Military Engineer Services-MES has published Tender For Additional/Alternator To Bldg No P 45 Jcos Mess And P 46 Single Jcos Accommodation At Certain Location Under Ge (S) Binnaguri. Submission Date for this Tender is 16-05-2024. Mobile Generator Tenders in binnaguri West Bengal. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| 977872f3-e6fc-4d6f-b485-83901de1a7e5.html | Tender Notice | 0 KB |
| 8651.rar | Tender Document | 0 KB |
| BOQ_728696.xls | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames exc 1.5 Sqm and n.exc 4 Sqm (without taking off shutter from the frames) and removal off the site complete all as specified. |
| 2 | Taking down tarfelt with cement plaster from roof surfaces and lowering and removing the same toa distance exc. 500m and n. exc.900m incl roughening ofold concrete suirface of roofby wire brushing and cleaning the surface to remove all loose dust etc complete all as specified and as directed. |
| 3 | All as item No 1 here-in before but n.exc 1.5 Sqm each and removal off the site complete all as specified. |
| 4 | Taking down shutters and refixing in same openingof any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed. |
| 5 | Dismantling floor hearth or wall tiling including cement mortar bedding (incl backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.. |
| 6 | Taking down cement plaster any description on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed. |
| 7 | Dismantling wrought iron or mild steel work of any description not otherwise provided for grils.rails etc complete all as specified and as directed. |
| 8 | Demolition of precast concrete block/brick wallingbuilt in cement mortarof any description etc complete all as specified. |
| 9 | Dismantling of cement concrete of any size, position and any description complete all as specified and as directed. |
| 10 | Dismantling old PGI/CGI sheeting any gauge, thickness, including Nainital. Sikkim or similar pattern roof/facia and removal off the site complete all as specified. |
| 11 | M & L for hard core of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed. |
| 12 | M&L brickwork with sub class B bricks straight or curved on plan exc 6mtr mean radius built in cement mortar 1:6 by using old size bricks complete all as specified and as directed. |
| 13 | M&L for brick work with sub class "B" bricks using old size bricks, straight or curved on plan to any radius, built in CM 1:4 as in half brick thick wall complete all as specified and directed. |
| 14 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing on SI page No 156 of SSR Part-II completed. |
| 15 | S&F Solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specification and drawing on SI page No.160 of SSR Part-II completed. |
| 16 | M & L for fabrication and fixing of anodised powder coated aluminium door shutter fixed with rubber gasket, stopper, cleats, handles etc complete for aluminium frame of size 101.6 mm x 44.45 mm x2 mm and section of bottom and top rail iof section 114 mm x 44.45 mm x 2mm and lock rail shutter frame of 83 mm x 44.45 x 2 mm with and including panels of 5.5 mm thick plain/ forsted float glass, and with anodised aluminum snap beading of size 18.20 mm x 16.66 mm scred for fixing fully including all neceassaryfittings and EPDM rubber packing each shutter shall be provided with two decorative type aluminium disc handle of 150 mm dia per shutter, 1 no heavy duty door shutter 1 o 200 mm long aluminium tower bolt and 3nos 125 mm long stainless steel butt hinges per shutter including taking down old one complete all as specified and as directed. |
| 17 | S&F Powder coated aluminium louvered ventilators of size 600X600mm with glass louvers, without sash bars of aluminium sections weighing not less than 0.605kg/m for frame of size 40x20x2mm including necessary jointing cleats, glazingcleats, rubber packing , anodised aluminium snap beading,screws, anodised aluminium fittings and 5.5mm thick tinted glass fixed in panels with suitable locking arrangementsincluding taking down of old existing steel ventilator and making good disturbed surface of wall complete all as specified and as directed. |
| 18 | S&F Powder coatedaluminium window sliding type three track (2 glazed & one gauze shutter ) aluminium sections weighing not less than 1.67kg/m for frame and 0.55 kg/m for shutter including necessary jointing cleats, glazingcleats, rubber packing , screws, handle, locking arrangement and 5.5mm thick plain/tinted glass and aluminium mosquito proof gauge including taking down of old existing steel window and making good disturbed surface of wall complete all as specified and as directed. |
| 19 | S&F for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 105 x60 mm. |
| 20 | S&F for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 125 x60 mm. |
| 21 | M&L for plain, framed, factory made panelled shutters 35 mm thick (any number of panels) , with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats. |
| 22 | S&F second class hardwood, factory made glazed and skelton shutters 35 mm thick open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I Section8, Clause 8.20 (a) suppliedand fitted to chowkats complete all as specified and as directed. |
| 23 | M&L for 150 mm size aluminium anodised cast type handles complete all as specified and as directed. |
| 24 | S&F of 150mm long aluminium anodised,barrel tower bolt of extruded section complete all as specified and as directed. |
| 25 | S&F250mm long aluminium anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section complete. |
| 26 | S&F 100mm size stainless steel butt hinges medium weight complete all as specified and as directed. |
| 27 | M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar (1:6) finished even & fair complete all as specified and as directed. |
| 28 | M&L for rendering 20mm thick in cement mortar 1:4 in two layers of 10mm each using WPC in finishing layer on brick or concrete surfaces finished even & fair (WPC for finishing layer will be paid seperately as supply only). |
| 29 | Supply only integral water proofing compound complete all as specified and as directed. |
| 30 | M&L for 5mm thick in CM 1:3 in ceiling finishing the surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 31 | M&L applying two coats of weather proof exterior emulsion paint of standard quality and make ,over a coat of white primer including preparation of new wall surfaces complete all as specified and directed. |
| 32 | M& l for two coat of Oil boound distember on new wall surface including preperation of the surface all as directed and specified. |
| 33 | M&L for applying 1.0 mm thick wall care putty on new or old wall surface complete all as directed and specified . |
| 34 | Complete removal of existing treatment from plastered or unplastered surfaces of walls including cleaning with scrapers, any number of coats and any width or girth etc and applying two coats of oil bound distemper over a coat of primer oversuper fine Birla or altek putty finish as required and completeall as specified and as directed . |
| 35 | M&L for 10mm thick screed bed or bedding layers in cement mortar (1:4) in order to maintain proper slope over existing roof surfaces for applying single componentacrylic polymer modified, finished even and smooth without using extra cement complete all as specified and as directed. (NOTE : Polymeric membrane shall be measured and paid separately under relevant item of this Schedule "A"). |
| 36 | M & L water proofing treatment to RCC roof slab including parapet comprising of the following course of treatement / specified from bottom to top (a) Applying Bituminous primer @ 0.40 Ltr per Sqm over plastered surfaces of roof including parpet surfaces. Bituminious primer shall be "Tar Mastic" manufactured by M/S STP LTD or "EMW FLATE" manufactured by M/S Texsa India Ltd. (b) Over the priming coat laying one layer APP based polymeric membrance of approved manufacturer, 3mm thick of weight not less than 3.60 Kgs/Sqm reinforced with non woven polyester fabric weight not less than 160 gms per Sqm. Polymeric members shall be taken to a height of 60cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrance flashing. (c)Application of two coat of bituminous aluminium paint over the polymeric membrane after necessary preparation and cleaning.Note :- (i) Laying APP based polymeric membrance shall be done by torch on method or as per manufacturers instructions. (ii) A minimum overlap of 100mm shall be made at the end and 75mm shall be made at the sides of the polymeric membrance respectively and sealed all ovelaps and joints as per Manufacturers instructions. (iii) APP based polymeric membrance shall be "SUPER THERMOLAY" manufactured by M/S STP LTD or MOPLYFP manufactured by M/S Texsa India Ltd. |
| 37 | M&L for cutting out cracks to "V" section (shape) in existing roof slab terracing cleaning out and filling solidely with cement and sand mortar (1:1) complete all as specified and as directed. |
| 38 | M&L 25 mm thick PCC 1:2:4 type B0 (Using 12.5mm graded stone aggregate) as in floors as levelling course for roof treatment complete all as specified and as directed. |
| 39 | Material and labour for preparation of old plastered ceiling surfaces by brooming down or steel wire brushing: scrapping down smoke soot, mould, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as directed . |
| 40 | M&L applying two coats of weather proof exterior emulsion paint over a coat of white primer including preparation of old wallsurfaces complete all as specified and directed. |
| 41 | M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface over 10cm width or girth complete all as specified and as directed. |
| 42 | M&L for three coat of white wash on walls on newly plastered surface incl preparation of surface. |
| 43 | M&L for applyingthree coat of white washing including preparation of new or previously untreated surface of ceiling. |
| 44 | Material & labour for preparation of old painted surfaces of wood & wood based materials over 10 cm width or girth and applying one coat of synthetic enamel paint completeall as directed . |
| 45 | M&L for two coats of synthetic enamel painting to new wooden surfaces over a coat of pink primer including preparation of surfaces area exc 10cm width & girth complete all as specified and as directed. |
| 46 | M&L for non-skid ceramic coloured (400x400x7 to 8 mm thick)tiles set and jointed in neat cement slurry pointed in white or coloured cementto match in floor over 15mm thick screed bed in CM(1:6) all as specified and directed. |
| 47 | M&L for glazed colouredceramic tiles (350x450x7mm thick)on vertical surfaces such as skirting/dado set and jointed in neat cement slurry pointed in white or coloured cement to match over 15mm thick rendering in CM(1:4) all as specified and directed. |
| 48 | M& L vetrified ceramic tiles 10 mm thick (square/rectangular) light shade, area of each tiles not exceeding 0.36 sqm in floor etc set and jointed in neat cement sluury and pointed in white or coloured cement to match complete over 15mm thick screed bed in CM(1:6) all as specifierd and as directed. |
| 49 | All as per item no 48 but as in skirting 10 cm height complete all as specified and as directed. |
| 50 | M&L for joint freenon-skid ceramic tiles any selectedcolour(600x600x7 to 8 mm thick)tiles set and jointed in neat cement slurry pointed in white or coloured cementto match in floor over 15mm thick screed bed in CM(1:6) all as specified and directed. |
| 51 | All as item No 50 here-in before buton vertical surfaces but on 10mm thick rendering in CM (1:4) complete.(Size =600x100mm) complete all as specified and as directed. |
| 52 | M & L for 18 to 20 mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms,corner shelf,Flat shelf and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 15 mm thick cement plaster (1:4)including rounded the exposed surfaces of granite complete all as specified. |
| 53 | All as per item no 52 butas in skirting ( 12 to 15 mm thick) but on 10 mm tkick rendering/ back coating in CM (1:4) complete all as specified and as directed. |
| 54 | M&L for providing machine cut polished Kota stone slab 18-20mm thick over cement screed bed and laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 15mm thick screed bed complte. |
| 55 | All as per item No 54 but in narrow width of vertical surfaces complete all as specified and as directed. |
| 56 | Supply and fix 0.50mm thick prepainted galvalume polyester coated (SMP coating) coloured metal roofing sheet trapezoidal profile having tensile strength 550Mpa as in roof covering fixed with self drilling screws with EPDM washer etc complete all as specified. |
| 57 | M&L for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering , eaves boards, velly gutter, and other similar works fixed with self tapping screws/J hooks complete all as specified and as directed. |
