Mahanadi Coalfields Limited has published Tender For Day To Day Civil Maintenance At Balram Township Under Hingula Area For A Period Of 60 Days.. Submission Date for this Tender is 06-05-2024. Civil Work Tenders in Anugul Odisha. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Item Description |
| 2 | Day to day maintenance of water supply network and plumbing work etc. with all labour cost but excluding cost of materials as per instruction of EIC. (1 Skilled and 1 unskilled worker per Day) |
| 3 | Providing brass bib cock 15 mm dia conforming to relevant IS of approved make as per direction of EIC. |
| 4 | ProvidingC.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore |
| 5 | Providing 15 mm PTMT bibcock of approved make as per direction of EIC. |
| 6 | Providing PTMT Pillar cock of approved make as per direction of EIC. |
| 7 | Providing G.I. pipes complete . Internal work - Exposed on wall : 32 mm dia nominal bore |
| 8 | ProvidingG.I. pipes: 40 mm dia nominal bore |
| 9 | Providing G.I. pipes complete . Internal work - Exposed on wall : 80 mm dia nominal bore |
| 10 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore |
| 11 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : Above 40 mm nominal bore |
| 12 | Providing Chlorinated Polyvinyl - chloride (CPVC) pipe 20 mm outer diaconfirming to relevant IS of approved make as per direction of EIC. |
| 13 | Providing Chlorinated Polyvinyl - chloride (CPVC) pipe 25 mm outer diaconfirming to relevant IS of approved make as per direction of EIC. |
| 14 | Providing brass full way valve with C.I wheel (screwed end) 25 mm dia confirming to relevant IS as per direction of EIC. |
| 15 | Providing brass full way valve with C.I wheel (screwed end) 32 mm dia confirming to relevant IS as per direction of EIC. |
| 16 | Providing polyethylene water storage tank with cover and suitable locking arrangementISI-12701 marked as per direction of EIC. |
| 17 | Providing uplasticised PVC connection pipe with brass unions : 45 cm length : 15 mm nominal bore confirming to relevant IS as per direction of EIC. |
| 18 | Providing GI union 32mm dia of approved quality as per instruction of EIC. |
| 19 | Providing GI union 40mm dia of approved quality as per instruction of EIC. |
| 20 | Providing C.P. brass angle valve 15 mm confirming to relevant ISas per instruction of EIC. |
| 21 | Providing flushing cistern P.V.C 10 litre capacity (low level) (white) (with fittings,accessories and flush pipe) of approved make as per direction of EIC. |
| 22 | Providing vitreous china flat back wash basin 550 x 400 mm confirming to relevant IS as per direction of EIC. |
| 23 | Providing stainless sink without drain board 470x420 mm bowl depth 178mm confirming to relevant IS as per direction of EIC. |
| 24 | Providing mirror of superior make glass 60x45 cm of approved make as per direction of EIC. |
| 25 | Providing hard board 6mm thick of approved make as per direction of EIC. |
| 26 | Providing semi rigidP.V.C. waste pipe for sink or wash basin 32 mm dia with length not less than700 mm i/c PVC waste fittimgs of approved make as per instruction of EIC. |
| 27 | Providing semi rigidP.V.C. waste pipe for sink or wash basin 40 mm dia with length not less than700 mm i/c PVC waste fittimgs of approved make as per instruction of EIC. |
| 28 | providing coupling 40 mm for kitchen sink of approved make as per direction of EIC |
| 29 | Providing UPVC pipes (working pressure 4 kg/cm) single socketedpipe 110 mm dia confirming to relevant IS approved make as per dirction of EIC. |
| 30 | Providing UPVC pipeclip 110 mm bend confirming to relevant IS approved make as per direction of EIC. |
| 31 | Providing UPVC bend 87.5 degree 110 mm bend confirming to relevant IS of approved make as per direction of EIC. |
| 32 | Providing White plastic seat (solid) with lid C.P brass hinges and rubber buffers of approved make as per direction of EIC. |
| 33 | Providing 600 x 120 mm glass shelf with anodised aluminium angle frame,C.P brass brackets and guard rails of standard size of approved make as per direction of EIC. |
| 34 | Providing Brass stop-cock 15 mm diaconfirming to relevant IS of approved make as per direction of EIC. |
| 35 | Providing shower rose C.P brass for 115 to 20 mm inlet 100 mm dia of approved as per direction of EIC. |
| 36 | Providing Syphone Set for PVC cistern |
| 37 | Providing PVC low level cistern washer kit as per instruction of Engineer-in-Charge. |
| 38 | Providing PVC washer suitable for brass bib cock and stop cock of approved make as per direction of EIC |
| 39 | Providing M-seal adhesive or equivalent (in packets of 100 gm) as per instruction of Engineer-in-Charge. |
| 40 | Providing polyethylene water storage tank cover as per instruction of Engineer-in-charge |
| 41 | Supplying of G.I. Short piece(Above 50 mm & up to 150 mm long).20 MM DIA |
| 42 | Providing GIELBOW 32 MM dia of approved quality as per instruction of Engineer-in-charge |
| 43 | Providing GITEE32 MM dia of approved quality as per instruction of Engineer-in-charge |
| 44 | Providing GISOCKET32 MM dia of approved quality as per instruction of Engineer-in-charge |
| 45 | Supplying of G.I. Short piece t (Above 50 mm & up to 150 mm long). 25MM DIA |
| 46 | Providing brass Spindle suitable for CP pillar cock,cp bibcock of approved make as per direction of EIC. |
| 47 | Providing 32 mm cp waste for wash basin of 4inch long of approved make as per direction of EIC |
| 48 | Providing 40 MM CP waste for kitchen sink of 9 inch length of approved make as per direction of EIC |
| 49 | Providing 15mm C.P. brass pillar tap of approved quality (plaza brand or equivalent) as per instruction of Engineer-in-charge |
| 50 | Providing c.p grating for trap bathroom |
| 51 | Providing CPVC Tank nipple 25MM dia of approved quality as per instruction of Engineer-in-charge |
| 52 | Providing rack bolt using wash basin of approved make as per direction of EIC. |
| 53 | Providing brass mirror screws of approved quality as per direction of EIC. |
| 54 | Providing flush bend for flushing cistern of length 1.00 Mtr of approved make as per direction of EIC. |
| 55 | Providing white cement (1 kg pack)as per instruction of Engineer-in-charge. |
| 56 | Day to Dayrepairing of damagedold door, window shutter, ventilators & cupboard shutter etc.Scope of work :- The agency has to engage one carpenter & one unskilled labour per Day . |
| 57 | Supply of aluminum sheets of 28 gauge for misc. carpentry work of repairing door ect as per direction of the engineer -in-charge. |
| 58 | Providing Oxidised mild steel sliding door bolt 300x16 mm ISI marked in a phased manner as per direction of EIC. |
| 59 | Providing Oxidised mild steel tower bolt (barrel type) 250x10 mm confirming to relevant IS in a phased manner of approved make as per direction of EIC. |
| 60 | Providing Oxidised mild steel handles 100 mmISI in a phased manner of approved make as per direction of EIC. |
| 61 | Providing Anodised Aluminium sliding door bolt 300x16 mm |
| 62 | Providing Anodised Aluminium tower bolt (Barrel type) 150x10 mm ISI in phased manner of approved make as per direction of EIC |
| 63 | Providing Anodised aluminium handles 125mm with plate 175x32 mm ISI in phased manner of approved make as per direction of EIC. |
| 64 | Providing Oxidised mild steel handles 125 mm |
| 65 | Providing Bright finished or black enameled mild steel screws 40 mm |
| 66 | Providing Bright finished or black enameled mild steel screws 30 mm |
| 67 | Providing Bright finished or black enameled mild steel screws 25 mm |
| 68 | Providing Bright finished or black enameled mild steel screws 20 mm |
| 69 | Providing Putty for wood work |
| 70 | Providing Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm) of approved make as per requirement and direction of EIC. |
| 71 | Labour chargesfor Day to Day maintenance works related with welding works like welding of hinges, welding of flats in window grills and other petty jobs related with welding works as and when required by deploying welder, beldar/coolie in residential quarters of Balram township. ( Welding machine, welding rod and electricity is to be provided by the department.) as per instruction of Engineer-in-charge.Scope Of Work : - ( By engaging 1 welder + 1 Helper per Day ) 3 Days ina week |
| 72 | Providing welding rod as per instruction of of Engineer-in-charge. |
| 73 | Providing Stainless steel Spindle with check nut for 6” Valve approved make as per direction of EIC |
| 74 | Providing Stainless steel Spindle with check nut for 8” Valve approved make as per direction of EIC |
| 75 | Providing & fixingU clamp for sluice valve for following dia as per direction of EIC of 150mm dia. |
| 76 | Providing U clamp for sluice valve for following dia as per direction of EIC of 200mm dia. |
| 77 | Providing gland packing for repairing work |
| 78 | Providing of rubber packing |
| 79 | Welding of G.I pipe upto 100mm dia including required cutting and refilling of earth with electric welding as per instruction of EIC. |
| 80 | Providing C.I. sluice valve (with caps) class l 80 mm dia confirming to relevant IS as per direction of EIC |
| 81 | Providing C.I. sluice valve (with caps) class l 150 mm dia confirming to relevant IS as per direction of EIC |
| 82 | Providing C.I. sluice valve (with caps) class l 200 mm dia confirming to relevant IS as per direction of EIC |
| 83 | Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres :Above 150 mm diameter |
| 84 | Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres : Up to 150 mm diameter |
| 85 | Welding of 350 dia hume steel pipe in electric welding machine i/c cutting etc complete as per instruction of EIC. (full circumference) |
| 86 | Welding of 200 dia hume steel pipe in electric welding machine i/c cutting etc complete as per instruction of EIC. (full circumference) |
| 87 | Cleaning of masonary chamber with sewer pipe line including making good of damaged deposition of the sewer line from Quarters and nonresidential buildings to the STP as per instruction of EIC. |
| 88 | Distribution arrangement of drinking water to Balaram Colony through existing pipeline by dept.pump, valve,motor operation on daily basis in three shift etc. Complete and mixing of alum as per instruction of EIC . Scope of work :- 3 Nos Semi Skilled Manpower to be engage per Day |
| 89 | Operation of Pump, valve at filter bed in three shift as per instruction of EIC. Scope of work :- 3 Nos Semi Skilled Manpower to be engage per Day |
| 90 | Operation of STP pump , motor and valve in two shift r as per direction of EIC. Scope of Work:- Man power per Day : Pump Khalasi - 02 NosSemi skilled |
| 91 | Up- keeping of STP including cleaning cleaning of dry bed, sludge bed, aeration tank, clarifire tank, screen chamber and manhole chamber within STP and disposal of sludge within a lead of50 mtr as per instruction of EIC.Scope of Work : - Man power per Day : UnskilledLabour - 01 No. x 01 shift= 01 nos.(Excluding SunDay and HoliDays) |
| 92 | Cleaning of over head water tank (HDPE / Masonary) by applying bleaching powder, washing the tank neatly as per instruction of EIC (Upto 2000 Litre capacity) |
| 93 | Cleaning of Drains without siltation or sludge deposition: Open Surface drain up to 250 mm wide. |
| 94 | Cleaning of Drains without siltation or sludge deposition: Open Surface drain above 250 mm width |
| 95 | Upkeeping of concrete pavement/ Black topped roads excluding coal transport road by brooming and disposal of collected debris/ waste at collection pit/ dustbins or at specified locations within a lead of 50 metres including all tools & plants like spade, basket, brooms with handle stick complete as per the direction of Engineer-In-Charge. |
| 96 | Carriage of garbage or earth mixed other wastes by tractor trolley including manual loading and unloading and disposing at garbage dumps or at any other specified location as per the direction of Engineer-In-Charge.For lead of 5 km |
| 97 | Disposal of dead animal body outside colony/ market/ Village area including carriage by labour as per instruction of EIC. Small Animal (Dog, Cat etc.) |
| 98 | Disposal of dead animal body outside colony/ market/ Village area including carriage by labour as per instruction of EIC. BigAnimal (Bull, Ox , Cow etc.) |
| 99 | Cutting and cleaningof grass over area with grass cutting machine (Operation based on petrol) to required shape as per instruction of the Engr.I/C.(Scope of work:Ageny has to deploy the grass cutting machine with opertor,fuel and lubricant on daily basis) |
| 100 | Collection of Polythene from different locations scattered in colony area & Dustbin placed in a specified place including Burning the same as per instruction of EIC.(Scope of work:Agency has to deploy 3 unskilled labour for 06 Days in a week) |
| 101 | Annual maintenance of lawns, gardens, flower beds in pump house,Town Administration office,Temple premises,Meditation Centres,Dispensary ,Transite house and SBI BANK premises,Utkalika ,N joy club,Balram Guest house STP Premises , Booster premises etc and developing garden in left out areas and maintenance of flower pots in community centre and other buildings located at Balram Township preparation of seasonal plants and maintenance of the same at Balram Township. Scope of work (a) Contractor shall maintain existing Lawns, flower beds, plants. Gardens, orchard area. (b) Contractor will prepare new lawns flower beds & gardens as and when required by Engineer-i-Charge, digging excavating and levelling the ground is to be done wherever required. (c) Contractor shall be responsible for planting new plants like hedges, saplings, seasonal flowers etc. by digging pits and maintaining the same (Cost of the plants lo be paid separately to the agency). (d) The fertilizers, manures, pesticides etc are to be applied in the lawn, garden and orchard as and when required (The cost offertilizers, manures. pesticides etc shall be paid separately to the agency) (e) Water will be made available at some points by the department and the contractor will use the water by using pipes which will be procured by the contractor. (f)Maintenance work as desired by Engineer-in-charge on priority basis has to be strictly followed by the contractor. (g) The contractor will look after the work and will maintain coordination withthe department and will attend to the complaint (h)The lawn area, garden area, orchard area is to be kept clean from rubbish, weeds and Jungles (i) Total area to be maintained by engaging 08 nos of unskilled manpower per Day at different locations in colony |
| 102 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 103 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 104 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 105 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars |
| 106 | Brick work with Fly Ash Brick (230x115x75 mm size) bricks of class designation 10 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 107 | Brick work withFly Ash Brick (230x115x75 mm size) bricks of class designation 10 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 108 | Cement concrete flooring 1:2:4 (1cement : 2coarse sand : 4graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate |
| 109 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 110 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4Coarse sand), including pointing the joints with white cement and matching pigment etc., complete. |
| 111 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm |
| 112 | 12 mm cement plaster of mix : 1:6 (1cement : 6fine sand) |
| 113 | Supplying and filling in plinth withsand under floors, including watering, ramming, consolidating and dressing complete. |
| 114 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : Orissa pattern W.C. pan of size 580x440 mm |
| 115 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet Sand Cast Iron S&S as per IS: 1729 |
| 116 | Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 12 mm cement plaster |
| 117 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. |
| 118 | Providing and laying water proofing treatment through grading of roof with cement concrete 1:1.5:3 (1 cement :1.5 coarse sand :3 stone aggregate 12.5 mm nominal size + 200 ml of water proofing compound like pidilite"s pidiproof LW+perbag of cement used in cewment concrete) by applying an under layer of cement slurry @0.488 kg per sqm mixed with water proofing compound like pidilite"s pidiproof LW+ @200 ml per bag of cement or equavalent followed by air cure for 04 hours .The cement concrete laid over the layer of cement slurry shall be plate vibrated for proper compaction followed by water curing for fourteen Days minimum as per the direction of Engineer-in-charge. |
| 119 | Supply of portland cement.(OPC 43 grade) or equivalent as per instruction of EIC. |
| 120 | Supply of river sand at site as per instruction of EIC |
| 121 | Labour charges including tools and plants for Day to Day maintenance work like brick work, plastering, flooring and other petty jobs as and when required on daily basis by deploying masons, beldar/coolie in residential quarters of Balram Township colony. (Materials to be used in this item are to be paid separately) as per instruction of Engineer-in-charge. |
| 122 | Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litreof approved brand and manufacture to give an even shade :Old work (one or more coats) |
| 123 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work |
| 124 | Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (One or more coat applied @ 0.90 ltr/10 sqm). |
| 125 | Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 126 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately)Kiln seasoned and chemically treated hollock wood . 2 30 mm thick shutters |
| 127 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :Kiln seasoned and chemically treated hollock wood |
| 128 | Providing and fixing to existing door frames.24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of "H" section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. "U" cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer"s specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter). |
| 129 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer- in-Charge. |
| 130 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 300x16 mm |
| 131 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete200x10 mm |
| 132 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm |
| 133 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :Of area 3 sq. metres and below |
| 134 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 135 | Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws |
| 136 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of thickness 4 mm |
| 137 | Applying priming coat : With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 138 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 139 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm |
| 140 | Upkeepingof surrounding area of 4 No. of "" D "" Type quarters atBalram township including cleaning of bathrooms, staircase, courtyard, garage, parking space, premises including collection of garbage and disposal to the dustbins inseven Days of a week by engaging sufficient numbers of manpower including cost of all necessary tools and supervision charges etc. all complete as per the direction of EIC :D type quarters Scope Of Work :- 03 No Unskilled labour deployed per Day |
| 141 | Labour charges for upkeeping of "N" joy club including cleaning of dustbin,floors toilets.Providing water to the visiters,including making tea snacks etc as per instruction of EIC. Scope of work : 02 No Unskilled labour deployed per Day . |
| 142 | Day to Day caretaking of Utakalika club by engaging manpower in two shifts per Day as per instuctio of EIC. Scope of work: (Manpower to be deployed 1 no. unskilled labour in each shift (1st shift & 2nd shift) |
| 143 | Sweeping, mopping, cleaning of toilet & all the floors, pavements including cleaning of surrounding area of Utkalika club as per instuction of EIC. Scope of work : 2 Nos. unskilled labour per Day. (sweeper)- |
| 144 | Supply and providing of black phenyl (BENGAL CHEMICAL Lamp brand) or its equivalent approved brand in sealed container of 100 ML capacity as per direction of Engineer-in-charge. . |
| 145 | Supplying of washing material for as per instruction of EIC. - Khadika: 06 nos per Months. For Utkalika, For N"JOY club |
| 146 | Supplying and providing harpic solution or its equivalent approved brandfor cleaning of toiletsas and when required basis as directed by Engineer-in-Charge. |
| 147 | Supplying of washing material for as per instruction of EIC. - Broom: 02 nos. per months. For Utkalika, For N"JOY club |
| 148 | Day to Day sweeping mopping cleaning of Dispensary building and its surroundings engaging sweeper 02 nos Unskilled labour dailyas per direction of EIC.Scope of Work :- 02 Nos Unskilled labour Per Day |
| 149 | Supplying of washing material for as per instruction of EIC Khadika. |
| 150 | Supplying of washing material for as per instruction of EIC Brooms. |
| 151 | Supplying of washing material for as per instruction of EIC mopping Brush. |
| 152 | Cleaning, Sweeping of pavement pathways, floors and surrounding ofTown administration office with instruction of EIC. Scope of the work :- Manpower per Day -Unskilled Labours 02 nos per Day |
| 153 | Cleaning, Sweeping of pavement pathways, floors and surrounding of meditation center andwith instruction of EIC. Scope of the work :- Manpower per Day -Unskilled Labours 02 nos per Day |
| 154 | Cleaning, upkeeping and Sweeping such aspavement pathways, floors, outside and inside grass cleaning surroundingof Booster pump house complexas per instruction of EIC. Scope of the work :- The agency has to engage 01 unskilled labour per Day |
| 155 | Cleaning, upkeeping and Sweeping such aspavement pathways, floors, outside and inside grass cleaning surroundingsof Substation complexas per instruction of EIC. Scope of the work :- The agency has to engage 01 unskilled labour per Day |
| 156 | Total impact of GST plus Labour Cess [@ 1 % (BOCW Cess to be deducted from the RA bill as per the value of the work progress)] for the purpose of CTC |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
