Military Engineer Services-MES has published Tender For Repairs Cleaning And Servicing To Sewage Disposal System Of Gachham Birpur And Bomdila In The Area And Repair / Maint To Flooring Tiling Joinery Plumbing, Sanitary Fiting Cgi Sheet Pvc Water Tanks Roofing Ceiling Panelling Etc At Bomdila. Submission Date for this Tender is 14-05-2024. Shed Construction Tenders in Bomdila Arunachal Pradesh. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| 06aec312-2fc9-46b5-9ce3-8c036d4af8af.html | Tender Notice | 0 KB |
| BOQ_728466.xls | Tender Document | 0 KB |
| tender.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Demolition and breaking up drain pipe (SGSW) set in cement mortar of 150mm bore complete all as specified and directed including PCC benching complete all as specified and as directed. |
| 2 | Demolition and breaking up drain pipe (SGSW) set in cement mortar of 100mm bore complete all as specified and directed including PCC benching complete all as specified and as directed. |
| 3 | S&F PVC (SWR) pipes150 mm bore single socketed, in any length with rubber ring joints, laid in trenches, wall or in floors. |
| 4 | S&F PVC (SWR) pipes110 mm bore single socketed, in any length with rubber ring joints, laid in trenches,wall or in floors. |
| 5 | S&F in repair PVC (SWR) pipes 75 mm bore single socketed, in any length with rubber ring joints, laid in trenches,wall or in floors. |
| 6 | S&F in repairPVC(SWR) bends any radius 150mm bore |
| 7 | S&F in repairPVC(SWR) bends any radius 110mm bore |
| 8 | S&F in repairPVC(SWR) bends any radius 75mm bore |
| 9 | Excavation in trenches n,exc 1.5 m wide and n.exc 1.5 m deep for foundation and getting out in any type of soil. |
| 10 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point |
| 11 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. |
| 12 | M&L cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) to bed of drain pipes including packing under and haunching against the sides of pipes, after they are laid and tested for 160 mm bore pipe complete all as specified and directed |
| 13 | M&L cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) to bed of drain pipes including packing under and haunching against the sides of pipes, after they are laid and tested for 110 mm bore pipe complete all as specified and directed |
| 14 | Cleaning of bloackage EWC/IWC/urinal/bathroom & kitchen, including gully trap, nahani trap & removing of sludge/spoil/waste to a distance exc 100mtr & testing for proper working after cleaning complete all as specified and directed. |
| 15 | Cleaning of SGSW/PVC/AC/CI pipe line 100/110/150/160 mm bore size by roding or by pressure pump completely excludingconnected manhole , any depth & removal of sludge etc to a distance as specified under particular specification Note : Cleaning of man holes between sewage lines are included in the item, nothing extra will be paid on tic account) |
| 16 | Dewatering of Septic tank soakage well and manhole of any depth in any position by pumping out and removing outside Military/Defence land by mechanical means (trolley mounted) and burying in pits all as directed including digging of pits in any type of soil and covering pits with earth after absorption of water and including providing and spreading required quantity of bleaching powder around the pit or dispose of waste material as per state protocol and washing the top of septic tank & soakage wells and surrounds with fresh water and sprinkling lime to make hygeinic complete all as specified and directed by Engr - in Charge. |
| 17 | De-sludging of septic tank of any capacity including connected intercepting chamber, manhole shaft, sludge chamber & filterbeds of any description and in anmy position by pumping out and removing of sludgeoutside Military/ Defence land by mechanical means (trolly mounted) and burying in pits all as directed including digging of pits in any type of soil and covering pits with earth after filling of sludge and including providing and spearding required qty of bleaching powder or dispose of waste material complete as per state protocol,including taking down of slab cover and placing the same in existing postion complete all as specified and directed by Engineer-in-Charge. |
| 18 | Demolition of brick work or solid block /stone boulder masonry, built CM including all quoins, pillars etc. |
| 19 | Material and labour for providing precast cement concrete block masonry 1:3:6 type-C1(using 20mm graded crushed stone aggregate) solid blocks exceeding 10cm in width and set in cement mortar (1:4) complete all as specified and directed. |
| 20 | Demolition of precast reinforcement cement concretein ground floor and paving n.exc 15cm thickness (below or above ground level). |
| 21 | M&L precast cement concrete type B1, 1:2:4 ( using 20mmgraded stoneaggregate) incover slab for manhole and similar articles with plain faces and set in CM 1:6. |
| 22 | Mild steelTMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips. |
| 23 | S&F Mild steel TMT bars 8 mm dia and over, cut to length,bent to shape required, including cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips(TMT) |
| 24 | Taking down of cement plaster of any description on brick including raking out joints,hacking for key,scrubbing down with water etc.complete all as specified and directed. |
| 25 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 and finished the surface even and smooth without using extra cement. |
| 26 | Demolition of cement concrete infloors n.exc 15 cm thick in ground floor (below or above ground level) and in any position all as specified |
| 27 | Demolition of cement concrete (reinforced) in ground floors and paving’s not exc 15 cm thickness (below or above ground level) |
| 28 | M&L PCC 1:4:8 type D2(using 40mm graded aggregate)as in foundation filling and mass concrete etc. |
| 29 | M&L for PCC 1:2:4 type B-1 (using 20 mm graded curshed storne agg) as in coping/bunching and similar work complete all as specified and directed. |
| 30 | Dismantling of floor hearth or wall tilling including cement mortar bedding but not backing , removing serviceable tiles to store and rubbish off the premise complete all as specified and directed. |
| 31 | M&L for glazed ceramic coloured tiles 200x300x5to6mm thick as in dado over and including 10mm thick rendering in CM (1:4) and set and ointed in neat cement slurry and pointed with white cement complete all as spfd and directed. |
| 32 | M&L joint free non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm, over and including 15mm thick screed bed in Cement mortar (1:6)in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed. |
| 33 | S&F in repairs vitreous china Orissa pattern size 580mm x440mm white with ‘P’ or ‘S’ trap front or back inlet and foot rest any pattern complete all as specified and directed. |
| 34 | S&F in repair Vitreous china wash down water closet pan (Pedestal pattern) with matching seat cover, excluding fixing bolts, flushing cister and flush pipe completeall as specified |
| 35 | NOTE :- The entire contract shall be operated for the period of 09 months from the date of acceptance. The work shall be executed on the requirement basis as directed by Eng-in-charge during currency of contract. It will be the responsibility of contractor to maintain the sewage system functional throughout contract periods irrespective of value of work that may be ordered during the period of contract.The contractor or his authorised representative shall report to Engineer-in-charge (or the person deputed by him) at 900 hours daily to receive the complaints pertaining to cleaning of sewage lines. The Engineer-in-charge will issue Job Card to attend the complaints and the Job Card shall be returned by the contractor to the Engineer-in-charge on the given date and time after attending the complaints. The Job Card should bear user?s signature of satisfactory completion of complaints. In case contractor or his authorised representative fails to report to Engineer-in-charge at 900 hours daily to receive the complaints pertaining to cleaning of sewage lines, the contractor shall be liable to pay the penalty @ Rs 1500/- per day and similarly he fails to attend the complaints pertaining to cleaning of sewage lines, the contractor shall be liable to pay the penalty @ Rs 500/- per day per complaint. In case of any dispute regarding imposition of penalty, the decision of Accepting Officer shall be final and binding. |
| 36 | Dismantling plain or corrugated steel sheeting of any thickness as in roof coverings complete all as specified and directed. |
| 37 | Supply and Fix 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws and washers, in roofs, walls etc. with grade of zinc coating 275 gsm complete all as specified and as directed. |
| 38 | Supply and Fix 0.80 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings ( length and girth as fixed) with grade of zinc coating 120 gsm complete all as specified and as directed. |
| 39 | S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof coveringcladding to wall, fixed with self tapping screws as specified. |
| 40 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified. |
| 41 | M&L for preparing and applying two coat of synthetic enamel over a primingcoat onnew zinc (or galvanised ) surfaces to receive painting, by coating with mordant solution including washing and cleaning etc. of any description, not otherwise described, over 10 cm width or girth. |
| 42 | M & L for Preparation of new or previously untreated steel surface and applying two coat of synthetic enamel paint over a coat of red oxide primer to steel and iron surfaces of any description over 10 cm in width or girth not otherwise described including preparation of new steel surfaces. |
| 43 | Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones. |
| 44 | Supply and Fixingsheet glass 3mm thick ordinary quality and glazing with oil putty in squares n exc0.50 Sqm in each pane.(Make: Trivani/Modi Float/Gold Fish) |
| 45 | Supply and Fixing 3 mm thick figured glass, pin head glazing with oil putty in squares n exc 0.50 Sqm in each pane.(Make: Trivani/Modi Float/Gold Fish) |
| 46 | M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggragate as in subbase 40 mm thick complete all specified and directed by engr in charge. |
| 47 | M&L for 15 mm thick screed bed in CM 1:6 for laying floor tiles. |
| 48 | M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding .11 sqm,in floors etcset and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. |
| 49 | M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding .18 sqm,in floors etcset and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. |
| 50 | M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding .38 sqm, in vertical surfaces etcset and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. (Make; Kajaria/ Orient Bell/ Johnson/ Somany). |
| 51 | M & L for 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finished rough to receive tiles . |
| 52 | M&L for Glazed coloured ceramic tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match.(Make; Kajaria/ Orient Bell/ Johnson/ Somany). |
| 53 | Dismantling timber framed work scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in any position complete all as specified. |
| 54 | M&L 2nd class hard wood in scantling clean swan timber fixedas directed. |
| 55 | Dismantling of wall and ceiling board or insulation boards/slabs/blanckets/any thickness including cover fillets |
| 56 | S&F 6 mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work on wall surfaces. |
| 57 | S&F 4 mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work on ceiling surfaces. |
| 58 | M & L for 2nd class Hard wood plain fillets, square, rectangularor triangular in section,wrought, secured with nails or brads, sectional area not exc 3 sq.cm. |
| 59 | M&L for preparation of new wooden surfaces of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. |
| 60 | Dismantling of CI soil, rain water pipes, cast and vent pipes of any dia, any pattern including all fittings. |
| 61 | S&F in rep PVC (SWR) junction single, (single T) equal or unequal with access door110mm dia. |
| 62 | Taking up or down 15 mm bore steel tubing and connections including cleaning for re-fixing or removal to store all as specified and directed. |
| 63 | Taking up or down 20 mm bore steel tubing and connections including cleaning for re-fixing or removal to store all as specified and directed. |
| 64 | S&F of 20 mm dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. |
| 65 | S&F of 16 mm dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. |
| 66 | S&F of 15mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches. |
| 67 | S&F of20mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches. |
| 68 | S & F in repairs fancy type 15mm dia bib tap, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specifed. |
| 69 | S&F in rep Aluminium (Die Cast) body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed. |
| 70 | S&F in rep Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor overall length of cover plate 140mm complete all as specified and directed. |
| 71 | S&F 15 mm dia brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed for bath showers and kitchen sink, complete all as specified and as directed. |
| 72 | S & F in repair looking mirror 600 mm x 450 mm bevelled edge mirror or selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers .(Make :Swastic /Kohinoor /Gold fish /Atul) . |
| 73 | S & F in Towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats |
| 74 | S & F plastic water closet seat cover, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete. |
| 75 | S&F in rep PVC (SWR) floor trap, 75mm dia outlet, plain with grating incl jointing with solvent cement. |
| 76 | S&F of Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 77 | S & F in repair chromium plated 15mm dia pillar taps fancy type copper alloy with capstan heads,screwed down high pressure, with or without lettered "hot or cold" with long screwed shanks and fly nuts, screwed for iron pipe and fixed. |
| 78 | S & F in repair chromium plated 15mm dia stop cock cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified |
| 79 | Supply and Fix in repair toilet paper holder supar of brass chromium plated fitted to wall with CP/ brass screws of complete all as specified and directed” |
| 80 | S&F in repair Grating doom 125mm dia with and without wast holePTMT (Minimum weight 40 grms) |
| 81 | S&F in repair Grating doom 100mm dia with and without wast holePTMT (Minimum weight 40 grms) |
| 82 | S&F in repair 32mm PVC waste pipe for kitchen sink, WHB and Urinal complete all as specified and directed |
| 83 | S&F in repair waste coupling PTMT 32mm(half or full threaded) min weight 60gms complete all specified and directed |
| 84 | S&F in Repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum),with grating and union for discharge pipeVitreous China urinals, , complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) |
| 85 | S&F in Repairs Vitreous China Half shall typel flat back,(minimum),with grating and union for discharge pipeVitreous China urinals, , complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) |
| 86 | S&F in repPVC (SWR) WC connector 110mm dia. |
| 87 | S&F in repairs 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve, float, and brackets etc complete. (Make: Hindware /Parryware /Cera /Commander). |
| 88 | S & F in repair PVC connection 15mm dia 450 mm long with brass check nuts and washers complete all as specified. |
| 89 | S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm. |
| 90 | S&Fin repairs vitreous china wash hand basin white flat back of size 550mmx400 mm including CI bracketscomplete all as specified and directed(Make: Hindware/Parry) |
| 91 | Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for. |
| 92 | M&L for providing precast reinforced cement concrete 1:2:4 type B1 using 20 m gradedstone aggregate as in landings,staircase slab, cover slabs(for men holes etc) chullah hoods,chhajjas water troughs mangers,shelves and similar articles with plain faces. |
| 93 | M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work flat rough finishednot exceeding 200mm thick complete all as specified and directed |
| 94 | M&L for 40 mm thick PCC 1:2:4 type B1 (using 20 mm graded granite stone aggregate) in floorings including finishing the surface even and smooth using extra cement all as specified |
| 95 | M&L for 75mm thick PCC 1:3:6 type C1 using 40 mm graded stone aggregate as in plinth protectionsurfacefinished even and smooth using with extra cement |
| 96 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exc 4 Sqm. |
| 97 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sqm |
| 98 | S &F in repair Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified |
| 99 | S & F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete |
| 100 | Supply and fix 30 mm thick 2nd class hardwood plain framed paneled shutters (any numbers of panels) with panel of timber flat on both sides (feather edged) complete including fitted to chowkats |
| 101 | S & F 30mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc but divided into squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads etc |
| 102 | Material and labour for preparation of new or previously untreated surface of wood and wood based materials over 10 Cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer |
| 103 | S&F MS window guard bars, window frames etc articles confirming to Fe 410-0 or Fe 310-0. |
| 104 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing |
| 105 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm widthtuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of lain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheetbeading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 106 | S & F 100mm size mild steel butt hinges medium weight cold rolled and fixed. |
| 107 | S & F 75mm size mild steel butt hinges medium weight cold rolled and fixed. |
| 108 | S& F Aluminium anodised barrel tower bolts150mm long of extruded section and fixed |
| 109 | S& F Aluminium anodised barrel tower bolts100mm long of extruded section and fixed |
| 110 | S & F 150mm size extruded aluminium alloy handles, fabricated type anodised |
| 111 | S & F 100mm size extruded aluminium alloy handles, fabricated type anodised |
| 112 | S&F aluminium alloy, anodised, sliding door bolts 300mm size with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed |
| 113 | S&F GI steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm etc all as specified. |
| 114 | S&F PVC coated 25mm dia mild steel curtain rod of medium weight and fixing brackets, curtain ring @ 7 nos/Rm and decorative end supports etc complete all as directed” |
| 115 | M&L rendering 15 mm thick onbrick or concrete block masonry in CM 1:6 |
| 116 | Preparing newly plastered surfaces of walls and applying three coats of white wash. |
| 117 | Dismantling of water tanks exc 500 ltrs & n exc 1000 ltrs capacity and removing to stores. |
| 118 | S & F poythene water storage tank of 1000 ltrs capacity rotational moulded (multilayered, cylindrical vertical with closed top) hoisted and fixed in position all as specified. |
| 119 | S & F ofball brass valves, high pressure, with polyethene float and flynut complete screwed for iron pipe of 20mm dia all as specified (Make : Jindal/Leader/Scico) |
| 120 | M & L 15 mm thick rendering on cement mortar 1:6 on brick or concrete surfaces finished even & smooth without using extra cement |
| 121 | M&L Preparing new plastered surfaces of wall and applying Two coats of acrylic distemper/ distemper oil emulsion (OBD),over a coat of 3mm thick wall care putty all as specified including preperation of surfaces |
| 122 | Preparing newly plastered surfaces of walls and applying three coats of white wash. |
| 123 | Material and labour for 10mm thick rendering in cement mortar (1:4) on brick or concrete surfaces finished even & smooth W/O using extra cement. |
| 124 | M&L for applying Two coats of cement base paint on surfaces of walls over one coat of primer all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
