlins etc. of steel work for every additional span of one meter or part thereof beyond 10mtr. |
340 | Extras for dismantling trusses,rafters,purlins etc of steel work for every additional height of one meter or part thereof beyond 5mtr |
341 | Dismantling steel work in single sections including dismembering & stacking within 50meters lead in:Channels,angles,tees & flats |
342 | Providing and fixing of 7/9/14 Watt LED lights of superior quality in place of damaged light bulbs, all complete with at least one year of warranty |
343 | 7/9 watt bulbs |
344 | 7/9 watt concealed lights |
345 | 14/15 watt concealed lights |
346 | Supply of 1.5mm, 2/2.5mm wire of Havell’s / Polycab or similar make. |
347 | Providing and fixing of standard Ist quality make non- return valves. The item includes cost of nuts, bolts, rubber insertions all carriage and tail pieces all complete job. |
348 | 20mm dia |
349 | 25mm dia |
350 | 40mm dia |
351 | 50mm dia |
352 | 65mm dia |
353 | 80mm dia |
354 | 100mm dia |
355 | 150mm dia |
356 | 200mm dia |
357 | 250mm dia |
358 | 300mm dia |
359 | Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required will be paid separately). |
360 | 50 mm dia. |
361 | 80 mm dia. |
362 | 100 mm dia. |
363 | Providing and fixing of reflective gauge (meters) scale (aluminium) for regulation/ maintained of water supplies. The item includes vertical members welding charges etc. all complete as per site requirement etc. (complete) |
364 | Disposal of surplus earth from site up to the dumping site of work for an average lead of 5kms. |
365 | Colour washing such as green blue or buff to give an even shade. |
366 | New work (two or more coats) with a basecoat of white washing with lime. |
367 | New work (two or more coats) with basecoat of whiting |
368 | Applying one coat of water thin able cement primer of approved brand and manufacture on wall surface. |
369 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
370 | Finishing walls with water proofing cement paint of required shade: Old work (one or more coats applied @ 2.20 kg/10sqm) over priming coat of primer applied @ 0.80 liters/10sqm complete including cost of priming coat. |
371 | Applying priming coat:With ready mixed pink or grey primer of approved brand & manufacture on wood work (hard & soft wood) |
372 | Applying priming coat: With ready mixed aluminum primer of approved brand & manufacture on resinous wood & ply wood |
373 | Applying priming coat: With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanized iron/steel works |
374 | Applying priming coat: With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel work (second coat) |
375 | Painting with synthetic enamel paint of approved brand & manufacture to give an even shade.Two or more coats on new work |
376 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
377 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete. On steel work |
378 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete. On concrete work |
379 | Wall Painting with acrylic emulsion paint of approved brand & manufacture to give an even shade. Two or more coats on new work |
380 | Relocation of 500/600/700 dia C.I pipes from water treatment plant nishat to site of work includingand hire charges of hydra for sorting ,stacking and loading and unloading of pipe lengths , complete job . |
381 | upto 5 km |
382 | upto 10 km |
383 | upto 15 km |
384 | Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) : Footpath |
385 | Providing & fixing of lighting & heating points including cutting of walls & making good the same after connecting of PVC tubes of 25mm dia of reputed & standard make for providing conduit to carry insulated copper wire of 1.5mm,2mm & 5mm(ISI/reputed make) for lighting/heating/fan points respectively as required.The job includes cost of all fittings & fixtures, insulated wire,holders, switches,dimmers for fan points & MCBs (ISI/reputed make) of required capacity,main switch board, hylum/PVC sheets all complete & including providing & fixing of 9-11 Watt LED lights.The job is to be carried out as per the directions of site in-charge. |
386 | Lighting points. |
387 | Heating points. |
388 | Fan points including fan of 120 cm dia (Havells make). |
389 | Providing & fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2mm dia wire or nuts, bolts and washers as required complete as per the direction of Eng.-incharge. Made of G.I. wire of dia 4 mm |
390 | Providing and laying gang saw cut of specified thickness, mirror polished pre-moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge.30 mm thick |
391 | Providing & fixing water closet squatting pan( Indian type W.C. pan) with 100mm sand cast Iron P or S trap,10 liter low level P.V.C flushing cistern (of approved make) manually controlled device (handle lever) conforming to IS:7231, with all fitting & fixtures complete, incl. cutting & making good the walls & floor wherever required. Long pan pattern white vitreous china W.C. Pan of size 580 mm. |
392 | Providing & fixing white vitreous china pedestal type water closet (European type) with seat and lid, C.P brass hinges & rubber buffers, 10 litre low level vitreous china flushing cistern with fittings, C.I/M.S. brackets, 40mm dia flush bend, overflow arrangement with specials of standard make & mosquito proof coupling of approved municipal design complete including painting of fittings & brackets, cutting & making good the walls & floors whatever required. (W.C pan with ISI marked white solid plastic seat & lid with white vitreous china flushing cistern & C.P flush bend.). |
393 | Providing/ fixing wash basin with C.I/M.S brackets 15mm C.P brass pillar taps, Kingston/ Gem/ Techno/ Parko/ Jagnar/ Escko, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting & making good the walls wherever require (White Vitreous China). Wash basin size 630 x 450mm with a pair of 15mm C.P brass pillar taps. |
394 | Providing & fixing of Salem stainless steel ISI:304 (18/8)kitchen sink as per I.S 13983 with CI brackets & stainless steel plug 40mmincl. painting of fittings and brackets, cutting and making good the walls wherever required: 510x1040 mm bowl depth 178 mm. |
395 | Providing and fixing of PVC pipe and pipe fittings of ISI mark & standard quality including bends, door junction etc. for drainage of water closet and kitchen water to the disposal including earth excavation and all sorts of carriages complete. |
396 | 100mm dia PVC pipe |
397 | 50mm dia PVC pipe |
398 | Providing and fixing of chromium plate S.S. bathroom/kitchen pipe fitting including all accessories of ISI marked and of standard make all complete. (Jagaur, Grohe , etc make as approved by engineer in charge) |
399 | basin mixer including all fittings required (inflow+outflow) |
400 | wall mixer /tap/shower headassembly inclduing all fittings(inflow+outflow) |
401 | kitcehn sink mixer including all fitings (inflow+outflow) |
402 | Providing /laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% & conforming to IS:15622 of approved make in all colours & shades, laid on 20mm thick cement mortar 1:4 (1 cement:4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. (Size of tile 60x60cm). |
403 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in walls, skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
404 | Providing and fixing of specified wooden frame work consisting of battens of size 50 x 25mm by using budloo wood duly fixed on walls by nails/rawl plugs. The job includes all leads & lifts, scaffolding charges,T&P & all sorts of carriages involved and is to be carried out as per the direction of site in-charge. Complete.Kiln seasoned & chemically treated hollock wood |
405 | Providing and fixing of imported wooden paneling of size 100mm x 10mm including screws, finished with polishing but excluding frame work. All complete. |
406 | Providing & fixing of Dura shine green coloured G.I corrugated sheets 0.45mm thick to be fixed with truss by hooks/bolts with matching colour tops incl. all sorts of carriages involved.All complete(Shingled sheets - design to be approved by Eng. incharge) |
407 | Providing ridges or hips of width 60cm overall width plain G.S sheets (coloured) fixed with polymer coated J or L hooks, bolts and nuts 8mm dia G.I limpet and bitumen washers complete. (0.63mm thick green coloured) |
408 | Providing and fixing plained eaves boarding.(300x40 mm (nominal size) Kail Wood |
409 | Providing & fixing of GS coloured panel type sheets as soffit (Chajja).The job includes cost of nuts,bolts,washers,scaffolding charges, handling charges & all sorts of carriages up to the site of work.The job is to be carried out under the supervision of site in-charge. |
410 | P & F 12mm thick specified board medium density exterior grade(Grade I) to frame,backing or studding with screws etc complete (Frames,backing or studding to be paid separately):Flat pressed 3 layer particle board or graded wood particle board IS:3087 |
411 | Providing and fixing wooden moulded corner beading of size 50x50mm (base and height) of triangular shape to the junction of paneling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete. (Second class kail wood) |
