Public Works Department-PWD has published Tender For Arrangement Of Different Activities In Upcoming Lok Sabha Election 2024 (Stage Contract). Submission Date for this Tender is 04-05-2024. Event Management Tenders in kupwara Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Potholes Repair: Earth work in excavation by manual means in trenches for foundations, drains, pipes cables etc. (not exceeding 1.5m in width) and for shafts, wells, cesspits and the like not exceeding 10sqm on plan, including getting out excavated earth and disposal of surplus excavated earth as directed by site Engineer. All kinds of soil : 1 meter from cutting edge. |
| 2 | Earth work in excavation by mechanical means(Hydraulic Excavator) in trenches for foundations, drains, pipes, cables etc ( not exceeding 1.5m in width) and for shafts, wells, cesspits and the like not exceeding 10sqm on plan, including Id dressing of sides and ramming of bootom lift upto 1.5m, incl. getting out excavated earth and disposal of surplusearth as directed by site Engineer. All kinds of soil |
| 3 | Providing and laying of dry stone soling(hand packed) in foundation trenches and ramming, including all leads, lifts carriages complete. |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. Incl all carriage from source to site of work 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 6 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 7 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etcupto floor V level, including curing but excluding the cost of centring, shuttering and finishing with. 1:1½:3 (1 cement: 1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) |
| 8 | Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete. Incl all fittings , fixtures and carriages upto site of work complete: First Class Imported KD Wood |
| 9 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.l limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m- |
| 10 | Structural steel work in single section, fixed with or without connectingplate, including cutting, hoisting, fixing in position and applying a primingcoat of approved steel primer all complete. |
| 11 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat ofapproved steel primer all complete. 1. Welded |
| 12 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete |
| 13 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 14 | Engagement of Tractor with trolley |
| 15 | Engagement of JCB |
| 16 | Engagement of Tipper |
| 17 | Engagement of Sumo Vehicle |
| 18 | Engagement of Generatorminimum capacity of 2800 Watt incl providing of Diesel/Petrol. |
| 19 | Engagement of Labourersfor clearance as per directed by direction of Engineer -in-charge |
| 20 | Centering and shuttering including strutting, propping etc. and removal of form work for: 1 Foundations, footings, bases for columns |
| 21 | Centering and shuttering including strutting, propping etc. and removal of form work for: 1.Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs and steps etc. |
| 22 | Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms. |
| 23 | 12mm Cement plaster on the rough side of single or half brick wall of mix:1 : 4 ( 1 cement : 4 fine sand) |
| 24 | 15mm Cement plaster on the rough side of single or half brick wall ofmix: 1 : 4 ( 1 cement : 4 fine sand) |
| 25 | Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete |
| 26 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. 15 -20mm dia. nominal bore |
| 27 | Providing and fixing of following CP fittings of Approved brand and make incld all carriage complete. Long Body Bib cock 15 mm Nominal Bore. |
| 28 | Providing and fixing nominal bore , medium grade G.l.fittings ofclass-Bincldclamps,cutting and making good the walls with cost and carriageetc. complete.Union/Elbow/socket etc. |
| 29 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm nominal size stone aggregate. |
| 30 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z. sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions, at top, bottom and sides with required EPRM rubber/ neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge incld 5 mm thick glass panes(glazing, panelling and dash fasteners )For fixed portion/shutters of doors,windows and ventillators including providing and fixing hinges/pivots and all necessaryfittings wherever required.Powder coatedAlmunium(minimum thickness of powder coated of 50 microns) Jindal or equivalent make16 guage including all carriages. |
| 31 | Service Line:Providing and laying of service wires for Sevice line and lighting wire for Election Rooms etc 7/18 wire of standaerd quality |
| 32 | 2.5 mm wire of standadr quality. |
| 33 | 1.5 mm wire of standadr quality. |
| 34 | Electric Items:Providng/laying LED Lamps of 9 watt or etc as ISI specifications Haveels,Suraya,Anchorincld,holder,bed switch,wire clips, sockets and all other necessary items incld carriage. |
| 35 | Supply and fillingKhakbajree for Berm filling , with ramming dressing watering and consolidation by road roller,incl: cost and carriage of all materials from approved source to site of work (Finished work to be measured, complete) |
| 36 | Supply and filling of Nallah muck in 15Cm layers incl. watering dressing ramming and consolidation with PRR 8-10Ton capacity all inclusive of leads lifts loading unloading and carriage of material form source to site of work complete job. |
| 37 | Scarifying metalled (water-bound) road surface including disposal ofrubbish lead upto 50m and consolidation of the aggregate received from scarifying with power road roller of 8 to 10 tonne capacity |
| 38 | Supply and stacking of graded stone agg 63-45mm size(crushed/quarry)incl. Supply and stacking of stone screenings/chippings at site 13.20mmnominal size (Type –A) incl. Laying of WBM with specified stone agg. Stone screening and binding material incl. screening sorting spreading to template and consolidation with PRR8-10 tonne capacity etc. Incl. all carriages upto site of work by MT. |
| 39 | Scarifying the existing bituminous road surface to a depth of 50mm anddisposal of scarified material within all lifts and lead upto 1 km (by mechanical means). |
| 40 | Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge |
| 41 | Providing and applying tack coat using hot straight run bitumen of grade VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler,cleaning and preparing the existing road surface as per specification including all carriages complete. (on BT Surface) |
| 42 | Providing and applying tack coat using hot straight run bitumen of grade VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler,cleaning and preparing the existing road surface as per specification including all carriages complete. (on WBM Surface) |
| 43 | Providing and laying bituminous macadam using crushed stone aggregates of specified grading premised with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the requiredgrade, level and alignment and rolling with smooth wheeled , vibratory and tandem rollers as per specifications to achieve the desired compaction and density , complete as per specificationsand directions of Engineer-in charge 50 to 100mm average compacted thickness with bitumen of grade VG-10@3.50% (percentage by weight of total mix) prepared in Drum Type Hot Mix Plant of 60-90 TPH Capacity including all carriages complete |
| 44 | Providing and laying semidense bituminous concrete using crushed stoneaggregate of specified grading with bituminous binder and filler, transporting the hot mix to work site by tippers , laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled , vibratory and tandem rollers to achieve the desired compaction and density as per speciation , complete and as per directions of Engineer-in-charge including carriage complete |
| 45 | Providing and laying seal coat of premixed fine aggregate (Passing 2.36mm and retained on 180 micron sieve) with bitumen using 128Kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60cum of fine aggregate per 100sqm of road surface including rolling and finishing with road roller all complete including all carriages |
| 46 | Clearance of existing drain and choked pipes with removal of pipes & Mulba from road side disposal on the road by mechanically means etc complete asper direction of incharge Engineer |
| 47 | Providing and applying 2.5mm thick road marking strips (retro-reflective)of specified shade/colour using hot thermoplastic material by fully/semi automatic thermoplastic paint applicator machine fitted with profile shoe,glass beads dispenser, propane tank heater and profile shoe heater, drivenby experienced operator on road surface including cost of material, labour,T&P, cleaning the road surface of all dirt, seals, oil, grease and foreignmaterial etc. complete as per direction of Engineer-in-charge andaccordance with applicable specification |
| 48 | Providing and laying at or near ground level precastcement concrete kerb stones of M-15 grade cement in position to the required line, level and curvature in cement mortar 1:3 (1 cement: 3 coarse sand) as per direction ofEIC including carriages of all material as involved upto ste of work complete ( Finished work to be measured ) and pre cast kerb stone shall be approved by the EIC |
| 49 | Painting withready mixedsynthetic enamel paint of approved brand and manufacture of required colour to give an even shade. one or more coats on New work.incl. all carriages of material involved. |
| 50 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees andsaplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared |
| 51 | supply and filling ofbolder stones hand packed into wire crates of approved mesh size 8 SWG 4" x 4" (4mm thick) incl. Tipping of stones filled in crates , equipments charges and all carraiges of materail from sourace to site of work complete (incl. Cost of crates) As per direction of Engineer-in-charge |
| 52 | Providing and laying of RCC spun Pipes NP3 on 1st class bedding of granular material including fixing collar with cement mortar 1:2, earth work in excavation and backfilling the same as cushioning and including cost and carriage of all material from approved source to site of work, with all leads lifts, loading unloading, handling, re-handing complete job. The job incl. carriages and head loads from dumping site to working site at different spots as directed by Engineer In charge i. (225-250mm dia) |
| 53 | Providing and laying of RCC spun Pipes NP3 on 1st class bedding of granular material including fixing collar with cement mortar 1:2, earth work in excavation and backfilling the same as cushioning and including cost and carriage of all material from approved source to site of work, with all leads lifts, loading unloading, handling, re-handing complete job. The job incl. carriages and head loads from dumping site to working site at different spots as directed by Engineer In charge i. (300mm dia) |
| 54 | Providing and laying of RCC spun Pipes NP3 on 1st class bedding of granular material including fixing collar with cement mortar 1:2, earth work in excavation and backfilling the same as cushioning and including cost and carriage of all material from approved source to site of work, with all leads lifts, loading unloading, handling, re-handing complete job. The job incl. carriages and head loads from dumping site to working site at different spots as directed by Engineer In charge i. (450mm dia) |
| 55 | Providing and laying of RCC spun Pipes NP3 on 1st class bedding of granular material including fixing collar with cement mortar 1:2, earth work in excavation and backfilling the same as cushioning and including cost and carriage of all material from approved source to site of work, with all leads lifts, loading unloading, handling, re-handing complete job. The job incl. carriages and head loads from dumping site to working site at different spots as directed by Engineer In charge i. (600mm dia) |
| 56 | Providing and laying of RCC spun Pipes NP3 on 1st class bedding of granular material including fixing collar with cement mortar 1:2, earth work in excavation and backfilling the same as cushioning and including cost and carriage of all material from approved source to site of work, with all leads lifts, loading unloading, handling, re-handing complete job. The job incl. carriages and head loads from dumping site to working site at different spots as directed by Engineer In charge i. (900mm dia) |
| 57 | Providing and laying of 300mm dia MS Pipes as X drainage in position to the required slopes and grades including earth work in excavation and refilling the same and providing of proper cushioning including carriages of pipes upto site of work complete |
| 58 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on new work over as under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 59 | Felling trees of the girth (measured at a height of 1 m above ground level) includingcutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. .1 Beyond 30 cm girth upto and including 60 cm girth |
| 60 | Felling trees of the girth (measured at a height of 1 m above ground level) includingcutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. .2 Beyond 60 cm girth upto and including 120 cm girth. |
| 61 | Manufacturing supplying and fixing retro reflective overhead signage boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type-III of ASTM-D-4956-01 as approved by Engineer-in-charge; letters, borders etc. as per IRC : 67-2001 in silver white with blue colour background and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class -II of ASTM-D-4956- 01 and fixing the same to the plate of structural frame work by means of suitable sized aluminum alloys, rivets or bolts and nuts @ 300mm c/c all along the periphery as well as in two vertical rows along with theft resistant measures including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminum sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawing, specification and direction of Engineer-in-charge (Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). Overhead informatory road signage |
| 62 | Providing Retro-reflective regulatory sign board of size 900mm diameter made out of 2mm thick aluminum sheet, face to be fully covered with high intensity encapsulated lens type retro-reflective sheeting as approved by Engineer-in-charge. Letter, symbols, borders, etc. will be as per IRC:67 with required colour scheme on the boards and with the high intensity grade A. the aluminum sheet to be riveted to M.S. frame of angle iron of size 40x40x4mm. The boards will be fixed to 1 No. 50x50mm square post made of M.S. angle 50x50x4mm, 4m long welded to the frame with adequate anti-theft arrangement. Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminum sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per directions of Engineer-in-charge. |
| 63 | Providing and fixing high intensity heat activated Retro Reflective PVC Tape/Sheeting of approved brand and manufacture including adhesion to surface and all costs and carriages complete |
| 64 | Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 811 |
| 65 | Providing and erecting a wire rope safety barrier with vertical posts of medium weight RS Joist (ISMB series) 100 mm x 75 mm (11.50 kg/m), 1.50 m long 0.85 m above ground and 0.65 m below ground level, split at the bottom for better grip, embedded in M 15 grade cement concrete 450 x 450 x 450 mm, 1.50 m center to center and with 4 horizontal steel wire rope 40 mm dia and anchored at terminal posts 15 m apart. Terminal post to be embedded in M 15 grade cement concrete foundation 2400 x 450 x 900 mm (depth), strengthened by a strut ofRSjoist 100 x 75 mm, 2 m long at 450 inclination and a tie 100 x 8 mm, 1.50 m long at the bottom, all embedded in foundation concrete as per approved design and drawing, rate excluding excavation and cement concrete. |
| 66 | Providing and erecting street light mounted on a steel circular hollow pole of standard specifications for street lighting, 10 m high spaced 40 m apart, 1.8 m overhang on both sides if fixed in the median and on one side if fixed on the footpath, fitted with sodium vapour lamp and fixed firmly in concrete foundation. |
| 67 | Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5 mm) including making drainage opening wherever required etc. complete as per direction of Engineer-in-charge. (Length of finished kerb edging shall be measured for payment). |
| 68 | Road Markers/Road Stud with Lense Reflector / Solar Powered Road Marker ( Solar Stud) Supplying of Solar Raised Pavement Markers made of polycarbonate molded body with circular shape, solar powered,LED self illumination in active mode, 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode. The marker shall support a load of 20000 kg tested in accordance to ASTM D 4280. The marker should be resistant to dust and water ingress according to IP 65 standards and should withstand temperatures in the range of 0 C to 70 C. Color of lighting could be provided in red or yellow (amber) as per requirement and typical frequency of blinking is 1 Hz. There should be current losses of less than 20 microamperes at 2.4 V in sleepcharging mode to enhance the life of the marker and a full charge should provide for a minimum autonomy of 50 hours. The height, width and length of the marker shall not be less than 10 mm x 100 mm x 100 mm. Also, the surface diameter of the marker shall not be less than 100 mm respectively. The weight of the marker shall not exceed 0.5 Kilograms. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive and complete as directed by the engineer. |
| 69 | Retro-Reflectorised Traffic Signs Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3,2mm thick aluminium sheeting, 3mm/4mm thick Aluminum composite material sheet depending on the size of the sign fixed over back support frame of min 25x25x3mm Angle mountedon a mild steelcircular pipe 65 NB ,3.2 mm thicknness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. |
| 70 | Direction and Place Identification Signs with size more than 0.9 sqm size Board. Providing and erecting direction and place identification retro-reflectorised sign as perIRC :67 made ofHigh Intensitygrade sheeting lause 801.3, fixed over aluminium sheeting, 2 mm thick orAluminum composite material sheet with overall thickness of 4 mmwith areaexceeding 0.9 sqm fixed over back support frame of min 40 x 40 x 5 mm MS Angle mountedon two nos. of mild steelcircular pipe 65 NB ,3.2 mm thicknness and 4.5 meter total height firmly fixed to the ground by means of properly designed foundation with M 25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing |
| 71 | Renovation Lawns including, Weeding, Forking the Ground, Top Dressing with Forked Soil Renovation lawns including, weeding, forking the ground, top dressing with forked soil, watering and maintenance the lawns, for 30 days or more, till the grass forms a thick lawn, free from weeds, and fit for moving and disposal of rubbish as directed, including supplying good earth, if needed but excluding the cost of well decayed farm yard manure |
| 72 | Erosion Control on Shoulders&slopes: Dressing of shoulders/Berms by way of removal of humps and filling of depressions,replensining/lowering earthen/hard shoulders using available earth/material from a lead of 15 mtrs incld removing vegetation and in-equalities. |
| 73 | Tree Guard with MS IronProviding and fixing MS iron tree guard 60 cm dia and 2 metre high above ground level formed of 4 Nos (25 x 6 mm) and 8 Nos (25 x 3 mm) vertical MS riveted to 3 Nos (25 x 6 mm) iron rings in two halves, bolted together with 8 mm dia and 30 mm long bolts including painting two coats with paint of approved brand over a coat of priming, complete in all respects. |
| 74 | Painting Lines, Dashes, Arrows etc on Roads in Two Coats on New Work Painting lines, dashes, arrows etc on roads in two coats on new work with ready mixed road marking paint conforming to IS:164 on bituminous surface, including cleaning the surface of all dirt, dust a nd other foreign matter, demarcation at site and traffic control |
| 75 | Road Delineators Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and conforming toIRC-79 and the drawings. |
| 76 | Tubular Steel Railing on Medium Weight Steel Channel ( ISMC series) 100 mm x 50 mm Providing, fixing and erecting 50 mm dia steel pipe railing in 3 rows duly painted on medium weight steel channels (ISMC series) 100 mm x 50 mm, 1.2 metres high above ground, 2 m centre to centre, complete as per approved drawings |
| 77 | Maintenance of Earthen Shoulder (filling with fresh soil) Making up loss of material/ irregularities on shoulder to the design level by adding fresh approved soil and compacting it with appropriate equipment. |
| 78 | Land Slide Clearance in soil Clearance of land slides in soil and ordinary rock and disposal of the same on the valley side |
| 79 | Slip Clearence in ordinary soils disposal upto 50 m and lift upto 1.5m |
| 80 | Slip Clearence in soils mixed with moorum/ Kankar/ Shingle/ boulders disposal upto 50 m and lift upto 1.5m |
| 81 | Restoration of Rain Cuts Restoration of rain cuts with soil, moorum, gravel or a mixture of these, clearing the loose soil, benching for 300 mm width, laying fresh material in layers not exceeding 250 mm and compacting with plate compactor or power rammers to restore the original alignment, levels and slopes |
| 82 | Excavating, supplying and filling of local earth (including royalty)by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. Incl carraige from approved source |
| 83 | Cleaning and repair of Road Furniture: White Washing with lime to give and even shade on new work (Three or more coats) to parapets, Guide stones, Tree Trunks etc incl. cost and carriage complete. |
| 84 | Repair/ Refixing of Disturbed caution boards, signage, refixing km stones, Guard stones, Guard rails etc incl. cost and carriage complete. |
| 85 | Painting of km stones, Kerb stones, informatory Boards incl cost and carriage complete. |
| 86 | Lettring of km stones incl cost and carriage complete |
| 87 | Removal of Unhygenic material (so classified by site Engineer) from designated site and its disposal as per direction of site Engineer all inclusive. |
| 88 | Providing of Geotech Photographs of ech item of work minimum 3 sets (One set comprising of Photograph before, during and after execution of work of size 26 cm x 21 cm |
| 89 | Providing and Fixing of Standarad quality Green net (jali) incl all fittings and fixtures as per direction of Engineer-in-Charge |
| 90 | Providing and Fixing of Polythene of Black/White Colour of good standard incl all fittings and fixtures as per direction of Engineer-in-Charge |
| 91 | Providing and Serving of Tea/Kehwa with Biscute/Kulchaincl. cost of Disposable cups |
| 92 | Refreshment (Packed) which incl. (Samosa, egg, Banana, Biscuits) |
| 93 | Providing and Supply of Mineral Water |
| 94 | Rice Basmati |
| 95 | Kashmiri Rice |
| 96 | Two Non-Veg Dishes |
| 97 | Two Veg Dishes |
| 98 | Reinforcement for R.C.C work, including straightening, cutting, bending, placing in position and binding all complete with Thermo-mechnically treated bars of grade Fe-500 or more, including all carriages of material involved upto site of work complete |
| 99 | Wall painting with synthetic emulsion paint of approved brand and manufacture to give an even shade two or more coats on new work.including all carriages of material upto site of work complete. |
| 100 | Finishing walls with Textured exterior Excel paint of approved brand and manufacture to give an even shade with two or more coats on new work with priming coat and repairing of scratches by applying wall putty for exterior work.including all carriages of material upto site of work complete. & scafolding charges complete. |
| 101 | Brick work with F.P.S bricks of class designation 75 in foundation and plinth in cement mortar 1: 6 (1 cement: 6 coarse sand), including extra for brick work in superstructure above plinth level up to Floor-V level, including all carriages of material involved upto site of work complete. |
| 102 | Random rubble masonry with hard stone from quarry in foundation and plinth in cement mortar 1:6 (1cement : 6 course sand), including leveling up with cement concrete 1:6:12 (1cement: 6 course sand: 12 graded stone aggregate 20mm nominal size) at plinth level with all leads lifts cost & carriages of materials involved upto site of work complete |
| 103 | Dry Random Rubble masonry in foundation and plinth using quarry stones with bond stones all leads lifts cost & carriages of materials involved upto site of work complete. |
| 104 | P/L 50mm thick Cement concretecoopingwith cement conc. 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone agg. 20mm nominal size with all leads lifts cost & carriages of materials involved upto site of work complete. |
| 105 | P/L 40mm thick Cement concretecoopingwith cement conc. 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone agg. 20mm nominal size with all leads lifts cost & carriages of materials involved upto site of work complete. |
| 106 | Easing of Door/ Window shutters with complete fittings including all leads, lifts, costs and carriages of materials upto site of work complete |
| 107 | Dismentalling of Reinforcedcement concrete and stacking of serviceable materials (Steel)and disposal of unserviceable material beyond site as per directions of engineer incharge at site. |
| 108 | Demolishing of cement concreteincluding disposal of unserviceable material beyond siteas per directions of engineer incharge at site. |
| 109 | Dismantelling/ demolishing of stone masonary including disposal of sameincluding stacking of serviceable material and disposal of unserviceable material as per the directions of Engineer incharge at site. (Dismentalled/ serviceabale materials to be reused at site of work) |
| 110 | Dismantelling/ demolishing ofBrick masonary including disposal of sameincluding stacking of serviceable material with removing of mortor from serviceable bricks and disposal of unserviceable material as per the directions of Engineer incharge at site. (Dismentalled/ serviceabale materials to be reused at site of work) |
| 111 | Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead as per directions of Engineer incharge at site. |
| 112 | Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead as per directions of Engineer incharge at site. |
| 113 | Providing and fixing 35mm thick panelled or panelled and glazed shutters for windows & clerestory windows including ISI marked M.S. pressed but hinges bright finished of required size with necesary screws including cost ofglass panes (4mm thick) fixed with beading of required size & makeas per the direction of engineer incharge at site with all cost & carriage of material involved Including applying Polishing / Paint ( first class kail wood) |
| 114 | Providing and fixing 35mm thick Ist class kail woodwire gauze shutters using galvanized M.S wire gauze of average width for aperture 1.4mm in both directions with wire of dia 0.63mm for doors , windows and CSW with hinges and screws etc with all cost & carriages of material upto the site of work Including applying Polishing / Paint. |
| 115 | Providing and fixing 35mm thick panelled shutters for doors, including ISI marked M.S. pressed but hinges bright finished of required size with necesary screws including cost of Kailwood panells including all cost & carriage of all material involved( first classkail wood) Including applying Polishing / Paint |
| 116 | Providing & fixing of 4mm thick glass panes to window openingsincluding cost of beading, nails and all leads, lifts, costs and carriages of materials upto site of work complete. (Fixed panes) |
| 117 | Providing/fixing of colour coated (High Rib) sheets for roofing including vertical / curved surface fixed with Polymer coated J or L hooks botls and nuts 8mm diameter with butmen and G.I limplet washers or with G.I Limpetwashers (0.50 mm thick) including cost and carriages of materials complete job. |
| 118 | Providing corrugated G. S. sheet roofing with0.63 mm thick with zinc coating not less than 275 gram/m2 including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required including allcosts & carriages of materials upto site of work complete. |
| 119 | Repairs to existingKhatamband ceiling of the same designmatching to the existing ceiling including applying malamine / MDF polish of approved quality with cost of nails, Screws,scafolding charges etc. All inclusive with cost of labour, materials andcarriagesof all involved materialscomplete job |
| 120 | Providing & fixing of12mm plyboardunder paneling including cost of Nails etc of approved quality as per the directions of incharge Engineer at site Including all crriages upto site of work. |
| 121 | Providing & fixing of12mm thick imported wooden panelling over plywood base including cost of Nails, Cornice etc of approved quality, applying malamine / MDF polish of approved quality. All inclusive with cost of material,labour and carriage of all involvedmaterials upto site of work complete. Work to be executed as per the directions of Engineer inchargeat site of work.(Excluding cost of plyboard) |
| 122 | Providing & fixing of laminated wooden flooring 8mm thick AC / 4-5 Non scratching type of aapprovedqualitylaid over 06 mm thick thermocoal with 50mm wide skirting / door profile of approved quality Green Panel/ Action Tesaincl. cost &carriage of materials involved complete job |
| 123 | Providing & fixing of Almunium composite panels of size 3mm for external facades as per architectural design including scafolding and all necessary items as per directions of engineer incharge at site complete jobincluding all carriages of material upto site of work complete. |
| 124 | Providing & layingChequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) Dark shade using ordinarycement with cariages of alll involved materials. |
| 125 | Providing/ Fixing of acrylic board5mm thick including letter writing with logo of approved shape , size & design duly approved byengineer incharge. including plywood sheet base of (3x2"-0"") and acrylic board of (3"x2") with all accessories like ribbon, sessor, curtain, decoration as per requirement. All inclusive with cost of labour, material & carriages of all involved materials upto site of work complete job (Work to be carried out asper directions of Engineer incharge)for inaugration purpose |
| 126 | Providing/ Fixing of granite stoneboard18mm thick including letter writing with logo of approved shape , size & design of size (3"x2")duly approved byengineer incharge with all accessories like ribbon, sessor, curtain, decoration as per requirement. All inclusive with cost of labour, material & carriages of all involved materials upto site of work complete job (Work to be carried out asper directions of Engineer incharge)for inaugration purpose |
| 127 | Providing and laying 50mm thick interlocked cement concrete tiles of approved quality Rubber moulded(anti skid)for path of required shape,size,colour laid over a bed of 50mm thick sand cousion over a bed of 75mm thick lean concrete in 1:4:8 mix laid over 100mm thick stone soling including cost of cement concrete side blocks of 12" x 6" size laid in cement concrete 1:2:4 mix (1 cement: 2 course sand: 4 graded stone aggregate) including polishing,cleaning of Tiles. All inclusive with labour, cost & carriage of all involved materials complete job. |
| 128 | Supply & fixing ofCurtains of approved cloth, size (7"x4"), colour, qualitymakeincluding all carriages involved.(sample to be got approved from competent authority) |
| 129 | Supply & fixing of Curtains with full crewel work of approved cloth, size (7"x4"), colour, qualitymakeincluding all carriages involved.(sample to be got approved from competent authority) |
| 130 | Providing and fixing nickle plated M.S. pipe curtain rods with nickle plated brackets and ornamental type M.S Nickle plated steel holders 20 mm dia pipe(Heavy type) incl. cost &carriage of materials involved complete job |
| 131 | Supply of Uniform for cooks , chefs & helpers (Unifrom shall include upper/ Shirt/ Apran Lower/ Trouser / Pent, White Tennis fleet, socks, cap, gloves) |
| 132 | Providing & laying of furnishingof approved quality 1st grade carpet (Kohinoor, Crown)including P/L of Thermocol of superior quality (10mm thickness) with cost/ labour/ carriage and other charges complete job (Sample to be got approved from competent authority before laying of furnishing) |
| 133 | Providing & laying of furnishingof approved quality 1st grade carpet (Khalifa)including P/L of Thermocol of superior quality (10mm thickness) with cost/ labour/ carriage and other charges complete job (Sample to be got approved from competent authority before laying of furnishing) |
| 134 | Providing & fixing of furnishing of approved quality (Iranian wall to wall) including sewing, Stiching sides and fixing with SR solution including cost of 12mm Thermocol complete job. Including all carriages upto site of work (Sample to be approved by competent authority) |
| 135 | Providing and fixing of Excel matting fixed with SR solutions/ adhesive of superior qualityincluding cost of SR as per directions of Engineer incharge at site (sample to be got approved by competent authority)Grade 1st |
| 136 | Providing and fixing of Excel matting fixed with SR solutions/ adhesive of superior qualityincluding cost of SR as per directions of Engineer incharge at site (sample to be got approved by competent authority) Grade 2nd |
| 137 | Providing and fixing of Excel matting fixed with SR solutions/ adhesive of superior qualityincluding cost of SR as per directions of Engineer incharge at site (sample to be got approved by competent authority) Grade 3rd |
| 138 | Supply of leather covered 5 seater Sofa set of approved colour, design, size and make with central and side tables including all carriages upto site of work ( sample to be got approved from competent authority) complete job |
| 139 | Renovation / Repair of 5 seat Sofa set (3 seater 1 No, single seater 02 No) including providing springs ,cloth covers/ cushionsetc with all carriages upto site of work complete job |
| 140 | P/F ofPVCwaterstorage tank with platfarmof Approvedmake & Design including inlet & outlet& over flow arrangements with all necessaryfittings completein all respects.(3 Layer with inner layer of food grade) including all carriages upto site of work complete SINTEX, MOON, STAR |
| 141 | Providing & fixing of 3 layer PP-R Pipes confirming to IS:15801, UV stablized and anti microbeal fusion welded, having thermal stability for Hot & Cold water supplyincluding all palin & Brass threaded/required fittings with cost & carriages of materials involved upto site of work complete job. PN- 16 pipe , 25mm OD (SDR-7.4) Internal work concealed pipe fitting. |
| 142 | Providing & fixing of 3 layer PP-R Pipes confirming to IS:15801, UV stablized and anti microbeal fusion welded, having thermal stability for Hot & Cold water supplyincluding all palin & Brass threaded/required fittings with cost & carriages of materials involved upto site of work complete job. PN- 16 pipe , 32mm OD (SDR-7.4) internal work concealed pipe fitting. |
| 143 | Providing & fixing of 3 layer PP-R Pipes confirming to IS:15801, UV stablized and anti microbeal fusion welded, having thermal stability for Hot & Cold water supplyincluding all palin & Brass threaded/required fittings with cost & carriages of materials involved upto site of work complete job. PN-10 pipe , 16mm OD (SDR-11) External work/ Exposed on walls |
| 144 | Providing & fixing of 3 layer PP-R Pipes confirming to IS:15801, UV stablized and anti microbeal fusion welded, having thermal stability for Hot & Cold water supplyincluding all palin & Brass threaded/required fittings with cost & carriages of materials involved upto site of work complete job.PN-10 pipe , 20mm OD (SDR-11) External work/ Exposed on walls |
| 145 | Providing & fixing of 3 layer PP-R Pipes confirming to IS:15801, UV stablized and anti microbeal fusion welded, having thermal stability for Hot & Cold water supplyincluding all palin & Brass threaded/required fittings with cost & carriages of materials involved upto site of work complete job. PN-10 pipe , 32mm OD (SDR-11) External work/ Exposed on walls |
| 146 | Providing & fixing of 3 layer PP-R Pipes confirming to IS:15801, UV stablized and anti microbeal fusion welded, having thermal stability for Hot & Cold water supplyincluding all palin & Brass threaded/required fittings with cost & carriages of materials involved upto site of work complete job.PN-10 pipe , 40mm OD (SDR-11) External work/ Exposed on walls |
| 147 | Providing & fixing of 3 layer PP-R Pipes confirming to IS:15801, UV stablized and anti microbeal fusion welded, having thermal stability for Hot & Cold water supplyincluding all palin & Brass threaded/required fittings with cost & carriages of materials involved upto site of work complete job.20mmStop Cock / Ball Valve |
| 148 | Providing & fixing of 3 layer PP-R Pipes confirming to IS:15801, UV stablized and anti microbeal fusion welded, having thermal stability for Hot & Cold water supplyincluding all palin & Brass threaded/required fittings with cost & carriages of materials involved upto site of work complete job.32mm stop cock / Ball Valve |
| 149 | Providing & fixing ofGI Pipes and accessories of app. brands & manufacture (B Class) Pipes 15mm NB (Medium grade) |
| 150 | Providing & fixing ofGI Pipes and accessories of app. brands & manufacture (B Class)Pipes 20mm NB (Medium grade) |
| 151 | Providing & fixing ofGI Pipes and accessories of app. brands & manufacture (B Class)Pipes 25mm NB (Medium grade) |
| 152 | Providing & fixing ofGI Pipes and accessories of app. brands & manufacture (B Class) G.I Unions 15 mm dia |
| 153 | Providing & fixing ofGI Pipes and accessories of app. brands & manufacture (B Class)G.I Unions 20 mm dia |
| 154 | Providing & fixing ofGI Pipes and accessories of app. brands & manufacture (B Class) G.I Unions25 mm dia |
| 155 | Providing & fixing ofGI Pipes and accessories of app. brands & manufacture (B Class)Gun mattle Gate valve15mm Nominal Bore |
| 156 | Providing & fixing ofGI Pipes and accessories of app. brands & manufacture (B Class) Gun mattle Gate valve 20mm Nominal Bore |
| 157 | Providing & fixing ofGI Pipes and accessories of app. brands & manufacture (B Class) Gun mattle Gate valve 25mm Nominal Bore |
| 158 | Providing and fixing of 15mm Angle valve |
| 159 | Providing and fixing of 15mm CP Bib cock |
| 160 | Providing and fixing of wall mixer |
| 161 | Providing and fixing of Basin mixer |
| 162 | CP Brass Health faucet (Hand Shower) with CP Flush Pipe, CP Nozzel & Hook. (Jaguar) |
| 163 | Providing and fixing of Diverter including diverter support (Jaguar or equivellent) |
| 164 | Spandal of various dia for angle valve/ Bib cock/ mixer of all sorts |
| 165 | Leg pair for wall/ sink/ Basin Mixers |
| 166 | CP Extension Niples 20mm, 25mm, 40mm long |
| 167 | CP Extension Niples 32mm,40mm long |
| 168 | Ball Valvewith float |
| 169 | Tafflon Tape Rolls |
| 170 | Providing and fixing of Satinless steel Soap case of approved quality |
| 171 | P/F of 100mm stainless steelGrating (Heavy Duty) |
| 172 | Providing/ Fixing of stainless Steel KitchenSink of approved superior quality with all necessary fittings like 32mm / 40mm CP brass waste with coupling, Waste Pipe etc complete(3".0"" x 1".6"") |
| 173 | Supply of PVC pipe Rolls (foam/ flexible pipe having length 100 RFT each Roll)(Sample to be got approved from Eng. Incharge at site |
| 174 | Supply of PVC / Foam insulation for external G.I pipes of different dia meter15mm dia |
| 175 | Supply of PVC / Foam insulation for external G.I pipes of different dia meter20mm dia |
| 176 | Supply of PVC / Foam insulation for external G.I pipes of different dia meter 25mm dia |
| 177 | Supplyof polythene sheet for insulation(2"-6"" wide) |
| 178 | Supply ofPVC connection of required size ofapproved /Superior Quality |
| 179 | Providing & Fixing of 0.50 HP Submersible (Open well)water pump with all fittings like inlet and outlet connections , electric controlled setup with service line. Work to be executed as per the directions of Engineer In-Charge Complete jobincluding all carriages upto site of work (Kirlosker, Usha, Cromptom Greaves, Havelles or equivalent) |
| 180 | Repairing of AC"s of all capacities 1.00 Ton, 1.5 Ton, 2.00 Ton including replacing of damaged spare parts |
| 181 | Supply of water heating geysers of approved make and made (Classic, Sharp,Usha) with all necessary fittingsand fixtures complete Job. 50 Ltr capacity |
| 182 | Supply of water heating geysers of approved make and made (Classic, Sharp,Usha) with all necessary fittingsand fixtures complete Job. 25 Ltr capacity |
| 183 | Supply of water heating geysers of approved make and made (Venus Racold ) with all necessary fittingsand fixtures complete Job. 50 Ltr capacity |
| 184 | Supply of water heating geysers of approved make and made (Venus Racold ) with all necessary fittingsand fixtures complete Job. 25 Ltr capacity |
| 185 | Supply and fixing of geyser elements with thermostate including all necessary fittingsand fixtures complete |
| 186 | Supply and fixingof 1.0 HPwater Motor with all fittings with inlet and outlet connections ( Kirlosker, Usha, Cromptom Greaves, Havelles or equivalent) |
| 187 | Providing & Fixing of pump for 1.00 HPwater motorwith all fittings .Work to be executed as per the directions of Engineer In-Charge Complete jobincluding all carriages upto site of work |
| 188 | Supply and filling of Gas for AC"s of all capacities including all charges. |
| 189 | Supply of indoor PCB/ controlling unitfor AC (Daikhan, Hitachi or equivalent) 5 star rating |
| 190 | Supply of insulated copper pipes for AC"s of approved quality. |
| 191 | Supply of PVC insulatedwire (copper) of Philips, Alba, Havelles or equivalent 1.50 sqm |
| 192 | Supply of PVC insulatedwire (copper) of Philips, Alba, Havelles or equivalent1.00 sqm |
| 193 | Supply of PVC insulatedwire (copper) of Philips, Alba, Havelles or equivalent 2.5 sqm |
| 194 | MCB"s Philips, Havelles, Anchor or equivalent6 Amp |
| 195 | MCB"s Philips, Havelles, Anchor or equivalent 16 Amp |
| 196 | MCB"s Philips, Havelles, Anchor or equivalent32 Amp D/P |
| 197 | MCB"s Philips, Havelles, Anchor or equivalent40 Amp D/P |
| 198 | MCB"s Philips, Havelles, Anchor or equivalent63 Amp D/P |
| 199 | Supply of PVC Channels (25mm thick) |
| 200 | Repairs and overhauling of Lawn mover HRU-196 complete job including all carriages to and fro. |
| 201 | Supply and installation of LED Flood lights of aproved make Philips, Havelles, Anchor or equivalent 30 watt |
| 202 | Supply and installation of LED Flood lights of aproved make Philips, Havelles, Anchor or equivalent 50 watt |
| 203 | Supply and installation ofTube lights of aproved make Philips, Havelles, Anchor or equivalent 10 watt |
| 204 | Supply and installation ofTube lights of aproved make Philips, Havelles, Anchor or equivalent 20 watt |
| 205 | Repairing of existing electric fitting points by way of replacing of damaged parts i.e Three pin tops/ Three pin sockets/Switches including replacing of damaged wire Complete. As per the directions of Engg. Incharge at site.Lighting points |
| 206 | Repairing of existing electric fitting points by way of replacing of damaged parts i.e Three pin tops/ Three pin sockets/Switches including replacing of damaged wire Complete. As per the directions of Engg. Incharge at site.Heating Points |
| 207 | Repairing of existing electric fitting points by way of replacing of damaged parts i.e Three pin tops/ Three pin sockets/Switches including replacing of damaged wire Complete. As per the directions of Engg. Incharge at site.Fan Point without fan |
| 208 | Lighting Points :- One Lighting point shall incl. Wiring for lighting points in 1.5Sqmm PVC insulated Copper wire & 2.5Sq mm PVC insulated multi-strand Copper wire for lighting Sub –mains, 6Amp one way switch , 2mm thick PVC conduit/ Channel with bends , Junction boxes etc, 6Amp S pole MCB,10 Amp DP MCB , 2 way DB for Housing MCB and Hylem Sheet with wooden box recessed in walls with accessories. |
| 209 | Heating points :- One Heatingpoint shall incl. Wiring for heating points in 2.5Sqmm PVC insulated Multi-Strand Copper wire & 4 Sq mm PVC insulated multi-strand Copper wire for heating Sub –mains, 16Amp switch socked combined, 2mm thick PVC conduit/ Channel with bends , Junction boxes etc, 10Amp S pole MCB, 2 way DB for Housing MCB and Hylem Sheet with wooden box recessed in walls with accessories. |
| 210 | Fan points :-One Fan point shall incl. Wiring for lighting points in 1.5Sqmm PVC insulated Copper wire & 2.5Sq mm PVC insulated multi-strand Copper wire 1200 mm ceiling fan /225 mm exhaust fan with ceiling roses & PVC Square block , 350 Watts electronic fan dimmer , 2mm thick PVCconduit/ Channel with bends , Junction boxes etc, 6Amp S pole MCB,10 Amp DP MCB , 2 way DB for Housing MCB for lighting circuits and Hylem Sheet with wooden box recessed in walls with accessories. |
| 211 | Providing and laying Vetrified floor tiles different size(thickness to be specified by the manufacture) with water absorption less than0.08% and confirmed to IS:15622 of approved make in all colors and shades , laid on 20mm thick cement mortor 1:4(1: cement :4 course sand) including grouting the joints with white cement and matching pigments etc complete. Size 60x60Cm |
| 212 | Providing and laying Ceramic glazed Wall tiles different size(thickness to be specified by the manufacture) with water absorption less than0.08% and confirmed to IS:15622 of approved make in all colors and shades , laid on 20mm thick cement mortor 1:4(1: cement :4 course sand) including grouting the joints with white cement and matching pigments etc complete. Size 60x60Cm |
| 213 | Providing and fixing water closet squatting pan ( Indian type W.C pan) with 100mm sand cast Iron P or S trap 10liter low white P.V.C flushing cistern incl. flush pipe approved make manually controlled device ( handle lever ) conforming to IS; 7231 ,with all fitting and fixtures complete including cutting and mixing good the walls and floors whereverrequiredstainless sated AISI.304 (18/8) Orissa pattern WC pan of size 585x480mm with flush pipe & integrated type foot rests |
| 214 | Providing and fixing 18mm thick Granite marble mirrorpolished machine cut for floors of required size of approved shades , colour and texture laid over 20mnm thick base cement mortar (1:4) and joints treated with white cement with machine pigments incl. rubbing curing etc. |
| 215 | Providing and fixing of Popular wood frames (Seasoned) at all positions including all sorts of carriages complete job. |
| 216 | Replacing of old Tubular Battery with NewInva Tubular Battery of200/ 180 AH Ah Capacity Exide, Luminious or equivalent |
| 217 | Supply of Epochem Distilled water for batteries |
| 218 | Suply of Almunium make Folding/ collapsible Ladderofapproved quality and make (3 Mtr) height |
| 219 | Suply of Almunium make Folding Ladderofapproved quality and make (1.75 Mtr) height |
| 220 | Hire charges for decoration of VIP Lounges/ Buildings on eve of celebration of National days by way of illumination with neon lighting. (All inclusive with hire charges & labour complete job) |
| 221 | Providing & Fixing of flex banner of anysize including writing and monogram including frame work complete . |
| 222 | Hire Charges for suppying of following items Plastics Chairs |
| 223 | Hire Charges for suppying of following items Matresses |
| 224 | Hire Charges for suppying of following itemsBlankets |
| 225 | Hire Charges for suppying of following itemsPillow |
| 226 | Rent for supplying of Tents of different sizes incl. all sorts of carriages complete job21X30 |
| 227 | Rent for supplying of Tents of different sizes incl. all sorts of carriages complete job18X24 |
| 228 | Rent for supplying of Tents of different sizes incl. all sorts of carriages complete job (Size 15X20) |
| 229 | Rent for supplying of Pandalas of different sizes incl. all sorts of carriages complete job 20x30 |
| 230 | Rent for supplying of Pandalas of different sizes incl. all sorts of carriages complete job30X40 |
| 231 | Rent for supplying of Pandalas of different sizes incl. all sorts of carriages complete job30X60 |
| 232 | Hire charges for supply, insatallation, testing, commissioning of Generator incl fuel and sorts of carriage involved complete job |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
