Tender For Comprehensive Maintenance And Allied Services At Inf Bn No 1 Under Age Br Ii Of Ge Brichgunj Port Blair, Port Blair-Andaman And Nicobar Islands

Tender For Comprehensive Maintenance And Allied Services At Inf Bn No 1 Under Age Br Ii Of Ge Brichgunj Port Blair-- 1 Taking down chowkats or frames with shutters area n.exc 1.5 Sqm each(without taking off shutters from the frame) complete all as specified and as directed by Engineer -in-Charge. 2 Description all as per Item No. 1 hereinbefore but are exceeding 1.5 Sqm but n.exc 4.00 Sqm complete all as specified and as directed by Engineer -in-Charge. 3 Taking down shutters of any description n exc 1 Sqm each and refixing in same opening including taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc. complete all as specified and as directed by Engineer-in-charge. 4 Taking down shutters of any description exc 1 Sqm and n exc 2 sqm each and refixing in same opening including taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc. complete all as specified and as directed by Engineer-in-charge 5 Supply and fix 2nd class hardwood, plain, solid, straight chowkats and frames wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and as directed by Engineer -in-Charge. 6 Supply and fix 2nd class hard wood 35 mm thick, plain, framed, panelled shutter ( any number of panels) with panels of timber flat on both sides ( feather edged), or ofveneered particle board medium density, wood particle board with commercial face veneers, the sizes of members of shutters shall be specified and as directed by Engineer-in-Charge. 7 Supply and fix 2nd class hard wood 30mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc, divided into squares with plain, chamfered or rounded, mitred and rebated sash bars any numbers edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass guaze etc complete all as specified and as directed by Engineer -in-Charge. 8 Materials and labour for preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer -in-Charge. 9 Materials and labour for preparation of old steel surface of any description over 10cm width or girth and applying one coats of synthetic enamel paintcomplete all as specified and directed. 10 Materials and labour for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. 11 Materials and labour for one coat of synthetic enamel paint on old painted wood/wood based surfaces exceeding10 cm width or girth including preparation of surfaces complete all as specified and directed by Engineer-in-Charge. 12 Supply and fix solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing in SSR complete all as specified and directed by Engineer -in-Charge. 13 Supply and fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC `C channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVCsheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVCsheet beading, and joinedtogetherwith solvent cement, supplying & fixing in the frame at site as per specification & drawing in SSR complete all as specified and directed by Engineer -in-Charge. 14 Supply and fix for Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed 15 Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. 16 Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified 17 Supply only 4mm thick sheet glass ordinary quality and glazing with rubber packing around the glass, in squares n. exc 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-charge. 18 Supply only 4mm thick figured glass ordinary quality and glazing with rubber packing around the glass, in squares n. exc 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-charge. 19 Supply only 12 mm thick Prelaminatd particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination and fixed to aluminium frames complete all as specified and as directed by Engineer -in-Charge. 20 Supply only 4mm thick ACP board (Aluminium composite panel) fixed to aluminium frames complete all as specifed and as directed 21 Supply and fix in repairs 12 mm thick Prelaminatd particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination and fixed to aluminium frames complete all as specified and as directed by Engineer -in-Charge. 22 Supply onlyaluminium alloy wire mesh 0.45mm nominal dia of wire and average width of apeture 1.4mm all as specified and as directed by Engineer-in-charge. 23 Supply and Fix in repairs aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of apeture 1.4mm fixed with aluminium wire staples etc.complete all as specified and as directed by Engineer-in-charge. 24 Supply and fix in repairs 18/19mm thick prelaminated particle board, exterior grade, prelaminated on both sides with decorative choice lamination fixed with beeding as in pelmet box, complete all as specified and directed by Engineer-in-Charge. 25 Supply and fix sheet glass ordinary quality and glazing with oil putty /wdn beads in square n.exc.0.50sqm in each pane 4 mm thick plain glass on new or old windows incl hacking out old complete all as specified and directed by Engineer-in-Charge. 26 Supply and fix Figured glass, pin headed type ordinary quality and glazing with oil putty /wdn beads in square n.exc.0.50sqm in each pane 3 mm thick plain glass on new or old windows incl hacking out old complete all as specified and directed by Engineer-in-Charge. 27 Supply and fix Butt hinges, 100mm lengthB-21 type extruded stainless steel with galvanised mild steel hinge pin, anodised and fixed , complete all as specified and directed by Engineer-in-Charge. 28 Supply and fix Butt hinges, 75mm lengthC-22 type extruded stainless steel with galvanised mild steel hinge pin, anodised and fixed , complete all as specified and directed by Engineer-in-Charge. 29 Supply and fix 300mm aluminium alloy, anodised, sliding door bolt with hasp & staple (Bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section of cast aluminium alloy complete all as specified and as directed by Engineer -in-Charge. 30 Supply and fix 150mm long aluminium, anodised barrel tower bolt of extruded section, complete all as specified and as directed by Engineer -in-Charge. 31 Description all as per item 31 hereinbefore but 100mm long. 32 Supply and fix 150mm size handle extruded aluminium alloy anodised, fabricated type, complete all as specified and as directed by Engineer -in-Charge. 33 Description all as per item 33 hereinbefore but 100mm long. 34 Supply and fix decorative/fancy designer draphery rod 20 to 25mm dia fixing to wall with suitable brackets etc complete all as specifed and directed. 35 Supply and fix decorative/fancy designer brackets suitable for decarative draphery rods 20 to 25mm dia etc complete all as specified and as directed. 36 Taking down cement plaster of any description incl raking out joints, hacking for key, scrubbing down with water, etc all as specified and as directed by Engineer-in-Charge. 37 Materials and labour rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finishing the surface even and smooth without using extra cement, complete all as specificed and as per directed by Engineer-in-Charge. 38 Materials and labour for rendering 5 mm thick in CM 1:3 finished even and smooth without using extra cement on ceiling including cement slurry 3 kg/sqm complete all as specificed and as per directed by Engineer-in-Charge. 39 Materials and labour rendering 5mm thick in CM 1:4 with using water proofing compound over and including10mm thick in CM 1:6 on external surfaces of block masontry even and smooth without using extra cement, complete all as specificed and as per directed by Engineer-in-Charge. 40 Materials and labour for removing loose and broken concrete by chiselling /picking etc upto a depth of 10 to 20 mm from floor/roof slab/chajjasand similar structural members cleaning the dismantled portion with wire brushes etc to remove dust, dirt and other foreign particles including necessary scaffolding etc and removal of debris to a distance not exceeding 50m, complete all as specified and as directed by Engineer -in-Charge. 41 Materials and labour for application of high build polymer modified cement mortar (1:2.5) mixed with 3 kg SBR per bag of cement in ceiling surfaces 10 to 20mm thick in two layers surfaces over a coat of bonding agent Nito Bond SBR (1 Ltr SBR + 1 Ltr) water + 3 kg cement), complete all as specified and as directed by Engineer -in-Charge. 42 Materials and labour for removing loose and broken concrete by chiselling /picking etc upto a depth of 50 to 100 mm from columns, beams and similar structural members cutting edges cleaning the dismantled portion with wire brushes etc to remove dust, dirt and other foreig 43 Materials and labour for applying one coat of anti corrossive primer @ 0.25 Lit/Sqm for the steel area to exposed old and new reinforcement to the full circumfrance and length of bars to form unbroken 40 Micron thick film all as specified and directed by Engr-in-Charge. 44 Materials and labour for applying one coat epoxy bonding agent @ 2.6 sqm/lit oras per manufactures instruction to old concrete surfaces all as specified and directed by Engr-in-Charge to surfaces of columns, beams and similar structural members all as specified 45 Materials and labour for non shrink, cementitous micro concrete mixed with 12.5 graded stone aggregate using Renderoc RG or equivalent as approvedby GE(18 Kg Aggregate : 25 Kg Renderoc RG) respectively (as per manufatures instruction) laid in average thickness 50 to 100 mm in situ incl formwork, completee all as specified and directed 46 Materials and labourfor spraying curing compound as per manufactures instruction on freshly cast concrete surfaces all as specified.Make : Concure WB white of Fosroc or equivalent as approved by GE. 47 Materials and labour for drilling holes in slabs/wall/column/beams for anchor steel reinforcement incl washing with water, inserting lock setP in the holes and all as specified and directed by Eng-in- Charge.Make : Lock set P of Fosroc or equivalent as approved by GE 48 Demolition of RCC infins, fascia column edges including cutting reinforcement etc, complete all as specified and as directed by Engineer -in-Charge. 49 Use and waste of Form work to flat surfaces of RCC fins, fascia ,chjjas and similar items including edges, for fair finished surfaces complete all as specified and as directed by Engineer -in-Charge. 50 Materials and labour for RCC M-30 (using 20mm graded stone aggregate)as in fins, fascia, chajjas etc,complete all as specified and as directed by Engineer -in-Charge. 51 Materials and labour for Plain Cement Concrete (1:2:4) type B-1 using 20 mm gradedstone aggregate in roof kerbs, mud stops chamfered on edges complete all as specified and as directed by Engineer -in-Charge. 52 Materials and labour for mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips, complete all as specified and as directed by Engineer -in-Charge. 53 Materials and labour for mild steel TMT bars 6 to 8 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips, complete all as specified and as directed by Engineer -in-Charge. 54 Demolition of cement concrete in ground floors and pavings not exceeding 15 cmthickness (below or above ground level)as in plinth protection etc complete all as specified and as directed by Engineer -in-Charge. 55 Materials and labour for hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface 56 Materials and labour for 100mm thick Plain cement concrete (1:3:6) type C2 using 40mm graded stone aggregate as in plinth protection, pavings, laid in panels and finishing fair and even,including necessary form work complete all as specified and as directed by Engineer -in-Charge. 57 Disconnecting of existing tank of capacity 500 ltr and setting aside or lowering if required for repairs cleaning etc and refixing in position hoisting and connecting , complete all as specified and as directed by Engineer -in-Charge. 58 Disconnecting of existing tank of capacity 1000 ltr and setting aside or lowering if required for repairs cleaning etc and refixing in position hoisting and connecting , complete all as specified and as directed by Engineer -in-Charge. 59 Taking up or down, and refixing of 25mm bore, GI tubing, medium grade,in new or old positions including cleaning for refixing complete all as specified and as directed by Engineer -in-Charge. 60 Taking up or down, and refixing of 20mmbore, GI tubing, medium grade,in new or old positions including cleaning for refixing complete all as specified and as directed by Engineer -in-Charge. 61 Material and Labour for waterproofingtreatment using APP modified polymeric membrane over existing RCC roof slab with following specifications including brushing off the surface to receive the treatment including taking down existing roof treatment of any type, description and cleaning the surface by scrubbing and cleaning with water and disposing off the rubbish out side the premises to a distance exceeding 50 mand n. exc. 150mtr complete including taking down old water proofing treatment as specified anddirected by Engr-in-Charge :- (a) Applying bitumen primer @ 0.4 Litres/Sqm with density of 0.87 to 0.89 Kg/Litre at 25 degree C on the prepared dry roof surfaces. (b) Applying a coat of hot blown bitumen grade 85/25 @ 1.2kg per sqm(c) Laying 3 mm (minimum) thick APP membrane weight not less than 3.50 kg per sqm by torch application with minimum 10 cm side lap and 15 cm end lap. The laying of membrane shall be got done through an authorised applicator of manufacturer of APP membrane.(d) Over the membrane applying one coat of solar reflective bituminous aluminium paint @ 0.1 Kg/Sqm prescribed by manufacturer complete all as specified.Note:The work shall be carried out by theauthorised applicator. 62 Materials and labour for rendering 10mm thick in CM 1:4 on fair faces of brick or concrete wall surfaces finished smooth and even mixed with water proofing compound @ 3% by weight of cement or as per manufacturers instructions complete all as specified and as directed by Engineer - in -Charge. (Note:- Water proofing compound shall be measured and paid separately) 63 Supply only water proofing compound (Powder) conforming to IS-2645 1975. 64 Materials and labour for painting with two coats of oil bound distemper over a coat of primer on newly plastered or untreated surfaces of internal walls including nesessary preparation of surfaces complete all as specificed and as per directed by Engineer-in-Charge. 65 Materials and labour for painting with two coats of oil bound distemper over a coat of primer on old plastered surfaces of internal walls including complete removal of existing treatment complete all as specificed and as per directed by Engineer-in-Charge. 66 Materials and labour for two coats of OBD over a coat of primer on newly plastered surfaces of ceiling including nesessary preparation of surfacesall as specified and directed. 67 Materials and labour for preparingold decorated surfaces of ceilingand applying two coats ofOBD over a coat of primer all as specified and directed. 68 M& L for two coat ofwheather proof exterior acrylic emulsion paint with anti fungal property over a coat of primer on newly plastered external wall surfacesincluding preperation of surfaces etc complete all as specified and as directed by Engineer-in-Charge.(Make Apex Ultima) 69 Supply and fix as in repairs butt hinges, 100mm lengthB-21 type extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed , complete all as specified and directed by Engineer-in-Charge. 70 Supply and fix as in repairs butt hinges, 75mm lengthB-12 type extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed , complete all as specified and directed by Engineer-in-Charge. 71 Supply and fix as in repairs 300mm aluminium alloy, anodised, sliding door bolt with hasp & staple (Bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section of cast aluminium alloy complete all as specified and as directed by Engineer -in-Charge. 72 Supply and fix as in repairs 150mm long aluminium, anodised barrel tower bolt of extruded section, complete all as specified and as directed by Engineer -in-Charge. 73 Supply and fix as in repairs 100mm long aluminium, anodised barrel tower bolt of extruded section, complete all as specified and as directed by Engineer -in-Charge. 74 Supply and fix as in repairs 150mm size handle extruded aluminium alloy anodised, fabricated type,complete all as specified and as directed by Engineer -in-Charge. 75 Supply and fix as in repairs 100mm size handle extruded aluminium alloy anodised, fabricated type, complete all as specified and as directed by Engineer -in-Charge. 76 Supply & Fix in repairs 140mm long door stopper of aluminium alloy body and tounge, anodised with hard drawn steel springfixed in floor complete all as specified and as directed by Engineer -in-Charge. 77 Dismantling of plain or corrugated steel sheeting of any gauge, thickness, including nainital or similar pattern roof covering, complete all as specified and as directed by Engineer - in - Charge. 78 Supply and fix for prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws or Lor J type look, complete all as specified and as directed by Engineer -in-Charge. 79 Materials and labour for prepainted galvalume aluminium zinc coating GI based plain sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in ridges, valleys hips etc fixed with self tapping screws or Lor J type look, complete all as specified and as directed by Engineer -in-Charge. 80 Dismantling of mild steel work of any description not otherwise specifically provided for complete all as specified and as directed by Engineer -in-Charge. 81 Supply and fix Mild Steel work in tubular trusses and tubular posts/ purlins including special shaped washers etc., complete using ERW or inductionbutt welded tubes conforming to IS :1161-1979 grade st-240 including notching, drilling, fitting, riveting and/or welding or connecting with bed plate, bolt and nuts complete all as specified and as directed by Engineer -in-Charge. 82 Supply and fixrolled mild steel structural steel work of angle, channel etc. confirming to Fe-410-W (grade E 250) quality A, fixed as in purlins, brackets etc,complete all as specified and as directed by Engineer -in-Charge. 83 Supply and fix mild steel flat iron as in supports for wind ties, wall ties, clamps and similar small articles conforming to Fe 290 Gde-E-165 complete all as specified and as directed by Engineer -in-Charge. 84 Dismantling of boarding, of any thickness any type and in any position with nails/ screws, complete all as specifiedand as directed by Engineer-in-Charge. 85 Supply and fix second class hard wood weather boarding 20mm thick plained one side with butt joints as in eaves board complete all as specified and as directed by Engineer -in-Charge. 86 Supply and fix rotational moulded polythelene water storage tanksISI marked (cylindrical vertical with closed top) of 500 Ltrs capacitywith tank cover (top), hoisted and fixed in position, including taking down existing with all connectionscomplete all as specified and as directed by Engineer -in-Charge. 87 Supply and fix rotational moulded polythelene water storage tanksISI marked (cylindrical vertical with closed top) of 1000 Ltrs capacitywith tank cover (top), hoisted and fixed in position, including taking down existing with all connectionscomplete all as specified and as directed by Engineer -in-Charge. 88 Supply and fix 20mm dia nipple of PTMT, suitable for HDPE water tank, min weight 38 gms, complete all as specified and as directed by Engineer-in-Charge. 89 Description all as per item 97 herein before but 25mm dia, min weight 65 gms 90 Supply and fix in repairs 20mm dia nipple of PTMT, suitable for HDPE water tank, min weight 38 gms, complete all as specified and as directed by Engineer-in-Charge. 91 description all as per item 99 hereinbefore but 25mm dia, min weight 65 gms 92 Supply and fix in repairs 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed, minimum weight 142 gms,complete all as specified and directed by Engineer-in-Charge 93 Supply and fix in repairs gun metal globe or gate valve, 20mm dia, screwed down high pressure with iron wheel head, screwed both ends for iron pipes or for union complete all as specified and as directed by Engineer-in-Charge 94 Taking up or down, 15mm dia bore, GI tubing, medium grade, including removal from site, complete all as specified and as directed by Engineer-in-Charge. 95 Taking up or down, 20mm dia bore, GI tubing, medium grade, including removal from site, complete all as specified and as directed by Engineer-in-Charge. 96 Taking up or down, 25mm dia bore, GI tubing, medium grade, including cleaning for refixing or removing from site, complete all as specified and as directed by Engineer-in-Charge. 97 Supplying and laying CPVC pipes of 25mm outer dia SDR 11 & plain CPVC SDR 11 fittings on walls / ceilings or laying in floors complete all as specified 98 Supplying and laying CPVC pipes of 20mm outer dia SDR 11 & plain CPVC SDR 11 fittings on walls / ceilings or laying in floors complete all as specified 99 Demolition of cement concrete of any description and in any position complete all as specified and as directed by Engineer-in-Charge. 100 Materials and labour for 15mm thick rendering in CM 1:3 on fair faces of brick or concrete surfaces, finished even and fair in sunken floor using water proofing compound all as per manufacturers instructions etc, complete all as specified and as directed by Engineer-in-Charge. 101 Materials and labour for PCC 1:5:10 type E2 (using 40mm graded aggregates) for filling and mass concrete in sunken floor, complete all as specified and as directed by Engineer-in-Charge. 102 Materials and labour for applying for a evenly tack coat of industrial bitumen 85/25 at the rate of 1.2 kg/sqm in sunken floor including cleaning surfaces complete all as specified and as directed by Engineer-in-charge. 103 Materials and labour for providing PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in sub base of flooring of 30mm thick, complete all as specified and as directed by Engr-in-Charge. 104 Dismantling of floor, hearth or wall tilling incl cement mortar bedding (but not backing) and removing the rubbish off the premises complete all as specified and as directed by Engineer -in-Charge. 105 Materials and labour for coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 sqm n.exc 0.11 sqm, in floors etc set and jointed in neat cement slurry in floors and pointed with coloured cement to match the colour of tiles incl screed bed or bedding layer of mortar 10mm thick in CM 1:4 for laying floor finishes complete all as specified and as directed by Engineer -in-Charge. 106 Materials and labour for coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 sqm n.exc 0.18 sqm, in floors etc set and jointed in neat cement slurry in floors and pointed with coloured cement to match the colour of tiles incl screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes complete all as specified and as directed by Engineer -in-Charge. 107 Materials and labour for coloured glazed ceramic tiles 450 X 300 X 7mm thick as in dado/skirting set and jointed in neat cement slurry and pointed with coloured cement to match the colour of tiles over and including rendering 10mm thick in CM 1:3 on wall surfaces complete all as specified and as directed. 108 Materials and labour 18-20mm thick granite stone (of any type and colouredin single peice ) work (table rubbed and polished) in steps, jambs, pillars, window cills, flooring, cooking platformmachine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment tomatch the shade of granite including griding and polishing and rounding on edges types over & including screed bed 20mm thick in CM 1:4 complete all as specified and directed by Engineer-in-Charge. 109 Material & labourfor designer coloured chequred cement concrete tiles of size 20cm x 20cm x 25mm with jointed and pointed in neat cement slurry with grey cement and pigment to match the shade including screed bed 20mm in CM (1:4)all as specified and directed. 110 Supply and fix in repairs Brass Chromium plated tubular towel rail, 20mm dia, D type, 60cm long, between flanges including suitable bracket complete all as specified and as directed by Engineer-in-Charge. 111 Supply and fix in repairs,10 litre capacity,low level PVC flushing cistern, syphonic action type white colour,with in let ball valve float and handle,PVC flush pipe,brackets etc complete all as specified and as directed by Engineer-in -charge 112 Supply and fix in repairs viterous China squatting pan Orissa Patternsize 630 x 450mm white with integral foot rest, connection to trap and to flushing pipe, anti syphonge pipe etc, including making good the floor complete all as specified and as directed by Engineer-in-Charge 113 Supply and fix in repairs 600mm x 450mm bevelled edge mirror of selected quality glass,mounted on 6 mm thick commercial ply wood backing including aluminiumframe and fixed in wall with wooden plug with chromium plated brass screws and cup washers complete all as specified and as directed by Engineer -in-Charge. 114 Supply and fix in repair 32mm brass chromium plated bottle trap for wash basin with inlet and outlet screwed for pipe or connection including necessary packing union and cap complete all as specified and as directed by Engineer-in-Charge. 115 Supply and fix in repairs stainless steel gratings 125mm dia, complete all as specified and as directed by Engineer-in-Charge 116 Supply and fix in repairs vitreous China wash hand basinof size 550 x 400mm white flat back including chromium plated pillat tap, 32mm Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms/40mm-60 gms), including brackets, PVC waste pipe, including cutting for and pinning in ends of brackets or errecting stand, complete all as specified and as directed by Engineer-in-Charge. 117 Supply and fix in repair stop valve,cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screw both ends for 15mm dia iron pipe or for union and fixed complete all as specified and as directed by Engineer -in-Charge. 118 Supply and fix in repairs 15mm size PVC Connection with C P Brass Nuts of length 450mm, complete all as specified and as directed by Engineer-in-Charge. 119 Supply and fix in repair 15mm bore pillar tap, cast copper alloy with capstan heads, chromium plated screwed down, high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and as directed by Engineer-in-Charge 120 Supply and fix in repairs brass chromium plated, towel rack, with single rail complete all as specified and as directed by Engineer-in-Charge. 121 Supply and fix in repairs chromium plated, stainless steel towel rings,200mm dia complete all as specified and as directed by Engineer-in-Charge. 122 Supply and fix in repairs chromium plated hand shower (health faucet) 1 meter, with PVC tube with wall hook ,complete all as specified and as directed by Engineer-in-Charge. 123 Supply and fix in repairs brass chromium plated toilet paper holder recessed type, complete all as specified and as directed by Engineer-in-Charge. 124 Supply and fix in repairs 15mm bore stop valves fancy type chromium plated with long shank and cup, concealed type , complete all as specified and as directed by Engineer-in-Charge. 125 Supply and fix in repairs vitreous China urinal, bowl type complete including providing and fixing plugs, bedding urinal against wall in cement morter 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement etc, complete all as specified and as directed by Engineer-in-Charge. 126 Supply and fix in repair vitreous china EWC white including flush pipe, seat cover etc, including connection to drain (or out going pipe) and to flushing pipe anti syphonage pipes etc complete all as specified and as directed by Engineer-in-Charge. 127 Supply and fix in repairs two way bib cock, brass CP mixture for mixing hot & cold water complete all as specified and as directed by Engineer-in-Charge 128 Supply and fix in repair PVC waste pipe, 32mm/40mm dia, for WHB, Sink & urinal, complete all as specified and as directed by Engineer-in-Charge. 129 Supply and fix in repairs Bib tap, cast copper alloy chromium plated,15 mm dia with fancy type screwed down for iron pipes or brass ferule etc, complete all as specified and as directed by Engineer-in-Charge. 130 Supply and fix in repairs sink with drainage board, made up of stainless steel, 1mm thick for kitchen or laboratory with plug washers and waste fittings, including bedding in cement mortar 1:3 into dwarf wall or cantilever brackets and connecting union to pipe, over all size 915mm x 460mm, bowl size 410 x 330 x 160mm etc, complete all as specified and as directed by Engineer-in-Charge. 131 Supply and fix in repairs Plastic water closet seat cover complete all as specified and as directed by Engineer -in-Charge. 132 Supply and fix in repair internal kit with syphone for PVC flushing cistern 10liter capacity, complete all as specified and as directed by Engineer-in-Charge. 133 Supply and fix in repair Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms) complete all as specified and as directed by Engineer-in-Charge. 134 Supply and fix in repairs Brass Chromium plated shower rose 125mm size, with swivel joint, fixing to steel pipe or union, complete all as specified and as directed by Engineer-in-Charge. 135 Demolition of precast concrete block walling, built in cement mortar including all quoins, arches, pillars, etc 136 Materials and labour for Pre-cast PCC block masonry type B-1 (1:2:4) solid blocks and set in CM1:6 complete all as specified and directed 137 Supply and fix framed work such as grill gratings etc with ends of bars riveted forged into spikes guard bars barred iron fixed independently in wooden frames and similar work confirming to Fe-290 Gde- 165, complete all as specified and as directed by Engineer-in-Charge. 138 Supply and fix 2nd class hardwood small fittings such as brackets, door, stoppers etc articles n.exc 200 Cubic centimeter each complete all as specified and as directed by Engineer -in-Charge. 139 Materials and labour for one coat of synthetic enamel paint on old painted wood/wood based surfaces exceeding10 cm width or girth including preparation of surfaces complete all as specified and directed by Engineer-in-Charge. 140 Supply and fix solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing in SSR complete all as specified and directed by Engineer -in-Charge. 141 Supply and fix in repairs 18/19mm thick prelaminated particle board, exterior grade, prelaminated on both sides with decorative choice lamination fixed with beeding as in pelmet box, complete all as specified and directed by Engineer-in-Charge. 142 Materials and labour for Plain Cement Concrete (1:2:4) type B-1 using 20 mm gradedstone aggregate in coping complete all as specified and as directed by Engineer -in-Charge. 143 Supply and fix in repair ECO board 600x600x4mm thick decorative type fixed in existing aluminium grid frame work for false ceiling all as specified and as directed. 144 Supply and fix in repairsaluminium snap grid frame work (size of grid 605x605mm) with 35x25x1.5mm main tee and 25x25x1.4mm, cross tee and wall angle and suspended with 3.15mm dia, GI wire, hooked to roof with needful adjustment upto 1.2m long by means ofceiling cleats made out of GI Flat 40x3mm60mm long and expansion holdfastners 12.5mm dia 40mm long includingdismantling of existing ceilingboards of any description and refixing serviceable Eco board and replacing unserviceable eco board complete all as specified and as directed by Engineer-in-Charge.Note: Unserviceable ECO board obtained shall be removed and new ECO board to be fixed. Rate quoted shall be inclusive of fixing only of new ECO board/ refixing old serviceable ceiling boards. Supply only new Eco board will be measured and paid seperately 145 Supply only ECO board 600x600x4mm thick decorative type all as specified and directed 146 Materials and labour for applying one coat of OBD on new or old ceiling boards of any description complete all as specified and directed 147 Supply and fix in repairs 20mm dia aluminium anodised curtain rod with brackets, fixed to pelmet box/wall etc complete all as specified and directed by Engineer-in-Charge. 148 Dismantling of floor, hearth or wall tilling incl cement mortar bedding (but not backing) and removing the rubbish off the premises complete all as specified and as directed by Engineer -in-Charge. 149 Materials and labour for coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 sqm n.exc 0.11 sqm, in floors etc set and jointed in neat cement slurry in floors and pointed with coloured cement to match the colour of tiles incl screed bed or bedding layer of mortar 10mm thick in CM 1:4 for laying floor finishes complete all as specified and as directed by Engineer -in-Charge. 150 Materials and labour for coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 sqm n.exc 0.18 sqm, in floors etc set and jointed in neat cement slurry in floors and pointed with coloured cement to match the colour of tiles incl screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes complete all as specified and as directed by Engineer -in-Charge. 151 Materials and labour for coloured glazed ceramic tiles 450 X 300 X 7mm thick as in dado/skirting set and jointed in neat cement slurry and pointed with coloured cement to match the colour of tiles over and including rendering 10mm thick in CM 1:3 on wall surfaces complete all as specified and as directed. 152 Materials and labour 18-20mm thick granite stone (of any type and colouredin single peice ) work (table rubbed and polished) in steps, jambs, pillars, window cills, flooring, cooking platformmachine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment tomatch the shade of granite including griding and polishing and rounding on edges types over & including screed bed 20mm thick in CM 1:4 complete all as specified and directed by Engineer-in-Charge. 153 Material & labourfor designer coloured chequred cement concrete tiles of size 20cm x 20cm x 25mm with jointed and pointed in neat cement slurry with grey cement and pigment to match the shade including screed bed 20mm in CM (1:4)all as specified and directed. 154 Supply and fix in repairs,10 litre capacity,low level PVC flushing cistern, syphonic action type white colour,with in let ball valve float and handle,PVC flush pipe,brackets etc complete all as specified and as directed by Engineer-in -charge 155 Supply and fix in repairs 600mm x 450mm bevelled edge mirror of selected quality glass,mounted on 6 mm thick commercial ply wood backing including aluminiumframe and fixed in wall with wooden plug with chromium plated brass screws and cup washers complete all as specified and as directed by Engineer -in-Charge. 156 Supply and fix in repairs stainless steel gratings 125mm dia, complete all as specified and as directed by Engineer-in-Charge

INR 500 /-

INR 80000.0 /-

INR 40 Lakhs /-

FileName	File Description	File Size
e81ef6c6-2d61-4dd0-8939-cf9bcec4afc3.html	Tender Notice	0 KB
8474tenderdocuments.pdf	Tender Document	0 KB
BOQ_729060.xls	Tender Document	0 KB
Tendernotice_1.pdf	Tender Document	0 KB

Name of Work: COMPREHENSIVE MAINT & ALLIED SERVICES AT INF BN NO. 1UNDER AGE B/R-IIOF GE BIRCHGUNJ, PORT BLAIR

Sl. No.	Item Description
1	Taking down chowkats or frames with shutters area n.exc 1.5 Sqm each(without taking off shutters from the frame) complete all as specified and as directed by Engineer -in-Charge.
2	Description all as per Item No. 1 hereinbefore but are exceeding 1.5 Sqm but n.exc 4.00 Sqm complete all as specified and as directed by Engineer -in-Charge.
3	Taking down shutters of any description n exc 1 Sqm each and refixing in same opening including taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc. complete all as specified and as directed by Engineer-in-charge.
4	Taking down shutters of any description exc 1 Sqm and n exc 2 sqm each and refixing in same opening including taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc. complete all as specified and as directed by Engineer-in-charge
5	Supply and fix 2nd class hardwood, plain, solid, straight chowkats and frames wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and as directed by Engineer -in-Charge.
6	Supply and fix 2nd class hard wood 35 mm thick, plain, framed, panelled shutter ( any number of panels) with panels of timber flat on both sides ( feather edged), or ofveneered particle board medium density, wood particle board with commercial face veneers, the sizes of members of shutters shall be specified and as directed by Engineer-in-Charge.
7	Supply and fix 2nd class hard wood 30mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc, divided into squares with plain, chamfered or rounded, mitred and rebated sash bars any numbers edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass guaze etc complete all as specified and as directed by Engineer -in-Charge.
8	Materials and labour for preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer -in-Charge.
9	Materials and labour for preparation of old steel surface of any description over 10cm width or girth and applying one coats of synthetic enamel paintcomplete all as specified and directed.
10	Materials and labour for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
11	Materials and labour for one coat of synthetic enamel paint on old painted wood/wood based surfaces exceeding10 cm width or girth including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.
12	Supply and fix solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing in SSR complete all as specified and directed by Engineer -in-Charge.
13	Supply and fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC `C" channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVCsheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVCsheet beading, and joinedtogetherwith solvent cement, supplying & fixing in the frame at site as per specification & drawing in SSR complete all as specified and directed by Engineer -in-Charge.
14	Supply and fix for Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed
15	Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.
16	Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified
17	Supply only 4mm thick sheet glass ordinary quality and glazing with rubber packing around the glass, in squares n. exc 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-charge.
18	Supply only 4mm thick figured glass ordinary quality and glazing with rubber packing around the glass, in squares n. exc 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-charge.
19	Supply only 12 mm thick Prelaminatd particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination and fixed to aluminium frames complete all as specified and as directed by Engineer -in-Charge.
20	Supply only 4mm thick ACP board (Aluminium composite panel) fixed to aluminium frames complete all as specifed and as directed
21	Supply and fix in repairs 12 mm thick Prelaminatd particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination and fixed to aluminium frames complete all as specified and as directed by Engineer -in-Charge.
22	Supply onlyaluminium alloy wire mesh 0.45mm nominal dia of wire and average width of apeture 1.4mm all as specified and as directed by Engineer-in-charge.
23	Supply and Fix in repairs aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of apeture 1.4mm fixed with aluminium wire staples etc.complete all as specified and as directed by Engineer-in-charge.
24	Supply and fix in repairs 18/19mm thick prelaminated particle board, exterior grade, prelaminated on both sides with decorative choice lamination fixed with beeding as in pelmet box, complete all as specified and directed by Engineer-in-Charge.
25	Supply and fix sheet glass ordinary quality and glazing with oil putty /wdn beads in square n.exc.0.50sqm in each pane 4 mm thick plain glass on new or old windows incl hacking out old complete all as specified and directed by Engineer-in-Charge.
26	Supply and fix Figured glass, pin headed type ordinary quality and glazing with oil putty /wdn beads in square n.exc.0.50sqm in each pane 3 mm thick plain glass on new or old windows incl hacking out old complete all as specified and directed by Engineer-in-Charge.
27	Supply and fix Butt hinges, 100mm lengthB-21 type extruded stainless steel with galvanised mild steel hinge pin, anodised and fixed , complete all as specified and directed by Engineer-in-Charge.
28	Supply and fix Butt hinges, 75mm lengthC-22 type extruded stainless steel with galvanised mild steel hinge pin, anodised and fixed , complete all as specified and directed by Engineer-in-Charge.
29	Supply and fix 300mm aluminium alloy, anodised, sliding door bolt with hasp & staple (Bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section of cast aluminium alloy complete all as specified and as directed by Engineer -in-Charge.
30	Supply and fix 150mm long aluminium, anodised barrel tower bolt of extruded section, complete all as specified and as directed by Engineer -in-Charge.
31	Description all as per item 31 hereinbefore but 100mm long.
32	Supply and fix 150mm size handle extruded aluminium alloy anodised, fabricated type, complete all as specified and as directed by Engineer -in-Charge.
33	Description all as per item 33 hereinbefore but 100mm long.
34	Supply and fix decorative/fancy designer draphery rod 20 to 25mm dia fixing to wall with suitable brackets etc complete all as specifed and directed.
35	Supply and fix decorative/fancy designer brackets suitable for decarative draphery rods 20 to 25mm dia etc complete all as specified and as directed.
36	Taking down cement plaster of any description incl raking out joints, hacking for key, scrubbing down with water, etc all as specified and as directed by Engineer-in-Charge.
37	Materials and labour rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finishing the surface even and smooth without using extra cement, complete all as specificed and as per directed by Engineer-in-Charge.
38	Materials and labour for rendering 5 mm thick in CM 1:3 finished even and smooth without using extra cement on ceiling including cement slurry 3 kg/sqm complete all as specificed and as per directed by Engineer-in-Charge.
39	Materials and labour rendering 5mm thick in CM 1:4 with using water proofing compound over and including10mm thick in CM 1:6 on external surfaces of block masontry even and smooth without using extra cement, complete all as specificed and as per directed by Engineer-in-Charge.
40	Materials and labour for removing loose and broken concrete by chiselling /picking etc upto a depth of 10 to 20 mm from floor/roof slab/chajjasand similar structural members cleaning the dismantled portion with wire brushes etc to remove dust, dirt and other foreign particles including necessary scaffolding etc and removal of debris to a distance not exceeding 50m, complete all as specified and as directed by Engineer -in-Charge.
41	Materials and labour for application of high build polymer modified cement mortar (1:2.5) mixed with 3 kg SBR per bag of cement in ceiling surfaces 10 to 20mm thick in two layers surfaces over a coat of bonding agent Nito Bond SBR (1 Ltr SBR + 1 Ltr) water + 3 kg cement), complete all as specified and as directed by Engineer -in-Charge.
42	Materials and labour for removing loose and broken concrete by chiselling /picking etc upto a depth of 50 to 100 mm from columns, beams and similar structural members cutting edges cleaning the dismantled portion with wire brushes etc to remove dust, dirt and other foreig
43	Materials and labour for applying one coat of anti corrossive primer @ 0.25 Lit/Sqm for the steel area to exposed old and new reinforcement to the full circumfrance and length of bars to form unbroken 40 Micron thick film all as specified and directed by Engr-in-Charge.
