Military Engineer Services-MES has published Tender For Provision Of 30 Kva Diesel Gen Set At Fazilka Mil Stn Under Ge Abohar. Submission Date for this Tender is 11-05-2024. Diesel Generators Tenders in abohar Punjab. Bidders can get complete Tender details and download the document.
FileName | File Description | File Size |
d8c43b25-d9fe-4300-99d8-e7329e5600c2.html | Tender Notice | 0 KB |
BOQ_728287.xls | Tender Document | 0 KB |
Tenderdocus.pdf | Tender Document | 0 KB |
Tendernotice_1.pdf | Tender Document | 0 KB |
Sl. No. | Item Description |
1 | Supplying and installing ,commissioning and testing complete of manufacturer or OEM (Original equipment manufacturer) manufactured and tested static diesel Engine driven Generating set ,radiator cooled,with AMF panel capable of delivering 30 KVAor nearest higher rating 415 volts AC 3 phase 4 wire system of supply frequency 50 Hz .The DG set shall consist of diesel engine coupled through flexible copling to matching alternator and mounted on foundation pads on common base frame in the CPCB approved acoustic enclosure(the complete set cinfirming to and test certificate as per CPCB norms and as specified) with AMF control panel standardised by manufacturer instruction complete all as specified and as directed and comprising with the following :- |
2 | Engine (Prime mover) : Diesel Engine 1500 RPM of suitable HP as recommended by manufacturer but not less than 25.5 BHP (at rated RPM), water cooled, 2 cylinder, inline, 4 stroke, confirming to ISO 3046/BS 5514 with turbo charged air cooled, 1x88 AH 12 Volts batteries start, mechanical FIP, Electronic Governor, pulse turned exhaust manifold , stainless steel exhaust flexible connection complete with flywheel and all standard fittings/fixture as per manufacturing practice including suitable engine control panel with tachometer lu7b oil temp and pressure gauge, water temp starter, dynamo, fuel tank, fuel and lube oil filter, Dry type replaceable paper element air cleaner etc. |
3 | Alternator : AC alternator, Self excited, self-regulated, self-ventilated, brushless design, confirming to BS 2613/5000, 3 phase, 415 volts, 4 wire rated line current min 31 Amps output at PF 0.8, 1500 RPM, insulation class "H" enclosure IP 23 complete with AVR with -+ 1% voltage regulation, directly coupled to and matched with engine. |
4 | Anti Vibration pad for mounting engine alternator assembly on the base frame/plate. |
5 | Base frame/plate made out of structural steel as per manufacturer"s recommended design/specifications. |
6 | The contractor shall supply following maintenance spare part and tool kit for the generator set:- (i) Fuel filter-02 Nos (ii) Lube oil filter- 01 Bis (iii) Air Filter- 01 No (iv) V belt- 02 Sets (v) Tool kit socket set-01 No (vi) DE Spanner set-01 No (vii) Ring Spanner set - 01 No (viii) Clamp meter- 01 No |
7 | M&L for earthing complete with galvanised steel earth plate electrode 60cm X 60cm X 6mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level connected to galvanized strip 32 X 6mmby means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 of SSR Part-I connected to OH conductor on pole/ Panel/ main switch board etc all as specified or indicated and testing on completion including provision galvanized strip protected by 40 mm bore, light grade pipe and watering pipe shall be 20 mm bore medium grade GI pipe including excavation & earth work, PCC pit with RCC cover, charcoal, salt, funnel, GI strip and protection pipe upto 7.5 mtr complete all as specified and directed. |
8 | Supply and laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured , electric power cables1100 volts grade with stranded aluminium conductor of size50 sqmm 3.5 core complete all as specified and directed. |
9 | Supply and laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured , electric power cables1100 volts grade with stranded aluminium conductor of size35 sqmm 3.5 core complete all as specified and directed. |
10 | Excavation in trenches in any type of soilnot exceeding 1.5 mtr deep and notexceeding 1.5 mtrwide for laying of cables, RCC/Steel tubular poles/staysand struts etc getting outincluding trimmingsides and forming bottom surface all as specifiedand directedat site. |
11 | Removal of excavated surplus material to a distance n. exc. 50 mtr away in layer n. exc. 25cm from the starting point all as direcet by Engr-in-Charge. |
12 | Returning, filling in including spreading, leveling, watering and well ramming excavated soilin layers not exceeding 25 cm thick each, back in trenches after cables have been laid and tested, poles, stays , struts have been erected and tested , all as specified and directed at site |
13 | M & L for sand cushioning with dry and clean locally available sand for underground cable 8cm before laying cable and 15 cm after laying cable and punned to 18 cm after laying of cable complete all as specified and directed by Engineer-in-Charge Note: Pressed thickness shall be considered for payment purpose. |
14 | Supplying and laying un-reinforced precast concrete cable cover, class LV, type -I,flatpeak, size 250 mm x 150mm x 40mm complete all as directed by Engr - in charge |
15 | Supply and fix light grade 80mm GI pipe fix to Wall , Poles etc with suitable clamp for protection of cable complete all as directed |
16 | Supply and fix light grade 50mm GI pipe fixto Wall , Poles etc with suitable clamp for protection of cable complete all as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail