Military Engineer Services-MES has published Tender For Special Repair To Internal Roads Of Age B/R-I Under Ge (East) Lucknow. Submission Date for this Tender is 18-05-2024. Road Work Tenders in lucknow Uttar Pradesh. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| caa3d16c-ee79-4331-a463-984cf105141b.html | Tender Notice | 0 KB |
| BOQ_729145.xls | Tender Document | 0 KB |
| TenderET03.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | M&L for Repairs to pot holes exc 30mm depth, n.exc 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in road, path etc cutting around edges to at least 25 mm in depthmaking good by applying tack coat @ 5 kg per 10 sq m, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed(including supply of premixed macadam, binder and chippings)complete all as specified and directed by Engineer in Charge. |
| 2 | Preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and directed by Engr-in-Charge. |
| 3 | M&L for applying evenly apriming / tack coat with paving bituminous primer VG-10 grade@ 5 Kg per 10 Sqm over old black top surfaces. |
| 4 | M&L for bituminious premix semi-dense asphaltic concrete 30 mm (consolidated thickness) using paving bitumen of grade VG-30 with 5.5% binder content by weight of total mix, mixed in Computerised Hot Mix Plant and spread by means of Self Propelled Mechanical Paver, rolled and compacted to required camber and gradient by using mechanical power road roller of 8 to 10 tonne capacity complete all as specified and directed. Note : (i) The mix design shall be got done from approved lab and got approved from GEbefore commencement of work. (ii) In the event of variation in the mix design in the percentage of binder content on minus side, the difference in quantity of binder content will be adjusted through supply only rate of Rs 41.13 per Kg of grade VG-30bitumen. However no adjustment shall be applicable if excess quantity of binder content is used/approved in the execution of work under this item. (The quantity of 5.5% mentioned is exclusive of any wastage and no wastage shall be taken into account for the purpose of above adjustment) |
| 5 | M&L premixed bituminous macadam over primed surface of road using paving bitumen VG-30, laid/rolled by 8 to 12 tonne capacity roller and compacted to required gradient and camber (consolidated thickness 75 mm or less), binder contents of premixed macadam shall be 4% by weight of total mix (Design Mix), complete all as specified and directed. |
| 6 | Preparation of road surfaces and applying thermoplastic reflective paint in marking of minimum 2.50 mm thick single coat as in centre line and edge line road marking of 150/100 mm width using "HOT MARK" thermoplastic paint (Hot application) white/yellow by indigenous modern propelled road marking machine as directed including all ingredients such as blinder, glass beads Titanium dioxide calcium carbonate inter fillers for achieving reflection on roads,pavementsand the like. Themoplastic requirement for glass shall be as per table No 800.4 of MORTH specification including spraying of glass beads etc all as per manufacture instructions and as directed by Engr -in-charge. |
| 7 | Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of fixed with and incl MS stud of suitable size as per manufactures instructions. |
| 8 | S&F for solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed |
| 9 | S&F For Metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed. |
| 10 | S&F road safety convex mirror made up of polycarbonate reflective and body made of ABS/ Fiber/ Plastic of size 100 cm dia fixed cover & Including 40mm bore MS pipe of 2.4 meter length duly powder coated embdded in PCC 1:2:4 of Size 45 cm x 45 cm x 45cm and excavation earth work all as specified and directed by Engr-in-charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
