Tender For Various Electric Work Against Municipal Corporation For Quality Power Supply In Aligarh City On Semi Turn-Key Basis Under The Area Eudd-1 Aligarh, E-Tender Specification On Semi-Turn Basis Under Municipal Corporation For The Work Of Strengthen, aligarh-Uttar Pradesh

tender for Various Electric Work Against Municipal Corporation For Quality Power Supply In Aligarh City On Semi Turn-Key Basis Under The Area Eudd-1 Aligarh, E-Tender Specification On Semi-Turn Basis Under Municipal Corporation For The Work Of Strengthening The Distribution System For Quality Electricity Supply In The Area Of ​​Electricity Urban Distribution Division-I, Aligarh. As Per Desired Task, 1 Safe Carriage Of Following Material From Store Centre, Sarsol, Aligarh To The Respective Site Of Work Including The Work Of Its Loading & Unloading At The Repective Ends And Its Erection As Per Direction Of Supervising Engineer, Including The Cost Of Arrangement Of Labour, T&P Carrier Etc. Required For Proper Completion Of Work As Per Resspo Norms:- 2 11 Mtrs. St Pole 3 9 Mtrs. St Pole 4 Distribution Transformer 250 Kva 5 Distribution Transformer 400Kva 6 11 Kv Xlpe Cable 3X70sq.Mm. 7 11 Kv Xlpe Cable 3X185sq.Mm. 8 Acsr Weasel Conductor 9 Acsr Dog Conductor 10 Ab Cable 3X120+1X95+X16 Sq.Mm. 11 L.T. Al. Xlpe Cable 1X240 Mm. 12 L.T. Pvccable 1X400 Mm. 13 Distribution Box With Clamp 14 Earthing Complete 15 Stay Complete ( Gi Stay Rod 16X1800mm, 5 Kgs. Stay Wire 7 / 8, Stay Clamps, Insulator, Bolts, Nuts & Washers ) 16 11 Kv D.O. Fuse Set 17 11 Kv Tpmo 18 11 Kv Pin Insulator With Pin 19 Polymer Disc Insulator With Fitting 20 11 Kv Cable Jointing Kit 3X70sq.Mm. ( Outdoor ) 21 11 Kv Cable Jointing Kit 3X185sq.Mm. ( Outdoor ) 22 Stone Pad 23 Abc Connector ( Piercing ) 24 Suspension Clamp With I Hook 25 Deadend Clamp Withi Hook 26 Al Lug 240 Sqmm 27 Al Lug 400 Sqmm 28 Top Channel Size 125X65x2240 Mm. 29 Dropper Channel Size 100X50x2028 Mm. 30 Tee Off Chennal Size 125X65x1300 Mm. 31 M.S. Base Angle Size 75X75x6x2028 Mm. 32 Pole Clamp With Nut & Bolt 33 Danger Board With Clamp 34 Barbed Wire 35 Nut Bolt & Washer 36 Number Plate With Clamp 37 Aluminium Winding Wire 38 Red Oxide Paint 39 Alluminium Paint 40 T / F End Clamp 240 Sqmm 41 T / F End Clamp 400 Sqmm 42 Neutral & Body Earthing Of Power Transformer, Distribution Transformer & Incoming / Outgoingvcbs Installed At Various 33 / 11 Kv Sub-Stations By Digging Of Pit Upto Water Level Depth ( Approx. 125 Feet ) And Then Inserting 1-¼” Dia Gi Pipe Of ‘A’ Grade, Conforming To The Requirement Of Is Specification And Then Connecting The Top Of The Inserted Pipe And Transformer Body Through Gi Strip Of Size 40X6 Mm With The Help Of Nut And Bolt Or Through Gas Welding, As Per Direction Of Supervising Engineer. It Includes The Cost Of All Material Labour, T&P, Carrier Etc. Required For Proper Completion Of Work. The Aforesaid Work Shall Be Carried Out As Per Resspo Norms. 43 Construction Of Plinth At Various 11 / 0.4 Kv Sub-Station Suitable For Distribution Transformer Having Size 5’X 5’ X 5’ Out Which 2’ Below The Ground. Work Will Include Digging Of Foundation 2’ Deep & Brick Work With Ist Class Bricks Having Cement And Sand Mortar Of Ratio 1:6 On All The Walls, Each Of 9” Thickness. The Area Inside The Wall Shall Be Duly Filled By Mud Up To The Height Of Appropriate Level From Ground Level And Shall Be Duly Watered & Rammed. Above The Filling C.C. Of Ration 1:6:12 ( Cement Sand And Brick Ballast ) Giving 4” Layer Shall Be Provided. Above C.C. Layer Rcc Layer Having 4” Thickness And With Ratio 1:2:4 Of Cement Sand And Stone Ballast Shall Be Provided Re-Enforcement Shall Be Provided By Providing Net Of ( 8 Nos. + 8 Nos. ) M.S. Rods Of Size 10 Mm Dia And Each Of 5’ Length In The Middle Of The Top Of C.C. Layer. The Plinth Shall Be Plastered With 12Mm Thick Plaster In Ratio 1:4 At All Sides. This Work Will Include Cost Of Labour, T&P And All Material Required For Construction Of Plinth Which Shall Be Provided By The Contractor As Per Resspo Norms. 44 Providing And Fixing Of Welded Wire Mesh Fencing Around Transformer Plinth With M.S. Angle Of Size 35X35x6 Mm. Length And 1.20 Meters Height, Such Panels Shall Be Supported On M.S. Angle From Of Size 40X40x6 Mm. Having 04 Nos. Corner Supports Of Height 1.65 Meters Including Extended Legs For Grouting Which Will Be Used As A Door For Entry Of The Personnel Or Removal / Shifting Of Transformer With Welded Hinges, Sliding Belt Etc. For Locking The Arrangement As Per Drawing And Specifications The Fencing Will Be Painted One Coat Of Red Oxide Primer And Then Two Coats Of Bus Green Synthetic Enamel Paint. The Rates Should Be Inclusive Of All Materials Required For Proper Completion Of Above Work ( Length Of Each Fencing Approx. 11 Meters ) 45 Dismantling And Removal Of Following Material From The Existing Line And Then Stacking In The Respective Je’S ( Store ) As Per Direction Of Supervising Engineer. It Includes The Work Of Cartage, Cost Of Labour, T&P Carrier Etc. Required For Proper Completion Of Work. 46 Dismentling Of 160Kva Distribution Transformer 47 Dismentling Of 100Kva Distribution Transformer 48 Dismentling Of 250Kva Distribution Transformer.

INR 3540 /-

INR 70000.0 /-

INR 65 Lakhs /-