Bharat Sanchar Nigam Limited-BSNL has published Tender For Provision Of Glass Made Showcase And Other Miscellaneous Civil Works At Ground Floor Central Stair Side Position At Telephone Bhawan Kolkata 2Nd Call. Submission Date for this Tender is 24-04-2024. Civil Work Tenders in Kolkata West Bengal. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 18-Apr-2024 | Corrigendum | Other | 24-04-2024 |
Sl. No. | Item Description |
1 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. |
2 | Cement mortar 1:4 (1 cement :4 coarse sand) |
3 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. |
4 | 1.5 mm thick. |
5 | Providing and fixing plain lining with necessary screws/nuts & bolts/nails including a coat of approved primer on one face and fixed on wooden /steel frame work, complete as per direction of Engineer-in-charge. (Frame work shall be paid for separately) |
6 | 12mm thick commercial ply conforming to IS : 1328 BWR type. |
7 | Providing and fixing 4 mm thick charcoal panel board in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality including cost of adhesive of approved quality as per design and direction of Engineer-in-charge. |
8 | Providing and fixing wall shelf by 19 mm commercial ply of century or greenply make or equivalent including all necessary screws and fittings as per design and direction of Engineer-in-charge. |
9 | Providing and fixing bright finished Chromium plated brass handles of length 450 mm with screws etc. complete |
10 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS : 15622 , of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. |
11 | Size of Tile 600x600 mm |
12 | 12 mm cement plaster of mix : |
13 | 1:4 (1 cement: 4 fine sand) |
14 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
15 | Two or more coats on new work. |
16 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
17 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. |
18 | Two coats. |
19 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. |
20 | With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. |
21 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
22 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
23 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
24 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
25 | a) For fixed portion (i) Powder coated aluminium (minimum thickness of powder coating 50 micron) |
26 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors ,embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. |
27 | With stainless steel cover plate minimum 1.25 mm thickness. |
28 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc. to be paid separately). |
29 | Providing and fixing 12 mm thick frameless toughened glass in partition with all necessary clamps and fittings as per design and direction of Engineer-in-charge. |
30 | Providing and fixing glass shelf at wall using 12 mm thick toughened glass with all necessary screws, clamps and fittings as per design and direction of Engineer-in-charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail