Military Engineer Services-MES has published Tender For Provision Of Security Infra For Tech And Adm Area Of 619 Eme Bn At Baramulla Grn Under Ge 969 Ews. Submission Date for this Tender is 20-05-2024. Civil Work Tenders in Baramulla Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 22-Apr-2024 | Corrigendum | Other | 20-05-2024 |
| 2 | 01-May-2024 | Other | Other | 20-05-2024 |
| FileName | File Description | File Size |
| 2569a6c6-19a7-4f0d-972b-3074144dca71.html | Tender Notice | 0 KB |
| BOQ_728254.xls | Tender Document | 0 KB |
| Tender14.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Excavating over areas, n exc 1.5 m deep and getting out in hard/dense soil complete all as specified and directed by Engr-in-Charge |
| 2 | Removing excavated material n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge |
| 3 | Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out hard and dense soil complete all as specified and directed by Engr-in-Charge |
| 4 | Excavation in trenches in any type of soil, n exc 1.5 M wide and n exc 1.5 M deep for foundation, etc or for shafts, wells, manholes, laying of cables, etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in hard/dense soil complete all as specified and directed by Engr-in-Charge |
| 5 | Description all as per Ser No 4 above but exc 1.5m depth to 3.00mand getting out in hard/dense soil complete all as specified and directed by Engr-in-Charge |
| 6 | M&L Plain Cement concrete Type D-2, 1:4:8 (40mm graded aggregate),in foundation, filling and mass concrete complete all as specified and directed by Engr-in-Charge |
| 7 | Use & waste of formwork to rough finished surfaces of concrete, form work to sides of plinth beam, footings, bases of columns etc complete all as specified and directed by Engr-in-Charge |
| 8 | M&L for RCC M-25 (design mix) using 20mm graded aggregate as in fdn, footing, plinth beam, bases for columns etccomplete all as specified and directed by Engr-in-Charge |
| 9 | Use & waste of formwork to square or rectangle shape and fair finished surfaces of concrete, to sides of pillars, post , struts etc complete all as specified and directed by Engr-in-Charge. |
| 10 | M&L for RCC M-25 (design mix) using 20mm graded aggregate as in columns etc complete all as specified and directed by Engr-in-Charge |
| 11 | M&L for Formwork to soffits of fair finished suspended slabs such as roof slabs, floor slabs, landings and similar work; n.exc 200mm thick (Horizontal or sloping) etccomplete all as specified and directed by Engr-in-Charge. |
| 12 | M&L for RCC M-25 (design mix) using 20mm graded aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engr-in-Charge |
| 13 | Use & waste of Formwork finished fairto sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc etc complete all as specified and directed by Engr-in-Charge |
| 14 | M &L RCC (design Mix) M-25 (20mm grade aggregate inbeam bressummers, limtels over 1.5m span etc.complete all as specified and directed by Engr-in-Charge |
| 15 | M&L TMT bars 10mm dia and over cut to length, bend to shape required including cranking, bending spirally for hookings for cols, hooking ends and binding with and including mild steel wire (aneeled) not less than 0.9mm dia.complete all as specified and directed by Engr-in-Charge |
| 16 | M&L TMT bars but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.complete all as specified and directed by Engr-in-Charge. |
| 17 | Returning filling in incl spreading leveling, watering and well ramming in layers n exc 25 cm complete all as specified and directed by Engr-in-Charge |
| 18 | M&L Brick work with sub-class "B" bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4complete all as specified and directed by Engr-in-Charge |
| 19 | M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge |
| 20 | M & L Rendering 10 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfacesincluding finishing the surface even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge |
| 21 | M & L Rendering 15 mm thick in cement and sand mortar 1:4 on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing with using integral waterproofing compound @ 3% by weight of cement including finishing the surface even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge (Note -W P C shall be measured and paid separately). |
| 22 | M & L Rendering 5 mm thick in cement and sand mortar 1:3 on fair faces of brick work or cement concrete surfacesincluding finishing the surface even and smooth without using extra cement on ceiling surfacescomplete all as specified and directed by Engr-in-Charge |
| 23 | M&L for preparing newly plastered surfaces of walls , applying two coats of distemper oil emultion, white ot tinted complete all as specified and directed by Engr-in-Charge. |
| 24 | M&L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed by Engr-in-Charge |
| 25 | M&L for preparing newly plastered surfaces of ceilings , applying three coats of white wash complete all as specified and directed by Engr-in-Charge. |
| 26 | M & L for hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and levelled in layers not exce 15 cm thick, watered and rammed to a true surfacecomplete all as specified and directed by Engr-in-Charge |
| 27 | M&L 75 mm thick Cement concrete type D-2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring. |
| 28 | M & L 25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate, including finishing surface of concrete topping even and rough as sub base/ flooring complete all as specified and directed by Engr-in-Charge. |
| 29 | M&L for machine cut kota stone slab flooring 20-25mm thick over 20mm thick cement screed bed in cement mortar 1:3laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engr-in-Charge |
| 30 | M&L kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid including 15mm thick rendering in cement mortar 1:4and jointed complete all as specified and directed by Engr-in-Charge. |
| 31 | M & L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement and sand mortar 1:4, complete all as specified and directed by Engr-in-Charge |
| 32 | M & L Glazed ceramic tile 450 x 300 x 6-7mm thick (coloured) on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick plaster in cement and sand mortar 1:4complete all as specified and directed by Engr-in-Charge |
| 33 | S & F Roof trusses, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.complete all as specified and directed by Engr-in-Charge |
| 34 | M & L Preparation of new steel surfaces of any description over 10 cm width or girth and priming with redoxide zinc chrome and painting with two coats of synthetic enamel paint on Steel sheeting as in roofing complete all as specified and directed by Engr-in-Charge |
| 35 | M & L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as etccomplete all as specified and directed by Engr-in-Charge |
| 36 | M & L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screwscomplete all as specified and directed by Engr-in-Charge |
| 37 | S&F 2nd class soft wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed by Engr-in-Charge |
| 38 | S&F 35mm thickplain framed, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle boarde with commercial veneering onboth faes. The size of rail and stile (second classhardwood)as per IS-1003 (part-I), kiln seasoned and chemically pressure treated , complete all as specified and directed by Engr-in-Charge |
| 39 | S&F 2nd class soft wood glazed and skeleton shutters 35 mm thick , open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed by Engr-in-Charge |
| 40 | S&F Glazed and skeleton shutters thickness 30 mm,(2nd class softwood), open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters supplied and fitted to chowkats if windows, ventilators, etc. are provided with stiles and rails as in SSR Part I, Section specified 8 clause 8.24(b) complete all as specified and directed by Engr-in-Charge |
| 41 | M&L for Preparation of newly or previously untreated wooden surfaces of any description over 10 cm width or girth and priming with pink primer ovdertwo coats of synthetic enamel paint on wooden surfaces complete all as specified and directed by Engr-in-Charge. |
| 42 | S&F 300mm long long aluminium alloy, anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast alouminiu alloy and fixed complete all as specified and directed by Engr-in-Charge |
| 43 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average wide of aperature 1.40mm and fixed with stainless steel wire staples etc complete all as specified and directed by Engr-in-Charge. |
| 44 | S&F 4mm thickSheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane etc complete all as specified and directed by Engr-in-Charge |
| 45 | S & F Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, complete all as shown in drawing of relevant item in MES, schedule Part-II , 2010 etc complete all as specified and directed by Engr-in-Charge |
| 46 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail.Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined togetherwith solvent cement complete all as shown in drawing of relevant item complete all as specified and directed by Engr-in-Charge. |
| 47 | S&F steel ventilators with top hung shutter including hinges steel peg stay, squares no.exc 0.50 Sqm in each pane complete all as specified and directed by Engr-in-Charge |
| 48 | S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed by Engr-in-Charge |
| 49 | S & F Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified and directed by Engr-in-Charge. |
| 50 | S & F Butt hinges, 75 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified and directed by Engr-in-Charged. |
| 51 | S & F Butt hinges, 50 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified and directed by Engr-in-Charge. |
| 52 | S & F 150mm long aluminium anodised, barrel tower bolt ISI marked complete all as specified and directed by Engr-in-Charge. |
| 53 | S & F 100mm long aluminium anodised, barrel tower bolt ISI marked complete all as specified and directed by Engr-in-Charge. |
| 54 | S & F 150mm long aluminium anodised cast typealumiinium handle SI marked complete all as specified and directed by Engr-in-Charge. |
| 55 | S & F 100mm long aluminium anodised cast typealumiinium handle SI marked complete all as specified and directed by Engr-in-Charge. |
| 56 | S & F for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 110 mm bore of pipecomplete all as specified and directed by Engr-in-Charge |
| 57 | S & F for PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm bore complete all as specified and directed by Engr-in-Charge |
| 58 | S & F for PVC (SWR) gully trap, plain with grating including jointing with solvent cement 110 mm bore complete all as specified and directed by Engr-in-Charge |
| 59 | S&F Water closet (Orrissa pattern) complete including provision of lime concrete bedding including vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) in repairs complete all as specified and directed by Engr-in-Charge. |
| 60 | S&F PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet,ball valve, float and handle complete all as specified and directed by Engr-in-Charge. |
| 61 | S & F 600mm x 450mm beveled edge mirror of selected quality glass, mounted on 6mm thick commercial quality ply-wood and fixed to wooden plugs with chromium plated brass screws and cup washerscomplete all as specified and directed by Engr-in-Charge. |
| 62 | S & F 110mm bore PVC (SWR) pipe single sokete any length with rubber ring joints laid in trenches or in floors complete all as specified and directed by Engr-in-Charge. |
| 63 | S & F 75mm bore PVC (SWR) pipe single sokete any length with rubber ring joints laid in trenches or in floors complete all as specified and directed by Engr-in-Charge. |
| 64 | S & F 110mm bore PVC (SWR)bend, plain including jointing with solvent cement complete all as specified and directed by Engr-in-Charge. |
| 65 | S&F 100mm bore PVC (SWR)"T "any radius.complete all as specified and directed by Engr-in-Charge |
| 66 | S & F 110mm bore PVC (SWR) vent cowl, plain including jointing with solvent cementcomplete all as specified and directed by Engr-in-Charge. |
| 67 | S&F 500 Ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engr-in-Charge. |
| 68 | S&F anodised aluminium snap grid of size Size of grid 605 x 605mm frame work for false ceiling angers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm longcomplete all as specified and directed by Engr-in-Charge. |
| 69 | S & F 6 mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws. fixed in ceiling complete all as specified and directed by Engr-in-Charge. |
| 70 | S&F Vitreous Cliina wash basin, wliile, flat back, size 580x450in taps, Plugs (waste 32mm) , chain and plug and porcelain stopper but including brackets etc complete all as specified and directed by Engr-in-Charge. |
| 71 | M & L 75mm thick PCC (1:3:6) type C-2 using 20mm graded stone aggregate as in plinth protection and similar works including finishing the surface of concrete topping even & fair, without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 72 | Supply only integralwater proofing compound complete all as specified and directed by Engr-in-Charge. |
| 73 | Excavation in trenches n.exc 1.5m wide and 1.5m depth for foundation etc or for shaft well, cesspits etc n.exc on plan but exc 1.5m depth and getting out in hard/dense soil complete all as specified and directed by Engr-in-Charge. |
| 74 | Use & waste of Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wideetc complete all as specified and directed by Engr-in-Charge. |
| 75 | S&F Steel door including projecting type hinges, steel handle, complete, with glazing bars, dovetailed or welded complete all as specified and directed by Engr-in-Charge. |
| 76 | S & F PVC connection 15 mm size, of length 450 mm, with PTMT nuts supplied and fixed complete all as specified and directed by Engr-in-Charge. |
| 77 | S&F second class softwood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exc 13 Sqcm and n.exc 25 Sqcm complete all as specified and directed by Engr-in-Charge. |
| 78 | S&F second class softwood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exc 3 Sqcm and n.exc 6 Sqcm complete all as specified and directed by Engr-in-Charge. |
| 79 | M&L for 4mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face has decorative veneer fixed with nails to timber frame work in ceiling etc. complete all as specified and directed by Engr-in-Charge |
| 80 | S&F in repairs pillar taps, 15 mm dia cast copper alloy fency type with capstan heads, chromium plated. screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks & fly nuts screwed for iron pipe.complete all as specified and directed by Engr-in-Charge |
| 81 | S & F soap dish chromium plated, fixed to plugs with chromium plated brass screws, complete all as specified and directed by Engr-in-Charge. |
| 82 | S & Ffor4 mm thickfigured glass pin head ftype andglazing with oil putty in squares n.exc 0.5 sqm in each pane.complete all as specified and directed by Engr-in-Charge. |
| 83 | Excavation in post holes (or similar holes) each n.exc 0.5cum getting out, returing, filling in and raming earth/broken rubble mixed with earth around, in layers n.exc 25cm, watering and removing surplus soil to a distance n.exc 50m and making good surface in soft/loose soil. |
| 84 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165complete all as specified and directed by Engr-in-Charge. |
| 85 | S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe-290 (Gde E-165)complete all as specified and directed by Engr-in-Charge. |
| 86 | S&F3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipesof 16mm outer diaSDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed by Engr-in-Charge. |
| 87 | Description all as per Ser No 86 above but 20mm outer dia complete all as specified and directed by Engr-in-Charge |
| 88 | Lgging to 20mm bore pipe exposed PPR tubing all around (incl provisions of lagging on pipe fitting ie., unions, elbows, nipples, tees etc) with 40mm thick bonded mineral wood performed "SNAP ON" pipe section of density 144 Kg/Cum confirming to IS-9842 with chicken mesh wire netting 25 gauge, 20mm mesh with 0.01 mm aluminium foil complete all as specified and directed by Engr-in-Charge. |
| 89 | M&L for Bib taps, cast copper alloy chrominium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixedcomplete all as specified and directed by Engr-in-Charge. |
| 90 | S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engr-in-Charge. |
| 91 | S&F Chromium plated shower roses 125mm dia with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed by Engr-in-Charge. |
| 92 | S&F Stop valves, cast copper alloy but fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-Charge. |
| 93 | S&F Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed to 15mm bore of pipecomplete all as specified and directed by Engr-in-Charge. |
| 94 | S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed to 20mm dia bore pipe complete all as specified and directed by Engr-in-Charge. |
| 95 | M&L for 75mm thick cement concrete type C-2, 1:3:6 (40mm graded agrregate) as insub base of floors, finished even and fair over well/rammed/complete all as specified and directed by Engr-in-Charge. |
| 96 | S & F Chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors including screed bed 15mm thick comple in CM 1:4 complete all as specified and directed by Engr-in-Charge. |
| 97 | M & L cement concrete type B-1, 1:2:4 (using 20mm graded aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed by Engr-in-Charge. |
| 98 | S&F 10 User LLDPE septic tankconventional designed to carry sewae and sludge water, excavation in any type of soil,PCC 1:4:8 below foundation, vent shaft connection etc complete all as specified and directed by Engr-in-Charge. |
| 99 | Construction of Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M-25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 2.4m dia and 3m depth.complete all as specified and directed by Engr-in-Charge |
| 100 | M&LPCC 1:3:6 type C-2 using 40mm graded stone agg in foundation and mass concrete. complete all as specified and directed by Engr-in-Charge |
| 101 | M & L Brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specified and directed by Engr-in-Charge. |
| 102 | M & L1:2:4 types B-1 (using 20 mm graded stone agg) as in coping etc complete all as specified and directed by Engr-in-Charge. |
| 103 | M&Lfor 150 mm dia Reinforced concrete pipes, class NP2, laid and jointed completewith collars etc complete all as specified and directed by Engr-in-Charge |
| 104 | M&L for concrete bed to drain pipes in PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate including packing under haunching against the sides of pipe after they are laid and tested for 150mm dia etc complete all as specified and directed by Engr-in-Charge |
| 105 | M&L for for rendering 15mm thick in CM 1:4 onfair faces of brick work or concrete surfaces and finished surfaces even and smooth complete all as specified and directed by Engr-in-Charge. |
| 106 | M&L for Cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in surface channels, drains etc complete all as specified and directed by Engr-in-Charge. |
| 107 | M&L for extra for forming fair faces (finished) drain of channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitered stopped end etc complete all as specified and directed by Engr-in-Charge. |
| 108 | M & L precastRCC man holes cover in cement concrete 1:2:4 type B-1 using 20mm graded stone aggregateetc complete all as specified and directed by Engr-in-Charge.. |
| 109 | M&L for PCC 1:3:6, Type C-2 (40mm graded aggregate) as in fdns, filling and mass concrete etc etc all as specified and directed by Engr-in - charge. |
| 110 | M & L for walling of radom rubble uncoursed well bonded solidily hearted builtin CM 1:4 etc complete all as specified and directed by Engr-in-Charge. |
| 111 | M&L for rendering 15mm thick in cement mortar 1:4 onon stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing including finishing to surfaces even and smooth without using extra cement etc complete all as specified and directed by Engr-in-Charge. |
| 112 | M&L for extra stone walling for hammer dressing in faces stones of random rubble walling uncoursed fro granite or trap stone etc complete all as specified and directed by Engr-in-Charge. |
| 113 | M&L for cement concrete type C2, 1:3:6 (40mm graded aggregate) as in surface channel and drains complete all as specified and directed by Engr-in-Charge. |
| 114 | M&L for providing precast cement concrete type B-1, 1:2:4 (20mm graded aggregate) and set in cement mortar 1:6in landings, cover slabs (for manholes/ drain cover)etc complete all as specified and directed by Engr-in-Charge. |
| 115 | Supply & FixingGI tubing, medium grade, ISI marked complete with all fittings, laid in trenches or laid under floors, fixed on walls with and providing clamps etc size 25mm dia bore complete all as specified and directed by Engr-in-Charge. |
| 116 | Supply & FixingGI tubing, medium grade, ISI marked complete with all fittings, laid in trenches or laid under floors, fixed on walls with and providing clamps etc size 20mm dia bore complete all as specified and directed by Engr-in-Charge. |
| 117 | S & F in repair of stop valves/gate valves, cast copper alloy, screwed down, crutch or butterfly handle with high pressure, screwed both ends for iron pipe orunions and fixed complete including taking down of old onesuitableforsize 25 mm diacomplete all as specified and directed by Engr-in-Charge. |
| 118 | Supply and laying XLPE insulated PVC FRLS, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area, galvanized steel strip or wire armoured, of size 16 Sqmm 2 Core complete all as specified and directed by Engr-in-Charge |
| 119 | Supply and laying XLPE insulated PVC FRLS, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area, galvanized steel strip or wire armoured, of size 10 Sqmm 2 Core complete all as specified and directed by Engr-in-Charge |
| 120 | Supply and spreading clean dry sand in trenches for cushioning all as specified for cable protection complete all as directed. (Note: The punned down thicknessshall only be measured) |
| 121 | Supply and laying sub class "B" bricks laid across the cable for cable protection complete all as specified and directed by Engr-in-Charge. |
| 122 | M&L for road cutting for passing XLPE UG Cable including GI pipe 40mm dia light grade and making good to the disturbed surface with PCC 1:4:6complete all as specified and directed by Engr-in-Charge. |
| 123 | S&F Sirens Electronic type horizontal single stage, Single Phase 240V, covering 5 KM area suitable running in AC/DC complete all as specified and directed by Engr-in-Charge. |
| 124 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 4 Sqmm nominal cross section complete all as specified and directed by Engr-in-Charge |
| 125 | Supply and fix GI pipe, bracket for street light fittings made out of 32/40 mm dia GI Pipe light grade 1.2m long bent to required angle/shappe with and including necessary clamps of 03 sets necessary nuts, bolts & washers of suitable size and painting with two coats of aluminium paint over a coat of red oxide primer complete all as directed . |
| 126 | Supply and fixing LED street light fitting 100 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. |
| 127 | Supply & fixing cubical type hot pressed moulded SMS of size 250 x 200 x 100 mmSintex SMC/FRP juction box for street light pole mounted terminal box suitable for mounting on round poleand suitable arrangement for fixing bracket complete with one MCB SPN 6-10 amps capacity single pole and 200A Busbar SPN suitable to terminate loop in/out cables upto 35 sqmm complete all as specified and directed by Engr-in-Charge. |
| 128 | Supply and fix cable PVC insulated unsheathed of size 2.5 Sqmm 3 core copper conductor for service connections from junction box to security light fitting complete all as specified and directed by Engr-in-Charge. |
| 129 | M & L for cement concrete for foundation fillings and mass conctere type D2 1:4:8 using40 mm graded aggregate complete all as specified and directed by Engr-in-Charge. |
| 130 | M & for cement concrete for foundation fillings and mass conctere type C2 1:3:6 using 40 mm graded aggregate complete all as specified and directed by Engr-in-Charge. |
| 131 | Point wiring with 1.5 Sqmm multistrand, FRLS copper conductor cable, PVC insulated and unsheathed, drawing in and including PVC concealed conduit 20 mm dia medium grade ISI marked with all accessories such as bends, elbows reducers, pressed steel/ MS terminal boxes factory made 1.6 mm thick dully painted in rectangular shape appropriate size (having wall thickness of conduit not less than 2.00 mm) for one light/ fan point controlled by one 5 Amps switch one way, covered with 3 mm thick plastic laminated sheet top cover for mounting switches, sockets requlators etc and continous PVC insulated and unsheathed 1.5 Sqmm copper conductor cable multistrand as earth wire,complete all as specified and directed by Engr-in-Charge. |
| 132 | All as per sel item No. 131 above but 3 pin 5 Amp switch socket outlet on same board complete all as specified and directed by Engr-in-Charge |
| 133 | All as per sel item No. 131 above but 3 pin 5 Amp switch socket outlet on independent board complete all as specified and directed by Engr-in-Charge. |
| 134 | All as per item No.131 here in before but for one 15 Amps power point on the independent board with two runs of PVC insulated and unsheathed copper conductor cable of size 2.5 sqmm multy stranded, FRLS grade and 2.5 sqmm PVC insulated unsheathed solid copper conductor cable FRLS grade as earth lead. complete all as specified and directed by Engr-in-Charge |
| 135 | Supply and fixing LED lights fittings 1x20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-Charge. |
| 136 | Supply and fix ceiling rose 3 terminal / PVC/ Polycarbonate, isolated bodycomplete all as specified and directed by Engr-in-Charge. |
| 137 | S&FLamp holder, PVC/Polycarbonate type with back plate having matching colour to holder suitable for angle/batten fittings (ISI marked) complete all as specified and directed by Engr-in-Charge. |
| 138 | S&F LED light fitting 1x10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge |
| 139 | S&F exhaust fan, steel body AC single phase, 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and directed by Engr-in-Charge |
| 140 | S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230V, 1200mm sweep BEE 5 star rated with brushes direct connect motor complete all as specified and directed by Engr-in-Charge. |
| 141 | S&FLED bulb of capacity10 watts (ISI marked) complete with all accessories base complete all as specified and directed by Engr-in-Charge. |
| 142 | S&F Switch piano flush button single pole one way 5 Amps, complete all as specified and directed by Engr-in-Charge. |
| 143 | S&F switch piano Flush type, single pole, 15 amp 240 volts, complete all as specified and directed by Engr-in-Charge. |
| 144 | S&FSocket outlet 2 in 1, 3 pin, 5 Amps, flush type complete all as specified and directed by Engr-in-Charge. |
| 145 | S&FSocket outlet 2 in 1, 3 pin, 5and 15 Amps, flush type complete all as specified and as directed by engr in charge. |
| 146 | Supply and fix sheet metal enclosures for DBs when MCBs to used single pole & neutral (SPN) double door 240 volts,8 way incl. 200 Amp bus bar and neutral link (ISI marked) complete all as specified and directed by Engr-in-Charge. |
| 147 | Supply and fix sheet metal enclosures for DBs when MCBs to used single pole & neutral (SPN) double door 240 volts,4 way incl. 200 Amp bus bar and neutral link (ISI marked) complete all as specified and directed by Engr-in-Charge. |
| 148 | Supply and fixing MCB SPN 32 Amps, 240V, 10KA "C" curve and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed by Engr-in-Charge. |
| 149 | Supply and fixing MCB SP 6-32 Amps, 240V, 10KA "C" curve and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed by Engr-in-Charge. |
| 150 | S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2KW capacity 25 litre, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed by Engr-in-Charge. |
| 151 | Material and labour for earthing complete with galvanised steel earth plate electrode 60cmX60cmX6.0mm thick, buried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of the plate not lessthan 1.5mtr below normal ground level connected to GI earth strip of size 32x6 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron complete earth pit of PCC M-10(Nominal mix) using 20mm graded stone aggregate, 50mm thick earth pit cover of RCC M-15 (Nominal mix) using 20mm graded stone aggregate with MS TMT reinforcement bar of 8mm dia @ 150mm centre to centre both ways, MS handle 10mm dia made to shape, GI funnel, wire mesh and 20mm bore GI water pipe light grade and 40mm bore light grade GI pipe for protection of earth strip from plate to main switch board, common salt, charcoal dust including testing on completion complete all as specified and as directed all as shown in electrical plate No. 3 including testing on completion and making good the disturbed surfaces of wall floors etc without claiming extra cost all as directed by Engr-in-Charge. (Note: GI strip & GI pipe beyond 7.5Mtr length from earth electrode shall be measured and paid separately) Completed all as specified and directed by Engr-in-Charge |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