| 58 | M&L for 25 mm thick PCC (1:2:4) type B1 ( 20mm graded stone aggregate) , finished concrete surfaces even androughto receive floor finishes. |
| 59 | M&L for 75mm thick PCC type C-2 (1:3:6) using 40 mm graded agg in plinth protection path/hardstanding finished cement concrete surfaces fair and even all as directed by Engineer-in-Charge. |
| 60 | S&Fwash hand basin, vitreous china, white, flat back (550x400mm) cutting for and pinning ends of brackets(Make:Parryware Code No.-0471,Indus Basin (white) or equivalent and waste fitting,brass chromium plated for glazed ware basin etc with long screwed shanks and fly nuts,flange end bedded in red lead cement and other end fixed 32mm including PVC waste pipe with CP /PTMTcoupling of required length. |
| 61 | M&Lfor CI Nahani trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1(diameter of outlet100mm) as in repair |
| 62 | Supply & fixin repair angular stop cock made of brass chromium plated screwed both ends for iron pipe for 15mm bore complete all as directed . |
| 63 | Supply & fix Bib tapcast copper alloy, chromium plated with crutch or butterfly handle, screwed down for 15mm bore GI Pipe or for brass ferrule including taking down old unserviceable one. |
| 64 | S&F of PVC low level flushing cistern, 10 ltr capacity, syphonic action type white body with inlet ball valve, float , handle,bracket, longflush pipe of PVC to suit flushing cistern ( long bend) etc complete & connecting to WC |
| 65 | S&F in repairVitreous china wash down water closet pan (pedesatal pattern) (EWC)white including plastic water closet seat cover closed pattern with flat bottom, and cover and mild steel chromium plated hinging divice etc complete fixed in repairs. |
| 66 | S&F in repair PVC seat cover for pedestal pan, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminiumisedhanging device complete all as directed. |
| 67 | Supply and fixin repair CP Health Faucet of premium quality and make Jaquar or equivalent including two way bib cock and PVC telephonic flexible tube fixed to 15mm bore pipe. |
| 68 | S&F in repairs for 15 mm bore stop cocks fancy type, chromium plated reduce body, long shank, cap (concealed type) screwed down high pressure screwed both ends for iron pipe or for union etc as in repair. |
| 69 | S&Fin repair tubular towel rail 20mm dia D type, Brass Chromium Plated 60 cm long between flanges. |
| 70 | S & F in repair stainless steel soap dish best quality fixed to plugs with chromium plated brass complete all as specified and directed |
| 71 | S&Fof PVC connections 15 mm size with PTMT nuts of length 600 mm. |
| 72 | S&FWater Closet (squatt pattern) of vitruous china squatting pan of pattern "ORRISA" pattern size 580 x 440 mm white with integral foot rests (excluding flushing cirstern and flush pipe) including connection to trap and flushing pipe anti syphon pipe etc complete including trap set in and incl concrete complete all as specified and directed. |
| 73 | S&F 600 x 450mm bevelled edge mirror of selected quality glass mounted on 6mm thick AC bldg board or commercial plywood and fixed to wooden plug with chromium plated brass screws & cup washers. |
| 74 | M&LGun-metal, globe or gate valves,15mm borewith iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as direcetd. |
| 75 | S&F in repair ofswivel shower of CP with shower arm 150 mm size for fixing with 15 mm bore GI pipe complete all as specified and as directed. |
| 76 | Supply and fix PVC (SWR) pipes 110mm dia,type "A" conforming to IS, single socketed,in anylength with rubber ringjointslaid in trenches or floor complete all as specified. |
| 77 | S&F for PVC (SWR) bends any radius fixed to PVC Pipes/Steel Gutters etc complete all as directed(Bore of pipe 110mm) |
| 78 | S&F for PVC (SWR) vent cowl fixed to PVC Pipes etc complete all as directed (Bore of pipe 110mm) |
| 79 | Taking up or down15mm bore steel water tubings and fittings etc complete and makinggood disturbed surfaces of walls/ceilings etc complete all as specified and as directed. |
| 80 | ---Ditto all as per item No 79.00 above but for 20mm bore |
| 81 | M & L for 15mm bore steel tubing medium grade,galvanised fitting fixed complete to walls and ceiling or floor complete |
| 82 | ---Ditto all as per item No 81.00above but for 20mm bore |
| 83 | M&L for mild steel rolled sections conforming to Fe - 410 (Gde E-250) as in main and cross beams, hip and jack rafters;verticals , purlins where connected to common rafter and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates. |
| 84 | Material and labour as in repair for hoisting and fixing rotational moulded polyethylene(double layer) LLDPE water storage tanks 500 lit capacity (Cylinderical vertical with polythene foam insulation as intermediate layer), ISI marked(IS-12701:1996) hoisted and fixed in position including inlet, oulet and over flow connection etccomplete all as specified. |
| 85 | Supply and fix for ball valve 20mm dia high pressure with HDPE ball and epoxy coated aluminium rod complete all as specified. MakePolytuf Cat No 1012(b)or equivalent. |
| 86 | M & L 80 mm thick M-40 grade factory made vibratory compacted cement concrete rubber moulded, interlocking paver block any shape and size confiroming to IS 15658-2006 with grey cement and pigment as approved laid over and incl 50 mm thick consolidated sand cushion and joints filled with sand complete all as specified and directed. |
| 87 | M & L for TMT bars 10mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or secuiring with clips equality conforming to TMT bars complete all as specified and as directed. |
| 88 | Material and labour forprecast reinforced cement concrete (nominal mix) Type A11:1.5:3(20mm graded stone aggregate) as in slab for coocking plform , slab suspended on walls etc including necessary formwork complete all as specified. Note:- Reinforcement shall be measured and paid for separately. |
| 89 | Demolition of cement concrete(Reinforced) of any description in any position not otherwise specifically provided complete all as specified and as directed. |
| 90 | S&F in repair brass chromium plated central hole basin mixer for WHB complete all as specified and directed. |
| 91 | Supply and fix as in repair for vitreous china, bowl urinal flat back, size 440 x 315 x 265mm white with union and grating for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, securing urinal to plugs with and incl, 60 mm long brass screws, pointing around urinal back in cement mortar 1:2 all as specified. Make: Hindware Cat No 60001 or equivalent. |
| 92 | M & L for providing plain cementconcrete type C-1, 1:3:6, (using 20 mm graded stone aggregate), as in copings, bed block for filing hollow space of steel chowkhats, fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed. |
| 93 | S&F as in repair for 15mm bore pillar (basin mixture) taps brass chromium plated with 3” long pipe with aerator. Make:-ESSCO Cat No MQT 516A or equivalent. |
| 94 | Form work to sides and soffit of beams, lintels,shelves of slabs/beams and similar works including supports, over hangs etc rough finished surfaces of concrete,flat.etc complete all as specified and as directed. |
| 95 | S&F Framed work such as grills,gratings, etcwith ends of bars shouldered and/or riveted,or forged into spikes; framedguard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 96 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed. |
| 97 | M&L for point wiring with 1.5 sqmm single core PVC insulated unsheathed FR-LS cable 1100 volts grade (ISI marked) with multistranded copper conductor with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit and conduit accessories (ISI Marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI Marked) with proper colour coding as earth continuity conductor connected to common earth dolly, modular sheet steel sunken terminal box of appropriate size suitable for modular switch/ fittings concealed in walls, with modular back plate, top cover fixed flush to wall for housing switches, socket outlets, fan regulators etc duly earthed including cutting chases of existing wall for for conduits and sinking for boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCB"s or bus bar shall be done through proper size copper/brass thimbles all as specified and as directed for One light point controlled by one way switch 5/6 amps. |
| 98 | ---Ditto--- all as per item No 97.00 above but for One ceiling fan/Exhaut fan point controlled by one way switch 5/6 amps. |
| 99 | ---Ditto--- all as per item No 97.00 above but for One socket out let 5/6 amps point on the same board |
| 100 | ---Ditto--- all as per item No 97.00 above but for One socket out let 5/6 amps point on the independent board |
| 101 | ---Ditto--- all as per item No 97.00 above but for One bell/buzzer point controlled by one bell push button |
| 102 | ---Ditto--- all as per item No 97.00 above but forabove but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified and directed. |
| 103 | S&F of Modular switch, single pole, one way, 6 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed. |
| 104 | S&F of Modular shuttered Socket outlet 5 Pin, 6 Amp, 2 Module, 230 volts, ISI marked complete all as specified and as directed. |
| 105 | S&F of Modular shuttered Socket outlet 6 Pin, 6/16 Amp, 2 Module, 230 volts, (ISI marked) complete all as specified and as directed. |
| 106 | S&F of Modular switch, single pole, one way, 16 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed. |
| 107 | S&F of Modular bell push, one way, 6 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed. |
| 108 | S&F of call bell ding dong typeAC Single pole 220/240 Volts, surface type complete all as specified and directed. |
| 109 | S&FCeiling rose, surface type with back plate, three terminal /PVC/ polycarbonate, isolated body complete all as specified and directed. |
| 110 | S&F, IP 20, class I, LED tube light fittings 20W (or nearest next higher wattage) (4feet), wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified. |
| 111 | S & F LED street light fittings 35 Watt ,230 VAC outdoor type with high pressure die cast aluminium housing, heat resistant, toughned glass cover with IP66 protection complete all as spedified and as directed. |
| 112 | S&F IP 20, Class I, LED Mirror light fitting10 W, (or nearest next higher wattage) wall /Surface mounted with aluminium housing 2 feet long, integrated type, with high efficiency PMMA diffuser,integrated high efficiency electronic driver & surge suppressor of 2 KV or more, luminaire efficacy > 95 lumens/Watt, power factor >/ 0.90, operating range – 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/square blocks, screws etc with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size including necessary taking down the old unserviceable fitting complete all as specified. |
| 113 | S&F in repair Decorative luminiare suitable for wall lightfixture including LED lamp 1x10/15 watt ( B-22 base) ,made of unbrakeable Polycarbonate with Acrylic decorative diffuser, IP-65 protection, and provision of PVC insulated sheathed round flexible wire with multi stranded copper conductor of size 2.50 Sq mm two core complete all as specified and directed Make : Havells, cat part No.LHDL06160099 or equivalent |
| 114 | S&F Sheet metal enclosure for 8 way Distribution Boards (DB’s), double door, single pole & neutral with din rail, IP-20 protection suitable for fixing MCB"S/lsolators completeincluding taking down the old one complete all as specified and directed . |
| 115 | Supply and Fixing in repair MCB DB double door, powder coated sheet metal enclosure, 4 way 240 volts grade Triple pole and neutral with din rail,IP 20 protection fixed to wall using nuts & bolts and washer of suitable dia and grouted to wall using suitable gutties complete including taking down the old one complete all as specified and directed . |
| 116 | S&F MCB, Triple pole & neutral,32 amps, 415 volts, ‘C’ curve, 10 KA all completeincluding taking down the old one complete all as specified and directed . |
| 117 | S&F MCB, Single pole & neutral 6 to32 amps, 240 volts, ‘C’ curve, 10 KAall completeincluding taking down the old one complete all as specified and directed. |
| 118 | S&F MCB, Single pole, 6 to32 amps, 240 volts, ‘C’ curve, 10 KAall completeincluding taking down the old one complete all as specified and directed. |
| 119 | M &L for Earthing complete with GI earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25M deep below normal ground level) with top edge of the plate not less than 1.5m below normal GL. Connected to galvanized earth lead wire 4mm dia by means of nut, bolt, check nut and washersincluding necessary excavation and earth work in soft/loose soil, GI protection pipe light grade 15mm bore for protecting the GI wire mesh funnel alternate layer of charcoal dust, and saltPCC pit 1:3:6 type C1 using 20mm graded stone aggregate and 50mm thick RCC 1:2:4 type BO using 20mm graded stone aggregate cover re-inforced with 8 mm dia MS TMT bars 80mm C/C both ways complete all as specified and shown in Electrical plate No.3 SSR part-1 and connected to the earth point and testing complete including taking out the old one complete all as specified and directed . |
| 120 | M & L Sub main wiringconcealed type with two run single core cable PVC insulated cable with6.0Sqmm (Nominal area) multi stranded copper conductor FRLS cable 1100 volts gde incl earth continuity conductor using PVC insulatedcable of stranded copper conductor of size 6.0 Sqmm connected to common earth dolly anddrawing into rigidPVC conduitsof 25 mm dia medium gradesize,making good the disturbed surfacescomplete including taking down old submain wiring.(NOTE : Two run of submain wiring cable alongwith one run of earth wire shall be measured as one length. . |
| 121 | M&L for street light bracket made out of GI pipe light grade 32 MM dia 1.2 mtr length bent to shape and reduced to required size at top upto 1.2 mtr length by cutting, welding and well finishing including MS clamp of flat iron of size 25 x 5 mm suitable length 2 Nos complete with drilling hole, fixing with runts bolts and washers including painted with two coats aluminium paint over a coat of red oxide primer. |
| 122 | Supply, laying, jointing & testing in trenches or passing through pipe, 1100 volts grade, XLPE insulatedPVC bedded, galvanized steel strip or wire armoured LT electric power UG cables, heavy duty with stranded aluminium conductor of cross sectional area 25 sqmm 4 core with and including all fixing & connecting accessories such as Aluminium cable lugs, cable gland, nut, bolts, washer etc complete including taking out unsu cable as specified and as directed. |
| 123 | Excavation in trenches in soft/loose soil not exc. 1.5 metre wide and not exc. 1.5 metre in depth and getting out for taking up / layingunder ground electric cable complete all as specified and as directed. |
| 124 | Returning, filling in, including spreading levelling watering and well rammming in layers not exceeding 25 cms in depth complete all as specified and as directed. |
| 125 | Removing surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and as directed. |
| 126 | Supply and lay dry river sand filling for under ground cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and as directed. |
| 127 | Supply and laying sub class B bricks of size 25cmx12.5cmx7.5cm (+/-10% tolerance) for protection of UG cable with width equal to length of bricks as mechanical protection laid dry and flat complete all as specified and as directed. |
| 128 | S & F exhaust fan , plastic body AC single phase, 230 V of size 300 mm sweep with blades and frames and louvers complete including cutting exhaust fan hall in wall complete all as specified |
| 129 | Supply installation, commissioning and testing of electric water heater, storage vertical type, BEE 5 star rated 25 ltrs capacity 230 volts AC 50 Hz comprising of high wattage heating element for instant heating extra thick SS inner tank of superior 304 grade, rust & shock proof ABS outer body, non- ferrous prewssure plate with and including provision of 02 Nos grouting bolts suitably flush to wall or any other surfaces and connection pipe for hot and cold water supply 25 lts BEE 5 Star rated complete stranded copper conductor cable/ flexible chord complete all as specified and as directed. |
| 130 | M&L for GI water tubing medium grade 15 mm dia fixed on wall with all fittings and fixtures complete all as specified and directed. |
| 131 | S&F stop valve but fancy type, chromium plated, screwed down (CP) of size15 mmfancy type complete all as specified and directed. |
| 132 | M&L bib taps , cast copper alloy with butterfly handle , screwed down, screwed for iron pipe or for brass ferrule and fixed for bib tap 15 mm dia fancy type all as specified and as directed. |
| 133 | M&L for 40 mm bore steel tubing light grade ISI marked for protection of cable including necessary joints complete all as specified and as directed. Make: Tata/Jindal/Bansal |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
