Military Engineer Services-MES has published Tender For Repair / Replacement Of Water Pipeline Of Md Accn At Mil Stn Sri Ganganagar. Submission Date for this Tender is 15-05-2024. Water Pipe Line Tenders in ganganagar Rajasthan. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| 870b58d2-e88d-4fa3-859d-aae688234bd6.html | Tender Notice | 0 KB |
| BOQ_728721.xls | Tender Document | 0 KB |
| GenPage1.pdf | Tender Document | 0 KB |
| GenPage2.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Excavation in trenches in soft/loose soil n.exc. 1.5 m wide & n. exc. 1.5m in depth for foundation etc n. exc 10 sqm on plan getting out complete all as specified and directed by Engineer - in - Charge |
| 2 | Returning, filling in, including spreading, levelling, watering and well ramming in layers n. exc. 25cm in soft/loose soilcomplete all as specified and directed by Engineer - in - Charge |
| 3 | Removing excavated material n. exc. 50 m & depositing where directed at a leveln. exc. 1.5 m above the starting point complete all as specified and directed by Engineer - in -Charge. |
| 4 | M&L for repair to unserviceable sluice valve of size 100mm bore by dismantling and opening the gland cap and head of sluice valve and taking out the unserviceable lock nut, fitting the materialand fixing new (if required)serviceable spindle &lock nut , grinding the material cutting the threads by lathe machine and fabrication of new lock nut with cutting the threads inside the lock nut according to the spindle threads and refixing in the same position, testing the sluice valve, complete all as specified and directed by Engineer - in -Charge. |
| 5 | M&L for repair to unserviceable sluice valve of size 150mm bore by dismantling and opening the gland cap and head of sluice valve and taking out the unserviceable lock nut, fitting the materialand fixing new (if required)serviceable spindle & lock nut , grinding the material cutting the threads by lathe machine and fabrication of new lock nut with cutting the threads inside the lock nut according to the spindle threads and refixing in the same position, testing the sluice valve, complete all as specified and directed by Engineer - in -Charge. |
| 6 | M&L for repair to unserviceable sluice valve of size 200mm bore by dismantling and opening the gland cap and head of sluice valve and taking out the unserviceable lock nut, fitting the materialand fixing new (if required)serviceable spindle & lock nut , grinding the material cutting the threads by lathe machine and fabrication of new lock nut with cutting the threads inside the lock nut according to the spindle threads and refixing in the same position, testing the sluice valve, complete all as specified and directed by Engineer - in -Charge. |
| 7 | M&L for repair to unserviceable sluice valve of size 250mm bore by dismantling and opening the gland cap and head of sluice valve and taking out the unserviceable lock nut, fitting the materialand fixing new (if required)serviceable spindle & lock nut , grinding the material cutting the threads by lathe machine and fabrication of new lock nut with cutting the threads inside the lock nut according to the spindle threads and refixing in the same position, testing the sluice valve, complete all as specified and directed by Engineer - in -Charge. |
| 8 | S&F in replacement, cast iron non return valve /reflux valve with rubber seat flanged type without bypass arrangement PN 1.6 rating confirming to IS:5312/2004 of size 200 mm dia complete with gasket, nut, bolts and washers etc as required at site complete all as specified and directed by Engineer-in-charge. |
| 9 | S&F in replacement, cast iron non return valve /reflux valve with rubber seat flanged type without bypass arrangement PN 1.6 rating confirming to IS:5312/2004 of size 150 mm dia complete with gasket, nut, bolts and washers etc as required at site complete all as specified and directed by Engineer-in-charge |
| 10 | S&F in replacement, cast iron non return/reflux valve with rubber seat flanged type without bypass arrangement PN 1.6 rating confirming to IS:5312/2004 of size 100 mm dia complete with gasket, nut, bolts and washers etc as required at site complete all as specified and directed by Engineer-in-charge. |
| 11 | S&F in replacement cast iron foot valve lift flanged type of size 200mm bore as per IS 4038 complete all as specified and directed by Engineer-in-charge |
| 12 | S&F in replacement cast iron foot valve lift flanged type of size 150mm bore as per IS 4038 complete all as specified and directed by Engineer-in-charge |
| 13 | S&F in replacement cast iron foot valve lift flanged type of size 100mm bore as per IS 4038 complete all as specified and directed by Engineer-in-charge |
| 14 | S & F in replacement CI sluice valve class PN -1.6 ISI marked complete suitable for 300 mm bore of pipe with flanged ends and drilled stainless steel spindle CI gate with brass ring and cast iron cap etc complete all as specified duly fixed at site with rubber flanges, nuts / bolts and washers including repair to disturbed surfaces and testing on completion complete all as specified and directed by Engineer-in-charge. |
| 15 | S & F in replacement CI sluice valve class PN -1.6 ISI marked complete suitable for 250 mm bore of pipe with flanged ends and drilled stainless steel spindle CI gate with brass ring and cast iron cap etc complete all as specified duly fixed at site with rubber flanges, nuts / bolts and washers including repair to disturbed surfaces and testing on completion complete all as specified and directed by Engineer-in-charge. |
| 16 | S&F in replacement CI sluice valve class PN -1.6 ISI marked complete suitable for 200 mm bore of pipe with flanged ends and drilled brass spindle CI gate with brass ring and cast iron cap etc complete all as specified duly fixed at site with rubber flanges, nuts / bolts and washers including repair to disturbed surfaces and testing on completion complete all as specified and directed by Engineer-in-charge. |
| 17 | S&F in replacement CI sluice valve class PN -1.6 ISI marked complete suitable for 150 mm bore of pipe with flanged ends and drilled brass spindle CI gate with brass ring and cast iron cap etc complete all as specified duly fixed at site with rubber flanges, nuts / bolts and washers including repair to disturbed surfaces and testing on completion complete all as specified and directed by Engineer-in-charge. |
| 18 | S&F in replacement CI sluice valve class PN -1.6 ISI marked complete suitable for 100 mm bore of pipe with flanged ends and drilled brass spindle CI gate with brass ring and cast iron cap etc complete all as specified duly fixed at site with rubber flanges, nuts / bolts and washers including repair to disturbed surfaces and testing on completion complete all as specified and directed by Engineer-in-Charge. |
| 19 | S & F in replacement CI sluice valve class PN -1.6 ISI marked complete suitable for 80 mm bore of pipe with flanged ends and drilled brass spindle CI gate with brass ring and cast iron cap etc complete all as specified duly fixed at site with rubber flanges, nuts / bolts and washers including repair to disturbed surfaces and testing on completion complete all as specified and directed by Engineer-in-Charge. |
| 20 | M&L for surface dressing n. exc.15 cm deepin soft/loose soil any terrain complete all as specified and directed by Engineer-in-Charge . |
| 21 | M&L for cleaning of raw water channelavg width 1.2mand avg depth of mud/silt n exc 30cm and avg 15 cm deep removing siltas per existing depth and removing buds and other foreign materials from the raw water channel complete all as specified and directedby Engineer-in-charge |
| 22 | Removing vegetations/bushes/foreign materials etc around the periphery/path of raw water reservoirs 130 Lacs Gallon cap (size of reservoir 136mtrx136mtr),clear water complex, pump houses etcthrowing the wastage at a distance not less than 50 mtr as and where complete all as specified and directed by Engineer-in-Charge. Note -T&P and safety equipment required for the work is to be provided by the contractor. |
| 23 | S&Fin replacement, DI fitting of any size suitable for spigot and socket or flanged pipes etc complete all as specified and directed by Engineer-in-Charge |
| 24 | S&Fin replacement, cast iron fitting of any size suitable for spigot and socket or flanged pipes etc complete all as specified and directed by Engineer-in-Charge |
| 25 | S&F in replacement of valve pit/ water sump cover of mild steel Sheet of existing thickness duly supported with MS Angles ofexisting size fixed on mild steel angle of suitablesize complete all as specified and directed by Engineer-in-Charge |
| 26 | Dismantling existing valve pit and M&L for construction of valve pit having inside dimensions600 x600x600 mm comprising of mild steel sheet cover of size 3.0mm thick fitted on mild steel angle 40 mm x 40 mmx 6 mm size with hinges and locking arrangement including painting with 2 coats of synthetic enamel paint over a coat of red oxide primer and coping with PCC 1 : 2 : 4 type B-1 and brick work with sub class "B" in cement mortar 1 : 4, internal plastering 15mm thick in cement motar 1 : 3 finished even and smooth without using extra cement and two coats of white wash to internal surfaces of valve pit including preparation and PCC 1:3:6 type C1 as in foundation all as per existing patterncomplete all as specified and directed by Engineer-in-Charge.(Note-Cost of earth work and dismantling of damaged valve pit shall be deemed to be included in quoted rate of item.) |
| 27 | Dismantling existing valve pit and M&L forconstruction of valve pit having inside dimensions900 x900x1000 mm comprising of mild steel sheet cover of size 3.0mm thick fitted on mild steel angle 40 mm x 40 mmx 6 mm size with hinges and locking arrangement including painting with 2 coats of synthetic enamel paint over a coat of red oxide primer and coping with PCC 1 : 2 : 4 type B-1 and brick work with sub class "B" in cement mortar 1 : 4, internal plastering 15mm thick in cement motar 1 : 3 finished even and smooth without using extra cement and two coats of white wash to internal surfaces of valve pit including preparation and PCC 1:3:6 type C1 as in foundation all as per existing patterncomplete all as specified and directed by Engineer-in-Charge.(Note-Cost of earth work and dismantling of damaged valve pit shall be deemed to be included in quoted rate of item.) |
| 28 | Dismantling existing valve pit and M&L for construction of valve pit having inside dimensions1200x1200x1200 mm comprising of mild steel sheet cover of size 3.0mm thick fitted on mild steel angle 40 mm x 40 mmx 6 mm size with hinges and locking arrangement including painting with 2 coats of synthetic enamel paint over a coat of red oxide primer and coping with PCC 1 : 2 : 4 type B-1 and brick work with sub class "B" in cement mortar 1 : 4, internal plastering 15mm thick in cement motar 1 : 3 finished even and smooth without using extra cement and two coats of white wash to internal surfaces of valve pit including preparation and PCC 1:3:6 type C1 as in foundation all as per existing pattern. complete all as specified and directed by Engineer - in -Charge. (Note-Cost of earth work and dismantling of damaged valve pit shall be deemed to be included in quoted rate of item.) |
| 29 | S&F in replacement 15mm bore Stop valvescast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by Engineer-in-Charge. |
| 30 | S&F in replacement 20mm bore Stop valvescast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by Engineer-in-Charge. |
| 31 | S&F in replacement 25mm bore Stop valvescast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by Engineer-in-Charge. |
| 32 | S&F in replacement 40mm bore Stop valvescast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by Engineer-in-Charge. |
| 33 | S&F in replacement 50mm bore Stop valvescast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by Engineer-in-Charge. |
| 34 | S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for 50 mm bore GI pipe/ cast iron pipe/special with nuts, bolts etc complete all as specified and directed by Engineer - in -Charge. |
| 35 | S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for 80 mm bore GI pipe/ cast iron pipe/special with nuts, bolts etc complete all as specified and directed by Engineer - in -Charge. |
| 36 | S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for100 mm bore GI pipe/ cast iron pipe/special with nuts, bolts etc complete all as specified and directed by Engineer - in -Charge. |
| 37 | S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for 150 mm bore GI pipe/ cast iron pipe/special with nuts, bolts etc complete all as specified and directed by Engineer - in -Charge. |
| 38 | S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for 200 mm bore GI pipe/ cast iron pipe/special with nuts, bolts etc complete all as specified and directed by Engineer - in -Charge. |
| 39 | S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for 300 mm bore GI pipe/ cast iron pipe/special with nuts, bolts etc complete all as specified and directed by Engineer - in -Charge. |
| 40 | S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for 400 mm bore GI pipe/ cast iron pipe/special with nuts, bolts etc complete all as specified and directed by Engineer - in -Charge. |
| 41 | Taking up or down CI pipe with connections of size 400 mm bore complete all as specified and directed by Engineer-in-Charge. |
| 42 | Taking up or down CI pipe with connections of size 300 mm bore complete all as specified and directed by Engineer-in-Charge. |
| 43 | Taking up or down CI/GI pipe with connections of size 200 mm bore complete all as specified and directed by Engineer-in-Charge. |
| 44 | Taking up or down steel tubing and connections of size 100 tto 150 mm bore complete all as specified and directed by Engineer-in-Charge. |
| 45 | Taking up or down steel tubing and connections of size 80 mm bore complete all as specified and directed by Engineer-in-Charge. |
| 46 | Taking up or down steel tubing and connections of size 50 mm bore complete all as specified and directed by Engineer-in-Charge. |
| 47 | Taking up or down steel tubing and connections of size 40 mm bore complete all as specified and directed by Engineer-in-Charge. |
| 48 | Taking up or down steel tubing and connections of size 25 mm bore complete all as specified and directed by Engineer-in-Charge. |
| 49 | Taking up or down steel tubing and connections of size 20 mm bore complete all as specified and directed by Engineer-in-Charge. |
| 50 | Taking up or down steel tubing and connections of size 15 mm bore complete all as specified and directed by Engineer-in-Charge. |
| 51 | M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings complete, laid in trenches, complete all as specified and directed by Engineer - in -Charge. |
| 52 | M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings complete, laid in trenches, complete all as specified and directed by Engineer - in -Charge. |
| 53 | M&L for galvanized steel water tubing medium grade of 25mm bore with & including all fittings complete, fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer - in -Charge. |
| 54 | M&L for galvanized steel water tubing medium grade of 40mm bore with & including all fittings complete, fixed to walls and ceilings or laid in floorscomplete all as specified and directed by Engineer - in -Charge. |
| 55 | M&L for galvanized steel water tubing medium grade of 50mm bore with & including all fittings complete, laid in trenches,complete all as specified and directed by Engineer - in -Charge. |
| 56 | M&L for galvanized steel water tubing medium grade of 80mm bore with & including all fittings complete, laid in trenches, complete all as specified and directed by Engineer - in -Charge. |
| 57 | M&L for galvanized steel water tubing medium grade of 100mm bore with & including all fittings complete, laid in trenches complete all as specified and directed by Engineer - in -Charge. |
| 58 | M&L for galvanized steel water tubing medium grade of 150mm bore with & including all fittings complete, laid in trenches complete all as specified and directed by Engineer - in -Charge. |
| 59 | M&L for laying ductile iron pipe spigot & socketed size 400 mm bore, class K-9 includingrubber tyton jointsduly ISI marked complete all as specified and as directed by Engr-in-Charge. |
| 60 | M&L for laying ductile iron pipe spigot & socketed size 300 mm bore, class K-9 includingrubber tyton jointsduly ISI marked complete all as specified and as directed by Engr-in-Charge. |
| 61 | M&L for laying ductile iron pipe spigot & socketed size 200 mm bore, class K-9 includingrubber tyton jointsduly ISI marked complete all as specified and as directed by Engr-in-Charge. |
| 62 | M& L for excavation and making proper space to rectify the leakage of cast iron pipe of size 300 mm to 400 mm bore spigot and socked end inclduing all required material to rectifiy the leakage complete all as specified and directed by Engineer-in-Charge |
| 63 | M& L for excavation and making proper space to rectify the leakage of cast iron pipe of size200 mm bore spigot and socked end inclduing all required material to rectifiy the leakage complete all as specified and directed by Engineer-in-Charge |
| 64 | M& L for excavation and making proper space to rectify the leakage of galvanize iron iron pipe of size 150 mmbore spigot and socked end inclduing all required material to rectifiy the leakage complete all as specified and directed by Engineer-in-Charge |
| 65 | M& L for excavation and making proper space to rectify the leakage of cast iron pipe of size 100 mm bore spigot and socked end inclduing all required material to rectifiy the leakage complete all as specified and directed by Engineer-in-Charge |
| 66 | M& L for excavation and making proper space to rectify the leakage of galvanize iron pipe of size 80 mm to 100 mm boreinclduing all required material to rectifiy the leakage complete all as specified and directed by Engineer-in-Charge |
| 67 | M& L for excavation and making proper space to rectify the leakage of galvanize iron pipe of size 50 mmboreinclduing all required material to rectifiy the leakage complete all as specified and directed by Engineer-in-Charge |
| 68 | M& L for excavation and making proper space to rectify the leakage of galvanize iron pipe of size 25 mmboreinclduing all required material to rectifiy the leakage complete all as specified and directed by Engineer-in-Charge |
| 69 | M& L for excavation and making proper space to rectify the leakage of galvanize iron pipe of size 20 mmboreinclduing all required material to rectifiy the leakage complete all as specified and directed by Engineer-in-Charge |
| 70 | S&F in replacement PVC flexible pipe heavy duty of size 50 mm diacomplete all as specified and directed by Engineer-in-Charge |
| 71 | S&F in replacement PVC flexible pipe heavy duty of size 80 mm diacomplete all as specified and directed by Engineer-in-Charge |
| 72 | S&F in replacement PVC flexible pipe heavy duty of size 100 mm diacomplete all as specified and directed by Engineer-in-Charge |
| 73 | S&F, in replacement, MS work of required size/shapewith all additional joinery/fabricationitems and colour on all complete as specified and directed by Engineer-in-charge. |
| 74 | Supply only rubber seat suitable for Non return valves 200 mm dia as per existing shape/size as specified and directed by Engir-in-Charge. |
| 75 | Supply only rubber seat suitable for Non return valves 150 mm dia as per existing shape/size as specified and directed by Engir-in-Charge. |
| 76 | Supplyonly gland packing rope size 10 mm complete as specified and directed by Engineer-in-charge. |
| 77 | Supplyonly gland packing rope size 11 mm complete as specified and directed by Engineer-in-charge. |
| 78 | Supplyonly gland packing rope size 12 mm complete as specified and directed by Engineer-in-charge. |
| 79 | M&L for boring of size 80 mm bore under pathways/roads suitable for laying of pipeline of size upto 80mm complete as specified and directed by Engineer-in-charge. |
| 80 | M&L for boring of size 150 mm bore under pathways/roads suitable for laying of pipeline of size from 100mm to 150 mm complete as specified and directed by Engineer-in-charge. |
| 81 | Note :(i) Amount ofcredit for retrieved materials is mentionedin Sch "A" Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
