|
| 1 | EQUIPMENT - COLUMNS/TRAYS |
| 2 | DE-SALTERS/DE-HYDRATOR/ELECTROSTATIC COALESCER/HEATER- TREATER |
| 3 | Erection of Desalters/Dehydrator/Electrostatic Coalescer/Heater-Treater |
| 4 | Transportation of Desalters / Dehydrator / Electrostatic Coalescer / Heater-Treater from Owner\"s storage points to work site/contractor\"s stores, erection of the Desalters / Dehydrator / Electrostatic Coalescer / Heater- Treater Vessels on foundations at grade, levelling, aligning, grouting (including supply and application of non- shrinking Grout when necessary) and completing the work in all respects as per drawings, specifications and instructions of Engineer-in-Charge. |
| 5 | Equipment weighing less than 500 MT but 100 MT and above |
| 6 | Installation of following Internals inside / outside the Desalter / Dehydrator / Electrostatic Coalescer / Heater Treater as per drawings and specifications including Transportation of internals from Owner\"s storage points to work site/contractor\"s stores and completing the work in all respects as per instructions of Engineer-in-Charge. |
| 7 | Electrode assembly including Insulator and entrance bushing |
| 8 | Miscellaneous internals & platform etc. |
| 9 | Mix Valve |
| 10 | Power units (Transformers) |
| 11 | Control panels |
| 12 | Ejector System Package |
| 13 | ERECTION OF THE EJECTORS IN EJECTOR SYSTEM PACKAGE |
| 14 | Transportation of the Ejectors from Owner\"s storage points to work site and Erection on structure support by bolting, shims etc. including levelling, aligning including connecting nozzles with piping at various elevations and completing the work in all respects as per drawings, specifications and instructions of Engineer-in-Charge. |
| 15 | Equipment weighing less than 30 MT but 10 MT and above |
| 16 | Equipment weighing less than 10 MT |
| 17 | ERECTION OF THE CONDENSERS/EXCHANGERS IN EJECTOR SYSTEM PACKAGE |
| 18 | Transportation of the condensers/Exchangers from Owner\"s storage points to work site, preparation of foundation, installation of base plates, erection at various elevations on foundation/supporting structure, levelling, aligning, grouting, fixing of foundation bolts, stacking of multitier exchangers (which are stored in unstacked condition) by assembling using gaskets, bolting, shims etc., enabling works as required and completing the work in all respects as per drawings, specifications and instructions of the Engineer-in-Charge. |
| 19 | Equipment weighing less than 100 MT but 50 MT and above |
| 20 | Equipment weighing less than 50 MT but 30 MT and above |
| 21 | Equipment weighing less than 30 MT but 10 MT and above |
| 22 | ERECTION OF THE LRVP (LIQUID RING VACUUM PUMP) ASSEMBLY (SKID MOUNTED) IN EJECTOR SYSTEM PACKAGE |
| 23 | Transportation of the LRVP assembly skid from Owner\"s storage points to work site, preparation of foundation, installation of base plates, erection at various elevations on foundation/supporting structure, levelling, aligning, grouting, fixing of foundation bolts including connecting nozzles with piping at various elevations and completing the work in all respects as per drawings, specifications and instructions of Engineer-in-Charge. |
| 24 | Equipment weighing less than 30 MT but 10 MT and above |
| 25 | EQUIPMENT - PACKAGE |
| 26 | INSTALLATION OF EQUIPMENT : Handling and transportation of Equipment from Owner\"s storage point to work site/contractor\"s stores. Assembly of subassemblies, placing the equipment on foundations / structures, levelling, aligning, fixing of foundation bolts, providing (including supply) packing/shim plates, chipping and dressing of foundations, grouting (inclduing supply and applications of grout material), cleaning and flushing of equipment with water, draining and drying with compressed air, erection of inter- connecting piping including some amount of cutting and welding, wherever required. Purging the line with air/gas, providing manpower for carrying out pre- commissioning, commissioning and testing under the supervision guidance of Manufacturer\"s/Owner\"s personnel and rectifying defects, if any and completing the work in all respects as per drawing(s), specifications, scope of work and instructions of engineer in charge for each equipment including drives and accessories listed below : |
| 27 | Filters (For details, refer Doc No. B269-999-80-42-SOW-3001-A2) |
| 28 | Coalescers (For details, refer Doc No. B269-999-80-42-SOW-3001-A2) |
| 29 | EQUIPMENT - ROTATING |
| 30 | Handling and transportation of Rotating Equipment & miscellaneous items of equipment package from Owner\"s storage points to work site / contractor\"s stores, assembly of sub-assemblies, field assembly (as applicable) placing the equipment on foundations, (including some amount of cutting, welding & field joints wherever required), levelling, aligning, fixation of foundation bolts, providing (including supply) packing / shim plates (as applicable), including chipping & dressing of foundations, grouting (including supply and application of grout material, equipment base frame filling as per vendor recommendation with specified grout), cleaning and flushing, draining and drying, purging of lines, and providing manpower and tools / equipment for NDT, testing, carrying out trial and start-up runs and testing under supervision of manufacture\"s / customer personnel, rectifying defects (if any), insulation (as applicable), precommissioning and commissioning (as applicable) and completing the work in all respects as per drawings, job specifications / scope of work and instructions of Engineer-in-charge for each equipment including drivers and accessories, as listed below.NOTE : Scope also includes erection, fabrication, insulation (as applicable), welding & field joints wherever required, installation & NDT of vendor supplied |
| 31 | Pump Packages (all types) with drivers, auxiliaries and accessories. |
| 32 | All Types of Pumps (Electric Motor Driven) along with driver, auxiliaries and accessories (Single Skid). |
| 33 | Chemical Dosing Packages |
| 34 | Skid mounted chemical dosing packages along with all auxiliaries and accessories. |
| 35 | EQUIPMENT - STATIC |
| 36 | EQUIPMENT ERECTION |
| 37 | EQUIPMENT ERECTION:Transportation of reactors, columns, vessels, silencers, heat exchangers (shell and tube, plate fin, plate) and electric heater etc. from owner\"s storage point to work site, assembly of parts, subassemblies, erection at all elevations, aligning, verticality checking, grouting, tightening of foundation bolts, welding of washer on anchor chairs, erection of wooden pillow for cold equipments, stacking of multi-tier exchanger (which are stored in unstacked condition), arranging hooks for test ring/ test flanges in heat exchangers, installation of demister, internal gratings, distributor, pipe davit, installation of mixer/agitator, cleaning and flushing by water, draining, drying by compressed air, arranging all tools, tackles, machinery, consumables, transportation equipment, erection equipment, instruments, labour, ancillary, etc. to complete the work in all respects as per drawings, equipment detail, specifications and instructions of the Engineer-in-Charge. |
| 38 | Equipment weighing less than 500 MT but 100 MT and above |
| 39 | Equipment weighing less than 100 MT but 50 MT and above |
| 40 | Equipment weighing less than 50 MT but 30 MT and above |
| 41 | Equipment weighing less than 30 MT but 10 MT and above |
| 42 | Equipment weighing less than 10 MT |
| 43 | ERECTION OF DRESSED-UP EQUIPMENT: Transportation of columns and vessels from owner\"s storage point to work site, dressing up of the column/vessel by contractor , assembly of parts, subassemblies, erection at all elevations, aligning, verticality checking, grouting, tightening of foundation bolts, welding of washer on anchor chairs, arranging all tools, tackles, machinery, consumables, erection of completely dressed-up equipment, & arranging all instruments, labour, ancillary, etc to complete the work in all respects as per drawings, equipment detail, specifications and instructions of the Engineer-in-Charge.Dressing up of column(As applicable as per the requirement of the tender): Supply/Application/installation of insulation, installation of ladders and platforms, installation of piping spool and support (wherever applicable), installation of demister, internal gratings, distributor, pipe davit etc on the Column/Vessel, cleaning and flushing by water, draining, drying by compressed air etc to complete the job in all respects as per the requirements of the specifications & standards attached else where in the tender. |
| 44 | Equipment(Dressed-up) weighing less than 500 MT but 100 MT and Above |
| 45 | ERECTION OF BURIED EQUIPMENT :Transportation of vessels from Owner\"s storage point to worksite, repair/ touch up of finish paint, arrangement of all accessories, equipments, labour etc., placing/erection of vessel in trenches/pits including assembly of parts, subassemblies, aligning, verticality checking, grouting, tightening of foundation bolts, arranging all tools, tackles, machinery, consumables etc to complete the work in all respects as per drawings, equipment detail, specifications and instructions of the Engineer-in-Charge. |
| 46 | Equipment weighing less than 50 MT but 30 MT and Above |
| 47 | Equipment weighing less than 30 MT but 10 MT and Above |
| 48 | ERECTION OF AIR COOLERS (AFC) - MODULAR CONSTRUCTION:Transportation of air cooler modules (Consisting Tube bundles / Sections / Bays, Motors, Fans, Plenum chambers etc.as a single unit) and bottom segments of structural columns (dispatched as loose by others) and other loose items (if any) from Owner\"s storage points to erection site, erection / assembly of bottom segment of structural columns, assembly of parts & sub-assemblies, erection at all elevations, aligning, verticality checking, grouting, tightening of foundation/ anchor bolts, lifting the modules and placing the same on bottom columns using the lifting lugs, removing the temporary bracing and installing the permanent bracings, installation of ladder, staircase, handrails and platforms all around, matching of TOG level of platforms as mentioned in respective datasheets, laying cables, installation of junction boxes, trial run of one bay for each tag number after erection, ensuring vibration free operation, carrying out necessary modification required in case of any vibration, arranging all tools, tackles, machinery, consumables, transportation equipment, erection equipment, instruments, labour, ancillary, etc. to complete the work in all respects as per drawings, equipment detail, specifications and instructions of the Engineer-in-Charge. |
| 49 | Equipment/AFC module weighing less than 50 MT but 30 MT and Above |
| 50 | Equipment/AFC module weighing less than 30 MT but 10 MT and Above |
| 51 | OTHER THAN ALREADY ERECTED STRUCTURAL Transporting, Assemblingand Erecting in position Bolted and/ or Welded already fabricated Structural Steel works (of any Grade) at all levels & locations, comprising of Rolled/ Built-up sections made of Joists, Channels, Angles, Flats, Rounds, Plates cut and/ or bent to any shape and size, in Beams, Girders, Trusses Columns, Brackets, Bracings, Ladders (with or without Cage), Safety Chain Brackets, Staircases, Handrailings and Platforms of any shape and size (including Chequered plates/ Gratings) on vertical and/ or horizontal equipments, in miscellaneous valve operating platforms, pipe supports etc, fixing in line and level with temporary staging and removal of the same after erection, grouting below base plates with Free Flow Non shrink/ ordinary Grout as specified to bring them to required levels, all complete as shown, specified and directed.ALREADY FABRICATED STRUCTURAL STEEL SHALL (WITH CONNECTION BOLTS) WILL BE PROVIDED TO CONTRACTOR FREE OF COST. SUPPLY OF ALL OTHER MATERIAL IN CONTRACTOR\"S SCOPE. |
| 52 | \"NOTE:-THE ABOVE RATE SHALL BE INCLUSIVE OF ALL TAXES & DUTIES, ROYALTIES, CESS, FEE, ENVIORMENTAL & POLLUTION, FITNESS & SAFETY CLEARANCE CHARGES (IF ANY), OR ANY OTHER INCIDENTAL CHARGES ETC BUT EXCLUDING GST.\" |
