Military Engineer Services-MES has published Tender For Repair/Replacement Of Electric Wiring, Fittings, Fixtures And Summer Appliances For Md Accommodation At Patiala Under Ge South Patiala. Submission Date for this Tender is 14-05-2024. Electrification Work Tenders in patiala Punjab. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| e79a808b-4181-4d67-971f-675833538e6a.html | Tender Notice | 0 KB |
| BOQ_728571.xls | Tender Document | 0 KB |
| Tender01.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | "Notes: (i) Please refer Schedule "A" Notes of tender documents. |
| 2 | Excavation and Earth work |
| 3 | Excavation in trenches n.exc 1.5m wide and not exceeding1.50m in depth for laying of pipes, cables, poles, stay and strips etc not exc 10 sqmon plan and n.exc 1.50m in depth and getting out all in soft/loose soil allas specified and directed. |
| 4 | Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm all as specified anddirected. |
| 5 | Removing excavated materials soil to a distance not exc 50m and depositing where directed at a level n.exc 1.50 m above the starting point complete all as specified and as directed. |
| 6 | Internal Wiring |
| 7 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceiling roses, pendants, regulators, socket, call bells, lamp holders, brackets, bulk head fittings, batten fittings, mirror light, Surface LED panels, LED fittings etc. including making good the disturbed surfaces after necessary repair complete all as directed. |
| 8 | Material and Labour for point wiring complete withPVC insulated unsheathed 1100 volt grade FRLSH cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through in existing PVC conduit, concealed in wall and ceiling portion, removing old concealed sunk in pressed steel terminal boxes, top plate, cover and providing concealed sunk in pressed steel terminal boxes, top plate and cover, the same fixed with and including brass screws and cup washers with and including 1.5 sqmm FRLSH multi stranded copper conductor as continuous earth wire drawn in same concealed conduit, connected to main earth and earth dolly for One switch for one light/fan/socket outlet point complete all as specified and directed. |
| 9 | All as per item No. 3.02 above but for One 3/5 socket outlet point 6 Amp on the same board with other switches complete all as specified and directed. |
| 10 | All as per item No. 3.02 above but for One 3/5 socket outlet point 6 Amp on the independent board with other switches complete all as specified and directed. |
| 11 | Material and Labour for point wiring complete withPVC insulated unsheathed 1100 volt grade FRLSH cable with multi stranded copper conductor of size 2.5 Sq mm (Nominal area) drawn through in existing PVC conduit, concealed in wall and ceiling portion, removing old concealed sunk in pressed steel terminal boxes, top plate, cover and providing concealed sunk in pressed steel terminal boxes, top plate and cover, the same fixed with and including brass screws and cup washers with and including 2.5 sqmm FRLSH multi stranded copper conductor as continuous earth wire drawn in same concealed conduit, connected to main earth and earth dolly for One socket outlet 15Amp point complete all as specified and directed. |
| 12 | Material & Labour formodular socket 6A-16Amp- 2/3 pin combined, 2 module type complete all as specified and directed. |
| 13 | Material & Labour formodular socket 6Amp- 2/3 pin combined, 2 module type complete all as specified and directed. |
| 14 | Material & Labour formodular switch 1 way 6Amp,1 module type complete all as specified and directed. |
| 15 | Material & Labour formodular switch 1 way 16Amp,1 module type complete all as specified and directed. |
| 16 | Material & Labour formodular bell push 6Amp,1 module type complete all as specified and directed. |
| 17 | Material & Labour for modular fan step regulaor, 120Watt, AC, 230 volt, 2 module type complete all as specified and directed. |
| 18 | Material & Labour for modular surface type ceiling rose, 65mm x 50mm, 3 terminal PVC /Polycarbonate isolated body fixed on PVC block complete all as specified and directed. |
| 19 | Supply and fix sub-main wiring with 2 single core PVC insulated and unsheathed cable with stranded copper conductor of 6 Sq mm drawing in existing concealed conduit with all accessories and making good of disturbed surfaces as per existing specifications and one additional 1 run of wire of 6 Sq mm but green in colour for earth DBs and boxes with proper thimbles IN REPLACEMEMNT complete all as specified and directed. Note for payment pupose: 3 run of 6 sqmm submain wiring measured as one running meter |
| 20 | Supply and fix sheet metal enclosure MCB DB, SPN, 240 volts, 8 way, double door with 200Amp rated bus bar type, grouting in wall in cement mortar 1:3, IP54, making good of disturbed surfaces and matching with existing and inclding electrical connections with copper thimbles, IN REPLACEMENT complete all as specified and directed. |
| 21 | Supply and fix MCB SP, 230volt , 50 Hzs, 6 to 32 A, 10 KA , "C" series, IN REPLACEMENT complete all as specified and directed. |
| 22 | Supply and fix decorative wall mounting, style antique golden, single shade, round type, including 9Watt LED Lamp, IN REPLACEMENT complete all as specified and directed. |
| 23 | Supply and fix decorative wall mounting, style antique golden, double shade, round type, including 9Watt LED Lamp (02 Nos), IN REPLACEMENT complete all as specified and directed. |
| 24 | Supply and fix MCB SPN, 230volt , 50 Hzs, 6 to 32 A, 10 KA , "C" series, IN REPLACEMENT complete all as specified and directed. |
| 25 | Supply and fix 20 watt decorative ultra slim, square profile LED lighting fixture, extruded polycarbonate, environmental friendly, energy efficient, including necessary accessories/fittings as requried, making electircal connections from ceiling rose to connector with suitable size of electrical cable and making good the disturbed surfaces as per existing specifications complete all as specified and directed. |
| 26 | Supply and fix 10 watt decorative ultra slim, square profile LED lighting fixture, extruded polycarbonate, environmental friendly, energy efficient, including necessary accessories/fittings as requried, making electircal connections from ceiling rose to connector with suitable size of electrical cable and making good the disturbed surfaces as per existing specifications complete all as specified and directed. |
| 27 | Supply and fix 9 Watt mirror light with linera & compact decorative end caps, polycarbonate body and ribbed opal diffurser of capacity 9watt incluidng making electircal connections from ceiling rose to mirror light with suitable size of electrical cable and making good the disturbed surfaces as per existing specifications complete all as specified and directed. |
| 28 | Supply and fix 18 Watt square surface mounted LED panel PDC, aluminium housing and high tranlucent frosted plastic diffuser of luminair efficiancy 100 lumen per watt incluidng making electircal connections from ceiling rose to mirror light with suitable size of electrical cable and making good the disturbed surfaces as per existing specifications complete all as specified and directed. |
| 29 | Supply and fix 18 Watt round surface mounted LED panel PDC, aluminium housing and high tranlucent frosted plastic diffuser of luminair efficiancy 100 lumen per watt incluidng making electircal connections from ceiling rose to mirror light with suitable size of electrical cable and making good the disturbed surfaces as per existing specifications complete all as specified and directed. |
| 30 | Supply and fix angular type lamp holder, PVC polycarbonate type with back plate, 15/18 watt incluidng plastic square board of required size incluidng making electircal connections and making good the disturbed surfaces as per existing specifications complete all as specified and directed. |
| 31 | Supply and fix 9watt LED lamp complete all as specified and directed. |
| 32 | Supply and fix call bell, ding done type,AC, 230 volt, single pole complete all as specified and directed. |
| 33 | Supply and fix 1x25watt new generation, energy saving and environmental friendly long life LED building security light made up of pressure die cast alluminium housing with high power LED as lilght source and lense embedded PC vpver haing top opeing serparate dirver compartment with IP 65 protection and impact resistance of IK07, with and including all accessories, suitable bracket 32mm bore AC, 230 volt, single pole complete all as specified and directed. |
| 34 | Supply and fix 10watt decorative oval bulk head edge-lit LED luminaire, environmental friendly, ultra modern, energy saving , surface mounted, luminaire comprising of high brightness LEDs complete all as specified and directed. |
| 35 | Supply and fix 25sqmm 3.5core XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cables (heavy duty) stranded aluminium conductor including cable glands, cable lugs etc. to suit the cable size, 1100 volt grade, ISI marked,laid in trenches or fixing along the poles or passing through the pipes or laid under floors or through walls/ducts etc.IN REPLACEMENT complete all ll as specified anddirected. NOTE: 1. Excavation, earth work, sand cushioning, cable cover & pipe for cable protection shall be measured and paid for separately. 2.The quantity of old bricks as obtained form trenches shall be the quantity considred in Schedule of Credit as per item No. 3.30. |
| 36 | Material and labour for bricks common burnt clay building bricks, sub class "B" , Designation 75 , laid adjacent to each other length wise perpendicular to the central axis of cable complete all as specified and directed. |
| 37 | Material and labour for clean dry sand laid in trenches/ducts for bedding andcushioning to cable, 8cm in depth before laying the cable and 15 cm in depth after laying the cable including spreading, levelling and consolidation complete all as specified and directed. Note : Consolidated/punned sand shall be measured for payment purpose. |
| 38 | Material and labour for GI Tubes, light grade", galvanised, 40 mm bore, passing through cables under the floo, along the wall/pole IN REPLACEMENT complete all as specified and directed. |
| 39 | Material and labour for Earthing complete with and including galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm surrounded by a mixture of charcoal and salt in alternate layers burried directly in ground vertically in a pit of depth not less than 2.25 m deep below ground level with top edge of earth plate at a depth of not less than 1.5 m below ground level, connected with and including galvanised iron or steel earth wire, 4mm dia (No. 8 SWG) by means bolts, nuts, check nuts and washers made out of galvanised iron, 15 mm bore (light grade) GI pipe for protection of earthing lead, 20 mm bore (light grade) GI pipe for watering with funnel, wire mesh and including necessary excavation and earth work, PCC 1:2:4 type B-1 pit and 50 mm thick RCC M-25(Design mix) reinforced with XPM (weight not less than 3 kg/sq m) pit cover, C.I frame, charcoal and comman salt filling in alternate layers, IN REPLACEMENT complete all as shown and specified in electrical plate No. 3 of SSR Part-I (2009). Note : The unit rate includes for protecton pipe 15mm and GI earth strip 4mm from top of earth plate upto 7.50 metre above ground level. |
| 40 | Supply and fix in replacement sheet metal enclosure DBs, double door three phase, 415 volt, 4 ways, confirming to IP54 (one incoming three phase & four out goings three phase) for MCCB,comprising three phase four wire copper strip bus bar of appropriate capacity complete all as directed comprising of the following: - (a) MCCB, 4 pole, 100 Amp, A, 415 volt, 10kA = 01 No, NOTE: (i) The DB shall be VTPN series of MDS-load contact. (ii) The DB shall be flush fixed and making good the disturbed surface matching with the existing specifications and the quoted rate include for the same. (iii) Connections of the MCCBs/MCBs with cable shall be made through appropriate size pin/bottle type thimble-properly crimped. (iv) All the vacant holes of the DB shall be proved with blank plates of appropriate siz. (v) Double continuous earth wire shall provided for each three phase DB from earthing mains dolly. |
| 41 | Supply and fix MCB TPN, 63A, 415 volt, IN REPLACEMENT complete all as specified and directed. |
| 42 | Supply and fix MCCB, 63A, 4 pole, 415 volt, IN REPLACEMENT complete all as specified and directed. |
| 43 | Supply and fix sunken/pressed metal flush box of any module and white modular cover plate with frame for mounting of switches/sockets etc. including modular switch 6Amp, modular socket 6 Amp, 230 volt, and makding good the disturbed surfaces as per existing specifications IN REPLACEMENT complete all as specified and directed. |
| 44 | Supply and fix sunken/pressed metal flush box of any module and white modular cover plate with frame for mounting of switches/sockets etc. including modular switch 16Amp, modular socket 16 Amp, 230 volt, and makding good the disturbed surfaces as per existing specifications IN REPLACEMENT complete all as specified and directed. |
| 45 | Supply and fix sunken/pressed metal flush box of any module and white modular cover plate with frame for mounting of switches/sockets/fan regulators etc. including modular switch 6Amp, modular socket 6 Amp, stepped type fan regulator 2 mdoule, 230 volt, and makding good the disturbed surfaces as per existing specifications IN REPLACEMENT complete all as specified and directed. |
| 46 | Supply and fix sheet metal enclosures with Single Pole andNeutral earth plug sockets, 16 Amp, with and including controlled by one No.MCB SPN rating 20 Amps , 415 Volts grade, IN REPLACEMENT complete all as specified and directed. |
| 47 | Supply and fix MCCB, 100A, 4 pole, 415 volt, IN REPLACEMENT complete all as specified and directed. |
| 48 | SUMMER APPLIANCES |
| 49 | Material and labour for collecting the ceiling fan 1200/1400mm sweep (any make/type/ model and taking out motor, removing all coil (burnt or alive), rewinding all the coils with suitable size of super enamelled copper wire, ISI marked including all packing material, insulating materials, varnishing, greaisng, oil, re-assembling, split pins, body/blade screws, writing MES NO. with one coat of synthetic enamel paint and testing on full speed) from E/M storeyard for necessary repair/serviceing and submit the same to E/M storeyard complete all as directed. |
| 50 | All as per item No. 4.01 but exhaust fans upto and including 230/300mm sweep |
| 51 | All as per item No. 4.01 but exhaust fans exceeding 300mm sweep but not exceeding 480mm sweep |
| 52 | All as per item No. 4.01 but wall mounted fans upto and incluidng 450mm sweep |
| 53 | Material and labour for gun metal bush for ceiling fans/exhaust fans/wall mounted fans of any make/type/model/size IN REPLACEMENT complete all as directed. |
| 54 | Material and labour for bearing for ceiling fans/exhaust fans/wall mounted fans/desert cooler fans of any make/type/model/size IN REPLACEMENT complete all as directed. |
| 55 | Material and labour for capacitor 2.5mfd, 230 volt+5% dry type IN REPLACEMENT complete all as directed. |
| 56 | Material and labour for capacitor 3.15mfd, 230 volt+5% dry type IN REPLACEMENT complete all as directed. |
| 57 | Material and labour for capacitor 4.0mfd, 230 volt+5% dry type IN REPLACEMENT complete all as directed. |
| 58 | Material and labour for rubber reels, nuts, bolts, spring washer for ceiling fans IN REPLACEMENT complete all as directed. |
| 59 | Taking down ceiling fans/wall fans (any size, make, type) from any position, opening for and including greasing, cleaning complete overhauling including splilt pins, body/blade screws, capacitor of suitable size, refixing to its original position including making connections with and including copper conductor twin core, PVC insulated cable of size 23/.0076, 750mm long and one run of earht wore and tapping rubber insulating complete all as directed. |
| 60 | Taking down exhaust fans/wall fans (any size, make, type) from any position, opening for and including greasing, cleaning complete overhauling including splilt pins, body/blade screws, capacitor of suitable size, refixing to its original position including making connections with and including copper conductor twin core, PVC insulated cable of size 23/.0076, 750mm long and one run of earht wore and tapping rubber insulating complete all as directed. |
| 61 | Material and labour for ceiling fan blade (Set of 3) of 1200mm sweep (any make/model) and colour of fan blade as per colour of ceiling fan at site, with and including nuts, washers etc. IN REPLACEMENT complete all as directed. |
| 62 | Material and labour for ceiling fan blade (Set of 3) of 1400mm sweep (any make/model) and colour of fan blade as per colour of ceiling fan at site, with and including nuts, washers etc. IN REPLACEMENT complete all as directed. |
| 63 | Labour only for turning, grinding and making good to ball bearing in proper position complete all as directed. |
| 64 | Supply and connecting flexible copper wire of size 1.00 mm 3 core (whire colour) IN REPLACEMENT complete all as directed. |
| 65 | Supply and fix louvers made out of 0.63mm galvanised iron sheet for exhaust fan of any make and size upto 300mm IN REPLACEMENT complete all as directed. |
| 66 | Supply and fix louvers made out of 0.63mm galvanised iron sheet for exhaust fan of any make and size upto 380mm/450mm IN REPLACEMENT complete all as directed. |
| 67 | Material and labour PVC canopy (upper and bottom) for ceiling fan of any make and size IN REPLACEMENT complete all as directed. |
| 68 | Supply and fix factory made 60cm long MS down rod of 15mm bore, medium grade, for hanging of ceiling fans duly threaded, having necessary holes and duly painted with synthetic enamel paint IN REPLACEMENT complete all as directed. |
| 69 | Material and labour for spray painting on outside body of ceiling fans including blades any size with synthetic enamel apint (white colour) including scraping old paint and writing MES NO. with black paint (Synthetic enamel paint) complete all as directed. |
| 70 | Material and labour for spray painting on outside body of ceiling fans including blades any size with synthetic enamel apint (smoke grey colour) including scraping old paint and writing MES NO. with black paint (Synthetic enamel paint) complete all as directed. |
| 71 | Material and labour for disconnecting and taking down desert cooler fixed at any position/location, cleaning the body internally and externally by scrapping all scales, dirt etc. and repair to desert cooler to stop any type of leakage, tightening and replaceing of screws, nuts, bolts and washers incluidng refixing to its original position complete all as directed. NOTE: The unit quoted rate include the cost of providing and fixing nuts, bolts and washers as requried as mentioned above and nothing extra shall be paid to the contractor on this account. |
| 72 | Supply and fixng water lifting pump, 230 volt, 50C/S, single phase suitable for desert cooler complete all as directed. |
| 73 | Supply and fixng wood wool pads of suitable size including provision of wire netting with GI wire size 1.40mm dia and 25mm mesh size for holding pads for desert coolerIN REPLACEMENT complete all as directed. |
| 74 | Supply and fixing high density PVC pipe of size 15mm dia suitable for desert cooler of required length IN REPLACEMENT complete all as directed. |
| 75 | Material and labour for rewinding of fan motor of desert cooler with super enamelled winding copper wire of suitable size, varnishing and providing new bushes, beraings, washers etc and testing the same complete all as directed. |
| 76 | Supply and fix complete steel body of desert cooler of capacity 4000cfm with front grill, side and back panels IN REPLACEMENT complete all as directed. The body of the desert cooler will be fabricated as under: - (a) The tip and bottom made out of 1.25mm thick GI sheet. (b)Side panels (Set of three) made out of 1.00 mm thick GI sheet. (c)Front grill of suitable size and approved quality. (d)Necessary wiring complete. |
| 77 | Supply and fixing air direction grill of suitable size with name plate made out steel IN REPLACEMENT complete all as directed. |
| 78 | Supply and fixing PVC copper wire of length 2.00 metre with 3 pin plug top, 5 Amp having single phase, neutral and earth wire of size 0.75sqmm and making necessary connections from motor to regulator/switch IN REPLACEMENT complete all as directed. |
| 79 | Supply and fixing regulator knob type switch, 3 step control of speed of desert cooler motor, 230 volt, 50 Hz IN REPLACEMENT complete all as directed. |
| 80 | Supply and fixing 6A switch for air circulation system and water lifting pumping system IN REPLACEMENT complete all as directed. |
| 81 | Supply and fixing motor holding clamps made out of steel duly painted with two coats of synthetic enamel paint over a coat of red oxide primer IN REPLACEMENT complete all as directed. |
| 82 | Supply and fixing motor holding ring made out of metal duly painted with two coats of synthetic enamel paint over a coat of red oxide primer IN REPLACEMENT complete all as directed. |
| 83 | Supply and fixing side and rear panes made out of steel (1.00mm thick GI Sheet) for desert cooler of standard sizeIN REPLACEMENT complete all as directed. |
| 84 | Supply and fixing water storage bottom body (storage capacity 40 ltr) made out of steel (1.25mm thick GI Sheet) for desert cooler of standard sizeIN REPLACEMENT complete all as directed |
| 85 | Supply and fixing to desert cooler PVC fan blade of superior quality (having 3 branches) IN REPLACEMENT complete all as directed. |
| 86 | Dismantling of fresh air fan of any sweep (any made and type), taking out rotor, removing coil (burnt or alive), rewinding the same with super enamelled copper wire ISI marked including all packing material, insulating material, varnishing, greasing, oiling, reassembling, split pins, body/blade shade screws and testing on full speed complete all as directed. |
| 87 | Supply and fix ceiling fans AC single phase 230/240Volt of size 1200mm sweep, BLDC, BEE five star rated with louver including fixing the fan with all connecting accessories andmaking electric connections from ceiling rose etc. complete all as directed. NOTE: Old ceiling to be deposited in MES Storeyard. |
| 88 | Supply and fix exhaust fans AC single phase 230/240Volt of size 300mm sweep, BEE, five star rated with louver including fixing the fan with all connecting accessories andmaking electric connections from ceiling rose etc. complete all as directed. NOTE: Old exhaust to be deposited in MES Storeyard. |
| 89 | Supply and fix desert cooler motor(copper winding), 230 volt, 50 C/S, single phase complete all as directed. NOTE: Old desert cooler motor to be deposited in MES Storeyard. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