412 | Flooring wooden planking,tongued & grooved in flooring including fixing with iron screws complete. 25mm thick second class deodar wood. |
413 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave holdfasts etc. complete & stacking within 50 mtrs lead: of all sizes (of area beyound 3 sqm) |
414 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (holed fast lugs or with dash fasteners shall be paid for separately). (Second class Kail wood). |
415 | Providing and fixing 35mm thick panelled & glazed shutters for doors, windows & clerestory windows incl. ISI marked M.S Butt hinges bright finished of required size withnecessary screws excluding panelling which will be paid for separately, all complete as per direction of engineer-in charge.(Second class Kail wood). |
416 | 6mm cement plaster to ceiling of mix 1:3 (1 cement : 3 fine sand) |
417 | CEMENT PLASTER (IN FINE SAND) 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) |
418 | Providing and applying plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smoothcomplete. |
419 | Brickwork with common burnt clay FPS (non-modular) bricks of class designation 75 in foundation & plinth in: Cement mortar 1:6 ( 1 cement: 6 fine sand). |
420 | Extra for Brick work in super structure above plinth level up to floor v level (by manual means) |
421 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (holed fast lugs or with dash fasteners shall be paid for separately). (Kiln seasoned & chemically treated hollock wood). |
422 | Providing & fixing 35mm thick panelled or panelled and glazed shutters for doors, windows & clerestory windows including ISI marked M.S pressed Butt hinges bright finished of required size with necessary screws excluding paneling which will be paid for separately, all complete as per direction of engineer in-charge. (Kiln seasoned & chemically treated hollock wood). |
423 | Providing & fixing panelling or paneling and glazing in paneled or paneled & glazed shutters for doors, windows & clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25mm to 40mm thick. (Kiln seasoned & chemically treated hollock wood). |
424 | Providing 40x5mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolts, nuts & wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement: 3coarse sand:6 graded stone aggregate 20mm nominal size) |
425 | Providing and fixing 35mm thick wire gauze shutters using galvanized M.S wire gauze of average width for aperture 1.4mm in both directions with wire of dia 0.63 mm for doors, windows and clerestory windows. ISI marked M.S pressed but hinges bright finished butt hinges of required size with necessary screws. (Kiln seasoned & chemically treated hollock wood). |
426 | Providing and fixing of nickel Plated M.S. pipe curtain rods with nickel plated brackets.25mm dia (Heavy type) |
427 | Providing & fixing ISI marked Oxidized M.S sliding door bolts with nuts and screw etc. complete. 250 X 16mm |
428 | Providing & fixing Aluminium tower bolt ISI marked anodized with necessary screws etc. Complete. |
429 | (150x10mm) |
430 | (100x10mm) |
431 | Providing & fixing Aluminium handles ISImarked anodized confirming to IS:1868with necessary screws etc. Complete. |
432 | (125 mm) |
433 | (100 mm) |
434 | Dismantling wood work in frames,trusses,purlins & rafters upto 10meters span and 5 meters height including stacking the material within 50meters lead : |
435 | Of sectional area 40 sqcm. and above. |
436 | Of sectional area below 40 sqcm |
437 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. |
438 | For thickness of tiles 10 mm to 25 mm |
439 | Dismantling Granite /marble work in floorsin cement mortar including stacking material within 50 meters lead. |
440 | For thickness of tiles 10 mm to 25 mm |
441 | For thickness of tiles above 25 mm and upto 40 mm |
442 | Dismantling roofing including ridges, hips valleys & gutters etc. and stacking the material within 50 meters lead of : |
443 | G.S. Sheet |
444 | Dismantling of flushing cistern of all types(C.I/PVC/Vitreous china) including stacking of useful materials near the site and disposal of unserviceable materials within 50 meters lead |
445 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. |
446 | Demolishing brick work manually/by mechanical means including Staking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: |
447 | In cement mortar |
448 | Providing and fixing of Aluminium work for doors and partitions with extruded built up standard tabular section/appropriate z-sections and other section of approved make confirming to IS-733 & IS-1285, fixed with dashfastener of required dia and size including necessary filling up to gaps at junctions i.e at top, bottom and sides with required EPDM rubber/neoprene gasket felt etc. Aluminium section shall be smooth, rust free, straight, mitered & jointed mechanically wherever required included cleat angle, Aluminium snap beading for glazing/paneling, C.P brass/stainless steel screws, all complete as per architectural drawings and the direction of Engineer In charge. (glazing, paneling and dash fasteners to be paid for separately) Anodized Almunium for fixed portion. (anodized transparent or dyed to required shade according to IS:1868 minimum anodic coating of Grade AC 15) (For shutters including providing and fixing of hinges/pivots & making provisions for fixing of fittings wherever required), including cost of EPDM rubber/neoprene gasket required (Fittings shall be paid separately). The item also includes providing/ fixing of glazing in shutters with floating glass panes of 8mm thickness and with Anodized Alumuniumsheet 2.5mm thick where ever requiredas per requirement at site and is be to be carried out as per the directions of Engineer in-charge. (All complete) |
449 | Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : |
450 | 12 mm dia. |
451 | 20 mm dia. |
452 | 25 mm dia. |
453 | P/F of 12 mm thick prelaminated particle board fixed in aluminum panels for doors, windows etc |
454 | Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, including aluminium angle cleats with necessary C.P. brass/ stainlesss teel sunk screws, aluminium perimeter angles fixed to wall withstainless steel rawl plugs @ 450 mm centre to centre and fixing theframe work to G.I. level adjusting hangers 6 mm dia. with necessarycadmium plated machine screws all complete as per approvedarchitectural drawings and direction of the Eng.-in-charge (leveladjusting hangers, ceiling cleats & expansion hold fasteners to be paid for separately). |
455 | Hire charges for welding (gas or electric) including carriage of man and machinery , tools , genset etc required at site |
456 | welding charges upto 2 hours of work |
457 | welding charges upto 4 hours of work |
458 | welding charges upto 6 hours of work |
459 | welding charges upto 8 hours of work |
460 | welding charges upto 12 hours of work |
461 | welding charges during night hours 10pm to 6 am |
462 | Laying in position S & S or flanged C.I. special such as tees, bends,collars, tapers and caps etc. (excluding cost of specials) |
463 | Providing and laying S&S C.I. standard specials such as tees, bends,collars, tapers, caps etc (Heavy class) |
464 | Up to 300 mm dia. |
465 | Over 300 mm dia. |
466 | Providing and laying flanged C.I. standard specials such as tees, bends, collars, tapers, caps etc ., suitable for flanged jointing as per IS : 1538 |
467 | Up to 300 mm dia. |
468 | Over 300 mm dia. |
469 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.) |
470 | With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm) |
471 | With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm) |
472 | With float glass panes of 8 mm thickness (weight not less than 20.0 kg / sqm) |
473 | Manufacturing supplying & fixing retro reflective sign boards made upof 2mm thick aluminum sheet, face to be fully covered with high intensityencapsulated type heat activated retro reflective sheeting conforming totype-IV of ASTM-D-4956-01 in blue and silver white or other colourcombination including subject matter,message (bi-lingual),symbols andborders etc. as per IRC : 67-2001,pasted on substrate by an adhesivebacking which shall be activated by applying heat & pressureconforming to class -2 of ASTM-D-4956-01 & fixing the same withsuitable sized aluminum alloy rivets @ 20cm c/c to back support frame of MS angle iron of size 25x25x3mm along with theft resistant measuresmounted & fixed with 2 Nos. MS angles of size 35x35x5mm to avertical post made upto MS Tee section ISMT 50x50x6mm welded withbase plate of size 100x100x5mm at the bottom end & incld. making holes in pipes,angle flats , providing & fixing MS message plate of required size steel work to be painted with two or more coats of syntheticenamel paint of required shade and of approved brand & manufacture overpriming coat of zinc chromate yellow primer (vertical MS-Tee support tobe painted in black & white colours)Backside of aluminum sheet to bepainted with two or more coats of epoxy paint over & incl. appropriate priming coats including all leads & lifts etc. complete as perdrawing, specification & direction of Eng.-in-charge. |
474 | Mandatory/Regulatory sign boards of 900 mm diameter withpart as length of 3750 mm. |
475 | Cautionary/warning sign boards of equilateral triangular shapehaving each side of 900 mm support length of 3650mm. |
476 | Manufacturing supplying and fixing retro reflective overhead signageboards made up of 2mm thick aluminum sheet, face to be fully coveredwith high intensity and encapsulated lens type heat activated retroreflective sheeting conforming to type-III of ASTM-D-4956-01 asapproved by Engineer-in-charge; letters, borders etc. as per IRC : 67-2001in silver white with blue colour background and with high intensity grade,pasted on substrate by pressure sensitive adhesive backing which shall beactivated by applying pressure conforming to class -II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means ofsuitable sized aluminum alloys, rivets or bolts and nuts @ 300mm c/c allalong the periphery as well as in two vertical rows along with theftresistant measures including the cost of painting with two or more coats ofepoxy paint in grey colour on the back side of aluminum sheet includingappropriate priming coat. The rate includes the cost of rounding off thecorners, lowering down the structural frame work from the gantry, fixingand erecting the same in position all complete as per drawing,specification and direction of Engineer-in-charge (Structural frame workincluding M.S. plate to be provided separately. Rectangular area of thesheet only shall be measured for payment). |
477 | Providing Retro-reflective regulatory sign board of size 900mm diametermade out of 2mm thick aluminum sheet, face to be fully covered with highintensity encapsulated lens type retro-reflective sheeting as approved byEngineer-in-charge. Letter, symbols, borders, etc. will be as per IRC:67with required colour scheme on the boards and with the high intensitygrade A. the aluminum sheet to be riveted to M.S. frame of angle iron ofsize 40x40x4mm. The boards will be fixed to 1 No. 50x50mm square postmade of M.S. angle 50x50x4mm, 4m long welded to the frame withadequate anti-theft arrangement. Sheet work to be painted with two ormore coats of synthetic enamel paint over an under coat (primer) and backside of aluminum sheet to be painted with two or more coats of epoxypaint including appropriate priming coat complete in all respects as perdirections of Engineer-in-charge. |
478 | Replacement of PS 180 / 12V 180Ah Double battery ofapproved and compatable brandfor 160KVA{model CS160D5P} genset including all carriages, fixtures , skilled workmen and tools required. The job includes all jobs to make the new battery and thus the genset functional ( inclduing change of m oil , filter, coolant etc ) and is only to be taken up with the output being the genset in working condition . Item cannot be paid separately if it fails to make the genset functional. |
479 | Removal of unhygienic materials (so classified by the site engineer) from designated sites and its disposal as per directions, all inclusive. |
480 | Filling empty cement bags with sand/ earth; including cost of sewing and strings; excluding cost of bags and earth / sand. |
481 | Supply ofEmpty Cement Bags including all carriages |
482 | Flex Printing charts of required size and colour including printing of logos, drawings site plans etc. |
483 | Standees of steel frame or any other suitable material with Flex Printing chartsof required size and colour including printing of logos, drawings site plans etc. |
484 | Printing of lanyards of suitable size and design |
485 | Auto Cadd drafting of Drawings |
486 | A3 |
487 | A0 |
488 | A3 colour printing of Auto CaddDrawings |
489 | A0 colour printing of Auto CaddDrawings |
490 | A3 B/W printing of Auto CaddDrawings |
491 | A4 Spiral Binding upto 50 pages |
492 | A4 Spiral Binding50 upto 100 pages |
493 | A4 Spiral Binding more than 200 pages |
494 | A3 Spiral Binding of Drawings |
495 | Hire and running charges of Tipper |
496 | Hydraulic excavator JCB |
497 | Hydraulic excavator with drill |
498 | Hydraulic excavator(Pokelain) |
499 | Hydra of any Weight capacity and boom length |
500 | Providing, laying & filling of materials in trenches, road cut or wherever required including consolidation, by ramming or other means etc. complete job |
501 | Sand |
502 | Nallah Muck |
503 | StoneDust |
504 | WBM grade IInd 63mm to 45mm |
505 | Hire Charges of Generator of required capacity as per site requirement for carrying welding operations etc. including all carriages, head load complete job |
506 | Operational Charges of Generator including cost of Fuel, workmen etc. all complete |
507 | Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 meters. |
508 | Upto 150 mm diameter. |
509 | Above 150 mm diameter. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail