Tender For Repair And Maint Of Roof Leakage Seepage Rcc Chajja Slab Flooring Joinery Plumbing Sanitary Fittings Certain Br Works At Artrac Line Cb Line Hpp Dunn Marg Gen Road And Mall Road Of Age Br Ii Under Ge Maint Inf School Mhow
Tender Value
30 Lakhs
Estimated cost
Bid Submission
23 May 2024
0 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Indore → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair And Maint Of Roof Leakage Seepage Rcc Chajja Slab Flooring Joinery Plumbing Sanitary Fittings Certain Br Works At Artrac Line Cb Line Hpp Dunn Marg Gen Road And Mall Road Of Age Br Ii Under Ge Maint Inf School Mhow
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 06-May-2024 | BOQ Corrigendum | BOQ | 16-May-2024 |
| 2 | 16-May-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 23-May-2024 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames with shutter (with out taking off shutters from the frame) area n. exc 1.5 sqm each complete all as specified |
| 2 | Taking down chowkhats or frames with shutter (with out taking off shutters from the frame) area exc 1.5 butnot exc 4.0 sqm each complete all as specified |
| 3 | Taking down shuters of any description not exc 1 sqmeach and removing from site complete all as specified |
| 4 | Taking down shuters of any description exc 1 sqm but not exc2 sqm each complete all as specified |
| 5 | S & F second class hard wood plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified. |
| 6 | S&F Mild steel angle or flat iron, small articles such as hold fast , brackets, straps, cleats, etc for door/window chowkats fe 410 W (gde E 250) qualityA including applying two coats of red oxide primer complete all as specified |
| 7 | M&L for PCC 1:3:6 type C1 using 20mm graded aggregate as in bed blocks of hold fastcomplete all as specified |
| 8 | M&L for preparing surface of wood ,steel anr iron work of any description such as back of chowkats,hold fast etc area exc 0.10 sqm but n.exc 0.50 sqm and trated with tar or coal tar black paint complete all as specified |
| 9 | S&F 35mm thick second class hard wood plain, framed pannelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per (IS : 1003 part-I , kiln seasoned and chemically pressure treated complete all as specified. |
| 10 | S & F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified |
| 11 | S&F second class hard wood35 mm thick glazed and skeleton (doors)shutters, open rebated and prepared to receive glass gauge etc, (with sash bars) edges of framing plain, chafered or rounded , fitted with cut and mitred beads for securing glass etc, size of members of shutter as specified in SSR Part I, Section 8, clause 8.24 (a) Supplied and fitted to chowkats complete all as specified |
| 12 | S&F 30mm thick factory made, second class hard wood,glazed and skeleton window/ventilator shutters, open rebated and prepared to receive glass,gauze etc(with sash bars) edges of framing plain, chamfered or rounded ,fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR part-I section 8,clause 8.24 (b) and for window and fixed with chowkats, chemically pressure treated complete all as specified |
| 13 | S&Ffactory made solid PVC door frame of size 50mm x 47mm made out of plain 5mm plain colour PVC sheet reinforced with ms square tube, with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and as directed. |
| 14 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of ms tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colourPVC sheet for top rail, lock rail & bottom rail. Panelling of plain colourPVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed. |
| 15 | S&F in repairs steel window with side hung shutter including projecting type hinges with steel handle, peg stay complete with glazing bars dovetailed or welded, etc complete all as specified |
| 16 | M&L for preparation of new wood and wood based surfaces of any description not other wise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. |
| 17 | S & Fgalvanised mild steel wire cloth of0.56mm dia wire and average width of aperture 1.18mm & fixed with tacks or galvanisedwire staples,etc complete all as specified |
| 18 | S & F in repairs galvanised mild steel wire cloth of0.56mm dia wire and average width of aperture 1.18mm & fixed with tacks or galvanised wire staples,etc complete all as specified. |
| 19 | S&Fsheet glass ordinary quality 3mm thick and glazing with oil putty in squarenot exc 0.5 Sqm eachcomplete all as specified |
| 20 | S&F 3mm thick figured glass pin head type in squre not exc 0.5 sqm in each pane ventilator / window shutter complete all as specified |
| 21 | Hacking out old broken glass( any tickness size ,quality or description ) from wooden frame or stone etc and S&F 3.00 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beading in square not exceeding 0.50 sqm in each panes complete all as specified . |
| 22 | S&F 100 mm Butt hinges medium weight cold rolled mild steel and fixed |
| 23 | S&F 75mm Butt hinges medium weight cold rolled mild steel and fixed |
| 24 | S&F 150 mm long Aluminum anodized barrel tower bolts of extructed section |
| 25 | S&Fin repairs 150 mm long Aluminum anodized barrel tower bolts of extructed section |
| 26 | S&F 125 mm long Aluminum anodized barrel tower bolts of extructed section |
| 27 | S&F in repair 125 mm long Aluminum anodized barrel tower bolts of extructed section |
| 28 | S&F aluminum alloy handles fabricatedanodised of 150 mm long |
| 29 | S&F in repairs aluminum alloy handles fabricatedanodised of 150 mm long |
| 30 | S&F for aluminum alloy handles fabricatedanodised of 125 mm long |
| 31 | S&F in repairs aluminum alloy handles fabricatedanodised of 125 mm long |
| 32 | S&F in repairs300 mm long Aluminiumalloy anodised sliding door bolt with hasp staple (bolt type) including fixing clips of sheet, cast or extruded section and fixingbolts and 16mm dia bolt sliding bolts of extrudedsection complete all as specified |
| 33 | M&L for resecuring or easing & adjusting, without taking down, shutters of any description n.exc 1.00 sqm eachin same opening complete all as specified and directed. |
| 34 | M&L for resecuring or easing & adjusting, without taking down, shutters of any description exc 1.00 sqm but n.exc 2 sqm each in same opening complete all as specified and directed. |
| 35 | Dismantling timber framed fillets ,rails, post, rafters purlins, etc under 40Sqcm in section complete all as specified |
| 36 | S & F second class hard wood plain fillets , square rectangular or triangular in section ,clean sawnsecuredwith nails or breads of sizeexceeding 6sqcm but not exceeding 13 sqcm complete all as specified |
| 37 | S&F in repairs 12mm thick Prelaminated particle board, Exterior grade,prelaminated one side with decorative choice lamination &other side balancing white lamination,fixed with screws to timber frame work complete all as specified. |
| 38 | S&F in repairs18/19mm thick Prelaminated particle board, Exterior grade,prelaminated one side with decorative choice lamination &other side balancing white lamination,fixed with screws to timber frame work complete all as specified. |
| 39 | S&F in repairs30 mm wide contineous piano hinges mild steel ,bright finish or electro-galvanised complete all as specified |
| 40 | S&F in repair 300 mm ordinary rat tail rod pattern door spring MS including roller & plate all as specified |
| 41 | S&F in repairs 100 mm hasp & staple safety type of aluminium anodised including bolt to hinges plate and fixed with screws complete all as specified |
| 42 | S&F in repair 25 mm dia mild steelPVC coateddrapperycurtain rod withbrass /nickel chrom polish bracket for each curtain complete all as specified |
| 43 | Taking down cement plaster on brick or concrete surfaces, parapets including raking out joint, hacking for key, scrubbing down with water etc complete all as specified |
| 44 | Demolition of brick work built in cement mortar of any descriptionincluding all quions ,arcches ,pillars etc complete all as specified |
| 45 | M & L for brickwork with sub class \"B\" modular bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and as directed. |
| 46 | All as per item No 45 above but except brick .Note: Serviceable bricks obtained from demolition shall be reused |
| 47 | M&L for brick workwithsub class `B `half brick workbuilt in CM 1:4straight or curved on plan exceeding 6.0mmean radius complete all as specified anddirected. |
| 48 | M&L for rendering 15mm thick in CM 1:4 onbrick or concrete surface finished even and smooth without using extra cement complete all as specified |
| 49 | M&L for rendering 10 mm thick in CM ( 1:6 ) on wall / concrete surfaces finished even and smooth without using extra cementcomplete all as specified |
| 50 | M&L for rendering 15 mm thick in CM ( 1:4 ) mixed with WPC on wall / concrete surfaces finishedeven and smooth without using extra cementcomplete all as specifiedNote:WPC shall be measured and paid separately under relevant item. |
| 51 | M&L for 5 mm thick plaster on ceiling in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified |
| 52 | Supply only Liquid Water proofing compound PIDIPROOF LW+ of Dr FIXIT or other equivalent as approved. |
| 53 | M&L for preparation of new plasteredsurface of wall and applying two coats of oil emulsion distemper over a coat of cement primer over a coat of JK/Birla wall care puttycomplete all as specified |
| 54 | M&L for preparation of newplasteredsurfaces of walls and applying two coats of cement based paint over a coat of cement primer completeall as specified |
| 55 | M&L for preparing new surfaces and applying three coats of white wash on ceilingand cornices complete all as specified |
| 56 | Demolition of cement concrete in ground floor and paving not exceeding 15cm thick ( below or above ground level ) complete including removal of debries out side MD land all asspecified and as directed . |
| 57 | M&L for cement concrete 1:2:4 type B1 using20 mm graded aggregateas in coping, surface channel, bearing course, manhole / drain channeland other similar worksetc in including necessary formwork complete all as specified |
| 58 | M&L for40mm thick PCC1:2:4 type B1using 20 mm graded stone aggregateas in flooring complete all as specified |
| 59 | M&L for 75 mm thick PCC1:4:8 type D2 using 40mm graded as in foundation, sub-base of floor, etccomplete all as specified |
| 60 | M&L for 75mm thick cement concrete 1:3:6 type C2using 40mm graded stone aggregate as in floor/ plinth protection finished the surface even and smooth without using extra cement including filling the expansion joints with bitumen filler / filler boards and necessary formwork etc complete all as specified |
| 61 | Dismantling of floor, hearth , or wall tiling including cement mortar bedding ( but not backing )and rubbish off the primeses complete all as specified |
| 62 | M&L for non skidceramic colouredtiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in colouredcement to match with colour of tile over andincluding 15mm thick screed bed or bedding layer in CM 1: 6 complete all as specified |
| 63 | M&L for non skidceramic colouredtiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed incolouredcement to match over and including 15mm thick screed bed in CM 1: 6 complete all as specified |
| 64 | All as per item No 65above but as in skirting/ dado etc with and including 10mm thik backing coat in cement mortar 1:4 an wall complete all as specified |
| 65 | M&L for non –skidceramic colouredtiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exc 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or colouredcement to match over and including 15mm thick screed bed in CM 1: 6 complete all as specified |
| 66 | M&L for scratch free vitrified ceramic tiles10mm thick (square or rectangular) area of each tile not exceeding 0.36 sqm ,in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 15mm thick screed bed or bedding layerin CM 1:6 complete all as specified |
| 67 | All as per item No 66above but as in skirting/ dado etc with and including 10mm thik backing coat in cement mortar 1:4 on wall complete all as specified |
| 68 | M&L for glazed ceramic coloured tiles of size 300x250x7 mm thickon vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match with colour of tileover and including 10 mm thickbacking coat on fair faces of brick work in CM (1:4) complete all as specified |
| 69 | M&L for glazed ceramic coloured tiles of size 450x350x7 mm thick as on vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match over and including10 mm thickbacking coat on fair faces of brick work in CM (1:4) complete all as specified |
| 70 | M&Lfor chequered cement concrete tiles with grey cementand pigment of size 20cm x 20cm x 25mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6complete all as specified |
| 71 | M&L for 18 to 20mm thick Black granite slab of approved quality ofany sizebeddedand jointed in greycement slurry and pointed with white cement with admixture of pigment to match the shade of granite stonelaid over and including 15 mm thick screed bed in CM (1:4) including polishing by usingmechanical grinder and moulding edgesas inrepair complete allas specified |
| 72 | M&Lfor 60mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-35 Gde of approved shape, size and colourconferming to IS 15658-2006 and laid over and including 25mm thick sand cushion as inrepair complete allas specified |
| 73 | S&F in repairprecast cement concrete 1:2:4 type B1using 20mm graded stone aggregateas in kerb and edging to road and footh path, etc including chamfered,weathering, throating etc and setting in CM (1:4)complete all as specified |
| 74 | Demolition of cement concrete in any description and in any position along with tarfelt treatment and cement mortar bedding from roof removal rubbish out side MD land complete all as specified and directed. |
| 75 | M&L forplain cement concrete 1:2:4type B1 using 20mm graded stone aggregate as in leveling course and other works as in roof, kerb, coping, padding etc complete all as specified |
| 76 | M&L for cleaning and removing all dirts and scales from service water tanksand from mouth of circulating pipes etc capacity of tank exceeding 250 litresbut not exceeding 500 litres complete all as specified |
| 77 | All as per item No 76 above but exceeding 500 litresbut not exceeding 1000 litrescapacity complete all as specified |
| 78 | S&F in repair Rotational moulded Polyethylene water storage tank 500 litres capacity (cylidrical vertical with closed top) triple layer hoisted and fixed in position all as specified in SSR part I includingbrass float valve 20mm dia and complete all as specified |
| 79 | All as per item No 78 above but 1000 liters capacity |
| 80 | Taking down and refixing15mm bore old steel tubing and connection in new or old position complete all as specified |
| 81 | All as per item no80 above but 20mm bore |
| 82 | S&F in repair steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc ,for 15mm bore pipes complete all as specified and as directed. |
| 83 | All as per item no 82above but 20mm bore complete all as specified and as directed. |
| 84 | S&F in repair for 15mm bore bib taps chromium platedwith crutch or butterfly handle ,screwed down , screwed for iron pipes or brass ferrulecompleteall as specified |
| 85 | S&F in repairfancy type chromium plated15mm bore bib tap two way cast copper alloy with crutch or butterfly handle, screwed for iron pipe or brass ferrule etc complete all as specified |
| 86 | S&F in repairstop valves fancy type chromium plated with long shanks fixed with 15 mm dia bore pipes complete all as specified |
| 87 | S&F in repair pillar tap (swan neck type) cast copper alloy with capstan head, screwed down ,high pressure with long screwed shanks and fly nuts fixed in 15 mm bore pipes complete all as specified |
| 88 | S&F in repair CP angle stop cock of 15mm bore screwed down for high pressure with crutch or butter fly handle ,screwed both end for iron pipes complete all as specified |
| 89 | S&Fin repair fancy type chromium plated 15mm boretwo way angle valve cast copper alloy with crutch or butterfly handle, screwed for iron pipe or brass ferrule etc complete all as specified |
| 90 | S&F in repair CP mixer for mixing hot & cold water screwed down for ironpipe 15mm borecomplete all as specified |
| 91 | S&F in repairsconcealedstop valves fancy type chromium plated with long shanksand cup fixed with 15 mm dia bore pipes |
| 92 | S&Fin repair 125 mm size chromium plated showerrosewith siwel joint suitable for 15 mm bore GI pipes |
| 93 | S& F in repair CP toilet paper holder |
| 94 | S&F in repair vitreous china wash down water closet pedestalpattern white excluding flushing cistern and flush pipes complete all as specified and as directed . |
| 95 | S&F in repair vitreous china squatting pan `Orissa \" pattern of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipes) including connection to trap and to flush pipe etc and lime concrete bedding including \"P\" or \"S\" trap complete all as specified |
| 96 | M&Lin repairs PVCvalve less,syphonic action type flushing cistern,low level ,white with inlet ball valve,float and handle including bracketsand connection to pipe and fixing of chainand pull or lever if any complete all as specified |
| 97 | S&F in repair water jet spray CP 15 mm bore size along with PVC cord to EWC complete all as specified |
| 98 | S&F in repair health faucet with flexible pipe of one metrelength including wall hook forEWC complete all as specified |
| 99 | S & F in repairs vitreous china wash basin white (oval shaped under counter) of size 550 x 400mm including 32mm brass CP waste coupling complete all as specified |
| 100 | S&F in repairs PVC (SWR) floor trap dia of outlet 75mm bore plain or multi with stainless steel grating includingjoining to waste pipe with solvent cement jointcomplete all as specified |
| 101 | S&F in repairs CP grating 100mm dia including fixing the trap withwhite cement complete all as specified |
| 102 | S&F in repair 600x450mm beveled edge mirror of selected quality glass mounted on PVC framed and fixed to wooden plug with CP screw and CP washer complete all as specified |
| 103 | S&F in repairs Stainless steel sink with drainage board , 1.00mm thick for kitchen, with plug, washers and wastes couplin ,waste pipe etcincluding bedding in cement mortar on to dwarf wallor including fixingcantilever brackets and connecting union to pipe, overall size 915mm x 460mm with bowl size 410mmx 330mmx 160mm fixed complete all as specified and directed. |
| 104 | S&Fstain less steel plate rack for kitchen 1 mm thick of best quality with suitable hanging arrangement and fixed to wall complete all as specified and as directed.Note:- Size of plate rack shallnot be less than 900x1200 mm and weight of rack shall not be less than 8.5 Kg each. |
| 105 | S&F in repairs PVC connection15mm size with PTMT nuts of length 450 mm long complete all as specified |
| 106 | S&F in repairs PVC waste pipe for urinal/wash basin/ sink pipe 32mm bore 65cm long complete all as specified |
| 107 | Dismantling of cast iron / PVCpipes jointed in cement mortar 110 / 75 mm bore all as specified |
| 108 | S&F110mm borePVC (SWR) pipe single socketed in any length with rubber ring joints laid on wall / floor complete all as specified |
| 109 | All as per ser. Item No 108 but except pipe .Note:Serviceable pipe obtained from dismantling shall be used. |
| 110 | S&F 75mm borePVC (SWR) pipe single socketed in any length with rubber ring joints laid on wall / floor complete all as specified |
| 111 | All as per ser. Item No 110but except pipe .Note:Serviceable pipe obtained from dismantling shall be used. |
| 112 | S&FPVC ( SWR) bends any radius 110mm bore |
| 113 | S&F PVC ( SWR) bends any radius 75mmbore |
| 114 | S&F 110mmPVC ( SWR) junction single (single T/Y) equal or unequal |
| 115 | S&F 75mmPVC ( SWR) junction single (single T/Y) equal or unequal |
| 116 | S&F 75mm bore cast iron soil waste and vent pipes in any length with or without ears with lead joints in trenches or in floors including dismantling old pipe complete all as specified |
| 117 | All as per item No 116above but for 100mm bore |
| 118 | S&F in repairsbrass CP tubular towel rail 20 mm dia 60cm long between flange with brackets etccomplete all as specified |
| 119 | S&F 0.50mm thick (including coated thickness) pre-colourpre- profiled (Galvalume/zinkalume) sheets of required colour and design having tensile strength of 550 Mpa asin roof sheeting/sunshade/ wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer / profile maker instruction and dismandling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed. |
| 120 | S&F in repair mild steel work as in tubular trusses, purlins, rafter, tubular column, where connected common rafter and running rails fixed with angle cleat or other connection plates including specially shaped washer etc, complete using ERW or induction butt welded tubes conforming IS-1161-1979 grade ST-240 complete all as specified |
| 121 | S&F in repairs MS framed work as in doors or gates of angle iron, door frame or other section with gusset plate, rails, braces etc complete, drilled for fixing of steel sheeting or other covering etc, to prepared for hanging or sliding with including either hooks and hinges also fastening grills, grating, hold fast of doors and windows chowkat etc, with ends of bars shouldered and or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and fixing and similar work confirming to Fe 290 Gde E-165 complete all as specified |
| 122 | M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth as instone concreteblock or slab wall complete all as specified |
| 123 | M&L for preparation of newlysteel surfaceof any description, over 10 cm in width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide primercomplete. |
| 124 | S&F in repairfor providing PVC spout pipe of 25mm bore & 45cm length in sunken floor including cutting holes in brick walls built in cement mortor and making good the dismantled portion in PCC 1:2:4, type B1using 20mm graded stone aggregate andwall finish at the disturbed portion of external surfaces complete all as specified |
| 125 | M&L for preparation of old decorated plastered surface or un plastered surface of wall including cornice and pillars ofand applying one coat of white wash complete all as specified |
| 126 | M&L for complete removal of exisiting treatment on walls including preparation and applying two coats of white wash complete all as specified |
| 127 | M&L for complete removal of exisiting treatment of any description fromceilingincluding preparation and applying two coats of white wash on the ceiling complete all as specified |
| 128 | M&L for preparation of old decoratedplastered surfaces or un-plastered surfaces of wall and applying one coat of oil emulsiondistemper complete all as specified and as directed . |
| 129 | M&L forpreparation of old decoratedplastered surfaces or un-plastered surfaces of wall and applying twocoats ofoil emulsiondistemper complete all as specified |
| 130 | M&L for complete removal of existing treatment on wall (anynumberof layers) by scrapping with steelscrapper or any other methoad as approved by Engineer-in-Charge and applying two coat of oil emulsion distemperover a coat of primer includingapplying onecoatofJK / BIRLA white wall care putty 1-2 mm thickcomplete all as specified |
| 131 | M&L for preparation of old painted wooden surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified |
| 132 | M&L for preparation of old painted steelsurfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified |
| 133 | M&L for complete removal of existing treatment from steel surface over 10cm in width or girthand applying two coats of synthetic enamel paintcomplete all as specified |
| 134 | M&L for preparation ofold decorated surfaces of wall including cornices and pillar surfaces and applying one coat of cement base paint on wall complete all as specified |
| 135 | M&L for complete removal of existing treatment (any number of layers) on walls scrapping with steel scrapper or any other method as approved by EIC including filling the cavity,priming plaster and other old disturbed surface with alkali resistant priming paint and applying two coats of cement base paint all as specified |
| 136 | M & L for repairingsunken floor by providing waterproofing treatment to sunken floor surfaces of RCC slabby the following specifications complete all as specified and directed :-(a) Provide PCC 1 : 1.5 : 3 type A0using 12.5mm graded stone aggregate in slope of average thickness 50mm on sunken floor slab mixed with and including integral water proofing compoundmanufactured by Dr FIXIT or other equivalent as approved, and finished the surface even & smooth without using extra cement.(b) Rendering 15mm thick in CM 1:3 mixed with & including integral water proofing compound on sunken floor and sides of (Vertical surface) sunken portion.(c) Applying surfaces with bituminous primer (conforming to IS-3384-1965) @ 0.40 Kg/Sqm on sunken surfaces of floor & wall and provide necessary connections to soil/waste pipe from WC/Nahanni trap etc including demolition ,cutting holes and making good the disturbed surface as per existingcomplete all as specified and as directed. (d) Applying two coats oftack coat of Industrial bitumen grade of 85/25 at the rate of 1.2 Kg per Sqm including cleaning surfaces (1st coat for bonding material below membrane and 2nd coat on top of membrane.(e) Laying 3 mm thick APP modified water proofing membrane with 100 mm over laps sealed and bounded to the surfaces by \"torchon\" method.(Note : Floor Area shall be measured for payment). |
| 137 | Supply & providing water proofing roof treatment with polymeric standard water proofing membrane, Aqua flex manufactured by M/s Bengal Bitumen, MULTIPLAS STANDARD, manufactured by STP TEXAS Ltd/ Hyperplas manufactured by IWL Ltd having 10 years guarantee for water tightness including demolition of existing water proofing traetment complete all as specified and described as under:-(a) Preparation of RCC roof surface and applying one coat of polymeric modified bitumen 85/25 @ 1.2Kg/Sqm over a coat of polymeric primer @ 0.30 Kg/sqm including cleaning surface all as per manufacturer\"s specification complete all as specified and directed.(b) Supply & providing water proofing with 3 mm thick APP polymeric proofing membrane of 3Kg/Sqm HYPERPLAS STANDARD/ MULTIPLAS STANDARD consisting of 100 micron HMHDPE film centre core including coating the surface with compatible primer and torch application of membrane with 10cm overlaps as required thereof, complete all as specified and directed (c) Aluminium bituminous paint @0.15 Kg/Sqm shall be applied over the APP membrane surface. NOTE:- The work of water proofing treatment shall be got executed through expert team of manufacturers or authorised applicator of manufacturer. |
| 138 | S & F powder coated aluminium ventilator cross section conforming to IS 63.5x38.10x1.5mm consisting of two partions upper portion shall have louvers with 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56m fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with IDPE rubber gasket including aluminium beads, including preparation of jombs all around in CM 1:3 finishing even and smooth complete all as specified and directed. |
| 139 | M & L for taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key scrubbing down with water etc and rendering 15 mm thick in two layers of10mm and 5 mm thick inCM 1:4 mixed with and including PD Proof 101 LW (+) of Dr fixit or equivalant integral water proofing admixture @ 200ml/bag over and including two coats of super latex 302 of Dr fixit or equivalant in the ratio (1:4:7) , ( one part super latex, 4 part water and 7 parts of cement) @ 1.50kg of homogeneous mixture/sqmand finish the surface even and smooth (without using extra cement) for external wall complete all as specified and directed. |
| 140 | M&L for repairingrolling shutter of size n.exc 4 sqm by aligning guidechanne , easing ,greasing ,repairing lockingarrangements and other fittings , cover etcand make the rolling shutter smooth functioning including applying two coats of synthetic enamel paintcomplete all as specified and directed |
| 141 | S & F Powder coated aluminium sliding glazedwindows with three track shutter sliding (two shutters glazed and one shutterwire mesh) shall be two part as upper patr shall be three movable shutterand lower part consist three shutter (one openable in centre and both side fixed type shutter with frosted glass) with following specification and making good the adjacent side of jombs of windows by plastering in CM1: 3 even and smooth complete etc . shifting of existing cooler stand where required complete all as specified and as directed by Engr-in-charge.(i)Windows frame of cross section 101mm x 44mm x 1.5mm thick. (Min)(ii)Three way track for sliding shutters of cross section91.8mm x 31.75mm x1.1mm thick.(Min)(iii)Sliding shutter frame of cross section40 x 18 x 1mm thick.(Min)(iv)4 mm thickglass superior quality.(Min)(v) IDPE Rubber guasket for fixing of glass.(vi)Locking cleats per shutter -01 Nos.(Min)(vii)Sliding rollers per shutter - 02 Nos.(Min)(viii) Stainless steelwire cloth 0.30mm nominal dia of wire and average width of aperture 1.40mm for shutters 01 Nos.(Ix)fixing screw for frame with wall per windows- 08 Nos. |
| 142 | S&F aluminium coloured power coated door shutters and frame , aluminium section weighing minimum 0.55 Kg/m including necesssary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door, pad lock, hinges, anodised aluminium snap beading screws etc 4.8 mm thick plain or tinted glass, ordinary quality including rubber gasket for packing and fixed to aluminium doors/window/partition includingnecessary cutting / moulding and chamferring of edges including taking down of exiting almuminium shutter with frame of any description complete all as specified and directed. . |
| 143 | S&F in repair aluminium (extructed section) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutter and fixed complete all as specified |
AI Tender Summary
Tender Timeline
May 16, 2024
11:30 IST
Tender Published
Tender notice published.
Completed
May 16, 2024
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
May 23, 2024
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedMay 23, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 25, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender