Military Engineer Services-MES has published Tender For Provision Of Toilets And Bathroom Complex Alongwith Allied Infra For Inf Bn At Niru Under Ge 874 Ews. Submission Date for this Tender is 20-05-2024. Toilet Bathroom Tenders in Baramulla Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 01-May-2024 | Corrigendum | Other | 20-05-2024 |
| FileName | File Description | File Size |
| c72842c4-2dfd-4d76-817e-39a2e9c13959.html | Tender Notice | 0 KB |
| BOQ_728255.xls | Tender Document | 0 KB |
| Tender16.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Earth work excavation in trenches n.exc 1.5m wide & 1.5m depth and getting out in any type of soil complete all as specified and directed by Engr-in-Charge. |
| 2 | M&L for providing cement concrete 1:4:8 type D2 (Using 40mm graded stone agg) in foundation, mass concrete and filiingscomplete all as specified and directed by Engr-in-Charge. |
| 3 | S&F for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed by Engr-in-Charge. |
| 4 | M&L Form work to side of concrete in fdns, footing base, base of columns, side and soffits of plinth beam and simillar work complete all as specified and directed by Engr-in-Charge. |
| 5 | M&L Form work to side of columns and simillar work complete all as specified and directed by Engr-in-Charge. |
| 6 | M&L for providing reinforcement cement concrete M-25 (Design Mix) as in footing, foundation,beams, plinth beams, base for columns and mass concreteetc complete all as specified and directed by Engr-in-Charge. |
| 7 | M&L for providing reinforcement cement concrete M-25 (Design Mix) as in Beams, cantilevers, ressummers, lintels over 1.5m span concreteetc complete all as specified and directed by Engr-in-Charge. |
| 8 | M&L for providing reinforcement cement concrete M-25 (Design Mix) as in columns and pillars etc complete all as specified and directed by Engr-in-Charge. |
| 9 | Mild steel TMT bars 10mm dia and over as in reinforcement, cut to length bent to shape required, binding with and including MS annealed wire of dia not less than 0.90 mm complete all as specified and directed by Engr-in-Charge. |
| 10 | All as per item No 09 above but 6mm to 8mm dia bars as in stirrups/ spacers vcomplete all as specified and directed by Engr-in-Charge. |
| 11 | M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in CM 1:4. complete all as specified and directed by Engr-in-Charge. |
| 12 | M&L for brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brickwalls in built in CM 1:4 etc complete all as specified and directed by Engr-in-Charge. |
| 13 | Returning filling in including spreading leveling watering & well ramming in layers n.exc 25cm thick complete all as specified and directed by Engr-in-Charge. |
| 14 | Removing excavated materials to be a distancen.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed by Engr-in-Charge. |
| 15 | M&L for Rendering 15mm thick in cement mortar 1:4 onfair face of brickwork or concrete surfaces,stone masonry surface, finished even and smooth without using extra cement, complete all as specified and directed by Engr-in-Charge. |
| 16 | M&L Rendring 15mm thick CM 1:6 as in internal plastering to fair faces of brick masonry walls or concrete surfaces and finishing even & smooth etc complete all as specified and directed by Engr-in-Charge. |
| 17 | M&L for Preparation ofnew plastered surfaces and applying three coats of white wash/colour wash on walls complete all as specified and directed by Engr-in-Charge. |
| 18 | M&L for preparation ofnew plastered surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and directed by Engr-in-Charge. |
| 19 | S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment etc complete all as specifiedand directed. |
| 20 | S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed by Engr-in-Charge. |
| 21 | S&F Mild Steel Work as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed by Engr-in-Charge. |
| 22 | M&L MS screw bolt diameter of shank 11 to 15mm (machine made) with hexagonal head at one end screwed the other or screwed both ends, each screw end fitted with washers and one hexagonal nut exc 5cm but n.exc 10cm complete all as specified and as directed by Engr-in-Charge |
| 23 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as complete all as specified and directed by Engr-in-Charge.. |
| 24 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as complete all as specified and directed by Engr-in-Charge. |
| 25 | M&L for sand filling under floor or in foundation including watering and consolidation etccomplete all as specified and directed by Engr-in-Charge.. |
| 26 | M&L hardcore of gauge n.exc. 63mm deposited, spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface for plinth protection/path etc complete all as specified and directed by Engr-in-Charge. |
| 27 | M&L 100mm thick PCC 1:4:8 type D2 (40mm graded aggregate) for floor sub base complete all as specified and directed by Engr-in-Charge. |
| 28 | M&L providing 25mm thick cement concrete 1:2:4 type B1 (Using 20mm graded stone agg) ,asin sub base in floor/paving etc complete all as specified and directed by Engr-in-Charge. |
| 29 | M&L Non skid ceramic coloured tiles 7-8 mm thick,area exc 0.11 sqm but n.exc 0.18 sqm of each tile in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to matchthe colour oftile on 15mm thick screed bed in CM 1:4 over 25mm thick PCC 1:2:4 type B0 (using 12.50mm graded crushed stone agg) complete all as specified and directed by Engr-in-Charge. |
| 30 | M&L 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as specified and directed. |
| 31 | M&L for coloured glazed ceramic tiles as in skirting/ dado (350x250 or 450x350) x 7mm thick, set and jointed in neat cement slurry and pointed in coloured cement to match colour of the tile over backing coat/screed bed 10mm thick inCM1:4 on fair faces of brick/stonewall surffaces for laying dado/skirting complete all as specified and directed by Engr-in-Charge. |
| 32 | S&F factory made solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed by Engr-in-Charge. |
| 33 | S & FFactory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & Bottom rails. MS frames shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plaincolour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed by Engr-in-Charge. |
| 34 | S&F 75 mm size mild steel butt hingesmedium weight complete all as specified and directed by Engr-in-Charge. |
| 35 | S&F 100 mm long aluminium anodised barrel tower bolt of exturded section complete all as specified and directed by Engr-in-Charge. |
| 36 | S&F 100 mm long aluminium handles cast type anodised complete all as specified and directed by Engr-in-Charge. |
| 37 | S&F 300mm long aluminium alloy, anodised sliding door bolt, with hasp and staple (bolt type) cast or extruded section and fixing bolts of extruded section complete all as specified and directed by Engr-in-Charge. |
| 38 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 39 | S&F Vitreous China Wash down water closetpan (Pedestal pattern), white incl plastic water closetseat and cover closed pattern with flat bottom and mild steel chromium plated or aluminised hingingdevice & incl P or S trap and connection totrap andto theflushing system anti syphonage pipe etc(excluding flushing cistern and flush pipe) complete all as specified and directed by Engr-in-Charge. |
| 40 | S&F vitreous china squatting pan "Orissa" pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing system anti syphonage pipe etc complete all as specified and as directed. |
| 41 | S & F Vitreous China Urinal, Half stall type, white with grating and union for discharge pipe including providing and fixing plugs with and including 60mm long brass screws, pointing around urinal back in cement with PVC 32mm dia waste pipe & waste coupling incl spreader complete all as specified and directed by Engr-in-Charge. |
| 42 | S&F Vitreous china urinal partition white of size 310x700 mm including all fitting accessory complete all as specified and directed by Engr-in-Charge. |
| 43 | S&F PVC valveless,syphonic action type, low level PVC flushing cistren 10 ltr capwhite with flush pipe & all fittingcomplete all as specified. |
| 44 | S&F Wash basins, Vitreous China (flat back or angle back type) size 550x400mm, fix in on granite platform or on top including cutting for and pinning in ends of brackets or erecting stand, including brass CP bottle trap but exclusive of fixing of supply and waste pipe |
| 45 | S&F Granite (of any type) work (table rubbed and polished) size of 20mmand like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding off edges including cutting hole for wash basin fixing as per reqrd size completed as specified and directed |
| 46 | S&F 600 x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plug with chromium plated brass screws and cup washers complete all as specified and directed by Engr-in-Charge. |
| 47 | S&F Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed by Engr-in-Charge. |
| 48 | S&F Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws |
| 49 | S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed by Engr-in-Charge. |
| 50 | S&F Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed by Engr-in-Charge. |
| 51 | S&F Aluminium powder coated (thickness of powder coating not less than 50 micron) as in ventilators half fixed with 4mm glass and half louvers with clipsof 4mm glass 100mm widetype of frame size 104mmX45.60mm thickness 3 mm, weight per kg /mtr 1.705 and one mosquito proof shutter frame size 44.50mmX25mm thickness1.40mm and weightr kg/mtr 0.560.single leafcut to size, jointed galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm together with cadium plated steel screwes including rubber packing aluminium beading or gasket for aluminium section for fixing of 4 mm pin headed glass sheet and wire cloth necessary fittings complete screwews plugs complete all as specified and directed by Engr-in-Charge.Note : Aluminium frame ,shutter ,glass,wire cloth ,louvered and accessories are included in above description. |
| 52 | M&L for galvanised steel tubes medium grade 15 mm dia fixed to wall or ceiling or laid under floor, complete with necessary fittings complete all as specified and directed by Engr-in-Charge. |
| 53 | M&L for galvanised steel tubes medium grade 20 mm dia fixed to wall or ceiling or laid under floor, complete with necessary fittingscomplete all as specified and directed by Engr-in-Charge. |
| 54 | S & F 15mm bore Stop/Angle valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-Charge. |
| 55 | S & F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engr-in-Charge. |
| 56 | S & F 15mm bore concealed stop valve fancy type chromium plated with long shank, cast copper alloy, screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe complete all as specified and directed by Engr-in-Charge.. |
| 57 | S & F 15mm bore bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engr-in-Charge. |
| 58 | S & F PVC connection 15mm dia with PTMT nuts of length 450mm complete all as specified and directed by Engr-in-Charge. |
| 59 | S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge. |
| 60 | S & F 125mm brass chromium plated shower rose size complete all as specifiedand directed by Engr-in-Charge. |
| 61 | S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engr-in-Charge. |
| 62 | S&F 110mm diaPVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engr-in-Charge. |
| 63 | S&F 75mm diaPVC (SWR) pipes single socketed, in any length fixed to floors or in trenches complete all as specified and directed by Engr-in-Charge. |
| 64 | S&F PVC (SWR) bends any radius, 110mm bore, fitted with oval access door complete all as specified and directed by Engr-in-Charge. |
| 65 | S & F bend suitable for 110mm dia PVC (SWR) pipe complete all as specified and directed by Engr-in-Charge. |
| 66 | S&F PVC (SWR) bends any radius, 75mm bore, fitted with oval access door complete all as specified and directed by Engr-in-Charge. |
| 67 | S&F PVC (SWR) reducers any radius 110mm bore |
| 68 | S&F PVC (SWR) Single door "T" 110mm mm bore equal or unequal type- B complete all as specified and directed by Engr-in-Charge. |
| 69 | S&F PVC (SWR) Single door"T" 75 mm mm bore equal or unequal type- B complete all as specified and directed by Engr-in-Charge. |
| 70 | PVC (SWR) vent cowl 75mm dia complete all as specified and directed by Engr-in-Charge. |
| 71 | S&F PVC (SWR) floor trap,75mm plain with grating including jointing with solvent cement complete all as specified and directed by Engr-in-Charge. |
| 72 | S&F PVC (SWR) floor trap,100mm plain with grating including jointing with solvent cement complete all as specified and directed by Engr-in-Charge. |
| 73 | Stack clamps for100mm dia pipe made out of 50mm x 5mm flat iron & 16mm dia round iron stays, incl nuts & bolts & securing ends of stays to wall & roof complete all as specified and directed by Engr-in-Charge. |
| 74 | M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed by Engr-in-Charge. |
| 75 | M&L for E-board ceiling 6mm thick pre-coated non asbestos E board classic designer tiles of size 595 x 605mm manufactured by Everest Eternite Ltd. Fixed in GI snap grid inter locking system powder coated at bottom of same manufacturers including GI wire as per manufacturer specifications. if pre coating is spoiled by worker while fixing of tiles the complete tile surface shall be provided with 2 coats of plastic emulsion paint without any price adjustment complete all as specified and directed by Engr-in-Charge. |
| 76 | M&L preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide/zinc chrome primer complete all as specified and directed by Engr-in-Charge. |
| 77 | Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified and directed by Engr-in-Charge. |
| 78 | Excavating over areas, n exc 1.5 m deep and getting out in any type of Soil complete all as specified and directed by Engr-in-Charge. |
| 79 | M&L of Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5m high from base complete all as specified and as directed by Engr-in-Charge. |
| 80 | walling of random rubble stone masonry built in Cement mortar 1:6 uncoursed, well bonded, bedded and solidly hearted and pointing surface in contact with earth in the same mortar, including providing weep holesas the work proceeds complete all as specified and directed by Engr-in-Charge. |
| 81 | Plain cement concrete (1:2:4), type B-1 (using 20 mm graded crushed stone aggregate) as in benching, bed plates coping and the like including necessary formwork weathering, slightly rounded or chamfered angle and fiishing all exposed surface of concrete, complete all as specified and directed by Engr-in-Charge. |
| 82 | M&L for extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surface not exceeding 20 mm to face stones (lime and sand stone ) and dressing of face beds and joints, asspecified of random rubble walling, uncoursed or brought upto course complete all as specified and directed by Engr-in-Charge. |
| 83 | M&L for boulder filling dry, hand packed tighly as in vertical bunds with sloping faces complete all as specified and directed by Engr-in-Charge. |
| 84 | M&L for keyed pointing to random or polygonal rubble stone masonary, uncoursed or brought upto course in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge. |
| 85 | Precast cement concrete (1:3:6) type C-1 (using 20 mm graded stone aggregate) set in Cement Mortar 1:4 as in bond stone walling, complete all as specified and directed by Engr-in-Charge. |
| 86 | Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil for roads to required slope gradient, camber etc complete all as specified and directed by Engr-in-Charge. |
| 87 | M&L 75mm thick cement concrete as in sub base type C2, 1:3:6 ( 40 mm gde stone aggregate) as in sub base complete all as specified and directed by Engr-in-Charge. |
| 88 | M&L 60mm thick, machine pressed precast concrete interlocking paver block, with grey cement and pigment,any shape and size confirming to IS 15658-2006, M-35 Grade complete all as specified and directed by Engr-in-Charge. |
| 89 | M&L for 25 mm sand cushion under paving block including watering and consolidation for interlockingtiles complete all as specified and directed by Engr-in-Charge. |
| 90 | Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills,steps,and other similar bands,plinth courses, string courses, lacing courses, parapets and railing upto 60cm height,copings,kneelers,apex stone,bed plates and the like including weathering slightly rounded or chamfered angles and throating, complete all as specified and directed by Engr-in-Charge. |
| 91 | Excavation in trenches n.exc 1.5m wide andn.exc 1.5m deep in any type of soil and getting out soft/loose soil complete all as specified and directed by Engr-in-Charge. |
| 92 | M&L for plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) in foundation of stay assembly etc including necessary form work, complete all as specified and directed by Engr-in-Charge. |
| 93 | M&L of Walling of random rubble masonry uncoursed, well bonded , bedded and solidly hearted built in CM 1:4 complete all as specified and directed by Engr-in-Charge. |
| 94 | Extra over stone walling for hammer dressing to face of stones and dressing of face beds and joints, as specified of random rubble walling uncoursed or brought upto courses with maximum depression on face from stragith edge held against the dressed surface n exc 20 mm on granite or trap stone complete all as specified and directed by Engr-in-Charge. |
| 95 | Extra for forming fair finished drain or channel 30cm inner girth in cement cocrete using extra cement including forms moulds, mitred /stopped ends etc complete all as specified and directed by Engr-in-Charge. |
| 96 | On site LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete for 25 users complete all as specified and directed by Engr-in-Charge. |
| 97 | Construction of soakage well of 1.8m internal dia and 3.00m deep below inlet level including excavation in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes 150mm bore of RCC/DWC/SWG complete filled with brick bats of size 40 to 80mm,including all other relevant works, complete, all as specified and shown on drawing No.CESZ/TD-1104/2015 complete all as specified and directed by Engr-in-Charge. |
| 98 | M&L Reinforced concrete pipes, 150mm bore, class NP2, laid and jointed complete all as specified and directed by Engr-in-Charge. |
| 99 | M&L Reinforced concrete pipes, 200mm bore, class NP2, laid and jointed complete all as specified and directed by Engr-in-Charge. |
| 100 | M&L Concrete bed to drain 150mm bore of pipes with cement concrete 1:3:6 type C-2, including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed by Engr-in-Charge.. |
| 101 | M&L Concrete bed to drain 200mm bore of pipeswith cement concrete1:3:6 type C-2, including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed by Engr-in-Charge. |
| 102 | Supply only liquid water proofing compound complete all as specified and directed by Engr-in-Charge. |
| 103 | M&L precast RCC (1:2:4), Type B-1, (using 20 mm graded agg ) set in cement mortar 1:4 as in manhole covers slab including necessary formwork required complete all as specified and directed by Engr-in-Charge complete all as specified and directed by Engr-in-Charge. |
| 104 | M&L for cement concrete type C2 (1:3:6) using 40mm graded aggregates in surface channels and manholes complete all as specified and directed by Engr-in-Charge. |
| 105 | Point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi stranded flexible cable (green color) as earth lead in and including cable 1100 volts grade including conduit/casing and capping (ISI marked) for one light/ fan point including 2nd class hard wood rectangular block open recessed cover with 3mm thick plastic laminated sheet cover including cutting chases to wall making good the disturbed surfaces to match with theexisting specification complete all as specified and directed by Engr-in-Charge. |
| 106 | All as per item No 105 herein before but wiring with 1.5 sqmm copper wire ( FRLS)and 1.5 sqmm earth wire for switch socketcombination 3 pin 5 amps on independent board complete all as specified and directed by Engr-in-Charge. |
| 107 | All as per item No 105 herein before but wiring with 2.5 sqmm copper wire ( FRLS)and 1.5 sqmm earth wire for switch socket combination 6 pin 15 amps on independent board complete all as specified and directed by Engr-in-Charge. |
| 108 | S&Fswitch piano flush button single pole, one way 5 amps complete all as specified and directed by Engr-in-Charge. |
| 109 | S & F switchsocket combination 5 pin 16A, flush type complete all as specified and directed by Engr-in-Charge. |
| 110 | S & F switchsocket combination 3 pin 5A, flush type complete all as specified and directed by Engr-in-Charge. |
| 111 | S&F sheet metal enclosure for DBs (Double door type) when MCBs to be used single pole and neutral8 way incl blanking plate as reqd with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed by Engr-in-Charge. |
| 112 | S&F MCB"s single pole 240 volts 6 to 32Amps 10 KA "C"series, complete all as specified and directed by Engr-in-Charge. |
| 113 | S & F of MCB SPN, 240volt, 40 to 63 Amp capacity, 10 KA, "C" curve complete all as specified and directed by Engr-in-Charge. |
| 114 | S&F LED, 20 Watts, 4 ft, fittings complete with all accesories for mounting light fittings complete with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body complete all as specified and directed by Engr-in-Charge. |
| 115 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge. |
| 116 | Supply and fix ceiling rose with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body complete all as specified and directed by Engr-in-Charge. |
| 117 | M & L Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and directed by Engr-in-Charge. |
| 118 | Supply and fix LED Bulb 9 Watt complete all as specified and directed by Engr-in-Charge. |
| 119 | Earthing complete with galvanised steel earth plate electrode 60x60cmx6.3 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level)with top edge lead of the platenot less than 1.5 mtr below normal ground level, connected galvanised earrth lead wire 4.0mm dia by means of bolts, nuts,check nuts and washers of galvanised iron or steel all as shoen in Electrical plate No 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed by Engr-in-Charge. |
| 120 | S&F 09W/10W Bulk head liminiares including LED light driver holder connectingup with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge. |
| 121 | S&F Exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230v , 50HZ , RPM 1200, Copper winding of sweep 300mm, with 2 years warrenty complete all as specified and directed by Engr-in-Charge. |
| 122 | Supply and Fixing 1100 Volts grade heavy duty cable PVC insulated multistranded aluminium conductor served with PVC tape and overall PVC sheathed in services connections suspended by insulating hanger not more than 1 mtr apart including 4mm dia GI suspension wire one twin core cable flat or circular of size16 Sqmm 2 core complete all as specified and directed by Engr-in-Charge. |
| 123 | Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed as required in PVC casing caping of size 2x2.5 sq. mm + 1x1.5 sq. mm earth wire complete all as specified and directed by Engr-in-Charge. |
| 124 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed by Engr-in-Charge. |
| 125 | Supply, Laying , jointing and testing LT underground cable, heavy duty, 1100 Volts, XLPE insulated and sheathed, armoured with multi-stranded aluminium conductor cable , laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts duly encased in galvanised steel pipe of suitable sizes including cable gland of suitable sizesand aluminium lugs for connection complete all as specified and directed of following sizes:-Make: Havells,Polycab or equivalent make as approved by GE |
| 126 | (a)10 sqmm2.0 core |
| 127 | (b)25 sqmm3.5 core |
| 128 | Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m depth for foundation ,laying of cables/pipes/poles etc., and getting out in hard/densesoil complete all as specified and directed by Engr-in-Charge. |
| 129 | All as per item No 127 abovebut Exc 1.50 but n.exc 3.0m deep complete all as specified and directed by Engr-in-Charge. |
| 130 | Supply and laying dry river sand for cable cushioning in trenches to required width at bottom and top of cable including spreading levelling watering and consolidation complete all as specified and directed by Engr-in-Charge. Note:-Punned thickness only shall be measured and paid. |
| 131 | Supply and laying old size brick covering with width equal to length of brick as the mechanical protection to cable with well burnt sub class "B" laid in trenches flat complete all as specified and directed by Engineer-in-charge. |
| 132 | S&F in repair/ replacement for HT VCB 11 KV, AC 3 phase, 50 HZ indoor type for following items complete all as specified and directed. |
| 133 | (a)40 mm bore |
| 134 | (b)50 mm bore |
| 135 | Taking out old unserviceable Lt Panel of any size and capacity,Supply, install, testing and commissioning of Bus bar chamber of size 60 cm x 60cm x 40 cm outdoor type suitable for LT 415 volts 3 phase 4 wire system factory made cubical complete materialised dust and vermin proof (protection class IP 54), made out of 3.15mm thick MS sheet (CRCA) including factory made hinged type door both side opening with locking arrangement duly painted with two coats of synthetic enamel paint with powder coated finish over a coat of zinc chrome primercompleteall as specified and directed by Engineer-In-Charge. the panel board shall be comprising of the following accessories :-(a) Copper bus barcap 200 Amp-04 Nos (b)MCCB four pole with thermal magnetic release adjustable type with breaking capacity 16 KA,25 Amp- 01 No (c)Digital Voltmeter-96 x 96 mm flushsecure Panel mounting type 0-500V with selector switch- 01 No (d) Digital Amp meter96 mm X 96 mm flush secure Panel mounting type 0-100 Amps with selector switchwith CT - 01 No (e) RYB neonindicatinglamp setof three- 01 Notes: (i) Rates are deemed to be inclusive of PCC platform of suitable size and 45cm height and 4 Nos legs of 50mmx50mmx6mm and 60 cm in height for fixing the panel (iii) Make of MCCB-AS per Appx"B" (iv) Make of LT Panel/Bus Bar chamber:-AS per Appx "B" of the BoQ Danger notice board (02 Nos)in Hindi and English ofsize 20cmx 15cm shall be fixed on the panel |
| 136 | M & L for Earthing complete with galvanised steel earth plate electrode of size 60×60cm×6mm thick surrounded by mixture of charcoal and salt in alternate layers, buried directly in ground vertically in a pit of depth not less than 2.25 metres deep below ground level with top edge of the plate not less"than 1.5 metres below normal ground level, connected to equipment by using GI strips of size 32 x 6mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron all as shown in electrical plate No.5 of MES schedule and connected to earthing test point all as specified and directed including earth pit of size 30cm x 30cm x 45 cm made of PCC 1:3:6 and PCC 1:2:4 cover, funnel, GI Tubing etc & testing on completion all as specified. Note :- The unit rate includes the cost of excavation & earth work in any type of soil, charcoal and salt in alternate layers, 20mm bore GI Pipe (med grade) for watering 40mm GI protection pipe (light grade)funnel, wire mesh,lugs, PCC 1:2:4 type B1 chamber in cement concrete 50mm thick precast RCC M-25 (design mix) cover duly reinforced with XPM (weight not less than 3kg/sqm) and CI frame etc and including provision of test point, connecting to test point and testing on completion etc complete all as specified. The unit rate also include earthing lead and protection pipe upto 7.5mtr from top of earth plate complete all as specified and directed by Engr-in-Charge. |
| 137 | S&F 5000 ltrs capacity rotational moulded polyethylene water storage tank triple layered, ISI engraved (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I, the Tanks shall be interconnected to each other by means of 25mm GI pipes at base level complete all as specified and directed by Engr-in-Charge. (The staging and GI pipe for the tank shall be measured and paid seperately under respective items of schedule here in after) |
| 138 | Walling of random rubble stone masonry, uncoarsed, well bonded, bedded and solidly hearted built in cement mortar 1:4, complete all as specified and directed by Engr-in-Charge. |
| 139 | Walling of random rubble stone masonry, uncoarsed, well bonded, bedded and solidly hearted laid dry, complete all as specified and directed by Engr-in-Charge. |
| 140 | Cutting,threading and joining of existing GI pipe line upto 80 mm dia and inserting suitable tee for taking branch connection complete all as specified and directed by Engr-in-Charge. |
| 141 | Supply and laid in trenches pipe galvanized 20 mm dia medium grade complete incl fitting such as bends, elbows, tees, short pieces, connectors, back nuts, caps, plugs and unions etc complete all as specified and directed by Engr-in-Charge. |
| 142 | Supply and laid in trenches pipe galvanized 25 mm dia medium grade complete incl fitting such as bends, elbows, tees, short pieces, connectors, back nuts, caps, plugs and unions etc complete all as specified and directed by Engr-in-Charge. |
| 143 | Supply and laid in trenches pipe galvanized 40 mm dia medium grade complete incl fitting such as bends, elbows, tees, short pieces, connectors, back nuts, caps, plugs and unions etc complete all as specified and directed by Engr-in-Charge. |
| 144 | Supply andfixing 20 mm gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe suitable for 20 mm dia pipe complete all as specified and directed by Engr-in-Charge. |
| 145 | Supply andfixing 25 mm gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe suitable for 25 mm dia pipe complete all as specified and directed by Engr-in-Charge. |
| 146 | Supply and fixing 15mm Ball valves high pressure of PTMTwith epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge. |
| 147 | Construction of RR masonary staging for over head tank 2.4mtr from ground level PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete and brick work with sub class "B" bricks straight or curved on plan exc 6m mean radius in CM 1:4 with plastering and rendering 15 mm thick on fair faces of brick work or concrete surface in CM 1:4 including applying three coat of white wash includingpreparation of new surface of wall complete all as specified and directed by Engr-in-Charge. |
| 148 | Supplying, Hoisting and Fixing of Rotational moulded polyethylene water storage tank of capacity of 1000 litres (cuboidal or cylindrical as approved by Engineer-In-Charge) vertical with closed top), for hoisting into position either inside or outside of building, connecting up pipes, securing access covers etc., with monkey-proofing mechanism, hoisted and fixed in position complete all as specified and directed by Engr-in-Charge. |
| 149 | Supply and Fixing, Single Phase, self priming electric motor water pump, with separate starter, self priming type, with 25 meter head, 1 HP (or any other higher capacity as required), for pumping hot/cold water, complete with all plumbing and electrical fittings, complete all as specified and directed by Engr-in-Charge.Make : Kirloskar, Crompton Greaves, Crompton or equivalent from the list of approved brands in MES. |
| 150 | Supply and install auto switch on and Switch off mechanism for above motor pump , IP67 rated, with all necessary electrical, electronic and mechanical fittings, complete all as specified and directed by Engr-in-Charge. |
| 151 | Lagging to pipes 20mmbore used in internal water supply or plumbing all round with 25mm thick bonded mineral wool preformed "SNAP ON" pipe sections of density 144Kg/Cum conforming to IS-9842 provided with chicken mesh wire netting 25 gauge, 20mm mesh and coveredwith 0.01mm aluminium foil, complete all as specified and directed by Engr-in-Charge. |
| 152 | Lagging to pipes 25mmbore used in internal water supply or plumbing all round with 25mm thick bonded mineral wool preformed "SNAP ON" pipe sections of density 144Kg/Cum conforming to IS-9842 provided with chicken mesh wire netting 25 gauge, 20mm mesh and coveredwith 0.01mm aluminium foil, complete all as specified and directed by Engr-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
