Military Engineer Services-MES has published Tender For Certain Repairs To Joinery Plumbing Flooring Hard Standing Pathway Retaining Wall Drains Fencing Including Periodical Services And Other Misc Works In Rr Units At Arnora Sarna And Suigarh Area And Also Certain Repairs Maintenance To Sewage. Submission Date for this Tender is 18-05-2024. Footpath Work Tenders in Udhampur Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| 3d0f393c-2fc6-4c9b-8f25-81f88a97dda0.html | Tender Notice | 0 KB |
| BOQ_729055.xls | Tender Document | 0 KB |
| Tender.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone masonry built in cementmortar including all quoins, pillars etc. but excluding ashlars facing, dressed stone work and precast concrete articles complete all as specified and directed. |
| 2 | M&L for walling of random rubble stone masonry, well bonded, bedded and solidly hearted built in cement mortar 1:6, brought up to courses, complete all as specified and directed. Note : Quantity of PCC bond stones will be deducted if used in lieu of stone bond stones. |
| 3 | All as per the description of Serial Item No "2.00" here-in-before but except stones i.e. using serviceable stones obtained from Serial Item No "1.00" complete, all as specified and directed. |
| 4 | M&L for pre-cast cement concrete, 1:3:6 type C-1 (using 20mm graded crushed stone aggregates)as in bond stone set in cement mortar 1:6 and finishing exposed surfaces including necessary form work,complete all as specified & directed. |
| 5 | Raking out joints / poiting to random rubble or polygonal rubble uncoursed or brought upto course work built in cement mortar, complete all as specified & directed. |
| 6 | Raised pointing to random or polygonal rubble , uncoursed or brought upto courses in cement mortar 1:4, complete all as specified & directed. |
| 7 | M&L plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in cills, lintels upto 1.5 metre clear span, steps, seismic and other similar band, plinth course, string courses, lacing courses, parapets and railing upto 60cm in height, copings, kneelers, apex stone, bed plates, kerbs etc and in similar works including weathering, slightly rounded or chamfered angles and throating and necessary form work complete, all as specified and directed. |
| 8 | S&F PVC (SWR) pipe 110mm bore single socketed in any length as in weep holes complete all as specified and directed. |
| 9 | M&L Boulder filling dry, hand packed tightly, gauge exceeding 80mm not exceeding 150mm, as in back filling of retaining wall complete all as specified and directed. |
| 10 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above gound level) complete all as specified and directed. |
| 11 | M&L for 100 mm thick PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sub base floor, complete all as specified and directed. |
| 12 | M&L for 50 mm thick PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in floors, hardstanding etc, finishing surface even and smooth without using extra cement including use and waste of formwork to divide the area into panels, complete all as specified and directed. |
| 13 | M&L for 75mm thick plain cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection etc, finishing surface even and smooth without using extra cement incl making joints with bitumastic filling in proportion of bitumen and sand 1:3 by weight complete all as specified and directed. |
| 14 | M&LPCC 1:3:6,type C-2 (using 40 mm graded stone aggregate) as in sub base floor complete all as specified and directed . |
| 15 | M&L for factory made (rectified) precast concrete rubber moulded designer chequered tiles any colour, shape and size not less than 20 cm x 20 cm x 25mm thick(compressive strength not less than 250 Kg/Sqm), set, jointed and pointed with grey cement and pigment over and including 20mm thick CM 1:6 screed bed or bedding layer complete all as specified and directed. |
| 16 | M&L for 80 mm thick machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of M-40 Grade with grey cement and pigments complete all as specified and directed. |
| 17 | M&L for 25mm thick sand cusioning layer under interlocking paver block complete all as specified and directed. |
| 18 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 19 | M&L PCC 1:3:6, type C-1 (using 20mm graded aggregate) as in surface channels and drainscomplete all as specified and directed. |
| 20 | Demolition of cement concrete (reinforced)of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 21 | M&L for providing reinforced precast cement concrete type B1 (1:2:4) 20mm graded stone aggregate as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles set in cement mortar ( 1:6 )complete all as specified and directed. |
| 22 | M&L for 10mm dia and over TMT bars, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 23 | Dismantling posts or struts embedded in concrete (wood, steel or RCC) any section including taking out embedded portion and making good disturbed ground complete all as directed at site. |
| 24 | Excavating in post holes ( or similar holes) each n.exc 0.5 Cum getting out hard/dense soil returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm complete all as directed at site. |
| 25 | M&L for cementconcrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in foundation , filling and mass concrete surface completeall as specified and directed. |
| 26 | S&F Mild steel work in posts and struts in fencing including cutting tops to shape as directed including drilling holes, notching for wire etc. flat iron fillets (for securing wire mesh etc.), necessary drilling, bolting or riveting,conforming to Fe-290 grade E-165, complete all as specified and directed. |
| 27 | S&F for diameter of neck in 11 to 15 mm mild steel screws bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut , exc 5cm but n.exc 10 cm longcompleteall as specified and directed. |
| 28 | M&L for mild steel TMT bars 10mm dia and over , as in stiffner to hold the chain link fencing fixed with angle iron post,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 29 | Dismantling fencing wire mesh, any type (Chain link fencing, GI mesh etc.) complete all as specified and directed. |
| 30 | Supply only chain link fencing of 3.15mm dia galvanised steel wire, conforming to IS : 2721-2003 including line wires, straining bolts, binding wire etc., complete all as specified and directed. |
| 31 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc., including provision of binding wire, complete all as specified and directed. |
| 32 | Dismantling galvanised barbed wire any description and in any positioncomplete all as specified and directed. |
| 33 | S&F Galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolt including securing or tying at crossing with and provision of galvanised mild steel wire staples or steel pins etc as directed complete all as specified and directed. |
| 34 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exc 1.5 Sqm eachcomplete all as specified and directed. |
| 35 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqmbut n.exc 4 Sqm eachcomplete all as specified and directed. |
| 36 | Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m eachcomplete all as specified and directed. |
| 37 | S&F30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 38 | S&F35 mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); fitted to chowkats complete all as specified and directed. |
| 39 | S&FSolid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 40 | S&FFactory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 41 | S&F 150 mm long Aluminium anodised,handle of extruded section cast type anodised and fixed complete all as specified and directed. |
| 42 | S&F 200 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 43 | S&F 250 mm long Aluminium alloy ,anodised sliding door bolts with hasp staple (bolt type) and fixing clips of sheet, cast or extruded section and fixed bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 44 | S&F butt hinges 100mm long, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed,complete all as specified and directed. |
| 45 | S&F100 mm long Butt hinges, medium weight, cold rolled mild steel and fixed, complete all as specified and directed. |
| 46 | S&F aluminium powder coated sliding windows with three sliding pane , two of glass and one of wiremesh , shutter glazing with and including 4 mm thick tinted glass fixed with rubber gasket with aluminium beading, clips, frame, with duco pattern grill of size 75mm x75mm and steel mosquito wire netting fixed with beading made with aluminium section suitable for three track slides including making good of wall surfaces to match with existing surfacescomplete all as specified and as directed. |
| 47 | S&F alluminium alloy anodised door frame fixed with side hung shutters and glazing fixed with and including 4.80 mm thick tinted glass fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed :- (a) Frame 65x38x1.60mm thick with rawl plug (b) Middle and lock rail : 150x44x1.6mm thick (c) Bottom rail : 150x44x1.6mm thick (d) Top rail/sype : 85x44x1.6mm thick (e) Aluminium beading : 0.7mm thick (f) Aluminium handle D type 150mm long, 100 mm long steel butt hinge, aluminium tower bolt 9.9mm dia shoot 200mm long brass mortice lock 100mm 4 leaver ,aluminium stopper,hydraulically regulated door closer( Make Sandhu ISI marked or ites equivalent approved make) (g) Making good of wall surface to match with existing surface complete. |
| 48 | S&Fstainless steel wire cloth 0.36 mm nominal dia of wire and average aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 49 | Dismantling wrought iron or mild steel work of any description not otherwise specifically provided for, complete all as specified and as directed. |
| 50 | S&Fmild steel work in framed work such as grills, gratings, framed guard bars, ladders etc. with ends of barsshouldered and / or riveted or forged into spikes, and similar work confirming to Fe 290.Gde-E-165 compelete. |
| 51 | Taking up or down steel tubing 15 mm bore and connection including cleaning for refixing complete all as specified and directed. |
| 52 | Fixing only old serviceable 15 mm GItubing and connection in new or old position (wall, ceiling or floor etc.) including necessary fittings & fixtures etc. complete all as specified and directed |
| 53 | S&F15 mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed. |
| 54 | Taking up or down steel tubing 20 mm bore and connection including cleaning for refixing complete all as specified and directed. |
| 55 | Fixing only old serviceable 20 mm GItubing and connection in new or old position (Wall, ceiling floor etc.) including necessary fittings & fixtures etc. complete all as specified and directed |
| 56 | S&F20 mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed. |
| 57 | S&Fin repair 15 mm bore bore Bib taps cast copper alloy chromim plated fancy type ,screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 58 | S&Fin repair stop valve 15 mm dia, cast copper alloy,CP fancy type with screwd down,high pressure,screwed both ends for iron pipes or for unions and fixed in pipe all as specified and directed. |
| 59 | S&F pillar tap 15 mm dia cast copper alloy with capstan head chromium plated fancy type, screwed down high pressure, screwed for iron pipe and fixed complete all as specified and directed. |
| 60 | S&Fin repair 20 mm bore gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 61 | S&F in repair,600 mm long PVC Connection 15mm size with PTMT nutscomplete all as specified and directed. |
| 62 | S&F in repair, Soap dish chromium plated any size fixed to plugs with chromium plated brass screws and wooden/ plastic cleats complete all as specified and directed. |
| 63 | S&F in repair tubular towel rail brass chromium plated 20mm dia , 60 cm long between flanges complete all as specified and directed. |
| 64 | S&F in repair, Vitreous china wash hand basin 550 x 450mm, white flat back including cast iron bracket, cutting for and pinning the ends of brackets or erecting on stand including 32mm bore brass chromium plated waste coupling with long screwed shank and fly nuts, PVC flexible waste pipe of bore 32mm and adequate length complete all as specified and as directed. |
| 65 | S&F , in repair Vitreous china squating pan, Orissa Pattern, size 580 x 440 mm white with integral foot rests and PVC P or S trap (excluding flushing cistern and flushing pipe ) including connection to trap & flushing pipe etc complete including making good to floor complete all as specified and directed. |
| 66 | S&F in repair,Vitreous China wash down water closet pan (pedestal pattern),white (excluding flushing cistern )including connection to drain (or outgoing pipe) and to flushing pipe , antisyphonage pipe , pvc cover sheet in same colour etc complete all as specified and directed. |
| 67 | S&F in repair, Vitreous china bowl urinal flat back size 430X370X340 with grating and union for discharge pipe (excluding flushing cistern ,flush pipe and waste pipe) complete all as specified and as directed. |
| 68 | S&Fin repair 10 litre capacityPVC valveless, Syphonic action type, fluhing cistern low level,white with inlet ball valve, float and handle, flush pipe etc complete all as specified and directed. |
| 69 | S&F in repair, Brass CP wash basin mixer 15mm bore dia for mixing Hot or Cold water screwed down for iron pipe and fixed all as specified and as directed. |
| 70 | S&F in repair,Brass CP wall mixer 15mm bore dia for mixing Hot or Cold water screwed down for iron pipe and fixed all as specified and as directed. |
| 71 | S&F in repair, water jet for EWC chromium plated with PVC connectioncomplete all as specified and directed. |
| 72 | S&F in repair,hand shower (health faucet) 1 mtr PVC tube with wall hook complete for EWC,all as specified and directed. |
| 73 | S&Fin repair, 600mm X 450mm bevelled edge mirror of slected quality glass mounted on 6 mm thick AC building boardor commercial plywood and fixed to wooden plug with chromium plated brass screws and cup washers complete all as specified and directed. |
| 74 | S&Fin repair, 110mm bore PVC (SWR) pipessingle socketed in any length with rubber ring joints, laid in trenches or in floors complete all as directed. |
| 75 | S&Fin repair, 75mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 76 | S&Fin repair,75 mm bore dia PVC floor trap (SWR) plain with grating including jointing with solvent cement to waste pipe complete all as specified and directed. |
| 77 | S&Fin repair, 110mm PVC (SWR) bends any radious complete all as specified and directed. |
| 78 | S&Fin repair, 75mm PVC (SWR) bends any radious complete all as specified and directed. |
| 79 | Taking down cement plaster any description on brick or stone wall/ceiling etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 80 | M&L for rendering 15mm thick in cement mortar1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified. |
| 81 | M&L for preparation of new plastered surfaces of wallsand applying two coat of cement base paint over priming plastered and other surfaces with alkali resistant complete all as specified and directed. |
| 82 | M&L for preparation of old plastered or unplastered decorated surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, mass and efflorescent salts and trading oil and greasy spots and applying one coat of cement base paint on walls including cornices etc complete all as specified and directed. |
| 83 | M&L for preparation of old plastered or unplastered decorated surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, mass and efflorescent salts and trading oil and greasy spots and applying one coat of oil emulsion distemper white or tinted on walls including cornices etc complete all as specified and directed. |
| 84 | M&L for preparation of old painted steel surfaces of any description not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint in camouflage pattern, complete all as specified. |
| 85 | M&L for preparing of new wooden surfaceexceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
| 86 | M&L for preparing of new steel surfaceexceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 87 | Excavating in trenches, not exceeding 1.5metre wide and not exceeding 1.5metre depth for foundation, or for shafts, wells, cesspits, manholes, pier holes etc. and not exceeding 10 Sqm on plan and getting out in any type of soil, complete all as specified and directed. |
| 88 | Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar internal dia of pipe 150 mm complete all as specified and directed. |
| 89 | M&L for concrete bed to drain pipes (150 dia) including packing under, and haunching against the sides of pipes after they are laid and tested in cement Concrete 1 : 3 : 6 type C-2 complete all as specified and directed. |
| 90 | M&L Salt-glazed stoneware drain pipes 150 mm internal dia laid in trenches and jointed as specified |
| 91 | M&Lfor reinforced concrete pipes, class NP2,150 mm internal dia laid and jointed complete with collars all as specified and directed. |
| 92 | M&L for brick work with sub class "B" bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 93 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick any type of soil, complete all as specified and directed. |
| 94 | Removing excavated soilsto a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. |
| 95 | Cutting into existing manholes for connecting new drains , making good to pipe and rendering , cutting out existing benching for and forming branch channel ( 1/2 round or 3/4 section) in cement concrete 1:2:4, type B-1 smooth finished and reforming benching as required for 150mm bore pipe, complete all as specified and directed. |
| 96 | Cleaningthe blockage in IWC, EWC including CI pipe after opening the oval access door of CI bend , chamber including replace the broken chamber cover etc in position and removing the rubbish to a distance n.exc 50 mtrall as specified and directed. |
| 97 | Cleaning / clearing of chocked sewage line (including manholes) 100mm to 150mm bore of any description, underground at any depth, removing any type of blockage including desilting, descaling & de-chocking of drains as well as manholes with combined high pressure rodding and flushing after clearing of manholes, including removing the sludge in the tank to a place outside cantonment at the place meant for the purpose by local municipality, all as directed by Engineer-in-Charge. |
| 98 | Dewatering / pumping/ bailing out of contaminated water from septic tank/soakage wells alongwith inlet / outlet chambers, manholes, soakage pits etc. of any capacity after plugging the incoming sewage lines by suction (vaccum) type machine mounted on LCV facility of high pressure vaccum including removing the contaminated water in same tank to a place outside the defence land complete all as specified and directed. |
| 99 | Desludging of sludge from septic tank by manually / mechanically alongwith inlet / outlet chambers, manholes etc. of any capacity after plugging the incoming sewage. Removing of sludge to outside the defence landand burying the same in newly excavated pit of suitable size and covering the same with 25 cm thick layer of earth and spreading bleaching powder over the covered area, complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
