Indian Institute Of Science Education And Research-IISER has published Tender For Repairing Work For High Mast Pole And Replacement Of Luminaries At Iiser-Kolkata Mohanpur Campus. Submission Date for this Tender is 10-05-2024. Electrification Work Tenders in kolkata West Bengal. Bidders can get complete Tender details and download the document.
FileName | File Description | File Size |
aa44b237-956d-44ba-99db-f4b76db774ba.html | Tender Notice | 0 KB |
BOQ_846283.xls | Tender Document | 0 KB |
Tendernotice_1.pdf | Tender Document | 0 KB |
Sl. No. | Item Description |
1 | Service charges for the high mast including following activities. a) Servicing of double drum winches including cleaning, oil filling, hardware checking, winch alignment checking, etc., b) Checking and correcting the clamps & hard wares on wire ropes & trailing cables including their replacement (only clamps), if required. c) Checking and correcting the local electrical connections inside the high mast. d) Checking junction boxes & its connections on the lantern carriage including their replacement, if required. e) Checking of the earth connections of the high mast & tightening all loose hardware. f) Checking of alignment of lantern carriage with respect to mast, installation & wiring of light fittings. g) Repairing/rewinding /servicing of High mast motors (Supply of all required accessoriesfor the above job shall be in the scope of contractor) |
2 | S&F LED Flood light fittings of 300 Watts LED made up of pressure die cast Aluminium housing with toughed glass and individual LEDs with secondary optics and IP 66 protection, CCT- min 5700K,CRI >70,PF>0.95,Surge Protection 10 KV, Luminaire efficiency:=110 lm/W including connection with pole junction box , testing complete all as specified and as directed by Engineer-in-Charge. Note : (i)Quoted rate should be inclusive of taking down existing fitting SV/MHlight, security light fittings (any type and any size), LED light any type, through ladder mounted on any type of poles/bldgs (up to 13 mtr height) from bracket after disconnecting supply cable for replacement of fittings all as specified and directed by Engineer in charge. NOTE:Rate should inclusive onsite warranty for a period of 2 years from date of supply of LED Luminaries. Make:- Bajaj, Crompton, Havells, Orient as approved by Engineer-in-charge) |
3 | Repairing of motor control panel with supply of common accesoriessuch asAuto/Manual operation of its motor for the operation of the High Mast,control switch DIN channel etc. as required. |
4 | Taking out old used contractor and S&F AC operated power contactor 40 Amps, 415 volts AC, 50 HZ, 3 pole, complete with Add-on Auxiliary Contact Blocks as per requirement during commissioning all as specified and as directed by Engineer-in-Charge . (Make:ABB ,Model Type AX-25-30-10-80/ or equivelent make in Siemens/ABB/C&S/BCH/GE as approved by Engr. I/c) |
5 | Supply & fixing Digital time switch(same as model no-CRONO 67DDTO, 240 Volt AC 50 Hz ) all as specified and commissioning as directed by Engineer-in-Charge including taking out old timer . (Make: GICCat No:-CRONO 67 DDTO/ or equivelent as approved by Engr I/c ) |
6 | Painting of 12 meter High MastPole with Junction box withtwo coat fine finished aluminium paintings (of approved make and brand as per IS 2339) incl. preparation of surface by sand paper/emery paper, cleaning etc.incl. preparation of surface by sand paper/emery paper, cleaning etc. i/c supply of all materials, labour and tools & plants, matching with existing color pole etc. as directed by the engineer-in charge complete in all respect.Bidders should note that the quoted rates must be inclusive of cutting, cleaning and removal of unwanted grass, bushes, creepers, small plants/trees etc. in the area(maximum upto 4 Sqmtr) around the poles as per requirement and as per direction of the Engineer I/c. Any kind of tools, tackles , material ,labour, cartage etc. involvement required is under the scope of the bidder and no additional payment will be made for that.Make: Asian Paints/Berger paints/Kansai Nerolac/Shalimar Paints |
7 | High mast trailing cable Tinned Annealed High Conductivity Flexible Copper Conductor 4 Sqmm 5 Core EPR Insulated PCP OutersheathedAs Per IS:8130/2013( Latest) |
8 | Supply only electronic ignitors suitable for HPI(-T) 250-400 Watt SV/MH street light fitting 240V, 50HZ complete all as specified and directed .Make Philips or equivelent in Bajaj/CG as approved by Engr I/c |
9 | Repairing of 6.0/5.0 mtr long broken/rusted/bend street light pole encircling with min 0.60 mtr. long two steel half pipes of suitable diameter and thickness weladedtogether to form a jacket with encases the base of the pole also welded to base plate to strengthen the pole and welding 4 nos.Gusset/Rib Plate of 15 mm thickness from 70 mm height of base plateand .Taking down from the existing foundation and reinstall the same to it"s own foundation after repairing( ifrequired) etc. as required. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail