Military Engineer Services-MES has published Tender For Works Services For Connecting Sewage Output Of Trinity Officer Mess Into Central Sewage System Of Army And Provn Of Certain Sanctionedmaj Rev And Minor Wks At Chaf Bangalore. Submission Date for this Tender is 11-05-2024. Sewerage Construction Tenders in bangalore Karnataka. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| 1c6afb41-7c7c-46ac-b521-69fd4bd4df12.html | Tender Notice | 0 KB |
| BOQ_728262.xls | Tender Document | 0 KB |
| Tenderdocuments8198.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (reinforced) of any description and in any position not other wise specifically provided for and removing outside MD land complete all as specified and as directed by Engr-in-charge. |
| 2 | Demolition and breaking up of blocked, broken drain sewage pipe line (SGSW/ RCC pipes), including the pipe inserted in MH walls etc., and disposing the sludge, broken pipe and alike components out side MD land for undermentioned drain pipes complete all as specified and as directed by Engr-in-charge. |
| 3 | SGSW pipe 100mm bore |
| 4 | SGSW pipe 150mm bore |
| 5 | RCC NP-2 pipe 200mm bore |
| 6 | Excavation in trenches not exc 1.5m wide and not exc 1.5m deep for foundation etc not exc 10 sqm on plan and getting out in hard/dense soil complete all as specified and as directed by Engr-in-charge. |
| 7 | All as per item No.03 here-in-before but exc 1.5m but not exc 3.00m deep and getting out in hard/dense soil. |
| 8 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in soil complete all as specified and as directed by Engr-in-charge. |
| 9 | Removal of excavated material (soils) to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and as directed by Engr-in-charge. |
| 10 | Material and labour for concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested, plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregates) for following bore of pipes complete all as specified and as directed by Engr-in-charge. |
| 11 | DWC pipe 100mm bore |
| 12 | DWC pipe 150mm bore |
| 13 | DWC pipe 200mm bore |
| 14 | Material and labour for providing lowering, laying, aligning and fixing in position and joining at all level/depths full round HDPE DWC pipes (Double Wall corrugated) of 100mm dia bore with required jointing accessories of SN-8 grade as per IS-16098 (Part-2) amended upto date in trenches in complete including all material, labour, sectional hydrotesting (including the cost and conveyance of water to site for testing) and commissioning as per technical specifications complete all as specified and as directed by Engr-in-charge. |
| 15 | As per item No.08 here-in-before but 150mm bore. |
| 16 | As per item No.08 here-in-before but 200mm bore. |
| 17 | Material and labour for providing precast reinforced cement concrete type B1, 1:2:4 mix (using 20mm graded stone aggregate) in cover slabs with precast frames (for manholes etc), baffles walls and cover slabs to septic tanks and soakage wells etc. set in CM 1:4 including use and waste of necessary form work complete all as specified and as directed by Engr-in-charge. Note: Reinforcement will be measured and paid separately. |
| 18 | Demolition ofbrickwork or stone/boulder masanory, laid dry below or above ground level and removing material from site complete all as specified and as directed by Engr-in-charge. |
| 19 | Material and labour precast cement concrete block masonry with solid blocks, exc 10 cm in width built in, type C-1 (1:3:6) set in CM 1:6 complete all as specified and as directed by Engr-in-charge. |
| 20 | Material and labour for providing cement concrete type B1, 1:2:4 mix (Using 20mm graded stone aggregate) in coping including necessary use and waste of form work complete all as specified and as directed by Engr-in-charge. |
| 21 | Material and labour for PCC 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in foundation of manholes complete all as specified and as directed by Engr-in-charge. |
| 22 | Material and labour for extra for forming fair finished drain or channel or in man holes 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc., complete all as specified and as directed by Engr-in-charge. |
| 23 | Material and labour for TMT bars 10mm dia and over, cut to length,bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified and as directed by Engr-in-charge. |
| 24 | Material and labour for TMT bars 6-8mm dia and over, cut to length,bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified and as directed by Engr-in-charge. |
| 25 | Material and labour for rendering 15mm thick in CM 1:4 mixed with water proofing compound on new PCC block masonry surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge. Note: WPC will be measured and paid separately. |
| 26 | Taking down cement plaster from brick walls, concrete surfaces including raking out joints, hacking for keys, scrubbing down with water etc., complete all as specified and as directed by Engr-in-charge. |
| 27 | Material and labour for rendering 15mm thick on stone masonry surfaces in cement concrete 1:4 cement mortar and finished fair and smooth complete all as specified and as directed by Engr-in-charge. |
| 28 | Supply only inetergal water proofing compound. |
| 29 | Material and labour for cutting holes into or through stone walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required of superficial area exc 400 sqcm but not exc 0.10 Sqm complete all as specified and as directed by Engr-in-charge. |
| 30 | Demolition of cement concrete (unreinforced) in ground floor and pavings not exceeding 15cm thickness below or above ground level andremoving material from site of work complete all as specified and as directed by Engr-in-charge. |
| 31 | Material and labour for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base/mass concrete and finished the top surface even and fair complete all as specified and as directed by Engr-in-charge. |
| 32 | Material and labour for 75mm thick (compacted thickness) WBM, with coarse aggregates of grading 2 (63 to 40mm size) of flint or quartzite stone spread, watered, rolled with 8 to 10 tonne power rollerand consolidated to gradient and camber required complete all as specified and as directed by Engr-in-charge. |
| 33 | Material and labour for 300x300x25mm thick chequered cement concrete tiles rubberised moulded with grey cement and pigment set, jointed and pointed in neat cement slurry including laid over a screed bed of 20mm thick in CM 1:6 complete all as specified and as directed by Engr-in-charge. |
| 34 | Supply and fix for PCC coloured interlocking (glossy finishing) paver blocks with grey cement and no pigments confirming to IS-15658-2006 of 60mm thickness, M-35 grade as in hardstanding etc. laid over and including 50mm thick screed or bedding layer of sand complete all as specified and as directed by Engr-in-charge. |
| 35 | Material and labour for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc., and the like not exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and as directed by Engr-in-charge. |
| 36 | Material and labour for application of a layer of PATCHMATE PREMIX READY TO USE ALL WEATHER ROAD REPAIR MATERIAL over the prepared surfaces of WBM after damage of road. The application of PATCHMATE will be in following stages as per manufacturer"s instructions:- (a) Stage-I: Clean the surface using a broom/wire brush to ensure the area under repair is dust or soil free. (b) Stage-II: Use a shovel and a hard broom to remove all loose material and dust from the repair area. If the area of application /pot hole is deeper than around 40/ 50mm then the successive layer can be filled with 25/50 mm ballast. (c) Stage-III: Open the PATCHMATE bag material and lay evenly slightly CORN on the surface. Slightly tamp the surface. Traffic may be open for self leveling of the surface. |
| 37 | Excavating over areas, not exc 1.5m deep and getting out in any type of soil complete all as specified and as directed by Engr-in-charge. |
| 38 | Material and labour for formwork to sides flat rough finished of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed by Engr-in-charge. |
| 39 | Material and labour for formwork to sides of rough finished surface of square concrete columns complete all as specified and as directed by Engr-in-charge. |
| 40 | Material and labour for formwork to sides and soffits of rough finished surface of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc., also splays between floors and beams, etc., complete all as specified and as directed by Engr-in-charge. |
| 41 | Material and labour for formwork to soffits of rough finished surface of concrete suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed by Engr-in-charge. |
| 42 | Material and labour for formwork to rough finished surface of edges of concrete flat, treads, breaks in floors ,window cills concrete raillings opening in concrete walls floor and roofs n exc 20cm wide and sides of RCC /PCC bands in walls(Horizontal or sloping) and similar work exc 10cm but not exc 20cm wide complete all as specified and as directed by Engr-in-charge. |
| 43 | Material and labour for RCC (Nominal Mix) Type B1 1:2:4 (Using 20mm graded stone aggregate) for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed by Engr-in-charge. |
| 44 | Material and labour for RCC (Nominal Mix) Type B1 1:2:4 (Using 20mm graded stone aggregate) for RCC beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed by Engr-in-charge. |
| 45 | Material and labour for RCC (Nominal Mix) Type B1 1:2:4 (Using 20mm graded stone aggregate) for columns, pillars, piers, posts and struts complete all as specified and as directed by Engr-in-charge. |
| 46 | Material and labour for RCC (Nominal Mix) Type B1 1:2:4 (Using 20mm graded stone aggregate) for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by Engr-in-charge. |
| 47 | Material and labour for Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed by Engr-in-charge. |
| 48 | Material and labour for rendering 5 mm thick on fair faces of brick work or concrete ceiling surfaces in cement morter 1:3 finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge. |
| 49 | Material and labour for rendering 5 mm thick on fair faces of brick work or concrete wall surfaces in cement morter 1:3 finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge. |
| 50 | Removing excavated soils exceeding 1.5 Km but not exc 5 Km and depositing where directed complete all as specified and as directed by Engr-in-charge. |
| 51 | Material and labour for preparing new plastered or unplastered surface of walls and applying two coats of cement base paint on walls a coat of chalk primer through mechanical means complete all as specified and as directed by Engr-in-charge. |
| 52 | Material and labour for preparing new plastered on ceiling and applying three coats of white wash complete all as specified and as directed by Engr-in-charge. |
| 53 | Excavation in post holes each not exc 0.50 Cum in any type of soil, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cms, watering and removing surplus soil to a distance not exc 50m and making good surface complete all as specified and as directed by Engr-in-charge. |
| 54 | Supply and fix mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors, ladders; framed balusters; walk ways; railings; framework of watertanks and similar work confirming to Fe-290, Gde E-165 complete all as specified and as directed by Engr-in-charge. |
| 55 | Material and labour for preparation of untreated new steel surfaces of any description not exc 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of red oxide primer complete all as specified and as directed by Engr-in-charge. |
| 56 | Supply and fix for ball valves, 25mm dia bore high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed by Engr-in-charge. |
| 57 | Supply and fix for 5000 Ltrs capacity trible layered rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed by Engr-in-charge. |
| 58 | Supply and fix for 25mm bore steel tube medium grade galvanized with all fittings and connections complete all as specified and as directed by Engr-in-charge. |
| 59 | Supply and fix for 50mm bore steel tube medium grade galvanized with all fittingsand connections complete all as specified and as directed by Engr-in-charge. |
| 60 | Supply and fix for 25mm dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed by Engr-in-charge. |
| 61 | Supply and fix for 50mm dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed by Engr-in-charge. |
| 62 | Taking up or down 25mm bore steel tubing and connections including cleaningand refixing old steel tubing and connections in new or old position (wall, ceiling & floors etc.) complete all as specified and as directed by Engr-in-charge. |
| 63 | Taking up or down 50 mm bore steel tubing and connections including cleaningand refixing old steel tubing and connections in new or old position (wall, ceiling & floors etc.) complete all as specified and as directed by Engr-in-charge. |
| 64 | Surface excavation not exc 30 cms deep and averaging 15 cms deep and getting outhard/dense soil complete all as specified and as directed by Engr-in-charge. |
| 65 | Material and labour for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement morter 1:6 finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge. |
| 66 | Material and labour for rendering 10mm thick in cement morter 1:6 and5mm thick in cement morter 1:4 in two layers on fair faces of brick work or concrete surfaces with water proofing compound @ 200 ml per 50kg of cement or as per manufacturer"s instruction etc finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge. Note: WPC shall be measured and paid separetely. |
| 67 | Material and labour for 100mm thick hardcore of gauge not exc 63mm of broken stone, deposited, spread and levelled in layers not exc 15 cm thick, watered and rammed to a true surface complete all as specified and as directed by Engr-in-charge. |
| 68 | Material and labour for 100mm thick cement concrete type D2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring or pavings etc., complete all as specified and as directed by Engr-in-charge. |
| 69 | Material and labour for 75mm thick cement concrete type B2, 1:2:4 (using 40 mm graded stone aggregate) as in flooring or pavings etc., complete all as specified and as directed by Engr-in-charge. |
| 70 | Material and labour for coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658 -2006 of 60mm thick M-35 with grey cement and pigment complete all as specified and as directed by Engr-in-charge. |
| 71 | Material and labour for sand filling under floors or foundation, and receiving to interlocking tiles complete all as specified and as directed by Engr-in-charge. |
| 72 | Supply and fix mild steel rolled sections of FE410W (Gde E-250) quality "A" as in main and cross beams, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates etc complete all as specified and as directed by Engr-in-charge. |
| 73 | Supply and fix for pre-painted galvalume aluminium zinc coating GIbased corrugated steel sheet 0.50 mm th of ancolour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engr-in-charge. |
