HSS T-SLOT CUTTERHEAD DIA 11 MM X WIDTH4 MM X SHANK DIA10 MMX TOTAL LENGTH MIN 50 MM CONFORMING TOIS 2668TOOL TYPE-N MAKE ADDISON/ DORMER/ SANDVIK/ ISCAR/ KENNAMETAL/WALTER/SECO/ TITEX/YG/FORBES-TOTTEM
2
80815179
HSS T-SLOT CUTTERHEAD DIA 21 MM X WIDTH 9 MM X SHANK DIA 12 MMX TOTAL LENGTH MIN 70 MMCONFORMING TOIS2668 TOOL TYPE-NMAKE ADDISON/ DORMER/ SANDVIK/ ISCAR/ KENNAMETAL/ WALTER/ SECO/ TITEX/YG/FORBES-TOTTEM
3
80815242
HSS T-SLOT CUTTERHEAD DIA 32 MM X WIDTH 14 MM X SHANK DIA25 MMX TOTAL LENGTH MIN 85 MM CONFORMING TOIS2668 TOOL TYPE-NMAKE ADDISON/ DORMER/ SANDVIK/ ISCAR/ KENNAMETAL/ WALTER/ SECO/ TITEX/YG/FORBES-TOTTEM
4
80702089
HSS ( M 42-HSS MATERIAL WITH 8 % COBALT) IS 6175 GROUND THREAD MACHINE TAPS WITH SPIRAL FLUTES TO PROVIDE SMOTH ENTRY AND EXIT TO ELEMINATE BURR FOLDING, UP TO 46 HRC SIZEM 2.5 X 0.45 MM CLASS 6H MAKEADDISON/ DORMER/ SANDVIK/ ISCAR/ KENNAMETAL/ WALTER/ SECO/ TITEX/YG/FORBES-TOTTEM
5
80713104
H.S.S(M2) GROUND THREAD HAND TAP,SET OF 2 OR 3 PIECES SIZEM5.0X0.5,TOLERENCE CLASSHMAKE ADDISON/ DORMER/ SANDVIK/ ISCAR/ KENNAMETAL/ WALTER/ SECO/ TITEX/YG/FORBES-TOTTEM
6
80713113
H.S.S(M2) GROUND THREAD HAND TAPSET OF 2 OR 3 PIECESSIZEM6.0X0.5,TOLERENCE CLASS6H,MAKEADDISON/ DORMER/ SANDVIK/ ISCAR/ KENNAMETAL/ WALTER/ SECO/ TITEX/YG/FORBES-TOTTEM
7
80713145
HSS(M2) GROUND THREAD HAND TAPSET OF 2 OR 3 PIECES SIZEM80X05TOLERENCE CLASS6HMAKEADDISON/ DORMER/ SANDVIK/ ISCAR/ KENNAMETAL/ WALTER/ SECO/ TITEX/YG/FORBES-TOTTEM
8
80713161
HSS(M2) GROUND THREAD HAND TAP SET OF 2 OR 3 PIECES SIZEM10X05TOLERENCE CLASS6HMAKE ADDISON/ DORMER/ SANDVIK/ ISCAR/ KENNAMETAL/ WALTER/ SECO/ TITEX/YG/FORBES-TOTTEM
9
80713164
HSS(M2) GROUND THREAD HAND TAPSET OF 2 OR 3 PIECES SIZEM10X1 TOLERENCE CLASS6HMAKEADDISON/ DORMER/ SANDVIK/ ISCAR/ KENNAMETAL/ WALTER/ SECO/ TITEX/YG/FORBES-TOTTEM
SOLID CARBIDE END MILL BALL NOSE DIA 4.0 MM WITH PARALLEL SHANK HELIX ANGLE 38-45 DEG, TO CUT THE MATERIAL HARDNESS UP TO 45 HRC SIZEDIA. 4.0 MM, SHANK DIA. 6.0 MM FLUTE LENGTH6 MMRADIUS2.0 MM TOTAL LENGTH65 MMTOLERANCE ON FLUTE LENGTH0.5D,TOLERANCE ON TOTAL LENGTH,
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
