Military Engineer Services-MES has published Tender For Additional/Alternator To Md Accommodation Of Offers, Jcos And Or Under Ge (East) Ferozepur Cantt. Submission Date for this Tender is 21-05-2024. Mobile Generator Tenders in jalandhar Punjab. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| 67aa01a1-3807-4db0-bb7f-4726d8639c20.html | Tender Notice | 0 KB |
| BOQ_728501.xls | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Tender_Addl_Altn_FZR.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Demolition of cement concretein ground floors and paving n.exc 15 cm thickness below or above ground level complete all as specified and directed by Engineer-in-Charge. |
| 2 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and directed by Engineer-in-Charge. |
| 3 | Material and labour for cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protection, 75mm thick, surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 4 | Material and labour for Vitrified ceramic tiles (light shade) 10mm thick (Square/rectangular)area of each tiles n. exc 0.36 sqmin floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer of cement mortar(1:6) for laying floor finishes complete all as specified and directed by Engineer-in-Charge. |
| 5 | Material and labour for Vitrified tile (light shade) 10mm thick, area of tile n.exc.0.36 sqm as in skirting set and jointed in cement slurry over and including 10mm thick screed in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed by Engineer-in-Charge. |
| 6 | Material and labour for non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour over a screed layer of 15 mm thick in CM 1:6 complete all as specified and directed by Engineer-in-Charge. |
| 7 | Material and labour for non skid coloured ceramic tiles of7 to 8 mm thick, area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in skirting/dadoset and jointed in neat cement slurry and pointed in white cementmixed with colour pigment to match andrendering with 10 mm thick in CM 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 8 | Material and labour for non skid coloured ceramic tiles of7 to 8 mm thick, area of each tile exceeding 0.06 sq m but not exceeding 0.11Sq min floors set and jointed in neat cement slurry and pointed in white cementmixed with colour pigment to match the colour over a screed bed of 15 mm thick in CM 1:6 complete all as specified and directed by Engineer-in-Charge. |
| 9 | Material and labour for 350x 250x 7 mm/ 450X 300X 7mm thick glazed coloured(Digital colour) ceramic tiles on vertical surface such as skirting, dados and risers to stepsetc.,including 10mm thick rendering in CM 1:4 on brick or concrete surface and jointed in neat cement slurry and pointed in white/coloured cement to match the shade complete all as specified and directed by Engineer-in-Charge. |
| 10 | Material and labourfor machine cut kota stone slab flooring 20-25 mm thick over 15 mm thick screed bed in cement mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, cutting and granite polish complete all as specified and directed by Engineer-in-Charge. |
| 11 | Material and labour for 18 to 20 mm thick Baroda green marble in single piece including nosing at front and sides in steps, jambs,pillars,window cills,cooking platforms,staircase and like with bull nosing in cm(1:4) incl pointing in white cement(1:2) using marble dust with admixture of pigment to match with marble shade including making grooves for slip guard or steps,edge moulding,making 30 mm dia hole in cooking counter slab for gas pipe including 15mm thick screed bed in cm 1:4 and providing edge moulding to marble incl machine polishing to edge to required finish etc complete all as specified and directed by Engineer-in-Charge. |
| 12 | Material and labour for Kota stone slab 20-25 mm thick in skirting, etc over 15 mm thick screed bed in cement mortar (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, cutting and granite polish, complete all as specified and directed by Engineer-in-Charge. |
| 13 | Taking down chowkhat with shutter exc. 1.50 Sqm and n exe 4 Sqm( without taking off shutter) each complete all as specified and directed by Engineer-in-Charge. |
| 14 | Taking down chowkatwith shutter n.exc 1.50 sqm (without taking off shutters) each complete all as specified and directed by Engineer-in-Charge. |
| 15 | Taking down shutter exc. 1 Sqm but n.exc 2 Sqmeach of any description complete all as specified and directed by Engineer-in-Charge. |
| 16 | Taking down shutter n.exc. 1 Sqm each of any description complete all as specified and directed by Engineer-in-Charge. |
| 17 | Taking down and refixing after minor repairs in same opening shutter exc. 1 Sqm but n.exc 2 Sqmeach complete all as specified and directed by Engineer-in-Charge. |
| 18 | Supply and fixing Powder Coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer in Charge. |
| 19 | Supply and fixing Powder Coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.) hinge type B-21 100mm long (2 Nos.) suitable handle (1 No.) complete all as specified and directed by Engineer in Charge. |
| 20 | Supply and fixing Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and directed by Engineer-in-Charge. |
| 21 | Supply and fixing factory made box type steel window with pintal hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed by Engineer-in-Charge. |
| 22 | S& F Factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed by Engineer-in-Charge. |
| 23 | Supply and fixing steel ventilator with top hung shutter including hinges steel peg stay, complete all as specified and directed by Engineer-in-Charge. |
| 24 | Material and labour framed work such as grills etc with ends of bars shouldered and or riveted or forged into spike; framed guard bars and similar work conforming to Fe 410-0 0r Fe 310-0 complete all as specified and directed by Engineer-in-Charge. |
| 25 | S& F Solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 of MES Schedule Part-II (2020) complete all as specified and directed by Engineer-in-Charge. |
| 26 | Pressed steel frames made of 1.25mm thick MS sheet of profile 105mm x 60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed by Engineer-in-Charge. |
| 27 | All as per Srl item No. 26.00 here-in-before but size 125mm x 60mm with double rebate complete all as specified and directed by Engineer-in-Charge. |
| 28 | Material and labour for cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in filling of steel chowkhats,bed blocks, coping etcincluding necessary form work complete all as specified and directed by Engineer-in-Charge. |
| 29 | Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, Supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2020) complete all as specified and directed by Engineer-in-Charge. |
| 30 | All as per Srl item No. 29.00 here-in-before but wire gauzed i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmlycomplete all as specified and directed by Engineer-in-Charge. |
| 31 | Supply and fixing factory made second class hard wood (Hollock) 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engineer-in-Charge. |
| 32 | Supply and fixing 35mm thick second class hard wood (Hollock) glazed and skelton shutters,open rebated and prepared to receive glass gauze,etc (without sash bars),edges of framingplain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) fitted to chowkat complete all as specified and directed by Engineer-in-Charge. |
| 33 | Material and labour for preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zink primer on steel surfaces complete all as specified and directed by Engineer-in-Charge. |
| 34 | Material and labour for preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge. |
| 35 | Material and labour for preparation of old wooden or wood based surfaces of any description, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. |
| 36 | Material and labour for preparation of old steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge |
| 37 | S& F PTMT tower bolts, 200 mm long and fixed with steel screws complete all as directed by Engineer-in-Charge. |
| 38 | All as per Srl item No. 37.00 here-in-before but 150mm long and fixed with steel screws complete all as specified |
| 39 | S& F PTMT butt hinge, 100mm long,fixed with steel screws complete all as directed by Engineer-in-Charge. |
| 40 | S& F PTMT handle 125mm long fixed with steel screws complete all as directed by Engineer-in-Charge. |
| 41 | All as per Srl item No. 40.00 here-in-before but 150mm long and fixed with steel screws complete all as specified |
| 42 | Supply and fixing 200mm long aluminium, anodisedbarrel tower bolts of extruded section complete all as specified and directed by the Engineer-in-Charge. |
| 43 | Supply and fixing 150mm Extruded aluminium alloy handlecomplete all as specified and directed by the Engineer-in-Charge. |
| 44 | Supply and fixing aluminium tower bolt 150mm long and fixed with steel screws complete all as specified and directed |
| 45 | Supply and fixingAluminium alloy, anodised, sliding door bolt 300mm length,with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engineer-in-Charge. |
| 46 | Supply and fixing 100mm Butt hinges, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed by Engineer-in-Charge. |
| 47 | Supply and fixing aluminium bow handle 150mm long and fixed with steel screws complete all as specified and directed |
| 48 | S& F Hasp and staple of aluminium anodized, safety type, 100mm long, fixed with screws complete all as specified and directed by Engineer-in-Charge. |
| 49 | Supply and fixing mild steel 300 mm, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed by Engineer-in-Charge. |
| 50 | Supply and fixing in repair mild steel 300 mm, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed by Engineer-in-Charge. |
| 51 | Supply and fixing 3mm thick sheet glass, ordinary quality and glazing with oil putty in squares n.exc. 0.50 Sqm each pane complete all as specified and directed by Engineer in Charge. |
| 52 | Supply and fixing 4.0mm thick figured glass pin head type and glazing with oil putty in squares n.exc 0.5 Sqm in each pane fixed to aluminium ventilator complete all as specified and directed |
| 53 | Supply and fixing 4mm thick sheet glass, ordinary quality and glazing with oil putty in squares n.exc. 0.50 Sqm each pane complete with oil putty complete all as specified anddirected by Engineer in Charge. |
| 54 | Supply and fixing 4.8mm thick sheet glass, ordinary quality and glazing with oil putty in squares n.exc. 0.50 Sqm each pane complete with oil putty complete all as specified anddirected by Engineer in Charge. |
| 55 | Supply and fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel staple etc complete all as specified and directed by Engineer-in-Charge.. |
| 56 | Supply and fixing aluminium anodized handle 100mm long fixed to cupboard with steel screws complete all as specified and directed |
| 57 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed by Engineer-in-Charge. |
| 58 | Dismantling of wall and ceiling boards (Fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all specified and directed by Engineer-in-Charge. |
| 59 | Material and labour in repairs for PVC hollow wall paneling 7 to 8mm thick any colour/ design approved by Engineer-in-Charge, inclusive of fixing on to wall including moulding end caps fixed with PVC sleeves and screws as required at site complete all as specified and directed |
| 60 | Supply and fixing gypsum board panel 12mm thick as in ceiling including Tee section accessories of galvanised mild steel, GI suspender all as per manufacturer design confirming to IS 2095 and IS 2542-1981. Weight of board not less than 7 Kg per Sqm complete all as directed by Engineer-in-Charge. Note : Rate quoted shall be deemed to be inclusive of gypsum board, frame work and suspender and other items as required. |
| 61 | Supply and fixing in repairs 18mm thick Celuka plywood of grade 1 quality, one side prelaminated and other side plain white colourto make kitchen cabinet/ drawer/ cub boardshutters complete all as directed by Engineer-in-Charge. Make : Rajshree/ Century/ GREEN PLY/ KIT PLY |
| 62 | Supply and fixing 18mm thick Celuka plywood of grade 1 quality, both side prelaminated plain white colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete all as directed by Engineer-in-Charge. Make : Rajshree/ Century/ GREEN PLY/ KIT PLY |
| 63 | Supply and fixing in repairs 12mm thick Celuka plywood of grade 1 quality, both side plain white colour fixed with screws, solvent cement/ adhesive to make wall mount kitchen, cabinet back and pull out drawer sides complete all as directed by Engineer-in-Charge. Make : Rajshree/ Century/ GREEN PLY/ KIT PLY |
| 64 | Supply and fixingauto closing hinges 35 mm of 0 crank OR8 crank openable at 110 degree for kitchen cabinet shutters complete all as directed by Engineer-in-Charge. |
| 65 | Supply and fixing 30mm continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed by Engineer-in-Charge. |
| 66 | Supply and fixing Ball bearing runners 45 mm Telescopic , full extension load capacity 50 kgs, complete all as directed by Engineer-in-Charge. |
| 67 | Supply and fixingstainless steel handles 100 mm size for kitchen cabinet shutters complete all as directed by Engineer-in-Charge. |
| 68 | Supply and fixing chrome plated stainless steel wire basket (storage basket) pull out type for large utensils, size 795mm x 500mm x 150 mm with necessary fixing clips steel screws etc complete all as specified and directed by Engineer-in-Charge. |
| 69 | Supply and fixing chrome plated stainless steel wire basket (cup and saucer basket) pull out type, size 530mm x 500mm x 100mm with necessary fixing clips etc. complete all as directed by Engineer-in-Charge. |
| 70 | Supply and fixing chrome plated stainless steel wire basket (plate basket) pull out type, size 530mm x 500mm x 100mm with necessary fixing clips steel screws etc complete all as directed by Engineer-in-Charge. |
| 71 | Supply and fixing chrome plated stainless steel wire basket (Thali basket) pull out type, size 530mm x 500mm x 200mm with necessary fixing clips steel screws etc complete all as directed by Engineer-in-Charge. |
| 72 | Supply and fixing chrome plated stainless steel wire basket (cutlery basket) pull out type, size 380mm x 500mm x 100mm with necessary fixing clips etc complete all as directed by Engineer-in-Charge. |
| 73 | Supply and fixing chrome plated stainless steel wire basket (Grain Trolley) pull out type, size 380mm x 500mm x 200mm with necessary sliding frame structure, fixing clips etc complete all as directed by Engineer-in-Charge. |
| 74 | Supply and fixing chrome plated stainless steel wire basket (storage basket) pull out type, size 530mm x 500mm x 100mm with necessary fixing clips etc complete all as directed by Engineer-in-Charge. |
| 75 | Supply and fixing chrome plated stainless steel wire basket (Bottle pull out) pull out type, size 120mm x 500mm x 432mm with necessary sliding frame structure, fixing clips etc. complete all as directed by Engineer-in-Charge. |
| 76 | Supply and fixing granite (of any type) stone slab of20mm thick laid over 15mm thick cement screed bed in CM1:6 machine cut,size and jointed over grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed by Engineer-in-Charge. |
| 77 | Supply and fixing in repairs brass chromium plated bib tap for iron pipe of 15mm borefancy type with crutch or butterfly handle, screwed down high pressure complete all as specified and directed by Engr -in- charge. |
| 78 | Supply and fixing in repairs brass chromium plated long body bib tap for iron pipe of 15mm borefancy type with crutch or butterfly handle, screwed down high pressure complete all as specified anddirected by Engr -in- charge. |
| 79 | Supply and fixing in repair kitchen sink mixer for 15mm bore pipe mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed by Engr -in- charge. |
| 80 | Supply and fixing in repair Brass CP wash hand basin mixer incl copper nipple for connecting with PVC connection 15mm for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed by Engr -in- charge. |
| 81 | Supply and fixing in repairs chromium plated cast copper alloy 2-way angle cock with flange suitable for 15mm bore pipe, complete all as specified and as directed by Engr -in- charge |
| 82 | Supply and fixing in repairs chromium plated cast copper alloy 1-way angle cock with flange suitable for 15mm bore pipe, complete all as specified and directed by Engr -in- charge. |
| 83 | Supply and fixing in repair wall mixer with "L" bend with (Provision for OH shower) 15mm for mixing hot & cold water screwed down for iron pipe and fixedcomplete all as specified and directed by Engineer-in-Charge. |
| 84 | Supply and fixing in repairs CP brass shower rose 150mm size shower with 300mm arm suitable for 15mm bore pipe complete all as specified and directed by Engineer-in-Charge. |
| 85 | Supply and fixing in repairs health faucet with (1.5 Mtr tube & hooks ) complete all as specified and directed by Engineer-in-Charge. |
| 86 | Supply and fixing Cabinet Mirror (400mm x 500mm) complete all as directed by Engineer-in-Charge. |
| 87 | Supply and fixing in repairs looking mirror 600mm x 450mmwith aluminium channel frame, selected quality mounted on 6mm thick commercial ply wood back and fixed with chromium plated brass screws and cup washers complete all as specified and directed by Engineer-in-Charge. |
| 88 | Supply and fixing CP soap dish, any type, fixed to plugs with chromium plated brass screws complete all as directed by Engineer-in-Charge. |
| 89 | Supply and fixing corner glass shelf300 mm radius, 8mm thick , fixed on suitable support of brass chromium plated clips/ screws complete all as directed by Engineer-in-Charge. |
| 90 | Supply and fixing in repairs PVC connection 450mm long with 2 Nos brass check nuts suitable for 15mm bore of pipe with washer complete all as specified and directed by Engineer-in-Charge. |
| 91 | Supply and fixing PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repairs complete all as specified and directed by Engineer-in-Charge. |
| 92 | Supply and fixing vitreous china wash down water closet pan (Pedestal pattern) white incl "P" or "S" trapand making good the disturbed surface to match with the existing complete all as specified and directed by Engineer-in-Charge. |
| 93 | Supply and fixing in repairs vitreous china wash down water closet pan (Pedestal pattern) white incl "P" or "S" trapand making good the disturbed surface to match with the existing complete all as specified and directed by Engineer-in-Charge. |
| 94 | S& F in repair Vitreous china white squatting pan orrissa pattern of size 630mm x 450mm with integral foot rests including necessary cement concrete and 100 mm bore cast iron ‘P’ trap with 550mm to 600mm long neck for connecting WC to branch piece with cement joints, fixed as in repair, complete all as specified and directed by Engineer-in-Charge. |
| 95 | Supply and fixing in repairs, Vitreous china wash hand basin, white flat back size 550mm x 400mm (excluding taps, waste, pipe chain and plug) but including porcelain stopper and a pair of MS bracket etc complete all as specified and directed by Engineer-in-Charge. |
| 96 | Supply and fixing 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engineer-in-Charge. |
| 97 | Supply and fixing PVC waste pipe of standard pattern, not less than 75cm long , 32/40mm dia for steel sink waste or urinalof suitable size complete all as directed by Engineer-in-Charge. |
| 98 | S& F galvanised steel tubing, medium grade, with all fitting and fixed to walls, ceilings or laid in floors 15mm bore including taking up or down old steel tubing complete all as specified and directed by Engineer-in-Charge.charge . |
| 99 | S& F galvanised steel tubing, medium grade, with all fitting and fixed to walls, ceilings or laid in floors 20mm bore including taking up or down old steel tubing complete all as specified and directed by Engineer-in-Charge. |
| 100 | Demolition of reinforced cement concretein ground floors and paving n.exc 15 cm thickness below or above ground level complete all as specified and directed by Engineer-in-Charge. |
| 101 | Material and labour for PCC 1:1½:3 type A-1 (20mm graded aggregate) as in chajjas, landings, balconies, canopies, desk slab and in shelves and the like complete all as specified and directed by Engineer-in-Charge. |
| 102 | Use and waste of formworkto chullah hoods, chajjas, troughs, brassummers, lintels, cantilever, shelves and similar work including edges complete all as specified and directed by Engineer-in-Charge. |
| 103 | Supply and fixing deformed or twisted TMT bar 10 mm dia and over cut to length, bent to shape required, incl cranking bending and binding with MS wire (annealed) not less than 0.9mm or securing with clips complete all as specified and directed by Engineer-in-Charge. |
| 104 | All as per Srl item No. 103.00 here-in-before but 6mm to 8mm dia complete all as specified and directed by Engineer-in-Charge. |
| 105 | Dismantling/ demolition of brick work built in cement mortar of any specification and in any position complete all as specified and directed by Engineer-in-Charge. |
| 106 | Material and labour for brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan.exceeding 6 metre mean radius complete all as specified and directed by Engineer-in-Charge. |
| 107 | All as per Srl item No. 106.00 here-in-before but using old bricks obtained from Srl Item No. 106.00including cleaning and removal of mortar from old bricks. |
| 108 | Material and labour for brick work with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cm 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 109 | Taking downcementplasterany description on brick or stone walls, /RCC walls surfaces etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed by Engineer-in-Charge. |
| 110 | Material and labour for 12mm thick rendering in cement mortar (1:6) on fair faces of brick walls or concrete surfaces, finished evenand smooth with out using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 111 | Material and labour for rendering 15 mm thick in cement mortar (1:4) on any face of brick walls or conrete surfaces, surfaces finishedeven and fair complete all as specified and directed by Engineer-in-Charge. |
| 112 | Material and labour for rendering 5mm thick in cement mortar (1:3) on ceiling, soffits of chajja or similar location any face of brick walls or conrete surfaces, surfaces finished even and smooth without using extra cement,etc complete all as specified and directed by Engineer-in-Charge. |
| 113 | Material and labour for preparation of new plastered surfaces wall and applying two coats of Oil bound distemper over a coat of primer and applying a coat of 1mm thick wall care puttycomplete all as specified and directed by Engineer-in-Charge. |
| 114 | Material and labour for preparation of new plastered surfaces and applying two coats of cement base paint complete all as specified and directed by Engineer-in-Charge. |
| 115 | Material and labour for preparation of new plastered surfaces and applying three coatswhite washing on ceiling surfaces complete all as specified and directed by Engineer-in-Charge. |
| 116 | Material and labour for white washing one coat on ceiling incl preparation of old plastered surfaces complete all as specified and directed by Engineer-in-Charge. |
| 117 | Material and labour for complete removal of oldexisting treatment on walls, cornices etc by brooming down or steel wire brushing scrapping down smoke soot moulds, moss and efflorescence salt and trading oil decorated surface of walls and applying a coat of wall care putty on wall surface and two coats of oil bound distemper (white or tinted) complete all as specified and directed by Engr -in- charge. |
| 118 | Material and labour for complete removal of oldexisting surfaceand applying two coats cement base paint complete all as specified and directed by Engineer-in-Charge. |
| 119 | Surface dressing n.exc. 15cm deep in soft/loose soil complete all as specified and directed by Engineer-in-Charge. |
| 120 | Material and labour for 100mm thick cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in subbase complete all as specified and directed by Engineer-in-Charge. |
| 121 | Material and labour for precast machine pressed cement concrete interlocking paver blocks of any shape and size confirming to IS 15658-2006 of 60 mm thick M-35 grade, with grey cement and pigment laid dry over a layer of 25 mm thick sand cushioning complete all as specified and directed by Engineer-in-Charge. |
| 122 | Material and labour for PCC 1:2:4 type B-1 using 20 mm gaded stone aggregate as in roof kerb, roof padding, mud stone, rounded or chemfered on edges and similar works complete all as specified and directed by Engineer-in-Charge. |
| 123 | Dismantling of brick tiles single layer jointed & pointed in cement mortar including removal of grass vegitation including roots near out let of RWP and OHT staging area or specifically ordered by Engineer-in-Charge in writing complete all as directed by Engineer-in-Charge. |
| 124 | Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) incluidng cleaning the surface with wire brushing complete all as specified and directed by Engineer-in-Charge. |
| 125 | Material and labour for 10mm thick screed bed or bedding layer of mortar in CM (1:4) with water proofing compound @3% by weight of cement or as per manufacturer instructions to have a smooth surface for laying of water proofing membrane complete all as specified and directed by Engineer-in-Charge. Note: WPC shall be measured and paid separately |
| 126 | Supply only integral water proofing compound ISI marked. |
| 127 | Material and labour for applying a layer of blown gradeof industrial bitumen 85/25 @ 1.20 Kilogram per square metre including preparation of roof surfaces complete all as specified and directed by Engineer-in-Charge. |
| 128 | Material and labour for applying evenly a tack coat of industrial bitumen 85/25 @ 1.6 Kg/ Sqm including preparation of surfaces complete all as specified and directed |
| 129 | Material and labour for APP based polymeric membrane minimumweighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) Laidon primed surface by torch application including bitumen primercomplete all as specified and directed by Engineer-in-Charge. |
| 130 | Material and labour for 80mm thick average consolidated thicknessmud phuska on flat roof ncluding 25mm thick mud plaster and 3mm thick leeping plaster complete all as specified and directed by Engineer-in-Charge. |
| 131 | Material and labour for 20mm thick screed bed or bedding layer of mortar in CM (1:4) receive brick tiles complete all as specified and directed by Engineer-in-Charge. |
| 132 | Supply and fixing 40mm thick brick tiles laid on mud mortar and joints grouted flus in cement mortar (1:3) mixed with 5% of crude oil by wt of cement in mud phuska complete all as specified and directed by Engineer-in-Charge. |
| 133 | All as per Srl item No 132.00 here-in-before but except tiles |
| 134 | Dismantling wrought iron or mild steel work of any description complete all as specified and directed by Engineer-in-Charge. |
| 135 | Supply and fixing for rolled sections Fe 410 -W (Gde- E- 250) quality- as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed by Engineer-in-Charge. |
| 136 | Demolition of cement concrete in sunken portion any description and in any position not otherwise specifically provided complete all as specified and directed by Engineer-in-Charge. |
| 137 | Material and labour for rendering 15mm thick CM (1:3) with WPC on walls as well as on sunken floor portion finished even and smooth using extra cement complete all as specified and directed by Engineer-in-Charge. Note:- WPC shall be measured and paid separately. |
| 138 | Material and labour for PCC for (1:5:10) type E-2 (using 40mm graded aggrigate) as in filling under sunken portion complete all as specified and directed by Engineer-in-Charge. |
| 139 | Material and labour for 25mm tick PCC(1:2:4) type B-1 using 20mm graded aggrigate as in floor finished even and rough complete all as specified and directed by Engineer-in-Charge. |
| 140 | Supply and fixing 1.0mm thick stainless steel plate rack of size 750mm x 600mm x 250mm (Grade of steel shall be 304 AISI) including fixing to wall with 4 Nos 50mm steel screws & PVC rawl plug complete all as directed by Engineer-in-Charge quality & make as approved by GE. |
| 141 | All as per Srl item No. 140.00 here-in-before but of size 900mm x 750mm x 250mm |
| 142 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 143 | Supply and fixing 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches complete all as specified and directed by Engineer-in-Charge. |
| 144 | Supply and fixing 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches complete all as specified and directed by Engineer-in-Charge. |
| 145 | Supply and fixing 75mm dia PVC (SWR) bends any radius complete all as specified and directed by Engineer-in-Charge. |
| 146 | Supply and fixing 110 mm dia PVC (SWR) bends any radius complete all as specified and directed by Engineer-in-Charge. |
| 147 | Supply and fixing 110 mm PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified and directed by Engineer-in-Charge. |
| 148 | Supply and fixing 75mm dia PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed by Engineer-in-Charge. |
| 149 | Supply and fixing 110 mm dia PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed by Engineer-in-Charge. |
| 150 | Supply and fixing 75 mm dia PVC (SWR) bends any radius with access door complete all as specified and directed by Engineer-in-Charge. |
| 151 | Supply and fixing 110 mm dia PVC (SWR) bends any radius with access door complete all as specified and directed by Engineer-in-Charge. |
| 152 | Supply and fixing 75 mm dia PVC (SWR) vent cowl complete all as specified and directed by Engineer-in-Charge. |
| 153 | Supply and fixing 110 mm dia PVC (SWR) vent cowl complete all as specified and directed by Engineer-in-Charge. |
| 154 | Supply and fixing PVC (SWR) multi floor trap with grating including jointing with solvent cement 75 mm dia outlet complete all as specified and directed by Engineer-in-Charge. |
| 155 | Supply and fixing in repair ball valves of 20 mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge. |
| 156 | Supply and fixing in repair stop valves chromium plated fancy type of 15mm bore complete all as specified and directed by Engineer-in-Charge. |
| 157 | Supply and fixing in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed 20 mm dia complete all as specified and directed by Engineer-in-Charge. |
| 158 | Supply and fixing in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed 15 mm dia complete all as specified and directed by Engineer-in-Charge. |
| 159 | Supply and fixing in replacement sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer-in-Charge. |
| 160 | Supply and fixing sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer-in-Charge. |
| 161 | Material and labour forwhite color rotational molded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I capacity of the tank 500 ltrs including GI tank nipple of size 20 mm dia including dismantling of old water tank complete all as specified and directed by Engineer-in-Charge. |
| 162 | Material and labour fordisconnecting existing 500 ltr capacity tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position incl nesesary fittings complete all as specified and directed by Engineer-in-Charge. |
| 163 | Supply and fixing mild steel 20mm dia curtain rod powder coated with fixing side brackets, end brackets/ cup and rings @ 10 Nos per running metre and fixed with PVC rawl plugs & steel screws as in repairs complete all as specified and directed by Engineer-in-Charge. |
| 164 | Material and labour for framed work such as grills gratings etc with ends of bars shouldered and or riveted or forged into spikes framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framed work of water tanks and similar work coforming to Fe 290 Gde E-165 complete including taking down complete all as specified and directed by Engineer-in-Charge. |
| 165 | Supply and fixing in repairs fancy type chromium plated stop valves with long shank and cup (concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed for bore of size 15mm complete all as specified and directed by Engineer-in-Charge. |
| 166 | Supply and fixing in repairs 125mm chromium plated shower rose with CP arm with or without swivel joint complete all as specified and directed. |
| 167 | Material and labour for cement concrete (1:3:6) type C-1 using 20 mm graded stone aggregate as in fillings and mass concrete, filling backs of chowkats etc., complete all as specified and directed by Engineer-in-Charge. |
| 168 | Material and labour for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed by Engineer-in-Charge. |
| 169 | Material and labour for Cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in floor topping, 40mm thick, surfaces finished even and fair without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 170 | Material and labour for Granite(of any type) tiles18- 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 15mm thick rendering in CM 1:4complete including making hole for gas pipe including at corners and polishing complete all as specified and directed by Engineer-in-Charge. |
| 171 | Material and labour for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed by Engineer-in-Charge. |
| 172 | Material and labour for two coat of aluminium paint over APP membrane complete all as directed by Engineer-in-Charge. |
| 173 | Material and labour for cement concrete tiles 25cm x 25cm x 22mm thick, machine pressed; set and jointed in neat cement slurry over 15 mm thick screed in cement mortar (1:6) and pointed in neat cement mixed with pigment to match the shade of tiles complete all as specified and directed by Engineer-in-Charge. |
| 174 | Material and labour for preparation of new plastered surfaces of ceiling & applying three coats of white wash complete all as specified and directed by Engineer-in-Charge. |
| 175 | Material and labour for 2mm thick wall care putty on wall including cleaning and preparation of surfaces complete all as directed by Engineer-in-Charge. |
| 176 | Material and labour for two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer"s specification on new work complete all as specified and directed by Engineer-in-Charge. |
| 177 | Material and labour for one coat of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer"s specification on old surface of wall incl complete removal of existing surface complete all as specified and directed by Engineer-in-Charge. |
| 178 | Material and labour for preparation of newly plastered surfaces of Wall & applying three coats of white wash complete all as specified and directed by Engineer-in-Charge. |
| 179 | Material and labour for complete removal of existing treatment including preparation of surfaces of walls & applying three coats of white wash complete all as specified and directed by Engineer-in-Charge. |
| 180 | Material and labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces complete all as specified and directed by Engineer-in-Charge. |
| 181 | Supply and fixing Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer-in-Charge. |
| 182 | Supply and fixing anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 100mm long (2 Nos.) suitable handle (1 No.) complete all as specified and directed by Engineer-in-Charge. Note:- (i) Aluminium chowkhat /frame, glass,wiremesh and aluminium grill shall be measured and paid separately. |
| 183 | Supply and fixing partition of required size consisting of panel of 18mm thick Celuka PVC plywood complete all as directed by Engineer-in-Charge. Make : Rajshree/ Century/ GREEN PLY/ KIT PLY |
| 184 | Dismantling timberin fillets, rails, posts, rafters, purlins, etc; under 40 sq. cm in each section, fixed in any position as in framed work complete all as specified and directed by Engineer-in-Charge. |
| 185 | Material and labour for plain fillets of 2nd class hard wood (hollock), square or rectangular or triangular in section, clean sawn, secured with nails and brads area n.exc 3 Sq cmcomplete all as specified and directed by Engineer-in-Charge. |
| 186 | Mild steel framed work of Fe-410-0 or Fe-310-0 (Fe-290 Gde-E-165) as in doors or gate of angle or other section with gusset plates,rails, braces etc and fixing complete all as specified and directed by Engineer-in-Charge. |
| 187 | Supply and fixing 18mm thick Prelaminated particle board, interior grade prelaminated both side with decorative choice lamination, fixed with screws as in shutters & shelves including 6mm thick teak wood leaping on three sides and 20mm thick on hanging side complete all as directed by Engineer-in-Charge. |
| 188 | Material and labour for one coat of synthetic enamel paint including preparation of old painted steel surfaces of any description over 10 cm.width or girth complete all as specified and directed by Engineer-in-Charge. |
| 189 | Supply and fixing150 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and directed by Engineer-in-Charge. |
| 190 | Material and labour for cutting chases, pinning in. making good to facings where required for brick wall and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed by Engineer-in-Charge. |
| 191 | Supply and fixing in repair sheet glassshelf assembly consisting of 5.5 mm thick sheet galss shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as directed by Engineer-in-Charge. |
| 192 | Supply and fixing vitreous china wash basin, white/ coloured, flat back, size 450x300mm including PTMT waste fittings, 32mm bore size and angle iron brackets & CP Pillar tap of required size and length etc. and making good disturbed surfaces to match with the existing complete all as specified and directed by Engineer-in-Charge. |
| 193 | Supply and fixing low density polyethylene (LDPE) pipes 32mm bore of pressure rating 6 kgf/sq. cm complete all as directed by Engineer-in-Charge. |
| 194 | Dismantling upto 100mm of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out from wall/trenches,complete all as directed by Engineer-in-Charge. |
| 195 | Material and labour for reinforced cement concrete nominal mix (1:2:4),type B1 using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engineer-in-Charge. |
| 196 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping)rough surfaces of concrete complete all as specified and directed by Engineer-in-Charge. |
| 197 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n.exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n.exc 20cm widerough surfaces of concrete complete all as specified and directed by Engineer-in-Charge. |
| 198 | Providing and laying factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed by Engineer-in-Charge. |
| 199 | Material and labour for applying bond coat of epoxy bonding agent & cement mortor in 1:1 ratio for bonding old and new concrete on damaged surfaces applying polymer modified mortar in CM 1:3 including mixing of polymer latex additives upto 60mm thickness (Chajjas fins, border etc) :- (i)Qty of ploymer to be used 15% by weight of the cement. (ii)Use of electrical mixer to get the homogeneous dough on bond coat surfaces. (iii)To achieve required thickness repear this step after 24 hrs as required. (iv) Keep the surfaces moist using water forg for 5 to 7 days etc complete all as specified and as directed. (v)Rate shall be inclusive of all necessary scaffolding for building height up to 24 meters complete all as directed by Engineer-in-Charge. Make : - Epoxy bonding agent shall be of Krishna, Dr Fixit, MC Bauchemie and M/s Cemistik, Sika or Equivalent as approved by GE |
| 200 | Material and labour for shotcreting average thickness 50 mm in RCC columns, beams and slab etc. with cement concrete M-25 design mix having minimum cement content of 350 Kg per Cum. Concrete having the specified minimun characterstic compressive strength (with ordinary portland cement, coarse sand and graded stone aggregates of 6 mm maximum size in proportion as per design criteria) incl the cost of centering and shuttering at edges and corner etc as directed by Engineer-in-Charge incl chipping of unsound/week concrete mateial 50 mm average thickness from slabs, beams/columns etc with mannual chiesels or standerd power driven percussion type machine incl tapering of all edges, make square shoulder of cavities incl cleaning the exposed concrete surface and reinforcement with wire brushes and throughly washing with water and allowing it to dry etc incl removel of rust by applying approved rust remover chemical and the coating with Dr Fixit Epoxy zinc primer @ 6 Sqm per Litre at DFT of 100 micron, applying the SBR Latex based bonding agent on each layer of the shootcreting work of Dr Fixit Pidicrete URP on the entire surface complete all as directed including 5 mm thick cement plaster in CM (1:3) finished even and smooth without using extra cement including removing rubbish material from building and thrown in low lying lying area at any distance upto 500 metres from the site complete as directed by Engineer-in-Charge. Make of chemical : Sika/Fosroc/Pidilite or Techno commercial or equivalent make approved by GE in writing from E-in-C"s approved list. Notes : (i) Complete treatment to be executed by approved applicator (Applicator to be approved by GE). (ii) hard drawn steel wire fabricto be paid seperately. |
| 201 | Supply and fixing hard drawn steel wire fabric not exc 4 kg/sqm cut to lengths, wire mesh to be fixed and firmly anchored to the concrete surface by means of "L" shaped mild steel shear key welded with existing reinforcement including cost of material, labour, tools and plants incl welding/L-clip/tying with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed by Engineer-in-Charge. |
| 202 | Material and labour for cleaning the blockage of bathroom/kitchen by cleaning the nanhi traps / gully traps of all the mud / sludge and getting out washing throughly traps, CI waste pipe by opening the cleaning eyes and depositing the sludge in a pit of suitable size at a distance not exceeding 100m from the gully trap and covering the same with the soil obtained from excavation of pit including excavation and earth work complete all as specified and directed by Engineer-in-Charge. |
| 203 | Supply and fixing in repair towel rail, 20mm dia brass chromium plated, 600mm long with fancy type brass chromium plated bracket on both sides and fixed to wall with steel screws and wooden/ rawl plugs complete all as directed by Engineer-in-Charge |
| 204 | Supply and fixing 1.0mm thick PVC sheet edging (width 18mm) fixing by using adhesive solvent etc. complete all as directed by Engineer-in-Charge |
| 205 | Supply and fixing in repair bib tap chromium plated fancy type 15mm bore complete all as directed by Engineer-in-Charge |
| 206 | Taking down carefully existing point wiring of any type (i.e on wooden batten, surface conduit, casing capping or concealed conduit except existingconduit) complete for light, fan, socket or power point with fittingSupply and fixingixtures such as ceiling rose, electric fittings, holders, switches, sockets wooden batten, conduit etc including accessories such as wooden gutties/ rawal plug, screw etc including removing materials from site for taking credit of unserviceable items and re-fixing the serviceable items as per schedule and making good disturbed surface of walls, floors etc, complete all as specified and directed by Engineer in Charge. Notes : (i) The existing conduit of concealed wiring will not be removed from site and same will be reused for point wiring under respective item hereunder. (ii) The qty of serviceable/ unserviceable items will be ascertained by the BOO detailed by GE and serviceable items (such as LED fittings/LED tube and bulb /ceiling/ Exhaust Fans and geysers) will be refixed under respective item hereunder and unserviceable items such as switches, sockets, ceiling rose, holders, brackets, bulkhead fittings, LED fittings, MCB DBs, sunken boxes andfixtures etc. shall be issued to contractor under schedule of credit all as specified and directed. |
| 207 | Material and labour for point wiring with 1.5 sqmm, PVC insulated but unsheathed, stranded copper conductor single core FRLS cable, IS-694 marked, drawn through existing metallic/ rigid PVC concealed conduit including replacement of pressed steel terminalmounting boxfor mounting fittinglikeP/T switches, sockets, and provinding covered with 3 mm thick plastic laminated bakelite sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated( green colour)1.50 sqmm sizecopper conductor cable as a earth wire and connected to common earth dolly for one light/one fan/one bell point controlled by one, one way switch complete all as specified and directed, (For JCO/ORs Md Accn against the existing points) |
| 208 | All as per Srl item No. 207.00 here-in-before but one light point controlled by two Nos of two way switch. |
| 209 | All as per Srl item No. 207.00 here-in-before but one socket outet point 5 Amps on the same board. |
| 210 | All as per Srl item No. 207.00 here-in-before but one socket outlet 5 pin 5 Amp controlled by one, one way switch on independentboard. |
| 211 | All as per Srl item No. 207.00 here-in-before but wiring with using cable 2.50 sqmm size copper wire (FRLS) and earth wire of PVC insulated (Green colour) 2.50 Sqmm sizecopperwire for one 6 pin socket outlet, 16 Amperes on independent board. |
| 212 | Material and labour for point wiring with 1.5 sqmm, PVC insulated but unsheathed, stranded copper conductor single core FRLS cable, IS-694 marked, drawn through existing metallic/ rigid PVC concealed conduit including replacement of pressed steel terminalmounting box , for mounting fittinglike modular switches, sockets, andfixed with brass screws and cup washers including one continuous run of PVC insulated 1.50 sqmm sizecopper conductor cable green in colour as a earth wire and connected to common earth dolly for one light/one fan/one bell point controlled by one, one way switch complete all as specified and directed (For Officer Md Accn against existing points). Note : Cost of Metal boxes and modular accessories like cover plates will be paid seprately in respect items) |
| 213 | All as per Srl item No. 212.00 here-in-before but one light point controlled by two Nos of two way switch. |
| 214 | All as per Srl item No. 212.00 here-in-before but one socket outet point 5 amps on the same board. |
| 215 | All as per Srl item No. 212.00 here-in-before but one socket outlet 5 pin 5 Amp controlled by one, one way switch on independentboard. |
| 216 | All as per Srl item No. 212.00 here-in-before but wiring with using cable 2.50 sqmm size copper wire (FRLS) and earth wire of PVC insulated (Green colour) 2.50 Sqmm sizecopperwire for one 6 pin socket outlet, 16 Amperes on independent board. |
| 217 | Supply and fixing Point wiring complete with 1.5 Sq mm (nominal area) FRLS PVC insulated unsheathed and stranded copper conductor cable ISI markeddrawn into and including medium grade PVC conduit concealed (not less than 20 mm dia) all necessary fittings and accessories fixed concealed (including chase cutting in brick/stone masonery wall for fixing conduit and plastering the external surfaces and matching the same with existing suface)andpressed steel terminal boxes ofthicknes not less than 1.2 mm for mounting fittinglike P/T switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated bakelite sheet cover fixed with brass screws and cup washers including one continuous run of FRLS PVC insulated green in colour 1.50 sqmm sizecopper conductor cable as earth wire and connected to common earth dolly for one light/one fan/one bell point controlled by one, one way switch complete all as specified and directed by Engineer in Charge. (For JCO/ORs Md Accn against new SOA 2022 and existing unsv and dismental conduit pionts). |
| 218 | All as per Srl item No. 217.00 here-in-before but one light point controlled by two Nos of two way switch. |
| 219 | All as per Srl item No. 217.00 here-in-before but one socket outlet 5 pin 5 Amp controlled by one, one way switch on same board. |
| 220 | All as per Srl item No. 217.00 here-in-before but one socket outlet 5 pin 5 Amp controlled by one, one way switch on independent board. |
| 221 | All as per Srl item No. 217.00 here-in-before but wiring with using cable 2.50 sqmm size copper wire FRLS and earth wire of PVC insulated (Green colour) 2.50 Sqmm sizecopperwire for one 6 pin socket outlet, 16 Amperes on independent board complete all as specified and directed by Engineer-in-Charge. |
| 222 | Material and labour for point wiring with 1.5 sqmm, PVC insulated but unsheathed, stranded copper conductor single core FRLS cable, IS-694 marked, drawn through and including non metallic rigid PVC concealed conduit medium grade 20mm dia (minimum) or higher size as specified and cutting chasing on wall complete with all PVC conduit accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc/ fittings ISI marked for modular fittings andbrass screws and cup washers including 1.5 sqmm stranded copper conductor PVC insulated FRLS cable green in colour as continuous earth conductor connected to common earth and earth dolly with all accessories for one light/one fan/one bell point controlled by one, one way switch complete all as specified and directed by Engineer-in-Charge (For Officer Md Accn against new SOA 2022 and existing unsv and dismental conduit pionts). Note : Cost of Metal boxes and modular accessories like cover plates will be paid seprately in respect items. |
| 223 | All as per Srl item No. 222.00 here-in-before but one light point controlled by two Nos of two way switch. |
| 224 | All as per Srl item No. 222.00 here-in-before but one socket outet point 5 amps on the same board. |
| 225 | All as per Srl item No. 222.00 here-in-before but one socket outet point 5 amps on the independent board. |
| 226 | All as per Srl item No. 222.00 here-in-before but with 2.5 sq mm wire and earth wire (green colour) of 2.5 sq mm for 3 Pin 15 Amp modular type socket outlet complete all as specified and directed by Engineer-in-Charge. |
| 227 | Supply and fixing modular metal flush box 1/2 module complete all as specified and directed by Engineer in Charge. |
| 228 | Supply and fixing modular metal flush box 3 module complete all as specified and directed by Engineer in Charge. |
| 229 | Supply and fixing modular metal flush box 4 module complete all as specified and directed by Engineer in Charge. |
| 230 | Supply and fixing modular metal flush box 6 module complete all as specified and directed by Engineer in Charge. |
| 231 | Supply and fixing modular metal flush box 8 module complete all as specified and directed by Engineer in Charge. |
| 232 | Supply and fixing modular metal flush box 12 module complete all as specified and directed by Engineer in Charge. |
| 233 | Supply and fixing modular white cover plate with frame, 1 module complete all as specified and directed by Engineer in Charge. |
| 234 | Supply and fixing modular white cover plate with frame, 2 module complete all as specified and directed by Engineer in Charge. |
| 235 | Supply and fixing modular white cover plate with frame, 3 module complete all as specified and directed by Engineer in Charge. |
| 236 | Supply and fixing modular white cover plate with frame, 4 module complete all as specified and directed by Engineer in Charge. |
| 237 | Supply and fixing modular white cover plate with frame, 6 module complete all as specified and directed by Engineer in Charge. |
| 238 | Supply and fixing modular white cover plate with frame, 8 module complete all as specified and directed by Engineer in Charge. |
| 239 | Supply and fixing modular white cover plate with frame,12 module complete all as specified and directed by Engineer in Charge. |
| 240 | Supply and fixing modular Dummy plate complete all as specified and directed by Engineer in Charge. |
| 241 | Supply and fixing Modular switch 6 Amp 1 way 1 module size complete all as specified and as directed by Engineer-in-Charge. |
| 242 | Supply and fixing of Modular switch 6 Amp 2 way 1 module size complete all as specified and as directed by Engineer-in-Charge. |
| 243 | Supply and fixing Modular switch 16 Amp 1 way with indicator 1 module size complete all as specified and as directed by Engineer-in-Charge. |
| 244 | Supply and fixing Modular socket shuttered 6 Amp 2/3 pin combined2 module size complete all as specified and as directed by Engineer-in-Charge. |
| 245 | Supply and fixing Modular socket 16Amp multipurpose type 2 module sizecomplete all as specified and as directed by Engineer-in-Charge. |
| 246 | Supply and fixing Modular Fan regulator step type 120 watts 2 Module size complete all as specified and as directed by Engineer-in-Charge. |
| 247 | Supply and fixing Modular bell switch 6 Amp1 module size complete all as specified and as directed by Engineer-in-Charge. |
| 248 | Supply and fixing of switch piano flush button single pole one-way 5 Ampere complete all as specified and directed by Engineer in Charge. |
| 249 | Supply and fixing of switch piano flush button single pole Two-way 6 Ampere complete all as specified and directed by Engineer in Charge. |
| 250 | Supply and fixing of socket outlet 5 Ampere, 2 and 3 pins (TOTAL 05 PINS), flush type 250 volts AC complete all as specified and directed by Engineer in Charge. |
| 251 | Supply and fixing of switch piano flush button single pole one-way 15 Ampere complete all as specified and directed by Engineer in Charge. |
| 252 | Supply and fixing of socket outlet two-in-one, 3 pin each suitable for 5 and 15 Amperes flush type, 250 volts AC complete all as specified and directed by Engineer in Charge. |
| 253 | Supply and fixing fan regulator electronic step type socket size and making all necessary connections complete all as specified and directed by Engineer in Charge. |
| 254 | Supply and fixing Ceiling rose, surfacebakelite 3 terminal, 240 volts, 5 Amps with back plate of 3 mm thickbakelite, laminated hylem sheet of appropriate size,complete ,all as specified. |
| 255 | Supply and fixing lamp holder, PVC / polycarbonate type insulated body with back plate suitable for batten / angle fittings complete all as specified and directed by Engineer in Charge. |
| 256 | Supply and fixing decorative wall light fixture ofpolycarbonate type insulated body with back plate suitable for Led lamp B22 baseincluding led lamp 9 watt complete all as specified and directed by Engineer in Charge. |
| 257 | Supply and fixing of single phase call bell ‘DING DONG’, AC 230 volts single pole fixed over and including pressed steel sunk box of size 175 X 100 mm duly covered with 3 mm thick bakelite sheet complete all as specified and directed by Engineer in Charge. |
| 258 | Supply and fixing bell push, flush type, single pole 5 amps complete all as specified and directed by Engineer in Charge. |
| 259 | Supply and fixing MCB single pole, 240 volts, 6 to 32 Ampere, rupturing capacity 10 KA, ‘B’ curve type complete all as specified and directed by Engineer in Charge. |
| 260 | Supply and fixing MCB single pole, 240 volts, 6 to 32 Ampere, rupturing capacity 10 KA, ‘C’ curve type complete all as specified and directed by Engineer in Charge.Make & Cat Part- DHMZCSPF006-32 of Havells or eqvt inANCHOR,ABB, Standard and CG. |
| 261 | Supply and fixing MCB SPN, 240 volts, 40 to 63 Ampere, rupturing capacity 10 KA, ‘B’ curve type complete all as specified and directed by Engineer in Charge.Make & Cat Part- DHMZCSNF040 of Havells or eqvt in ANCHOR,ABB, Standard and CG. |
| 262 | Supply and fixing sheet metal enclosure for DB’s (Double door type) when MCB’s to be used, single pole and neutral, 12ways with 200 ampere rated bus bar, 240 volts fixed sunk / flush to the wallwith IP-43 and IK-09 protection complete all as specified and directed by Engineer in Charge. Make & Cat Part- DHDESHCDOW12 of Havells or eqvt in ANCHOR,ABB, Standard and CG. |
| 263 | Supply and fixing Factory made sheet metal enclosures double door type made out of CRCA 1.2 mm thick M.S. sheet, powder coated, partly embedded in wall, IP-43 protection, TPN DB with 200 Amps rated bus bar, 4 way, 415 volts,dust and vermin proof, suitable for incorporation of MCBs, factory made, including MCB4 pole 63 Amps, 50 Hz, 415 Volts with rupturing capacity 16 KA and making good distrubbed surfaces with matching colour, complete all as specified. Make & Cat Part (for TPN DB) - DHDETHCDOW04 ,of Havells or eqvt in ANCHOR,ABB, Standard and CG. Make & Cat Part (for TPN MCB) - DHMZCTNF063 ,of Havells or eqvt in ANCHOR,ABB, Standard and CG. |
| 264 | Material and labour for sub main wiring with 1100 volt grade two single core FRLS Wire PVC insulated and unsheathed cable with stranded copper conductor 10 sqmm drawn into and including electrical grade PVC conduit not less than 25 mm dia with IS 9537 (Part-III) 1983 mark, or relevant ISI mark with all accessories fixed concealed including chase cutting in brick/ stone masonry for fixing conduit and making good the disturb surfaces of wall as per existing including 10 sqmm multi - stranded copper conductor as earth wire in green colour complete all as specified and directed by Engineer in Charge. Including taking down old unserviceable sub main wiring. Note : Two runs of 10 sqmm PVC FRLS multi stranded copper cable wire and One run of 10 sqmm PVC FRLS multi stranded copper cable earth wire and One run (01 meter) PVC conduit of suitable size ISI mark will be measured and one unit length. |
| 265 | Material and labour for sub main wiring with 1100 volt grade two single core FRLS Wire PVC insulated and unsheathed cable with stranded copper conductor 6 sqmm drawn into and including electrical grade PVC conduit not less than 25 mm dia with IS 9537 (Part-III) 1983 mark, or relevant ISI mark with all accessories fixed concealed including chase cutting in brick/ stone masonry for fixing conduit and making good the disturb surfaces of wall as per existing including 6 sqmm multi - stranded copper conductor as earth wire in green colour complete all as specified and directed by Engineer in Charge. Including taking down old unserviceable sub main wiring . NOTE Two runs of 6 sqmm PVC FRLS multi stranded copper cable wire and One run of 6 sqmm PVC FRLS multi stranded copper cable earth wire and One runPVC conduit of suitable size ISI mark will be measured and one unit length. |
| 266 | Material and labour for sub main wiring with 1100 volt grade two single core FRLS Wire PVC insulated and unsheathed cable with stranded copper conductor 4 sqmm drawn into and including electrical grade PVC conduit not less than 25 mm dia with IS 9537 (Part-III) 1983 mark, or relevant ISI mark with all accessories fixed concealed including chase cutting in brick/ stone masonry for fixing conduit and making good the disturb surfaces of wall as per existing including 4 sqmm multi - stranded copper conductor as earth wire in green colour complete all as specified and directed by Engineer in Charge. Including taking down old unserviceable sub main wiring. NOTE Two runs of 4 sqmm PVC FRLS multi stranded copper cable wire and One run of 4 sqmm PVC FRLS multi stranded copper cable earth wire and One runPVC conduit of suitable size ISI mark will be measured and one unit length. |
| 267 | Supply and fixing in replacement of LED tube light fitting for all purpose surface and wall mounted with single side connection polycarbonateLEDbatten with polycarbonate housing and integrated electronic driver of capacity 20 W ,four feetand connection with PVC insulalted twin core 23/0.0076 twisted copper cable from ceiling rose to tube light fitting complete all as specified and directed by Engineer in Charge.Make: Havells cat part No. LUMILINEEOBS20WLED830SPCWH or equivalent make of Bajaj/Crompton/Philips. |
| 268 | Fixing only servicable LED Tubelight fittng 18/20/22 watts, as per Srl item No. 206.00 after B/R repairs and making electrical connection complete all as specified and directed by Engineer in Charge. |
| 269 | Supply and fixingwall /ceiling mounting LED 9/10 Watt tube light fitting with polycarbonate housing and integrated electronic driver complete withall acessories 1x9 Watt LED,with CCT of 6000k suitable for domestic application, 240 Volts, 50 Hz,and internally pre-wired with 1.5 sqmm twin twisted flexible cable copper conductor and connection complete all as specified and directed. Make: Havells cat part No. LUMILINEBS9WLED865SPCWH or equivelent make of bajaj/Crompton/Philips. |
| 270 | Supply and fixing energy saving new generation 10 watt LED built up, 6000Kbulk head luminaire with opal diffuser light fitting complete with all acessories and connection complete. Make : Havells cat part No. RUGBYGENXFTS10WLED865SSYMBOPC or equivalent make of Bajaj/ Crompton/ Philips. |
| 271 | Supply and fixing in replacement of security light fitting LED 35 Watt withdusk and down sensor aluminum pressure dia cast housing with touched glass cover IP-66 protectionIncludingsuitable size GI Bracketand accessories complete mounted including connection with 3 core PVC insulated overall sheathed flexible cable with multistranded copper conductor of size not less than 1.5 sq mm from celing rose to fitting terminal including taking down old CFL security light fittingall as specified and as directed.Make: Havells cat part No. ENDURASUNDOWNSL35WLED 765PASYBOPC or equivelent make of bajaj/Crompton/Philips. |
| 272 | Supply and fixing fresh air fan 250mm size including making of hole/openingin wallcomplete all as specified and directed by Engineer-in-Charge. Make: Havells cat part No. FHVVEDXWHAT10 or equivelent make of bajaj/Crompton/Philips. |
| 273 | Fixing onlyof geyser (Electric Water heater storage type) of capacity 25 Lts, obtained from Srl item No. 206.00 (keep in safe custody), after B/R repairs. Note : Cost of minor petty items if required such as nut bolt/PVC pipe is included in quoted rate. |
| 274 | Supply and fixing electric water heater,storage type steel body with SS 304inner tank and heating element upto2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. |
| 275 | Supply and fixing ceiling fans 1200 mm Sweep, 26W, 350 RPM, 220 Cum/ min Air delivery, BLDC techology, five star rated complete eith fan blade , down rods and other connectedaccessories, without remote and compatible with electronic fan regulator including 3 core insulated copper wire multistranded complete all as specified & directed by Engineer-in-Charge. Make :- Modal Efficiencia Neo FHCNF5SWHT 48 of Havells or eqvt in Philips, Bajaj and CG. |
| 276 | Fixing only ceiling fan 1200/1400 mm size, as obtained against Srl item No. 206.00 here-in-before, after B/R repairs. Note: Cost of minor petty items if required such as nut bolt/clampis included in quoted rate. |
| 277 | Fixing only exhaust fan/ fresh air , as obtained against Srl item No. 206.00 here-in-before, after B/R repairs. Note: Cost of minor petty items if required such as nut bolt/clampis included in quoted rate. |
| 278 | Supply and fixing Heavy duty, Exhaust fans 300 mm sweep, 90 watt, 1400 RPM , 1060 cub mtr/ hour air delivery with special designed metal blade , powder coated long lasting finish , sturdy steel bird guard with louvers and frame including circular hole shalll be provide in the wall to suit the size of the frame which shall be fixed by means of rag bolts embedded in the wall. The hole shall be neatly plastered to the original finish of the wall and connected with and including three core 1.5 sqmm , PVC insulated but unsheathed FRLS cable with multistranded copper conductors from ceiling rose to fan complete all as specified and directed by Engineer in Charge. Make :- Model No Ventilair DS FHVVMTDSB12 of Havells or eqvt in bajaj and CG. |
| 279 | Supply and fixing sheet steel metal enclosure single pole & neutral with a 2 pin and earth plug and socket complete with one single pole MCB SP 20 Amp, 240 volts complete all as specified and directed by Engineer in Charge. |
| 280 | Material and labour for earthing complete with galvanised earth plate electrode 600 X 600 X 6 mm thick buried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of earth plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire 4 mm dia by means of nuts, bolts, check nuts & washers of galvanised iron or steel all as shown on electrical plate No. 3 of MES schedule 2009, Part – I (Specifications) and connected to main switch board / main DB’s / earthing test point including all necessary excavation and earth work in any type of soil, adequate quantity of charcoal dust & common salt all around the earth plate minimum 150 mm in all directions with & including watering pipe 20 mm dia GI medium grade, GI funnel made out of 0.63 mm thick GI sheet, wire gauge, 50 mm thick RCC cover in PCC 1:2:4, type B-1, duly reinforced with 6 mm dia mild steel round bars @ 150 mm both ways center to center with suitable lifting handle to cover, earth pit of PCC 1:3:6 type C-1, GI protection pipe light grade 15 mm bore up to 7.5 m length from earth electrode & engraving of earth marking on nearby building with CM 1:4 plate size 200 X 150 X 15 mm & painting of earth result etc. including testing on complete all as specified and directed by Engineer in Charge. Note: - (i) Earth lead and protection pipe beyond 7.5 m shall be measured and Paid separately. (ii) On testing after completion of job, if desired earth resistance is not obtained, the earthing shall be redone by the contractor without any extra cost to Govt. |
| 281 | Material and labour for laying of LT cable of 1100 volt XLPE insulated and PVC sheathed of size 35 sqmm 3.5 core with cable gland including taking down oldunserviceble cable complete all as specified and directed by Engineer-in-Charge. ( For Officer Md Accn) |
| 282 | Material and labour for laying of LT cable of 1100 volt XLPE insulated and PVC sheathed of size 25 sqmm 4 core with cable gland including taking down oldunserviceble cable complete all as specified and directed by Engineer-in-Charge.( For JCO/OR Md Accn ) |
| 283 | Excavation in trenches in any type of soil n.exc. 1.5 mtr wide and n.exc1.5 mtr in depthall as specified & directed. |
| 284 | Returning, filling in, any type of soil and spreading in layers n. exc 25cm thick each layer including watering & well ramming complete all as specified& directed. |
| 285 | Removal of surplus soil to a distance n.exc 50 mtr & depositing where directed at a level n. exc. 1.5mtr above the starting point complete all as specified & directed. |
| 286 | Material and labour for brick protection to cable using old size sub class "B"bricks, laidflat, dry butt jointed, laid lengthwise perpendicular to the axis of cable all as specified & directed. |
| 287 | Material and labour forsand cushioning with layer of sand 8 cm thick before laying of cable and 15 cm after lying of calbe in trenches complete all as specified & directed. |
| 288 | Material and labour forboring of hole under road for passing of electriccable including double wall corrugated (DWC) pipes made of high density polyethylene (HDPE) of of size 75 mm outer dia and 61 mm inner dia complete all as specified and directed by Engineer in Charge. |
| 289 | Supply and fixing /laying galvanised pipe 50mm bore light grade fixed to pole with clamps nuts, bolts and washers or laid under road crossing or fixed to wall complete all as specified and directed by Engineer in Charge. |
| 290 | Supply and fixing /laying galvanised pipe 40mm bore light grade fixed to pole with clamps nuts, bolts and washers or laid under road crossing or fixed to wall complete all as specified and directed by Engineer in Charge. |
| 291 | Supply and fixing high speed wall mounted fan of sweep size 300 mmcomplete withwide oscillation with motorised control including fitting and fixtures as per site+B182 requirementand two core PVC insulated, PVC sheathed copper conductor for connection all as specified and directed. Make :- Modal No FHWSWHSOWH12 of Havells or eqvt in bajaj and CG. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