44	Materials and labour for applying one coat epoxy bonding agent @ 2.6 sqm/lit oras per manufactures instruction to old concrete surfaces all as specified and directed by Engr-in-Charge to surfaces of columns, beams and similar structural members all as specified
45	Materials and labour for non shrink, cementitous micro concrete mixed with 12.5 graded stone aggregate using Renderoc RG or equivalent as approvedby GE(18 Kg Aggregate : 25 Kg Renderoc RG) respectively (as per manufatures instruction) laid in average thickness 50 to 100 mm in situ incl formwork, completee all as specified and directed
46	Materials and labourfor spraying curing compound as per manufactures instruction on freshly cast concrete surfaces all as specified. Make : Concure WB white of Fosroc or equivalent as approved by GE.
47	Materials and labour for drilling holes in slabs/wall/column/beams for anchor steel reinforcement incl washing with water, inserting lock setP" in the holes and all as specified and directed by Eng-in- Charge.Make : Lock set "P" of Fosroc or equivalent as approved by GE
48	Demolition of RCC infins, fascia column edges including cutting reinforcement etc, complete all as specified and as directed by Engineer -in-Charge.
49	Use and waste of Form work to flat surfaces of RCC fins, fascia ,chjjas and similar items including edges, for fair finished surfaces complete all as specified and as directed by Engineer -in-Charge.
50	Materials and labour for RCC M-30 (using 20mm graded stone aggregate)as in fins, fascia, chajjas etc,complete all as specified and as directed by Engineer -in-Charge.
51	Materials and labour for Plain Cement Concrete (1:2:4) type B-1 using 20 mm gradedstone aggregate in roof kerbs, mud stops chamfered on edges complete all as specified and as directed by Engineer -in-Charge.
52	Materials and labour for mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips, complete all as specified and as directed by Engineer -in-Charge.
53	Materials and labour for mild steel TMT bars 6 to 8 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips, complete all as specified and as directed by Engineer -in-Charge.
54	Demolition of cement concrete in ground floors and pavings not exceeding 15 cmthickness (below or above ground level)as in plinth protection etc complete all as specified and as directed by Engineer -in-Charge.
55	Materials and labour for hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface
56	Materials and labour for 100mm thick Plain cement concrete (1:3:6) type C2 using 40mm graded stone aggregate as in plinth protection, pavings, laid in panels and finishing fair and even,including necessary form work complete all as specified and as directed by Engineer -in-Charge.
57	Disconnecting of existing tank of capacity 500 ltr and setting aside or lowering if required for repairs cleaning etc and refixing in position hoisting and connecting , complete all as specified and as directed by Engineer -in-Charge.
58	Disconnecting of existing tank of capacity 1000 ltr and setting aside or lowering if required for repairs cleaning etc and refixing in position hoisting and connecting , complete all as specified and as directed by Engineer -in-Charge.
59	Taking up or down, and refixing of 25mm bore, GI tubing, medium grade,in new or old positions including cleaning for refixing complete all as specified and as directed by Engineer -in-Charge.
60	Taking up or down, and refixing of 20mmbore, GI tubing, medium grade,in new or old positions including cleaning for refixing complete all as specified and as directed by Engineer -in-Charge.
61	Material and Labour for waterproofingtreatment using APP modified polymeric membrane over existing RCC roof slab with following specifications including brushing off the surface to receive the treatment including taking down existing roof treatment of any type, description and cleaning the surface by scrubbing and cleaning with water and disposing off the rubbish out side the premises to a distance exceeding 50 mand n. exc. 150mtr complete including taking down old water proofing treatment as specified anddirected by Engr-in-Charge :- (a) Applying bitumen primer @ 0.4 Litres/Sqm with density of 0.87 to 0.89 Kg/Litre at 25 degree C on the prepared dry roof surfaces. (b) Applying a coat of hot blown bitumen grade 85/25 @ 1.2kg per sqm (c) Laying 3 mm (minimum) thick APP membrane weight not less than 3.50 kg per sqm by torch application with minimum 10 cm side lap and 15 cm end lap. The laying of membrane shall be got done through an authorised applicator of manufacturer of APP membrane. (d) Over the membrane applying one coat of solar reflective bituminous aluminium paint @ 0.1 Kg/Sqm prescribed by manufacturer complete all as specified. Note:The work shall be carried out by theauthorised applicator.
62	Materials and labour for rendering 10mm thick in CM 1:4 on fair faces of brick or concrete wall surfaces finished smooth and even mixed with water proofing compound @ 3% by weight of cement or as per manufacturers instructions complete all as specified and as directed by Engineer - in -Charge. (Note:- Water proofing compound shall be measured and paid separately)
63	Supply only water proofing compound (Powder) conforming to IS-2645 1975.
64	Materials and labour for painting with two coats of oil bound distemper over a coat of primer on newly plastered or untreated surfaces of internal walls including nesessary preparation of surfaces complete all as specificed and as per directed by Engineer-in-Charge.
65	Materials and labour for painting with two coats of oil bound distemper over a coat of primer on old plastered surfaces of internal walls including complete removal of existing treatment complete all as specificed and as per directed by Engineer-in-Charge.
66	Materials and labour for two coats of OBD over a coat of primer on newly plastered surfaces of ceiling including nesessary preparation of surfacesall as specified and directed.
67	Materials and labour for preparingold decorated surfaces of ceilingand applying two coats ofOBD over a coat of primer all as specified and directed.
68	M& L for two coat ofwheather proof exterior acrylic emulsion paint with anti fungal property over a coat of primer on newly plastered external wall surfacesincluding preperation of surfaces etc complete all as specified and as directed by Engineer-in-Charge.(Make Apex Ultima)
69	Supply and fix as in repairs butt hinges, 100mm lengthB-21 type extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed , complete all as specified and directed by Engineer-in-Charge.
70	Supply and fix as in repairs butt hinges, 75mm lengthB-12 type extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed , complete all as specified and directed by Engineer-in-Charge.
71	Supply and fix as in repairs 300mm aluminium alloy, anodised, sliding door bolt with hasp & staple (Bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section of cast aluminium alloy complete all as specified and as directed by Engineer -in-Charge.
72	Supply and fix as in repairs 150mm long aluminium, anodised barrel tower bolt of extruded section, complete all as specified and as directed by Engineer -in-Charge.
73	Supply and fix as in repairs 100mm long aluminium, anodised barrel tower bolt of extruded section, complete all as specified and as directed by Engineer -in-Charge.
74	Supply and fix as in repairs 150mm size handle extruded aluminium alloy anodised, fabricated type,complete all as specified and as directed by Engineer -in-Charge.
75	Supply and fix as in repairs 100mm size handle extruded aluminium alloy anodised, fabricated type, complete all as specified and as directed by Engineer -in-Charge.
76	Supply & Fix in repairs 140mm long door stopper of aluminium alloy body and tounge, anodised with hard drawn steel springfixed in floor complete all as specified and as directed by Engineer -in-Charge.
77	Dismantling of plain or corrugated steel sheeting of any gauge, thickness, including nainital or similar pattern roof covering, complete all as specified and as directed by Engineer - in - Charge.
78	Supply and fix for prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws or L"or "J" type look, complete all as specified and as directed by Engineer -in-Charge.
79	Materials and labour for prepainted galvalume aluminium zinc coating GI based plain sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in ridges, valleys hips etc fixed with self tapping screws or L"or "J" type look, complete all as specified and as directed by Engineer -in-Charge.
80	Dismantling of mild steel work of any description not otherwise specifically provided for complete all as specified and as directed by Engineer -in-Charge.
81	Supply and fix Mild Steel work in tubular trusses and tubular posts/ purlins including special shaped washers etc., complete using ERW or inductionbutt welded tubes conforming to IS :1161-1979 grade st-240 including notching, drilling, fitting, riveting and/or welding or connecting with bed plate, bolt and nuts complete all as specified and as directed by Engineer -in-Charge.
82	Supply and fixrolled mild steel structural steel work of angle, channel etc. confirming to Fe-410-W (grade E 250) quality "A", fixed as in purlins, brackets etc,complete all as specified and as directed by Engineer -in-Charge.
83	Supply and fix mild steel flat iron as in supports for wind ties, wall ties, clamps and similar small articles conforming to Fe 290 Gde-E-165 complete all as specified and as directed by Engineer -in-Charge.
84	Dismantling of boarding, of any thickness any type and in any position with nails/ screws, complete all as specifiedand as directed by Engineer-in-Charge.
85	Supply and fix second class hard wood weather boarding 20mm thick plained one side with butt joints as in eaves board complete all as specified and as directed by Engineer -in-Charge.
86	Supply and fix rotational moulded polythelene water storage tanksISI marked (cylindrical vertical with closed top) of 500 Ltrs capacitywith tank cover (top), hoisted and fixed in position, including taking down existing with all connectionscomplete all as specified and as directed by Engineer -in-Charge.
87	Supply and fix rotational moulded polythelene water storage tanksISI marked (cylindrical vertical with closed top) of 1000 Ltrs capacitywith tank cover (top), hoisted and fixed in position, including taking down existing with all connectionscomplete all as specified and as directed by Engineer -in-Charge.
88	Supply and fix 20mm dia nipple of PTMT, suitable for HDPE water tank, min weight 38 gms, complete all as specified and as directed by Engineer-in-Charge.
89	Description all as per item 97 herein before but 25mm dia, min weight 65 gms
90	Supply and fix in repairs 20mm dia nipple of PTMT, suitable for HDPE water tank, min weight 38 gms, complete all as specified and as directed by Engineer-in-Charge.
91	description all as per item 99 hereinbefore but 25mm dia, min weight 65 gms
92	Supply and fix in repairs 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed, minimum weight 142 gms,complete all as specified and directed by Engineer-in-Charge
93	Supply and fix in repairs gun metal globe or gate valve, 20mm dia, screwed down high pressure with iron wheel head, screwed both ends for iron pipes or for union complete all as specified and as directed by Engineer-in-Charge
94	Taking up or down, 15mm dia bore, GI tubing, medium grade, including removal from site, complete all as specified and as directed by Engineer-in-Charge.
95	Taking up or down, 20mm dia bore, GI tubing, medium grade, including removal from site, complete all as specified and as directed by Engineer-in-Charge.
96	Taking up or down, 25mm dia bore, GI tubing, medium grade, including cleaning for refixing or removing from site, complete all as specified and as directed by Engineer-in-Charge.
97	Supplying and laying CPVC pipes of 25mm outer dia SDR 11 & plain CPVC SDR 11 fittings on walls / ceilings or laying in floors complete all as specified
98	Supplying and laying CPVC pipes of 20mm outer dia SDR 11 & plain CPVC SDR 11 fittings on walls / ceilings or laying in floors complete all as specified
99	Demolition of cement concrete of any description and in any position complete all as specified and as directed by Engineer-in-Charge.
100	Materials and labour for 15mm thick rendering in CM 1:3 on fair faces of brick or concrete surfaces, finished even and fair in sunken floor using water proofing compound all as per manufacturers instructions etc, complete all as specified and as directed by Engineer-in-Charge.
101	Materials and labour for PCC 1:5:10 type E2 (using 40mm graded aggregates) for filling and mass concrete in sunken floor, complete all as specified and as directed by Engineer-in-Charge.
102	Materials and labour for applying for a evenly tack coat of industrial bitumen 85/25 at the rate of 1.2 kg/sqm in sunken floor including cleaning surfaces complete all as specified and as directed by Engineer-in-charge.
103	Materials and labour for providing PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in sub base of flooring of 30mm thick, complete all as specified and as directed by Engr-in-Charge.
104	Dismantling of floor, hearth or wall tilling incl cement mortar bedding (but not backing) and removing the rubbish off the premises complete all as specified and as directed by Engineer -in-Charge.
105	Materials and labour for coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 sqm n.exc 0.11 sqm, in floors etc set and jointed in neat cement slurry in floors and pointed with coloured cement to match the colour of tiles incl screed bed or bedding layer of mortar 10mm thick in CM 1:4 for laying floor finishes complete all as specified and as directed by Engineer -in-Charge.
106	Materials and labour for coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 sqm n.exc 0.18 sqm, in floors etc set and jointed in neat cement slurry in floors and pointed with coloured cement to match the colour of tiles incl screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes complete all as specified and as directed by Engineer -in-Charge.
107	Materials and labour for coloured glazed ceramic tiles 450 X 300 X 7mm thick as in dado/skirting set and jointed in neat cement slurry and pointed with coloured cement to match the colour of tiles over and including rendering 10mm thick in CM 1:3 on wall surfaces complete all as specified and as directed.
108	Materials and labour 18-20mm thick granite stone (of any type and colouredin single peice ) work (table rubbed and polished) in steps, jambs, pillars, window cills, flooring, cooking platformmachine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment tomatch the shade of granite including griding and polishing and rounding on edges types over & including screed bed 20mm thick in CM 1:4 complete all as specified and directed by Engineer-in-Charge.
109	Material & labourfor designer coloured chequred cement concrete tiles of size 20cm x 20cm x 25mm with jointed and pointed in neat cement slurry with grey cement and pigment to match the shade including screed bed 20mm in CM (1:4)all as specified and directed.
110	Supply and fix in repairs Brass Chromium plated tubular towel rail, 20mm dia, D type, 60cm long, between flanges including suitable bracket complete all as specified and as directed by Engineer-in-Charge.
111	Supply and fix in repairs,10 litre capacity,low level PVC flushing cistern, syphonic action type white colour,with in let ball valve float and handle,PVC flush pipe,brackets etc complete all as specified and as directed by Engineer-in -charge
112	Supply and fix in repairs viterous China squatting pan "Orissa Pattern"size 630 x 450mm white with integral foot rest, connection to trap and to flushing pipe, anti syphonge pipe etc, including making good the floor complete all as specified and as directed by Engineer-in-Charge
113	Supply and fix in repairs 600mm x 450mm bevelled edge mirror of selected quality glass,mounted on 6 mm thick commercial ply wood backing including aluminiumframe and fixed in wall with wooden plug with chromium plated brass screws and cup washers complete all as specified and as directed by Engineer -in-Charge.
114	Supply and fix in repair 32mm brass chromium plated bottle trap for wash basin with inlet and outlet screwed for pipe or connection including necessary packing union and cap complete all as specified and as directed by Engineer-in-Charge.
115	Supply and fix in repairs stainless steel gratings 125mm dia, complete all as specified and as directed by Engineer-in-Charge
116	Supply and fix in repairs vitreous China wash hand basinof size 550 x 400mm white flat back including chromium plated pillat tap, 32mm Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms/40mm-60 gms), including brackets, PVC waste pipe, including cutting for and pinning in ends of brackets or errecting stand, complete all as specified and as directed by Engineer-in-Charge.
117	Supply and fix in repair stop valve,cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screw both ends for 15mm dia iron pipe or for union and fixed complete all as specified and as directed by Engineer -in-Charge.
118	Supply and fix in repairs 15mm size PVC Connection with C P Brass Nuts of length 450mm, complete all as specified and as directed by Engineer-in-Charge.
119	Supply and fix in repair 15mm bore pillar tap, cast copper alloy with capstan heads, chromium plated screwed down, high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and as directed by Engineer-in-Charge
120	Supply and fix in repairs brass chromium plated, towel rack, with single rail complete all as specified and as directed by Engineer-in-Charge.
121	Supply and fix in repairs chromium plated, stainless steel towel rings,200mm dia complete all as specified and as directed by Engineer-in-Charge.
122	Supply and fix in repairs chromium plated hand shower (health faucet) 1 meter, with PVC tube with wall hook ,complete all as specified and as directed by Engineer-in-Charge.
123	Supply and fix in repairs brass chromium plated toilet paper holder recessed type, complete all as specified and as directed by Engineer-in-Charge.
124	Supply and fix in repairs 15mm bore stop valves fancy type chromium plated with long shank and cup, concealed type , complete all as specified and as directed by Engineer-in-Charge.
125	Supply and fix in repairs vitreous China urinal, bowl type complete including providing and fixing plugs, bedding urinal against wall in cement morter 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement etc, complete all as specified and as directed by Engineer-in-Charge.
126	Supply and fix in repair vitreous china EWC white including flush pipe, seat cover etc, including connection to drain (or out going pipe) and to flushing pipe anti syphonage pipes etc complete all as specified and as directed by Engineer-in-Charge.
127	Supply and fix in repairs two way bib cock, brass CP mixture for mixing hot & cold water complete all as specified and as directed by Engineer-in-Charge
128	Supply and fix in repair PVC waste pipe, 32mm/40mm dia, for WHB, Sink & urinal, complete all as specified and as directed by Engineer-in-Charge.
129	Supply and fix in repairs Bib tap, cast copper alloy chromium plated,15 mm dia with fancy type screwed down for iron pipes or brass ferule etc, complete all as specified and as directed by Engineer-in-Charge.
130	Supply and fix in repairs sink with drainage board, made up of stainless steel, 1mm thick for kitchen or laboratory with plug washers and waste fittings, including bedding in cement mortar 1:3 into dwarf wall or cantilever brackets and connecting union to pipe, over all size 915mm x 460mm, bowl size 410 x 330 x 160mm etc, complete all as specified and as directed by Engineer-in-Charge.
131	Supply and fix in repairs Plastic water closet seat cover complete all as specified and as directed by Engineer -in-Charge.
132	Supply and fix in repair internal kit with syphone for PVC flushing cistern 10liter capacity, complete all as specified and as directed by Engineer-in-Charge.
133	Supply and fix in repair Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms) complete all as specified and as directed by Engineer-in-Charge.
134	Supply and fix in repairs Brass Chromium plated shower rose 125mm size, with swivel joint, fixing to steel pipe or union, complete all as specified and as directed by Engineer-in-Charge.
135	Demolition of precast concrete block walling, built in cement mortar including all quoins, arches, pillars, etc
136	Materials and labour for Pre-cast PCC block masonry type B-1 (1:2:4) solid blocks and set in CM1:6 complete all as specified and directed
137	Supply and fix framed work such as grill gratings etc with ends of bars riveted forged into spikes guard bars barred iron fixed independently in wooden frames and similar work confirming to Fe-290 Gde- 165, complete all as specified and as directed by Engineer-in-Charge.
138	Supply and fix 2nd class hardwood small fittings such as brackets, door, stoppers etc articles n.exc 200 Cubic centimeter each complete all as specified and as directed by Engineer -in-Charge.
139	Materials and labour for one coat of synthetic enamel paint on old painted wood/wood based surfaces exceeding10 cm width or girth including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.
140	Supply and fix solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing in SSR complete all as specified and directed by Engineer -in-Charge.
141	Supply and fix in repairs 18/19mm thick prelaminated particle board, exterior grade, prelaminated on both sides with decorative choice lamination fixed with beeding as in pelmet box, complete all as specified and directed by Engineer-in-Charge.
142	Materials and labour for Plain Cement Concrete (1:2:4) type B-1 using 20 mm gradedstone aggregate in coping complete all as specified and as directed by Engineer -in-Charge.
143	Supply and fix in repair ECO board 600x600x4mm thick decorative type fixed in existing aluminium grid frame work for false ceiling all as specified and as directed.
144	Supply and fix in repairsaluminium snap grid frame work (size of grid 605x605mm) with 35x25x1.5mm main tee and 25x25x1.4mm, cross tee and wall angle and suspended with 3.15mm dia, GI wire, hooked to roof with needful adjustment upto 1.2m long by means ofceiling cleats made out of GI Flat 40x3mm60mm long and expansion holdfastners 12.5mm dia 40mm long includingdismantling of existing ceilingboards of any description and refixing serviceable Eco board and replacing unserviceable eco board complete all as specified and as directed by Engineer-in-Charge. Note: Unserviceable ECO board obtained shall be removed and new ECO board to be fixed. Rate quoted shall be inclusive of fixing only of new ECO board/ refixing old serviceable ceiling boards. Supply only new Eco board will be measured and paid seperately
145	Supply only ECO board 600x600x4mm thick decorative type all as specified and directed
146	Materials and labour for applying one coat of OBD on new or old ceiling boards of any description complete all as specified and directed
147	Supply and fix in repairs 20mm dia aluminium anodised curtain rod with brackets, fixed to pelmet box/wall etc complete all as specified and directed by Engineer-in-Charge.
148	Dismantling of floor, hearth or wall tilling incl cement mortar bedding (but not backing) and removing the rubbish off the premises complete all as specified and as directed by Engineer -in-Charge.
149	Materials and labour for coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 sqm n.exc 0.11 sqm, in floors etc set and jointed in neat cement slurry in floors and pointed with coloured cement to match the colour of tiles incl screed bed or bedding layer of mortar 10mm thick in CM 1:4 for laying floor finishes complete all as specified and as directed by Engineer -in-Charge.
150	Materials and labour for coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 sqm n.exc 0.18 sqm, in floors etc set and jointed in neat cement slurry in floors and pointed with coloured cement to match the colour of tiles incl screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes complete all as specified and as directed by Engineer -in-Charge.
151	Materials and labour for coloured glazed ceramic tiles 450 X 300 X 7mm thick as in dado/skirting set and jointed in neat cement slurry and pointed with coloured cement to match the colour of tiles over and including rendering 10mm thick in CM 1:3 on wall surfaces complete all as specified and as directed.
152	Materials and labour 18-20mm thick granite stone (of any type and colouredin single peice ) work (table rubbed and polished) in steps, jambs, pillars, window cills, flooring, cooking platformmachine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment tomatch the shade of granite including griding and polishing and rounding on edges types over & including screed bed 20mm thick in CM 1:4 complete all as specified and directed by Engineer-in-Charge.
153	Material & labourfor designer coloured chequred cement concrete tiles of size 20cm x 20cm x 25mm with jointed and pointed in neat cement slurry with grey cement and pigment to match the shade including screed bed 20mm in CM (1:4)all as specified and directed.
154	Supply and fix in repairs,10 litre capacity,low level PVC flushing cistern, syphonic action type white colour,with in let ball valve float and handle,PVC flush pipe,brackets etc complete all as specified and as directed by Engineer-in -charge
155	Supply and fix in repairs 600mm x 450mm bevelled edge mirror of selected quality glass,mounted on 6 mm thick commercial ply wood backing including aluminiumframe and fixed in wall with wooden plug with chromium plated brass screws and cup washers complete all as specified and as directed by Engineer -in-Charge.
156	Supply and fix in repairs stainless steel gratings 125mm dia, complete all as specified and as directed by Engineer-in-Charge