| 74 | Material and labour for cement concrete type C-2, 1:3:6 (Using 40mm graded stone aggregate) 75mm thick as in plinth protection, pavement etc and finished the surface even and fair complete all as specified and as directed by Engr-in-charge. |
| 75 | Material and labour for preparation of newly plastered surface of wall and apply three coats of white wash complete all as specified and as directed by Engr-in-charge. |
| 76 | Taking down cement plaster on brick or stone walls etc including racking out joints hacking for key, scrubbing down with water etc., complete all as specified and as directed by Engr-in-charge. |
| 77 | Taking down chowkhat or frames with shutters exc 1.5 sqm but not exc 4 sqm each (w/o taking of shutters from the frame) complete all as specified and as directed by Engr-in-charge. |
| 78 | Material and labour for 75mm thick cement concrete type D2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring or pavings etc., complete all as specified and as directed by Engr-in-charge. |
| 79 | Material and labour for 25mm thick PCC 1:2:4 type B1 (Using 20mm graded stone aggregate) as in sub base/levelling course complete all as specified and as directed by Engr-in-charge. |
| 80 | Material and labour for vitrified ceramic tiles 10mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm dark shade, in floors etc laid over and including 15mm thick screed bed or bedding layer of CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engr-in-charge. |
| 81 | Material and labour for vitrified ceramic tiles 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm dark shade laid over and including 10mm thick rendering in CM (1:3) on vertical surfaces such as skirtings, dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and as directed by Engr-in-charge. |
| 82 | Material and labour for providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (fixed portions) with extruded builtup standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and as directed by Engr-in-charge. Note: All the aluminium sections provided under this item shall be measured and converted into weight for payment with the designated unit weight mentioned in the manufactures catalouge for the corresponding aluminum sections/fittings. |
| 83 | Supply and fix for anodised aluminium door shutters (any type, normal or sliding), aluminium section powder coating (minimum thickness of powder coating 50 micron) weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc ., complete all as specified and as directed by Engr-in-charge. |
| 84 | Supply and fix for aluminium (extruded section) door closer hydraulically regulated, designation No. 3, universal type, suitablefor door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed by Engr-in-charge. |
| 85 | Supply and fix for 4mm thick aluminium composite panel to colour matchwith the aluminium partition/door andfixed in aluminium frame work fixed with necessary fixing arrangenments complete all as specified and as directed by Engr-in-charge. |
| 86 | Supply and fix for 5.5mm thick sheet glass, ordinary quality, fixied with necessary glazing clips, in squares exc0.5 sqm in each panel complete all as specified and as directed by Engr-in-charge. |
| 87 | Material and labour for coloured rubberised chequered cement concrete tiles of size 300X300X25mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed by Engr-in-charge. |
| 88 | Material and labour for preparing new plastered surfaces of wall and applying two coats of oil emulsion distemper through mechanical means over one coat of chalk whiting primer over and including 3mm thick wall care putty complete all as specified and as directed by Engr-in-charge. |
| 89 | Material and labour for complete removal of existing treatement on wall and applying two coats of oil emulsion distemper through mechanical means over one coat of chalk whiting primer over and including 2mm thick wall care putty complete all as specified and as directed by Engr-in-charge. |
| 90 | Removing building materials etc., to a distance of 30 KM beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and as directed by Engr-in-charge. |
| 91 | Material and labour for flame proof point wiring with PVC insulated 2.5 sqmm multistranded bunched copper conductor cable, FRLSH, 1100 volt grade drawn in and including surface mounted steel conduit stove enamelled, black steel conduit not less than less 20mm dia with, drawn on surface of wall of any type/ floors/ ceiling etc., and including flame proof bends and elbows, couplers, bell mouth reducer except junction box all as per relevant IS and type tested / approved by CMRI fixed with solid baked distance saddles and elevated MS spacer plate fixed with nettle fold Gl screws along with 2.5 sqmm PVC insulated solid strand copper conductor FRLSH 1100 Volt grade as earth continuity conductor, connected to common earth dolly complete all as specified and as directed by Engr-in-charge. One light point controlled by one rotary switch. |
| 92 | Supply and fix for switch flame proof rotary type with termination box in LM6, 16A, single pole 250 Volts complete all as specified and as directed by Engr-in-charge. |
| 93 | Supply and fix for 2x16 watts LED light fitting, flameproof, CMRI certified for gas/ vapour group, with IP 65 protection, with die cast aluminium housing heat resiistant toughend glass with LED tube light fixtures driver, holders, connectors etc., complete all as specified and as directed by Engr-in-charge. |
| 94 | Supply and fix for sheet metal enclosure for DB"s double door SPN, 2 ways when MCBs to be used single pole and neutral, deep drawn with 200 Amps rated copper bus bar 240V including taking down old unserviceable from exiting place complete all as specified and as directed by Engr-in-charge. |
| 95 | Supply and fix for MCB SPN, 32 Amps, 240V, C- series with breaking capacity of 10KA complete all as specified and as directed by Engr-in-charge. |
| 96 | Supply and fix for sub main wiring with two single core FRLS PVC insulated cable with copper conductor multistranded 1100 volts grade 6 sqmm drawn in and including non-metallic rigid PVC conduit and accessories and fixing arrangements fixed to surface on walls of any type, floor or ceiling etc by cutting chases in existing stone/ brick masonary including 6 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and as directed by Engr-in-charge. Note: One run of earth continuity conductor, one run of PVC Conduit and two run of copper conductor together taken as one length for measuring unit length. |
| 97 | Material and labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25mtrs deep below ground level) with top edge of the plate not less than 1.5mtrs below normal ground level, connected to galvanised earth lead wire 4.00 mm diaas earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point or indiacted including testing on completion complete all as specified and as directed by Engr-in-charge. |
| 98 | Material and labour for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed for earthing etc., of size 4.00 mm dia galvanised iron or steel wire complete all as specified and as directed by Engr-in-charge. |
| 99 | Material and labour for point wiring with cable of PVC insulated FRLS copper multistranded conductor 1.5 sqmm 1100 volts grade in and including PVC casing and caping ISI marked with all accessories and fixing on stone walls / brick masonary walls /ceilings / floors etc on existing stone/ brick masonary,including fixing top cover /PVC /MS Modular type junction boxes concealed on Stone walls / brick masonary walls for housing switches/sockets/ regulators etc. with and including 1.5 sqmm PVC insulated multistranded copper earth continuity conductor connecting to the common earth dolly etc complete for the following all as specifiedand as directed by Engr-in-charge:- |
| 100 | One Exhaust fan point controlled by one single pole 5 Amps switch |
| 101 | One 3 pin switch socket out let point 5 Amps switch on independent board |
| 102 | Supply and fix for wall mounted fan, 400mm sweep, 2050 RPM, Air delivery 90 CMM, with complete acessories complete all as specified and as directed by Engr-in-charge. |
| 103 | Supply and fix for modular switch, 1 module single pole one way 10 Amps complete all as specified and as directed by Engr-in-charge. |
| 104 | Supply and fix for modular socket, 2 module 6 Amps, 2/3 pin, 240 volts AC 2/3 pin combined complete all as specified and as directed by Engr-in-charge. |
| 105 | Supply and fix for modular white cover plate with frame, 3 module complete all as specified and as directed by Engr-in-charge. |
| 106 | Supply and fix for metal flush box 3 module complete all as specified and as directed by Engr-in-charge. |
| 107 | Point wiring with cable of PVC insulated FRLS copper multistranded conductor 2.50 sqmm 1100 volts grade in and includingmedium grade 20 mm dia PVC Conduit Pipe ISI marked with all accessories and fixing arrangement on Stone walls / brick masonary walls /ceilings / floors etc.including fixing top cover /PVC /MS Modular type junction boxes fixing on Stone walls / brick masonary walls for housing switches/sockets/ regulators etc. with and including 2.50 sqmm PVC insulated multistranded copper earth continuity conductor connecting to the common earth dolly etc complete all as specified and as directed by Engr-in-charge. |
| 108 | Supply and fix Modular switch , 1 Module single pole one way16 Amps complete all as specified and as directed by Engr-in-charge. |
| 109 | Supply and fix modular socket , 2 Module6/16Amps, 2/3 pin, 240 volts Ac 2/3 pin combined complete all as specified and as directed by Engr-in-charge. |
| 110 | Supply and fixing PVC ceiling rose 65 x 50 mm surface type with 3 terminalscomplete all as specified and as directed by Engr-in-charge. |
| 111 | Supply & fix Metal body Exhaust fans AC single phase 230 V of size 380 mm sweep , 900 RPM,with louvers complete all as specified and as directed by Engr-in-charge. |
| 112 | Supply & fix Wall mounted fans AC single phase 230 V of size 400mm sweep , 2050 RPM,complete all as specified and as directed by Engr-in-charge. Make : BAJAJ, Model : NEO SPECTRUM, Code no : 250890 or equivalent make in HAVELLS/ CG/ WIPRO |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
