Dakshinanchal Vidyut Vitran Nigam Limited-DVVNL has published Bill Of Quantities For Construction Of Boundary Wall & Fencing Wall At 33/11 Kv Sub-Station Kuthond, District-Jalaun.. Submission Date for this Tender is 02-05-2024. Wall Construction Tenders in agra Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Excavation in foundation in ordinary soil (Loam Clay or Sand) including lift upto 1.5m and lead upto 30m and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of the foundation work.(CSI No. 4.01) |
| 2 | Clearing jungle including uprooting of rank vegetations, grass, bush,wood, trees and saplings of girth upto 30cm measured at a height of 1.0m above ground level and removal of rubbish upto a distance of 50m outside the periphery of UPPCL area cleared.(CSI No. 4.08) |
| 3 | Earth filling under floors and or Corporation area including cost of earth obtained from within 8 km distance outside Corporation area including all taxes(if any) and its carriage including watering, ramming in 20 cm layers and dressing of earth etc. all complete.(CSI No. 4.10) |
| 4 | Concrete with 4cm gaugestone ballast, coarse sand & cement in proportion of 12:6:1 in foundations & under floors including supply of all materials, labour and tools and plants etc. required for proper completion. (CSI No. 5.02) |
| 5 | Cement concrete with 2cm gauge approved hard stone ballast, coarse sand and cement in proportion of 4:2:1including supply of all materials, labour, side shuttering ifrequired and T&P etc. required for proper completion of work.(CSI No. 5.06) |
| 6 | RCC work with cement, approved coarse sand and2cm gauge graded approved hard stone ballast like granite, quartzite etc from Dalla, Jhansi or other quarries in proportion 1:1.5:3in lintels of doors and windows, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P.(CSI No. 5.23) |
| 7 | RCC work with cement, approved coarse sand and2cm gauge graded approved hard stone ballast like granite quartzite etc from Dalla, Jhansi or other quarries in proportion 1:1.5:3 in raft foundation and footings, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P.(CSI No. 5.27) |
| 8 | RCC work with cement, approved coarse sand and2cm gauge graded approved hard stone ballast like granite, quartzite etc from Dalla, Jhansi or other quarries in proportion 1:1.5:3in RCC T beam-slab and column, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P .(CSI No. 5.29) |
| 9 | First class brick work in 1:6 cement and coarse sand mortar in foundation and plinth including supply of allmaterials, labour & T&P etc. required for proper completion of work.(CSI No. 6.01) |
| 10 | First class brick work in 1:6 cement and coarse sand mortar in Super-structure of one Brick thick including supply of allmaterials, labour & T&P etc. required for proper completion of work (CSI No. 6.01+6.07+6.08) |
| 11 | Brick work in foundation & plinth with old dismantledbricks (supplied by department free of cost) and coarse sand mortar in 1:6 including supply of all other materials, labour, removing mortar & cleaning of old & used bricks,T&P etc complete.(CSI No. 6.18) |
| 12 | Removal of cement mortar from dismantled bricks and stacking in countable position at place as directed by the Engineer in charge, including cost of all labour and T&P required for proper completion of work.(CSI No. 6.22) |
| 13 | Mild Steel or Iron work in heavy sizes such as trusses built upgates, door frames, record racks, roof work, gates etc. wrought torequired form including holes, rivetting or welding where necessary and also fixing in proper position and alignment including cost of all materials supplied by contractor.(CSI No. 9.01) |
| 14 | AS in item 9.01 above but when steel is to be provided by the department.(CSI No. 9.02) |
| 15 | TMT/Tor steel in plain work such as reinforced concrete orreinforced brick work (when not included in an over all rates)wrought to required shape as necessary including bending forproper completion of the work and including supply of steel its wastage, bend, hooks and authorized overlapping shall be measured.(Steel shall be arranged by the contractor) (CSI No. 9.03) |
| 16 | S/F welded wire mesh size 75x25mm and rectangular made out of 10 SWG over M.S. angle frame with M.S. flat welded as required including cost of drilling holes, washer welding etc as required including cost of all material, labour and T&P etc. required for proper completion of work . exept cost of M.S angle and flat. (CSI No. 9.22) |
| 17 | P/F Concertina coilfencing with required dia. 600 mm upto 3 M height of wall between existing angle iron ‘Y’ shaped placed 2.4 M or 3.0 M apart and with 6 horizontal R.B.T. stud tied with G.I. staples and G.I. clips to retain horizontal including necessary bolts or G.I. barbed wire tied to angle iron all complete ( No. of rounds will be 7 to 8 in one Meter length) as per direction of Engineer I/C with reinforced barbed tape (R.B.T.)/ Spring core (2.5mm thick ) wire of high tensile strength of 165 kg/Sqmm with tape ( 0.52 mm thick ) of supreme make or equivalent and weight 43.478 gm/meter (Cost of MS angle, C.C. blocks shall be paid separately).(CSI No. 9.37) |
| 18 | 12 mm thick plaster with cement mortar consisting of one part of cement & six part of coarse sand(1:6), minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work.(CSI No. 11.09) |
| 19 | Add for extra labour and materials for plaster over rough face ofone brick thick wall.(CSI No. 11.12) |
| 20 | Providing (12x15) mm section groove in plasterincluding all material, labour andT&P etc. required for proper completion of the work.(CSI No. 11.16) |
| 21 | Painting or varnishing new iron work in small areas or new woodwork with one coat of ready mixed priming paint and one coat ofapproved superior quality ready mix paint "Luxol" or equivalentbrand or varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should conform to the I.S. 103-1950. (CSI No. 13.01) |
| 22 | As in item 13.01 above but every coat after the first coat. (CSI No. 13.02) |
| 23 | Painting one coat with APEX or equivalent brand weather coat paint on new wall surfaces (well prepared with Birla putty and one coat of primer ICI or equivalent which shall be paid separately) including through washing with water including cost of all materials, labour, T&P required for proper completion of work. (CSI No. 13.22) |
| 24 | Same as in item no 13.22 above but for every coat of additional APEX or equivalent brand weather coat paint . (CSI No. 13.23) |
| 25 | Dismantling brick work or stone work in lime or cement mortar andincluding stacking of materials as directed by theEngineer-in-charge within a distance of 60 metres.(CSI No. 15.01) |
| 26 | Dismantling reinforced cement concrete or reinforced brick work,including stacking of dismantled materials as directed by theEngineer-Incharge within a distance of 60 metres.(CSI No. 15.03) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
