Military Engineer Services-MES has published Tender For Repair To Sewage Line, Drain, Joinery, Plumbing , Tiling, Hardstanding Certain B/R Works At Dm Range Under Ge (Af) Tezpur. Submission Date for this Tender is 11-05-2024. Drainage Tenders in tezpur Assam. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 30-Apr-2024 | OTHER CORRIGENDUM | Other | 11-05-2024 |
| FileName | File Description | File Size |
| 7920fa30-3f3b-4b19-b6b0-77e765325b7d.html | Tender Notice | 0 KB |
| BOQ_729197.xls | Tender Document | 0 KB |
| TENDER.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frame with shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each, complete all as directed. |
| 2 | Taking down chowkhats or frame with shutters (without taking off shutters from the frame) exc. 1.5 Sqm but not exc. 4.0 Sqm each, complete all as directed. |
| 3 | Dismantling posts or struts (wood, steel or RCC) of any section, embedded in concrete, masonry, brick work etc. including taking out embedded portion and making good disturbed ground complete all as directed. |
| 4 | Dismantling barbed wire, galvanised, 2 strand, 2.00mm dia barbed at 75mm spacing complete all as directed. |
| 5 | Dismantling fencing wire mesh, any type complete all as directed. |
| 6 | Materials and labour for, plain cement concrete (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in surface channels and drainsincluding demolition of unreiforced cement concrete in ground floors and pavings not exc 15cm thickness (below or above ground level), complete all as specified and directed. |
| 7 | Materials and labour for, plain cement concrete (1:2:4) type B0 (using 12.5mm graded crushed stone aggregate) as in copings, benching to manholes, water troughs and the like including weathering, slightly rounded or chamfered angles, throating with necessary formwork including demolition of unreiforced cement concrete in ground floors and pavings not exc 15cm thickness (below or above ground level), complete all as specified and directed. |
| 8 | Materials and labour for, plain cement concrete (1:2:4) type B0 (using 12.5mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating with necessary formwork, complete all as specified and directed. |
| 9 | Material and labour for, 100mm thick plain cement concrete (1:4:8) type D2 (using 40mm graded crushed stone aggregate) as in paving/ hardstanding etc. including demolition of cement concrete (unreiforced) in ground floors and pavings not exc 15cm thickness (below or above ground level)complete all as specified and directed. |
| 10 | Materials and labour for brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar (1:6) including demolition of brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles and depositing off the rubbish materials where directed, complete all as specified and directed. |
| 11 | Materials and labour for brickwork with sub class ‘B’ bricks, old size, straight or curved on plan to any radius inhalf brick thick walls built in cement mortar (1:4), including demolition of brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles and depositing off the rubbish materials where directed, complete all as specified and directed. |
| 12 | Material and labour for, boulder filling dry, hand packed tightly, as in wire crate apron bunds (wire crate measured separately), complete all as specified and directed. |
| 13 | Materials and labour for, 2nd class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered,put together with glue pinned at joints, complete all as specified and directed. |
| 14 | Material and labour for 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); complete all as specified and directed. |
| 15 | Supply and Fix, 30 mm thick, 2nd class hardwood, glazed skeleton shutters, open rebated and prepared to receive glass, gauze etc. (with sash bars) divided into squares with plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc; sizes of members of windows, ventilators provided with stiles and rails as specified in SSR Part I Section 8, clause 8.24(b) and fitted to chowkhats, complete all as specified and directed. |
| 16 | Material and labour for 35mm thick 2nd class hard wood, factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 17 | Supply and fix for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 18 | Supply and fix for, factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 19 | Supply and fix for, medium weight, cold rolled mild steel butt hinges,100 mm size,complete all as specified and directed |
| 20 | Supply and fix for, medium weight, cold rolled mild steel butt hinges, 75mm size, complete all as specified and directed |
| 21 | Supply and fix for, aluminium anodized barrel tower bolts of extruded section, 200mm long complete all as specified and directed. |
| 22 | Supply and fix for, aluminium anodized barrel tower bolts of extruded section, 100 mm long complete all as specified and directed. |
| 23 | Supply and fix for, aluminium handles, cast type, anodised 150 mm size, complete all as specified and directed. |
| 24 | Supply and fix for, aluminium handles, cast type, anodised 100 mm size, complete all as specified and directed. |
| 25 | Supply and fix for, aluminium alloy, anodised, sliding door bolt, length of bolt 300 mm,with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed. |
| 26 | Supply and fix for, 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete, complete all as specified and directed. |
| 27 | Supply and fix in repairs, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed. |
| 28 | Supply and fix in repairs for, aluminium anodised curtain rod 20mm dia with bracket, stops, rollers etc., complete all as specified and directed. |
| 29 | Supply and fix in repairs for, aluminium tubular towel rail, 20mm dia, D type, 60cm long between flanges including brackets, complete all as specified and directed. |
| 30 | Supply and fix in repairs for, double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 31 | Supply and fix in repars for, door closer (extruded section) hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed. |
| 32 | Supply only barbed wire, galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm specings, comlete all as specified and as directed. |
| 33 | Fixing only galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including securingor tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc., complete all lete all specified. Note: (i) Each line wire will be measured. (ii) Supply of barbed wire and steel will be measured and paid seperately under relevant item. |
| 34 | Supply only chain link MS galvanised fencing, any size or type, complete all as specified. |
| 35 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire, complete all as specified. Note: Supply of chain link fencing and wire will be measured and paid seperately under relevant item. |
| 36 | Supply and fix for mild steel round bars Gde-I, IS 432 (Part-I), 10mm dia, cut to length, bend to shape required including cranking, bending, hooking ends and securing to fencing post as in stiffners to GI chain link fencing complete all as specified and directed. |
| 37 | Supply and fix for mild steel work such as bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 including necessary welding, bending cold or hot, drilling holes for bolts in anyshape or size complete all as specified and directed. |
| 38 | Supply and fix for, framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 39 | Supply and fix for, rolled mild steel joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming to Fe-290, Grade E-165 complete all as specified and directed. |
| 40 | Material and labour for, black hollow steel sections for structural work, conforming to IS-4923:1997 (Reaffirmed 2009), designation CF, as in roof trusses, purlins, posts, crane gantries, rails and fastening and heavy brackets framing (Square or rectangular hollow section) including distance pieces, cleats etc. including dismantling of existing old unserviceable section, complete all as specified and directed. |
| 41 | Material and labour for rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-290, Grade E-165 complete all as specified and directed. |
| 42 | Supply and fix for, 4mm dia galvanised steel wire, 225x150mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling, complete all as specified and directed. |
| 43 | Supply and fix for, mild steel bolts purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut dia of neck exc.12mm but not exc.20mm length of bolt exc.30cm long, complete all as specified and directed. |
| 44 | Supply and fix in repairs for, powder coated aluminium door frame and shutter single leaf panelled door partly glazed with 5mm thickglass and partly 6mm thick prelaminated board door shutter divided into two panels fabricated including powder coated aluminium snap beading and rubber gasket/ lining for fixing of glass and prelaminated board panel. The door frame shall be fixed aluminium anodised bolt by drilling in the existing wall and with thrust bolt of suitable size. The door frame and shutter shall be comprising of the following section and fitting including taking down of existing shutter with frame and fittings complete all as specified and directed:- (a) Aluminium door frame section 101.6x44.5x1.27mm (b) Aluminium styles of shutter section 85x44.5x1.56mm (c) Aluminium top & bottom rail of shutter section 101.6x44.5x2.5mm (d) Aluminium middle/ lock rail of shutter section 100x44.45x2mm (e) Aluminium handle 250mm long 02 Nos in each shutter (f) Aluminium tower bolt 200mm long as required as per normal (g) Six lever mortice lock brass (h) 03 Nos aluminium butt hinges 100mm long (j) 06mm thick pre-laminated board (k) 5.0mm thick tinted glass (Note: In case of two leaf each leaf will be measured seperately) |
| 45 | Supply and fix for, powder coated (minimum thickness of powder coating 50 micron) aluminium three track window and ventilator frame with powder coated (minimum thickness of powder coating 50 micron) aluminium sliding glazed shutters, without sash bars, including necessary jointing cleats, glazing clips, rubber packing, powder coated (minimum thickness of powder coating 50 micron) aluminium snap beading, locking arrangements, handle screws etc. including 4mm tinted glass and taking down of existing shutter with framecomplete all as specified and directed. |
| 46 | Supply and fix for, powder coated (minimum thickness of powder coating 50 micron) aluminium two track window, sliding type shutter, sliding on two way aluminium channel, without sash bars, sliding on separate track made out of aluminium section weighing not less than 0.55 Kg/Rm and necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, fittings such as suitable anodised aluminium locking type handle etc. and fixing of 4.00 mm thick tinted glass, including taking down existing shutter with frame and fittings, complete all as specified and directed. |
| 47 | Material and labour for, pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws including dismantling of asbestos roof sheet (corrugated, semicorrugated, etc.), complete all as specified and directed. |
| 48 | Material and labour for,pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, including dismantling of asbestos roof sheet (corrugated, semicorrugated, etc.), complete all as specified and directed. |
| 49 | Materials and labour for, anodised aluminium snap grid frame work for false ceiling, size of grid 605 mm x 605 mm as per clause 10.38 of SSR Part-I (2009) including 4mm thick, high pressure steam cured (HPSC) non asbestos fibre cement building boards fixed or laid to aluminium framework with screwsincluding dismantling existing wall and ceiling boards (fibre, pulp, insulation,etc.) or insulation boards/ slabs/blankets,any thickness,complete all as specified and directed. |
| 50 | Materials and labour for, glazed ceramic coloured tiles, 450 X 300 X 7mm thick, conforming toIS 15622,Grade B III, on vertical surface of wall such as dados, skirting etc, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick screed bed or bedding layer of cement mortar (1:3) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing),removing serviceable tiles and rubbish off the premises,complete all as specified and directed. |
| 51 | Materials and labour for, non - skid Ceramic tiles, coloured,7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,conforming to IS 15622, Grade B IIa,in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20mm thick screed bed or bedding layer of cement mortar (1:6) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises,complete all as specified and directed. |
| 52 | Material and labour for chequered cement concrete tiles with grey cement and pigment, 20cm X 20cm X 25mm thick, machine pressed, set jointed and pointed in neat cement slurry in floors and cut and polished over and including 20mm thick screed bed or bedding layer in CM (1:6), including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed. |
| 53 | Material and labour for sand cushioning under interlocking tiles, complete all as specified and directed. |
| 54 | Supply and laying for, machine pressed precast concrete interlocking paver block,with grey cement and pigment,any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade,complete all as specified and directed. |
| 55 | Materials and labour for rendering 15 mm thick, cement plaster, in cement mortar (1:6) on fair faces of brick work or concrete surface in walls and finished even and smooth without using extra cement, complete all as specified and directed. |
| 56 | Materials and labour for, rendering 5 mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 10mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface in walls, complete all as specified and directed. Note:-Water proofing compound will be measured and paid seperately. |
| 57 | Materials and labour for, rendering 5 mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 10mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface in walls, including taking down cement plaster from brick or concrete surfaces of any description including racking out joints,hacking for key,scrubbing down with water etc., complete all as specified and directed. Note:-Water proofing compound will be measured and paid seperately. |
| 58 | Supply only liquid water proofing compound all as specified. |
| 59 | Material and labour for preparation of old decorated plastered or unplastered surfaces and applying one coat of white wash on wall, complete all as specified and directed. |
| 60 | Material and labour for washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of distemper oil emulsion,on walls, complete all as specified and directed. |
| 61 | Material and labour for, preparation ofnew plastered or unplastered surfaces and applying two coats of oil bound distemper over a coat of cement primer over 1mm thick wall care putty complete all as specified and directed. |
| 62 | Materials and Labour for, 3 mm thick,sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads,complete all as specified and directed. |
| 63 | Material and labour for, preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer complete all as specified and directed. |
| 64 | Material and labour for, preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (ordinary tint) complete all as specified and directed. |
| 65 | Material and labour for preparation of new steel or iron surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide zinc chrome primer, complete all as specified and directed. |
| 66 | Material and labour for, preparation of old painted steel or iron surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint (ordinary tint) complete all as specified and directed. |
| 67 | Material and labour for, preparation of old painted steel or iron surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint dark green colour or as approved on building, complete all as specified and directed. |
| 68 | Material and labour for, preparation of old painted steel or iron surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of aluminium paint, complete all as specified and directed. |
| 69 | Material and labour for, preparation of newly plastered wall surfaces and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/ litre and UV resistance as per IS 15489-2004, alkali and fungal resistance, dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @0.90 litre/ 10 sqm on walls in camouflage pattern, in any shade or colour, complete all as specified and as directed. Note: (i) Painting shall be done in camouflage pattern as per existing shade(s) and pattern(s). (ii) The contractor shall furnish guarantee for the exterior acrylic emulsion paintand shall be responsible for effectiveness of the UV resistance, alkali and fungal resistance and dirt resistance of the painted areas during the guarantee period. |
| 70 | Material and labour for, washing, rubbing down and stopping of old painted surfaces and applying one coat of 100% premium acrylic emulsion paint having VOC less than 50gm/ litre and UV resistance as per IS 15489-2004 Alkali and fungal resistance, dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives @ 1.43 litre/ 10Sqm on walls complete all as specified and as directed. Note: (i) The contractor shall furnish guarantee for the exterior acrylic emulsion paintand shall be responsible for effectiveness of the UV resistance, alkali and fungal resistance and dirt resistance of the painted areas during the guarantee period. |
| 71 | Materials and labour for galvanized steel tubing, medium grade, 15mm bore with all fittings and fixed complete to walls and ceiling or laid in floor including taking up or down, steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 72 | Materials and labour for galvanized steel tubing, medium grade, 20mm bore with all fittings and fixed complete to walls and ceiling or laid in floor including taking up or down, steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 73 | Supply and fix in repairs for, vitreous china urinals, half stall (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe), complete all as specified and directed. |
| 74 | Supply and fix in repairs for, vitreous China wash basin, white, flat back, size 550mm X 400mm excluding taps, waste chain and porcelain stopper, but including brackets, cutting for and pinning in ends of brackets or erecting stand, complete all as specified and directed. |
| 75 | Supply and fix in repairs for, bib tap, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule, 15 mm bore and fixed, complete all as specified and directed. |
| 76 | Supply and fix in repairs for, pillar taps, cast copper alloy, with capstan heads, fency type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe, 15 mm bore, complete all as specified and directed. |
| 77 | Supply and fix in repairs for, 15mm bore, stop valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed. |
| 78 | Supply and fix fix for, 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down old pipe with all fittings, complete all as specified and directed. |
| 79 | Supply and fix for, 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down old pipe with all fittings, complete all as specified and directed. |
| 80 | Supply and fix for, 75 mm bore PVC (SWR) bends any radius, complete all as specified and directed. |
| 81 | Supply and fix for, 110 mm bore PVC (SWR) bends any radius, complete all as specified and directed. |
| 82 | Supply and fix in repairs for, health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect andspecified. |
| 83 | Supply and fix in repairs for, PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and directed. |
| 84 | Supply and fix in repairs for, PVC valve less, syphonic action type, flushing cistern, low level,white, with inlet, ball valve, float and handle, of capacity 10 litres, including brackets, flush pipe, complete all as specified and directed. |
| 85 | Supply and fix in repairs for, vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device,complete all as specified and directed. |
| 86 | Supply and fix in repairs for, 600 mm X 450 mm bevelled edge mirror of selected quality glass 5mm thick mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 87 | Material and labour for, 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part – I , including ball valves high pressure of PTMT (Minimum weight210gms) with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe, 20 mm bore and fixed and including dismantling existing water tanks of capacity exceeding 250 Litres but not exceeding 500 Litres and removing to store, complete all as specified and directed. |
| 88 | Material and labour for, 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part – I , including ball valves high pressure of PTMT (Minimum weight210gms) with epoxy coated Aauminium rod & high density plastic ball screwed for iron pipe, 20 mm bore and fixed and including dismantling existing water tanks of capacity exceeding 500 Litres but not exceeding 1000 Litres and removing to store, complete all as specified and directed. |
| 89 | Supply and fix in repairs for, PVC water tank cover suitablefor 250 to 1000 litres capacity with necessary fixing arrangement complete all as specified and directed. |
| 90 | Disconnecting existing tanks exc.250 litres but not exc.500 litres capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position (Cleaning repairing, etc. measured separately), complete all as directed. |
| 91 | Disconnecting existing tanks exc.500 litres but not exc.1000 litres capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position (Cleaning repairing, etc. measured separately), complete all as directed. |
| 92 | Supply and fix in repairs for, ball valves high pressure of PTMT (Minimum weight210gms) with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe, 20 mm bore and fixed, complete all as specified and directed. |
| 93 | Supply and fix in repairs for, vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with "P" trap including provision of PCC or lime concrete bedding and removal of debris complete all as specified and directed. |
| 94 | Supply and fix in repairs for, stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including bedding in cement mortar on to dwarf wall or fixing cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm, complete all as specified and directed. |
| 95 | Supply and fix in repairs for, brass chromium plated shower rose with or without swivel joints, 125mm size with shower arm 225mm long with flange including fixing to steel pipe or union, complete all as specified and directed. |
| 96 | Taking out sludge and sullage from septic tank/ sewage pump/ manholes etc. and removing the same to a distance not exc.50m away from starting point and depositing in excavated pits not exceeding 10sqm on plan and not exc.1.5m in depth when the deposited sludge in pit is dry in solid form then measured and covered by ordinary soil to thickness not less than 30cm from existing ground level including sprinkling of bleaching powder over the area of trenches and on the cleared septic tank and making the sewage line functional after cleaning complete all as directed. Note: Solid deposits will be taken for measurement purpose after cleaning. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
